Browse by Types

Nazar, Nur Athirah Syuhada (2024) Establishment of local diagnostic reference level (LDRLS) for digital mobile radiography in neonate population. Project Report. Universiti Sains Malaysia. (Submitted)

Hamsir, Hazrul Haniff (2024) Dosimetric analysis of standard tandem plus ring applicator in high dose rate (HDR) brachytherapy for cervical cancer: TLD measurement in phantom. Project Report. Universiti Sains Malaysia. (Submitted)

Zhen, Kong Wei (2024) Experimental study of optically stimulated luminescence (OSL) dosimetry to the dose perturbation of 6MV photon beam in the presence of metal objects. Project Report. Universiti Sains Malaysia. (Submitted)

Yuan, Koo Xing (2024) Quantitative and qualitative studies of extrinsic and intrinsic uniformity on gamma camera detectors using co-57 flood source & tc-99m point source: experimental and clinical studies. Project Report. Universiti Sains Malaysia. (Submitted)

Hao, Lau Lik (2024) Quantitative study of iterative reconstruction algorithms of spect/ct in bone scan: a clinical and phantom study. Project Report. Universiti Sains Malaysia. (Submitted)

Malek, Nur Syazwany (2024) Percentage depth dose (PDD) of 9 MEV electron beam in the medium with the presence of inhomogeneous tissue by using optically stimulated luminescence dosimeter (OSLD), EBT3 film and ionization chamber. Project Report. Universiti Sains Malaysia. (Submitted)

Zafrin, Nurizzatul Hadawiyah Mohamed (2024) Classification of glioma brain tumors in mr images using imagej-based radiomic analysis. Project Report. Universiti Sains Malaysia. (Submitted)

Ham, Fatina Ham Yahya (2024) Automatic detection of calcifications in breast cancer diagnosis based on machine learning classifiers. Project Report. Universiti Sains Malaysia. (Submitted)

Mohd Salleh, Muhamad Mursyid (2023) Sebuah Analisis Mengenai Peranan Dan Kesan Gerakan Masyarakat Dalam Mengubah Landskap Politik Di Malaysia. Project Report. Pusat Pengajian Sains Kemasyarakatan. (Submitted)

Isa, Nurfazlina (2022) Evaluation Of Sediment Transport Equation In Southeast Asia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sharil Azuar, Wan Nur Syahidah (2022) The Study Of Cement Properties With Ceramic Waste Fillers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Sabri, Nur Shauqina (2022) Properties And Performance Of Natural Rubber Latex (NRL) Band: A Scavenging Medium To Capture Microplastic Waste In Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkarnain, ‘Aainaa Shahirah (2022) Application Of Hallimond Tube For Flotability Study Of Magnetite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hadi, Muhammad Muhaimin Azhad Noor (2022) The Assessment Of Fire Risk Rating Based On Uniform Building By-Law (Ubbl) For Buildings In Usm Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Badrul Hisham, Alya Nabilah (2022) Numerical Investigations On Sprue Configuration For Multi-Cavity Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Au Yong, Huey Leen (2022) Investigation Of Silver Oxide Nanoparticles In Polymannose Thin Film On Resistive Switching Characteristics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Azman, ‘Aisyah Mardhiah (2022) Alkaline Treatment Of 3D Printed TI-AL-V Alloy For Bioactivity Surface Modification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Bahaudin, Aishah Shamimi (2022) Investigation Of Boron Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amanda Kwok, Si En (2022) Electrochemical Characterization Of Tin Electrode In Synthetic Seawater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chai, Pei Ying (2022) The Effect Of 3D Printing Parameters On The Properties Of Thermoplastic Polyurethane Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Christina Chin, Kai Qi (2022) Investigation Of Encapsulant Discoloration Mechanism In UV/Blue Light-Emitting Diode With Copper Hybrid Particles Filler Using Taguchi Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Poul Dawas, Emiellia (2022) The Effects Of Printing Parameters On The Tensile Properties Of 3D Printed Thermoplastic Polyurethane (TPU) Via Fused Deposition Modeling (FDM) Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariff, Mohamad Fitri Azim (2022) Preliminary Study On Fabrication And Characterization Of Compatibility HA/TPU Composite Filament For Bone Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Nur Iylia Ayuni (2022) The Effect Of Surface Property Towards Bacterial Biofilm Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Toh, Jia Min (2022) Preparation And Characterization Of Self-Healing Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd. Saad, Nuraizul Azren (2022) Correlation Of Blast Design And Ground Vibration During Blasting At Imerys (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Jafri, Nurul Husna (2022) Effect Of Skim Latex On Mechanical Properties Of Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Hong Liang (2022) Electrodeposition Of Copper On Stainless Steel For Solid Oxide Fuel Cell Interconnect Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zawawi, Nur’ain Syakirah (2022) Fabrication And Characterization Of Electrospinning Biodegradable Fabric Layer For Face Mask Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Oung, Hor Yen (2022) Study On Water-Soluble Polymers For Biomedical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Din, Shamin Aida (2022) Application Of Feldspar Filler On Curing Characteristics And Physical Properties Of Elastomeric Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Maijin, Richell (2022) Mineral Characterization Study of Gold Deposit in Tawau, Sabah Focusing on Mineralogy and Geochemistry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Jabar, Muhamad Hafizuddin (2022) Processing Of Red Gypsum Using Hyddrocyclone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Idrus, Nurul Athira (2022) Evaluation Of Mechanical And Interfacial Properties Of Kenaf Filler/Poly (Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Afiqah Adriana, Roslan (2022) Application Of Unmanned Aerial Vehicle (UAV) Photogrammetry Method For Rock Mass Rating Analysis Of A Rock Slope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khairulnizan, Hazman Arif (2022) Mineral Characterization Of Cassiterite Ore From Selected Area In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Akhir, Mohamad Adli (2022) Physical And Chemical Characterization Of Clay Deposits For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Afif Hafizhan (2022) Study On Reclycing Of Industrial Steel Waste In The Production Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Shamsuddin, Hanis (2022) The Effect Of Voltage And Time On Oxide Nanotubes Of Titanium Alloy By Anodizing For Metal Implant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad Sabri, Muhammad Iman Rif’at (2022) The Effect Of Marine Fouling And Seawater Corrosion On Doped Titanium Nitride Electrode. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Saudi, Nabilah (2022) Hydrophobic Polytetrafluoroethylene (PTFE) Coating On Endoscopic Lenses Via RF Magnetron Sputtering Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mohd Khairol Anuar, Nur Afifah Hayani (2022) Effect Different Ratio Of Soda Feldspar And Potash Feldspar On The Properties Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Ariff, Ummi Fatisya Ain (2022) Characterization Of β-TCP Coated On Stainless Steel 316. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Syed Hussin, Azrina (2022) Study Of Clinker Grindability From YTL Cement, Kanthan, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zaiful Bahari, Siti Khairina (2022) Study Of Water Quality In Sungai Kereh: Analysis On The Effluent Discharged From Kampung Selamat Based On The Requirement Standard. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wu, Chuen Li (2022) Acid Based Accounting (ABA) For Acid Mine Drainage Prediction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nurul Izzah, Abd Bashid (2022) Characterization Study Of Malaysian ION-Adsorption Clay NR-REE (Non-Radioactive Rare Earth Element). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammad, Anis Najihah (2022) The Effect Of Tannic Acid Crosslinker On The Properties Of Kenaf Fibre And Polyvinyl Alcohol Binder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tang, Zi Jie (2022) Effect Of Halloysite Nanotubes On The Performance Of Self-Healing Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamarujaman, Nur Maisara (2022) Surface Modification Of 45S5 Bioactive Glass Microspheres For Drug Delivery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rafindi, Nurrafiq Arina (2022) Removal Of Cadmium And Chromium Using Titanium Dioxide Nanowires Under Ultraviolet Radiation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Haris, Nuradrina (2022) Sequential Leaching Of Malaysian’s Ion Adsorption Clay Rare Earth Element. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Bukhori, Muhammad Aiman (2022) Physicochemical Characterization And Diagnostic Leaching Of Complex Copper-Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahisham, Zahira Sofiya (2022) Geochemistry And Petrography Characterization Of Ordovician Devonian Limestone Formation In Kinta District, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hasbullah, Nurul Anis (2022) Surface Interactions Of Polymer Nanoparticles In Waxy Crude Oil Model System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Muhammad Hamizan (2022) Lead Removal Through The Adsorptions Of Reactivated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Dinno, Nur Dianna (2022) Nutrient Removal Efficiencies In A Bioretention Cell Using Pre-Treated Coconut By-Product As Carbon Source. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Rahmat, Nuruljannah (2022) Effect On Compatibility And Graphene On Shape Memory And Tensile Properties Of Polylactic Acid (PLA)/ Ethylene Vinyl Acetate (EVA) Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Yusoff, Nurulaini (2022) Transforming Dental Mould Waste (DMW) Into High Purity Calcium Source By Chromium Removal Through Alkaline Caustic Leaching (ACL) Using Ultrasonic Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Priscilla, Tong Shuen_ (2022) Synthesis And Characterization Of Rankinite From Rice Husk Ash And Eggshells. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zam Hariro, Aini Yusriena (2022) Effect Of Controllable Parameters On Rock Fragmentation At Imerys Mineral (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Azman, Nadiah Adlin (2022) A Comparative Study Of Different Collectors In The Flotation Of Rare Earth Mineral. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Merdan, Fathin Atiqa (2022) Ammoniacal Cyanide Leaching Of Complex Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Jalil, Nurhanisah (2022) Comparison Analysis Of Rock Fragmentation After Blasting Between Imagej Analizer And Wipfrag Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamed Jawhar, Mohammad Taufiq (2022) Hot Corrosion Behaviour Of Slurry Aluminide Coating In Molten Alkali Salts. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Idris, Muhammad Yusran Azim (2022) Tensile Properties And Water Absorption Of Mineral Fillers Filled Polylactic Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Nor Asim, Muhammad Danial Haziq (2022) Characterization & Separation Of Tungsten In Cassiterite (Tin Middling) From Bukit Kachi Mine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Halim, Mohammad Aminuddin (2022) Simulation Study Of Clinker/Grinding Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Muhammad Afiq Ariff (2022) Effects Of Geological Properties Of Limestone Formation In Blasting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Din, Muhamad Nur Iman Syafaat (2022) Bio-Based Oil As A New Rubber Processing Oil In Development Of Green & Sustainable Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheang, Mun Kit (2022) Mechanical Properties And Biodegradability Of Carboxylated Nitrile Butadiene Rubber Reinforced With Cellulose Nanocrystals. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kalai Selvam, Devah (2022) Hot Dip Galvanizing Of Zn-Al-WO3 Coating On Mild Steel: Effect Of Surface Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hiew, Wai Kien (2022) Development Of Diffusion Barrier-Forming Coating For High-Temperature Application: Effect Of Coating Duration And Bath Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kiong, Yuen Yee (2022) Hydrothermal Synthesized Zinc Oxide Nanoparticles With Manganese Doping For Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Salleh, Shaharatul A’ini (2022) Investigation Of Oxidation Process On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tang, Yi Tian (2022) Investigation Of Phosphorus Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zurainee, Nurul Izzaty (2022) Polyurethane Binder For Mxene Electrode Fabrication Of Hybrid Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lai, Kher Wei (2022) Reactivation Of Ion Exchange Resins For Water Treatment Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yong, Rui Huang (2022) Multi-Stages Synthesis Of Calcium Hydroxide Particles From Malaysian Limestone By Sol-Gel Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tneh, Kin Man (2022) The Effect Of Adding Silver Nanoparticles In Tin Surface Finish Electroplated With Ultrasonication On Wettability And Strength Of SAC305 Solder Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Farzana (2022) Effect Of Ball Clay Addition In Slip Casting In Making Of Gloves Former. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hor, Bing Yao (2022) Effect Of Agitation To Electroless Nickel Plating Of NiP/Ag Nanocomposite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, See Kay (2022) Recycle And Synthesis Green Reduce Graphene Oxide From Spent Battery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Salleh, Siti Norfatihah (2022) Safety Culture Awareness Of Laboratory Activities Among Universiti Sains Malaysia (USM) Engineering Students. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Guan, Min Li (2022) Post Annealing Treatment Of TiO2 Nanotubes For Defective Black Oxide Formation And Application In Heavy Metal Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Gan, Soon Xin (2022) Preliminary Study Of Dicalcium Phosphate Dihydrate Coated 45S5 Bioglass Granule. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kok, Kai Lin (2022) Synthesis And Characterization Of Magnesium Oxide Nanomaterials Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Loo, Ji Yu (2022) Tin Nanoparticles Modified Electrode For Simultaneous Detection Of Cadmium (Cd) And Lead (Pb) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Guan Sheng (2022) Synthesis And Characterization Of Titanium Dioxide Particles By Direct Heating Technique For Photodegradation Of Methylene Blue Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Yong, Hui Sin (2022) Surface Oxidation Of CU Extracted From Electronic Waste For CUO Nanowires Formation And Their Use To Reduce CR(VI). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Siew Min (2022) Microstructure And Kinetic Growth Of Aluminide Coating On 304 Stainless Steel By Slurry Aluminizing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tengeo, Chee Ying (2022) Gold And Bismuth Nanoparticles Modified Electrodes For Simultaneous Detection Of Pb(II) Ions, Cd(II) Ions And Cu(II) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheong, Yi Huan (2022) Effect Of Fullerene (C60) Concentration In Pectin Polysaccharide Thin Film For Resistive Switching Characterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Huan, Jia Yee (2022) Effect Of Fused Deposition Modeling (FDM) Parameters On The Warpage And Different Composition Polylactic Acid/Ethylene-Vinyl Acetate Blend. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Musa (2022) Deformation Behaviour Of Metallic Cellular Structure Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shea Wen, Lee (2022) Powered Stretcher For Patient Transfer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Thian, Yoke Teng (2022) Water Absorption And Hygrothermal Aging Behavior Of Kenaf Fiber-Reinforced Poly(Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheng, Wen Cai (2022) Effects Of Hybridization Of Graphene Oxide And Halloysite Nanoclay On The Oil Absorption Of Polyurethane Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, Eyann (2022) Numerical Study On The Effectiveness Of Homogeneous Multiphase Volume Of Fluid (VOF) Model In Rubber Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sim, Yeap Feong (2022) Development Of Photo-Curable PMMA-Based Liquid Resin: Dispersibility Study Of Go And Ago In PMMA-Based Liquid Resin And Mechanical Analysis Of Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ismail, Nur Azwahana (2022) Simulation Of Check-In Passenger Flow For International Departure Due To Covid19 Situations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Seah, Ying Zhi (2022) Characterization Of Honey As Active Thin Film For Resistive Switching Memory Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Harizi, Muhammad Hafizam Afiq (2022) Data Mining Analysis Of Chronic Kidney Disease (CKD) Level. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Kai Chen (2022) Product Design And Development Using Virtual Reality And CAD/CAM System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Zaini, Mohamad Zulhisyam (2022) Potential Failure Mode In Pergau Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Norridzwan, Ahmad Syamil (2022) Fabrication Of Porous Calcium Sulphate By Using Yeast As Pore Foamer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Razali, Aisyah Awanis (2022) Hybrid Effect And Stacking Sequence On Mechanical And Morphological Properties Of Flax/Glass Fiber Reinforced Epoxy Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Imbau, Arnold (2022) Preliminary Study Of Self-Setting 45S5 Bioglass Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Jaffri, Ju Liyana (2022) Effect Of Water Absorption Towards Mechanical And Physical Properties Of Hybrid Flax/Glass Fiber Laminated Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Fadzil Akmar, Nur Humairah (2022) Impact Of Different Ultrasonic Frequencies On Precipitation Process Of Dicalcium Phosphate Dihydrate Coated Hydroxyapatite Granular Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Yu, Kai Chun (2022) Tensile And Impact Properties Of Mineral Fillers Filled Poly(Lactide) Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Anor, Nur Ilmadiena (2022) Experimental Study Of The Effect Of Granite Cutting Waste As Partial Replacement Of Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Md Zan, Siti Rohaidah (2022) A Comparative Study On The Effect Of Chemical Additives On Clinker Grinding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Soon, Li Jie (2022) Preparation And Characterization Of Hydrophobic Polyurethane Coating For Steel Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Boey Wei (2022) Study On Mechanical, Biodegradability And Compostability Of Agriculture Waste Loaded Biodegradable Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mahadi, Nurul Amirah (2022) Bioactivity Improvement Of 45S5 Bioglass Through Calcium Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ang, Chai Pin (2022) Effect Of Multi-Wall Carbon Nanotubes On The Performance Of Self-Healing Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Fishal, Nur Fitrah (2022) Numerical Investigation On The Polymer Flow In A Restriction Flow Path. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Atan, Mohd Nidzam Adha (2022) Structure-Properties Relationship Of Open Cell Ethylene Vinyl Acetate Foam For Sound Insulation Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ho, Yue Cheng (2022) Development And Characterization Of Chitosan-Cellulose Nanofiber Hydrogel Scaffold For Tissue Engineering Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Za’i, Mohamad Zulhakimi Haiqal (2022) Fine Grinding Of Silica Via Stirred Milling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azizan, Muhammad Ikhram Hakim (2022) Characteristic Of Silica Sand From Kuantan, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Nur Ain (2022) Recovery Of Copper From E-Waste Via Hydrometallurgy Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azlan Shah, Siti Nuraqilah (2022) Aluminium Pollution In Sediment Of Perai River, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zamri, Nur Hazwani (2022) Application Of Hallimond Tube For The Flotability Study Of Pure Scheelite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Rahim, Muhammad Anwar (2022) Characteristic And Potential Of Perlis Carbonate Rock In The Downstream Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nazatul Dzahir, Nurul Fatin Nazira (2022) Study Of Malaysian Rare Earth Elements: Mineral Characterization Of Monazite And Xenotime Concentrate From Amang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wing Foong, Chin (2022) Effects Of Graphene Oxide Coating On The Properties Of Polyurethane/Nanofiller Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Rashid, Nor Shafikah (2022) A Novel Waterborne Coating Based On Styrene-Acrylic Copolymers For Construction Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Samsul Baharin, Massara (2022) Properties & Characterisation Of The Halochromic CMC-PEG Hydrogel Film. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mahyudin, Muhammad Luqman Hakim (2022) Development Of Smart Polybutylene Adipate Terephthalate (PBAT) Blending For Plant Pot Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Syamil Akhyar (2022) Fabrication Of 3D Biodegradable PBAT/PLA Blends Electrospun Nanofiber For Cardiac Patch Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mustakim, Ainaa Shafirah (2022) A Study Of Aluminium Window Frames Preference Materials Among Property Buyers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ali, Abdul Safiq Mohamed (2022) A Study Of Flow Induced Vibration At Hydraulic Physical Modellingof Kenyir Dam Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rashid, Anis Adriana Mohd (2022) Assessment Of Horizontal Migration Behavior Of Light Non-Aqueous Phase Liquid (Lnapl) At Capillary Fringe Due To Fluctuating Groundwater Table And Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mayadi, Farah Hanim M Nor (2022) Investigation On The Sound Absorption Properties Of Gigantochloa Ligulata Bamboo. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Keesan, Farhain Afiqah Mohd (2022) A Study Of Flow Characteristics Along Atawau Spillway Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Theenathayalan, Durgeshwar (2022) Analyzing The Risks P-Hailers Face On The Road. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shubandrio, Fuad Dellany (2022) Assessing The Interdependency Between Critical Infrastructures During Seismic Incidents A Case Study For Padang City. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Daniel, Lim Wei Ping (2022) Effect Of Consideration Of Seismic Design On Cost Increase Of Regular Layout Reinforced Concrete High Rise Buildings In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Aniq Syahmi (2022) Identification Of Effective Technique To Estimate Water Loss In Water Supply Scheme A Case Study Of Usm Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhani, Aidatul Aznuraini Aidil (2022) Determination Of Bukit Merah Reservoir Capacity Using Sequential Peak Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kudubudin, Amirul Al-Amin Mohamed (2022) Effectiveness Of Coffee Residuals As Green Roof Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Arumugam, Harshaan (2022) Preliminary Assessment On The Distribution Of Heavy Metal Within Chenaam Estuary Using Gis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamisan, Ifa Shafiqa (2022) The Capability Of Gigantochloa Scortechinii Bamboo As Sound Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Ewe Loon (2022) A Systematic Literature Review On The Efficiency Of Heat Reflective Asphalt Pavements To Reduce Urban Heat Islands. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yasser, Karam Shamdeen (2022) Development Of Cost-Efeffective Demonstration Hydraulic Physical Model Of Debris Flow. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zakaria, Iqmal Aiza (2022) Effectiveness Of Bod Removal From Domestic Sewage In Constructed Wetland Using Pilot Scale Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isman, Intan Shafinaz (2022) Flood Risk Mapping Using Ahp Method A Case Study For Meru, Klang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bakar, Amir Syazwan Abu (2022) Mechanical Properties Of Concrete With Different Types Of Glass Waste As Cement Replacement Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulmahdi, Zuraini (2022) Mechanism Of Pore Water Pressure And Groundwater Fluctuation In Slope Stability Under Heavy Rainfall Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Roshar, Mohamad Syarees (2022) Influence Of Drop Size Distribution And Kinetic Energy In Laboratory Rainfall Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Unpublished)

Ares, Mohammad Danial Farhan Mohamad (2022) Correlation Of Schmidt Hammer Rebound Numbers And Knocking Ball Stiffness Parameters For Sedimentary And Metasedimentary Rocks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bahari, Mohamad Taqif Saipol (2022) Numerical Investigation On The Effect Of Wind Pressure On Skillion Roof Using Computational Fluid Dynamics (Cfd). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Habib, Mohammad Faizul Aman Mohammed (2022) Mapping The Walkability Of Main Campus, Universiti Sains Malaysia Using Geographic Information System (Gis). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zahir, Mohd Khairul Akmal Md (2022) Empirical Shear Force Capacity And Stiffness Model Of The Cross-Formation Screw Connections In Timber– Concrete Composite Structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mahmoud, Mostafa Ahmed Sayed Ahmed (2022) Structural Behaviour Of Asymmetrically Designed Timber-Concrete Hybrid Buildings With Different Roof Materials Subjected To El Centro Earthquake Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazim, Muhamad Faiz Mohamad (2022) Evaluation Of Pre-Evacuation Behavior Among Students And Staff In Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Maenah, Mud (2022) Water Quality Index (Ammoniacal Nitrogen, Biochemical Oxygen Demand, Chemical Oxygen Demand) Assessment In Sungai Kereh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Roslan, Muhamad Amir Idham (2022) Biosorption Of Colour In Landfill Leachate Using Acid Pre-Treated Hydrilla Verticillata. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jawari, Muhammad Faiz Ahmad (2022) The Effect Of Roof Slope On The Wind Pressure Distribution Of A Low-Rise Mono-Pitch House Using Cfd Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nurdin, Muhammad Ezam (2022) Safety And Health Management At Construction Site Of Building Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zamzuri, Muhammad Amir Hakimi Mohd (2022) Evaluation Of Safety Awareness And Perception Of Wayfinding Tools Among Students And Staff In Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sham, Muhammad Harisfarhan Mohd (2022) Experimental Study On Mechanical Strength And Performance Of Gigantochloa Ligulata Bamboo (Buluh Mata Rusa) Joints. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rahim, Muhammad Ibrahim Khalili Abd (2022) Experimental Study On Mechanical Strength And Performance Of Gigantachola Schortechinii Bamboo (Buluh Semantan) Joints. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Idrus, Mohd Firdaus Ahmad (2022) The Decomposition Process Of Food Waste For Organic Fertilizer Production At Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hazri, Muhammad Hadi (2022) Prediction Model of Shear Force Capacity and Stiffness of the Connections in Timber-to-Timber Composite structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sayuti, Muhammad Mursyidi Ahmad (2022) Investigation Of Wind Load Effect On Butterfly Roof Of Low Rise Building Using Computer Fluid Dynamic (Cfd) Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Karib, Muhammad Izzuddin Mohd (2022) Heavy Metal Distribution In Suspended Load And Bed Load At The Perai River. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mahyuddin, Muhammad Nurul Ihsan (2022) Effects Of Fly Ash As A Cement Replacement Material For Self-Healing Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Najib, Muhammad Nauwar Amir (2022) The Influence Of Crystalline Admixtures Inclusion On Self-Healing Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Idris, Nurul Najihah Mohd (2022) The Efficiency Of Landfill Leachate Treatment By Adsorption Process With Biochar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rahman, Nurul Natrah Abdul (2022) Characterization Of Coconut Husk As Adsorbent For Methylene Blue Dyes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Anuar, Auji Aseela (2022) Study On Indoor Particulate Matter (Pm2.5) In Hostel Rooms Of Universiti Sains Malaysia Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hameed, Azreen Arifah Shahul (2022) The Role Of Road Safety Inspection Towards Ensuring Forgiving Roads In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Affendi, Ahmad Zaid Ahmad (2022) Removal Of Pharmaceutical Compounds Using Photocatalysis On Ferric Oxide Doped Titanium Dioxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nadia Syahiera (2022) Evaluation Of The Masonry Concrete Arch Structural Response And Prediction Of Crack Using Non-Contact And Contact Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yacob, Najihah Mohamed (2022) Willingness To Pay Extra Charge For Increasing Safety While Using Public Transport Post Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Othman, Muhammad Zaki (2022) Assessment Of Riverbank Stability In Perak River Induced By Unsustainable Sand Mining Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ngo, Uk Doong (2022) Extending The Service Life Of Asphalt Pavements Via Phase Change Materials A Systematic Literature Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozali, Nor Shawani Mohamad (2022) Sediment Transport Analysis Of Teluk Kepayang Using Hec-Ras. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shari, Noraini (2022) Effectiveness Of Allium Tuberosum And Allium Fistulotum As Cover In Improving Green Roof Water Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fauzi, Nur Alia Ahmad (2022) A Systematic Literature Review Bending Failure In Cold-Formed Steel Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Daud, Nur Aina Syamilah (2022) Landfill Leachate Treatment By Coagulation Flocculation Using Tween80. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nasaruddin, Norazura (2022) Adoption Of Green Building Technology (Gbt) In Managing Covid-19 Risk For Public Facilities Improvements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akma, Nur Farahiza (2022) Adsorption Treatment Of Pulau Burung Sanitary Landfill Leachate Using Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azman, Nur Athirah Nor (2022) Kinetic Aggregation And Settling Properties Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Synthetic Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shamsudin, Nur Dhaniah Athirah (2022) Effect Of Floating Plant Growth Rate On Water Quality Performance Of Wetland In Treating Domestic Sewage. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamaludin, Nur Faizah (2022) Assessment Of Indoor Particulate Matter (Pm2.5) In Newly Renovated Rooms At School Of Civil Engineering Building , Usm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiew, Ming Jie (2022) Cost Analysis For Earthquake Resistance Design Of Reinforced Concrete High Rise Office Building In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hakim, Raul (2022) A Systematic Literature Review(Slr) On The Utilizationof Ultra-High Performancefibre-Reinforced Concrete(Uhpfrc) For Repair And Strengthening Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdrabou, Youssef Salaheldin Hegazy (2022) Effectiveness Of Waiting Area For Motorcyclists At Signalized Intersection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagarajan, Sarmila (2022) Critical Success Factors Of The Green Building Implementation In Malaysian Construction Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagarajan, Sarmila (2022) Critical Success Factors Of The Green Building Implementation In Malaysian Construction Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulmahdi, Zuraini (2022) Mechanism Of Pore Water Pressure And Groundwater Fluctuation In Slope Stability Under Heavy Rainfall Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Effendi, Nurul Farah Syafiqah Mohd (2022) Geospatial Mapping Of Selected Heavy Metals Based On Land Use Within Kinta River Catchment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rawawi, Rawaidatul Alifah Mohd (2022) Influence Of Microencapsulated As A Concrete Self-Healing Agent Containing Sodium Silicate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sekhar, Thanesh Naidu (2022) Heavy Metals Distribution In Water At Perai River. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dasthagir, Nur Hidayah (2022) Soil Stabilization Method By Using Natural Bamboo Fibre. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Qing Long (2022) Recovery Of Titanium Dioxide (Tio2) From The Photocatalysis Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Nur Syazana (2022) The Incorporation Of Multi-Lane Free Flow System Need Analysis And Challenges. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zaulkifli, Norsyafina Anita (2022) Sediment Transport Study At Pendiat, Sungai Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yeo, Li Qun (2022) Migration Behavior Of Light Non Aqueous Phase Liquid (Lnapl) At Unsaturated Zone Due To Precipitation And Fluctuating Groundwater Table. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Jou Wyn (2022) Experimental Study On Powder Coated Surface With Polydur Zinc Based Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Habidin, Mohamad Ridzuan (2022) 3D Scanner App For New Product Development Due To Covid-19 Endemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Muhammad Farid Amirul (2022) Experimental Study On The Impact Of DBD Plasma Actuator Geometry And Electrical Input On Thrust Generation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Salleh, Muhammad Safwan (2022) Simulation Of Flexible Capacitive Strain Sensor For Food Packaging Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Yong Quan (2022) Finite Element Analysis Of Pull-Out Performance Of Bone Screw. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifili, Al Azim Faiz (2022) Design Of Kenaf Fiber Polymer Composite For Interior Car Door Panel Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ramlan, Nur Diyana (2022) Comparison Of Bio-Oil And Synthetic Lubricants Tribological Characters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zalkapli, Muhammad Amir (2022) Nanoindentation Of Copper Thin Film On Silicon Substrates. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajogoval, Illayakantthan (2022) Mining The Basic Reproduction Number (R0) Forecast For The Covid Outbreak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Murugaya, Thivines (2022) Design And Development Of Robot End-Effector For The Use In Lower-Limb Stroke Rehabilitation Exercises. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ganesan, Devesh Raj (2022) A Predictive Classification Model For Running Injury. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajenthiren, Sharaneish (2022) Numerical Analysis Of Polymer Melts Flow Behaviour In Grooved Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chai, Chang Yuan (2022) Analysis Of Heat Treatment Effect On Tensile Properties Of 3D Printed Carbon Fiber Composite And Comparing Mechanical Properties On Manufacturing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhan, Anis Masturina (2022) Reduce Manufacturing Lead Time Through PDCA And Waste Elimination In Metal Casting Company: A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rohizam, Rajeeha (2022) Cycle Time Improvement Of Combined Punching And Drilling Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Zahari, Ahmad Amirul (2022) Controlling An-Inverted Pendulum System Using A Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Liew, Jin Fung (2022) Simulation Of Passenger Flow For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hashim, Nur Amanina Ayuni (2022) Witness Simulation Of Machine Breakdowns For Small, Medium And Large Aircrafts During Turnaround Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With TiO2 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zainal Abidin, Nur Sarah (2022) Evaluation Of Sound Absorption Of Micro Perforated Panel Made By Palm Oil Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Zie Jen (2022) Vibration-Fatigue Assessment On Electronics Interconnections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Basirah, Aiman (2022) Analysis Of Micro Generator Performance From Porous Media Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sekar, Sageein (2022) Development Of Affordable Full Body Isolation Pod. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Jason, Edwin (2022) Non-Linear Contact Finite Element Analysis Of Split Hopkisnon Tensile Bar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ganiashan, Eesvaran (2022) Structural Integrity Investigation Of SAC305 Lead Free Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chan, Jian Siang (2022) Performance Of Combustion Chamber For Micro Gas Turbine (MGT) Application Running On Palm Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Guan Kai (2022) Effects Of Air Inlet Angle On The Combustion And Emission Characteristics Of A Cylindrical Chamber Fueled With Waste Cooking Oil Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chin, Jiun How (2022) Performance Comparison Of AFC-CA, AFC-GA, AFC-PSO And AFC-NN In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Zi Hui (2022) Heat Dissipation Enhancement Using Staggered Fin Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ang, Cheau Hui (2022) Deformation And Stress Analysis Of 3D Printed Spanner Wrench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chow, Hong Man (2022) Effect Of Different Biodiesel Blends On Engine Performance, Emissions And Combustion Characteristics Under Various Engine Torques And Speeds Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismadi, Nurul Syamimi Zahirah (2022) Aerodynamic Design Of A Roof Fairing For Trucks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusman, Muhammad Syafiq Farhan (2022) Fatigue Life Prediction For Small Component Welds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azaman, Amirul Fahmi (2022) The Effect Of Hydrogen Diffusion In Orthodontic NiTi Archwire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Anuar, Muhamad Shafiq (2022) Design And Development Of Internet Of Things (IoT) Based System For Monitoring Energy Consumption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Shaberi, Mohamad Nazhan (2022) Biomechanical Evaluation Of Spinal Loadings During Oil-Palm Plantation Tasks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamid, Mohamad Idham (2022) Experimental Study Of Building Materials Made Of Waste Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Munisuaran, Kishen (2022) Performance Comparison Of Steam And Air-Steam Gasification Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Osman, Muhamad Nazmi (2022) Conceptual Analysis Of Lean Principles And Tools In Manufacturing Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Fadlhlin Sakina (2022) Compressive Properties Of Jute/Kevlar Under Static And Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Khoo, Boon Sheng (2022) Development Of A Virtual Vehicle Identification For Tracking Hit-And-Run Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Noor Ariffin, Siti Syairah (2022) Tribological Study Of Additive Manufactured Aluminium Alloy ER5356 For Potential Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Muhammad Syafiq (2022) Design Of A Miniature Axial Blower For A Portable Thermal Comfort System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tay, Ying Keat (2022) Evaluation Of Turbidity Measuring Using IoT Based Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Raja Gobal, Hehgeraj (2022) Study Of Deformation And Crack Propagation On Component During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamidi, Muhammad Nafiz (2022) Micropitting And Wear Assessment Of Roller Bearing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shamsul Khair, Nurul Syifa’ (2022) Effect Of Ageing Treatment On Force-Deflection Behaviour Of NiTi Wire In Three-Point And Three-Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hussin, Muhamad Amirul Aiman (2022) Comparative Assessment Of Air-Cooled And Water-Cooled Thermoelectric Power System “Simulation Approach”. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhar, Muhammad Asyraf (2022) Miniature Specimen Fracture Toughness Testing: A Concise Review. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Mutalib, Nurul Rafika Amira (2022) Analysis Of Grease Degradation Under Elastohydrodynamic Lubricant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad, Mohd Zuhair (2022) Analysis Of Martensitic Transformation And Bending Deformation Of NiTi Arch Wire Against Different Deflection And Temperature Range. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Moustafa Hebish, Anas Ahmed Moustafa Moustafa (2022) Optimization Of Mild Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kamar Shah, Noor Fajwa (2022) Study And Analysis Of Piezo Bender For Energy Harvesting Application Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zubir, Zulfahmi (2022) Bioelectricity Generation Of Glycerine Waste In Microbial Fuel Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhamad Fikri, Jaafar (2022) Shell Eco-Marathon Fuel Consumption Engine Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yassine Mahamat, Ibrahim Mahamat (2022) Effect Of Transition Taper Length On Air-Filled Substrate Integrated Waveguide Losses. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abd Ghani, Muhammad Muzakkir (2022) Micro Pitting And Wear Assessment Of Spur Gear. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nabli, Muaz (2022) Predictive Analysis Of Demand Of Electric Vehicles In Malaysia And Its Potential. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Muhammad Naim (2022) Characterization Of Strain Hardening Three Dimensional Crack-Tip Stress Field. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zubir, Muhammad Syukri (2022) Effect Of Epoxy Materials And Gold Wire Number On Led Encapsulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Ahmad Fazlullah (2022) Finite Element Analysis Of Bending Delamination In Multilayer Circuit Boards PCBs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Razak, Mohamad Noorhazim (2022) Study On Different Parameters Of An Inertia-Type Piezoelectric Actuator In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chuah, Siong Wei (2022) Experimental Study Of Desiccant Material Pressure Drop. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Aziz, Siti Nuha Majiddah (2022) Design And Fabrication Of Flexible Strain Sensor For Food Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhar, Mohamad Amiruddin (2022) 1D Multigrid Solver For Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Pozai, Nurul Natasha Aiza (2022) Experimental Modelling And Control Of Linear Actuator For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With Ti02 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Khaizi, Aini Syazwina (2022) A Pilot Study Of Heat Stress Risk Evaluation While Wearing Personal Protective Equipment Suit In A Tropical Climate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Kwan Hue (2022) Fiber Misalignment Effect On Compressive Properties Of Jute And Kevlar Composite Under Impact And Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ragupathy, Rohendran (2022) Experimental Study Of Heat Transfer Rate On Acoustic Liner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chen, Tze Xiang (2022) Development Of Polymer Nanocomposite-Based Coating For Corrosion Protection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tharumaalingam, Vimalraj (2022) Fuel Consumption And Fuel Economy Of Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ilias, Izzah Nadhilah (2022) Automatic Additive Manufacturing Product Generation Through Computer Aided Process Planning Using 3D/4D/5D Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Gun, Yong Yin (2022) Optimization Of 3D Printing Of Shape Memory Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Alauden, Muhammad Rafiq (2022) Characteristics Study Of Emulsified Biofuel And Egg Yolk Oil (EBEYO) Properties And Its Performance In Compression-Ignition Engine Using New Formulated Surfactants And Composition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Munusamy, Sharven (2022) Development Of A Portable Low Strain Rate Testing Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Roslee, Muhammad Sharifuddin (2022) Investigating The Performance Of Metaheuristics To Optimize The Revenue Of Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azmi, Nurul Atiqah (2022) Corrosion Of Nanocomposite Sn/Ag Coating On Copper Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hooi, Khey Herng (2022) Effects Of Fin Length And Fin Valley On The Performance Of Bus Duct Conductor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Md Sukri, Muhammad Ahnaf Ataulah (2022) Design And Testing Of Patient-Specific Ankle Foot Orthosis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razak, Abang Muhammad Farith (2022) Optimization Of Flameless Cyclone Combustion Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mynn Wei, Teoh (2022) Detection And Counting Of E. Coli On Specialized Test Piece Using Yolo v4. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wei Tong, Koh (2022) Air-Drill With Accelerometer And Microphone For Composite Drilling Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Derrick Chew, Hsien Nam (2022) Synthesis Of MnO2 For Surface Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liong, Kai Min (2022) Synthesis And Characterization Of Aluminium Based Nanomaterials Using Direct Heating Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Gang Yang (2022) Removal Of Pollutants Using Nanostructured Tungsten Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Zhuang Min (2022) Synthesis Of Metal Oxide Coupled TiO2 Photocatalyst Particles For Enhanced Photodegradation Of Rhodamine B Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamso, Nurul Syazni (2022) Physical And Chemical Characterization Of Granitic Rock For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Adzaman, Amir Faisal (2022) Study On The Rock Quality Designation (RQD) And Groundwater Cavity Of The Kuala Lumpur Limestone Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lim, Chow Peei (2022) Utilization Of Plasticizers And Lubricants Derived From Palm Oil On Rheological And Mechanical Properties Of Styrene Butadiene Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Saril, Muhammad Amin (2022) Identification On Mineralogical And Mechanical Properties Of Rock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nordin, Muhammad Nor Akmal (2022) Effects Of Oil Palm Plantation Tasks On Skeletal Muscle Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad, Ikmal Nor Haikal (2022) Assesstment Of Water Quality Around Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Andyappan, A Helan R (2022) Hydrolysis Of Waste Cooking Oil By Free Candida Rugosa Lipase. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rohaimi, Ahmad Firdaus Mohamad (2022) Reactive Distillation Simulation For Production Of Methyl Acetate Kinetic Model Parameter Optimization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zainal, Danial Syakirin (2022) Batch Adsorption Of Amoxicillin On Coconut Shell Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chong, Yian Sing (2022) Synthesis Of Polyvinyl Alcohol Multiwalled Carbon Nanotubes Composites For Malachite Green Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Murthi, Bohesharvind Naraiyanan (2022) Degradation Of Oxytetracycline From Aquaculture Wastewater Using Sole Ozonation And Catalytic Ozonation In The Presence Of Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chen, Yi (2022) Quaternary Aqueous Biphasis Mixture For Enzyme Extraction From Banana. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Au, Jia Yu (2022) Preparation Of Biochar From Palm Oil Mill Effluent (Pome) Sludge By Microwave Pyrolysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Jamaludin, Amierul Hafiezam (2022) Preparation And Characterization Of Activated Carbon From Oil Palm Trunk Fiber By Chemical Activation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Baharom, Amiranordiana (2022) Recovery Of Oil From Palm Oil Mill Effluent (Pome) As Biodiesel Feedstock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ismail, Halimatusaadiah (2022) Coconut Husk Based Activated Carbon Produced Via Sodium Bicarbonate Activation For Chloramphenicol Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Fadzil, Haiekal Mustaqim Mohd (2022) Statistical Modeling And Optimization Of Process Parameters For 2,4-Dichlorophenoxyacetic Acid Removal By Using Ac Pdmaema Hydrogel Adsorbent Comparison Of Different Rsm Designs And Ann Training Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Goh, Zi Qi (2022) Chemically Treated Bamboo With Sodium Hydroxide And Potassium Hydroxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Goh, Jian Loon (2022) Greywater Treatment Using Modified Pvdf Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saravanan, Gayathri (2022) A New Approach Of Application Of Superhydrophobic Coating On Cultivation Of Giant Duckweed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Aziz, Mohamad Fazrul Ikmal (2022) Tamarind Seed Based Activated Carbon Prepared Via Cufe Layered For Caffeine Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azhar, Emillia Eizleen Md (2022) Statistical Modeling And Optimization Of Process Parameters For 2,4-Dichlorophenoxyacetic Acid Removal By Using Ac Pdmaema Hydrogel Adsorbent Comparison Of Different Rsm Designs And Ann Training Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Halim, Farah Zahidah Abd (2022) Microalgae Granulation Correlation Between Microalgae Growth And Eps Content. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Heah, Joo Yee (2022) The Effect Of Glucose Concentration On The Biotransformation Of Valencene To Nootkatone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

How, Mun Cheng (2022) Smartphone-Assisted Microscopic Imaging Prediction Of Mass And Chlorophyll Contents In Duckweeds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Faudzi, Inas Irdina Mohd (2022) Superhydrophobic Pvdf Nmp Caco3 Nanoparticles Membrane For Membrane Filtration Of Oil Water Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kumeren, Isswar Senthil (2022) Hydrothermal Carbonization of Dried Leaves as Adsorbent for Removal of Chloramphenicol compounds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

James, Law Kah Chun (2022) Macroscopic Fluid Flow Of Low Gradient Magnetophoresis Through Cellulose Matrix. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Li Ying (2022) The Removal Of Oil From Oil-In-Water Emulsions By Modified Kapok Fiber With Hydrochloric Acid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Law, Ji Pin (2022) Batch Adsorption Study For Removal Of Chloramphenicol Using Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Xing Yii (2022) Palm Shell Based Activated Carbon Modified By Cufe Layered For Amoxicillin Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajandram, Logaisri (2022) Emulsion Ionic Liquid Membrane For Ibuprofen Removal From Synthetic Wastewater Using Aliquat 336. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Raman, Logan Raj (2022) Conversion Of Oil Palm Empty Fruit Brunch (Opefb) Into Hydrochar Via Hydrothermal Carbonization And Study On The Suitability For Soil Ammendment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ali, Maisara Adleena Mohd (2022) Immobilized Lipase Catalysed Esterification Of Formic Acid And Methanol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Loganya, Supramaniam (2022) Aerogel Coating On The Copper Mesh As Superhydrophobic Porous Layer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Loh, Loh Li Sin_ (2022) Quaternary Aqueous Biphasic Mixture For Protein Extraction From Papaya. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Shahidan, Mohd Syakir (2022) Training Simulator Batch Polystyrene Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Sher Wen (2022) Final Design Improvement Of Replica Trophy From Prototype To Mass Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ezra Tan, Yi Chyn (2022) Philosophical Tools Of Lean Six Sigma In Service Sector: Implications For Organisational Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Arzuan, Muhamad Zulhelmi Nor (2022) Colorimetric Detection Of Heavy Metal Ions Using Silver Nanoparticles Synthesized From Alpinia Galanga. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ngo, Shi Hui (2022) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Pei Wen (2022) Mechanical Properties Of Porous NiTi Shape Memory Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Nizar, Luqman Haikal (2022) Innovative Tool For Composite Machining In Aerospace Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nadzri, Faiz Farhan (2022) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Nurul Asyiqin (2022) Correlating Parameters With Hydrogen Purity And Recovery By Psa In Hydrogen Purification From Syngas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Razaman, Noor Suhaila (2022) Decolourization Of Brilliant Green Dye In Aqueous Media By Using Modified Mof-5 Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Salleh, Nabihah Mat (2022) Effect Of Temperature Towards Membrane Fouling By Microalgae Algal Organic Matter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zaharum, Nurul Hanisarina (2022) Elucidating Electrochemical Properties Of Suitable Polymer Coated On Carbon Electrode To Detect Heavy Metals. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zol, Nur Adlin Mohd (2022) Harvesting The Nutrients From Fish Farm Effluent Via Ultrafiltration Process As Foliar Spray. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkifli, Nurul Nabielah (2022) Immobilization Of Different Chromophores On Cellulose Acetate Butyrate Flat-Sheet To Detect Heavy Metal Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Kah Hoe (2022) Physical, Mechanical, and Chemical Characterization of Two Sympodial Bamboos (Gigantochloa Ligulata & Gigantochloa Scortechinii) & Their Potential for Construction Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Navieen, Murugaiah (2022) Piper Betle Leaves Extract As A Green Corrosion Inhibitor For Aluminium In Acidic Medium Characterization And Evaluation Of Antioxidant, Phenolic And Flavonoid Content. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suntharam, Nanthini Mohana (2022) Removal Of Zinc (Ii) Ions From Industrial Wastewater By Activated Carbon Synthesized From Mangrove (Rhizophora Mangle). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ramli, Nor Hairie (2022) Study Of The Parameter Interaction In A Closed_Loop Control Of A Process Intensification System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Roslan, Nurfarah Arina (2022) Toxic Gas Dispersion Model Based On Neural Pattern Recognition Networks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Oh, Hong Keat (2022) Development Of Modified Mof-5 Towards Enhancing Malachite Green Dye Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ooi, Qian Hui (2022) Experimental Study On The Solvent-Free, Non-Catalytic Synthesis Of Ethyl Acetate By The Esterification Of Ethanol With Acetic Anhydride In A Coiled Flow Inverter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Zhao Yang (2022) Development Of Machine Learning User Interface For Pump Diagnostics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sattigamurti, Thibbaganesh (2022) Synthesis And Performance Of Ordered Mesoporous Sno2 Using Kit-6 Nanocasting For Detection Of Hydrogen Sulphide Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkifli, Umy Aliya (2022) Biotransformation Of Valencene Utilizing Yarrowia Lipolytica In Buffer Systems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teh, Yoong Sin (2022) Colorimetric Detection Of Heavy Metal Ions Using Green Synthesised Silver Nanoparticles From Curcuma Xanthorrhiza Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chelvan, Shaila Pannir (2022) Correlating Parameters With Methane Purity And Recovery By Pressure Swing Adsorption In Methane Enrichment From Biogas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Manogaran, Sathis Kumar (2022) Demulsification Of Emulsion Effluent Using Modified Palm Oil Fuel Ash (Pofa). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Shafee, Muhammad Amirul Farhan (2022) Predictive Analysis Of Ice, Hybrid And Electric Vehicle: Selected Case Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kumaresan, Vengdasan (2022) Dynamic Simulation Of Continuous Polystyrene Reactor Using Python. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teoh, Wei Xin (2022) Hydrothermal Carbonisation Of Papaya Peels As Adsorbent For Removal Of Chloramphenicol Compounds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Makin, Mohamad Zainul Wafak (2022) In-Situ Transesterification Of Micro Algae To Fatty Acid Methyl Ester (Fame) Process Control And Optimization Study Using Aspen Plus Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Khir, Siti Shahanis Mohd (2022) Modification Of Copper Mesh To Achieve Superhydrophobic Surface. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Wee Hui (2022) Production Of Hydrochar-Based Catalyst From Oil Palm Trunk Via Hydrothermal Carbonization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Hafni, Aidil Azwadi (2022) Mechanical-Physical Properties Characterization Of Alternative Materials For The Application In Highway Guardrail. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teo, Yao Aik (2022) Removal Of Sulfate From Biodiesel Production Wastewater Through Hybrid Oil-Water Filtration And Gypsum Precipitation-Nanofiltration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zakree, Syed Muhammad Al Hafiz Syed (2022) Synthesis And Characterization Of Zinc Oxide Nanoparticles Using Ascorbic Acid For Evaluation Of Antioxidant Activity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yee, Qian Hui (2022) Design And Development Of A Flight Operator Safety Audit System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kabeer, Saiful Munir Sultan Syed Ahmad (2022) Synthesis Of Zinc Oxide Nanoparticles Using Gallic Acid Characterization And Evaluation Of Antioxidant Activity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Si Ying (2022) Developing A Discrete-Event Simulation Model For Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Omar, Mohammad Shafiq (2022) Meso-Scale Modelling Of Pultruded Hybrid Composite Under Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamed Ghouse, Muhammad Suffi Fazari (2022) Simulation Of Cantilevered Piezoelectric Energy Harvesters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nordin, Ahmad Faris (2022) Lean Premixed Pre-Vaporized Combustion In A Swirl Stabilized Liquid Fuel Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Nor Halimuddin, Normalyana (2022) Three-Dimensional Elastic-Plastic Crack Tip Stress Fields. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azmin, Abdul Rahman (2022) Experimental Study Of Water Based Air Conditioning System For Space Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusri, Akmal (2022) Stress-Strain Behaviour Of Conductive Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mokhtar, Mohamad Dzul Asyraf (2022) Development Of Omnidirectional Drive System Using Mecanum Wheels For Patient Transfer Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Faizal, Muhammad Faris (2022) Simulation Of Multistage Cascaded Thermoelectric Generators With Adaptive Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Johar, Muhammad Faris Zamir (2022) A Study On The Potential Of Tin Recovery From Iron Ore Tailing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ismail, Iman Firdaus (2022) Development Of Soft And Flexible Filament For 3D Printing Of Anatomical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Shamsul, Aida Syafiqah (2022) A Systematic Literature Review Bolted Connection Failure In Cold-Formed Steel Beam-To-Column Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghazali, Anis Hanim (2022) Empirical Model Of Shear Force Capacity And Stiffness Of Shear-Tension Screw Connections In Timber-Concrete Composite Structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jelani, Hafizzul Hazzim Shah (2022) The Potential Of Paddy Husk As Sound Absorber In Concrete Mixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Kai Jet (2022) A Comparative Study On Perceived Accident Risk Among The Cyclists, Motorcyclists And Drivers In The Mixed Traffic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Teik Jin (2022) Effect Of Geometry On Stress In Pile Head Of Rc Sheet Pile Under Vertical Impact Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Meow, Lian Ke (2022) Engineering And Microstructural Characterization Of Marine Clay Treated With Cement And Lime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tajudin, Mifzal Thaqif Md (2022) Characterization Of Oil Palm Frond And Bamboo As Adsorbent For Methylene Blue Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Allias, Muhammad Afiq Na’imullah (2022) Development Of Integrated 3-Dimensional And Virtual Reality Digital Outcrop Model Of Sedimentary Rock Slope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamidi, Muhammad Azfar (2022) A Study On The Effect Of Spur Dike On The Formation Of Sand Bar In A Rectangular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rusli, Muhammad Ikmal Ahmad (2022) Removal Of Fats, Oils, And Grease From Food And Beverages Wastewater By Using Sono-Electrocoagulation Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Muhammad Umar Mohd (2022) Seismic Vulnerability Assessment Of An Rc-Frame Building Exposed To Different Direction Components Of Ground Motions Using Nonlinear Dynamic Analysis And Fragility Function. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khan, Muhammad Nasri Nasehir (2022) A Flow Pattern Study Of Temenggor Dam Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Kai Qi (2022) Application Of Okra (Abelmoschus Esculentus) Mucilage-Based As Natural Coagulant In Domestic Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Kai Qi (2022) Application Of Okra (Abelmoschus Esculentus) Mucilage-Based As Natural Coagulant In Domestic Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Suhaimi, Nik Siti Ayeesha Nik (2022) Feasibility Study Estimation Of Water Usage In USM Engineering Campus Hostels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Lit Phin (2022) The Advancement Of Energy Harvesting From Road Pavements A Systematic Literature Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tarmizi, Nur Farah Izzati Mohd (2022) A Systematic Review Compression Failure In Cold-Formed Steel (Cfs) Column Sections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zan, Sazrul Ariff Mat (2022) Evaluating The Potential Benefits Of Permeable Paving Surfaces To Improve Stormwater Runoff Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shafei, Siti Nurbaini Mohd (2022) Effectiveness Of Bamboo Panel In Reducing Sound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Hong Yang (2022) Cost Evaluation On The Effect Of Adopting Different Shear Wall Arrangements For Rectangular Office Building Under Seismic Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruddin, Nurain Soleha (2022) Impact Of Sand Mining On Sg. Perak River Morphology Using Geographical Information System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jeff Fei (2022) Evaluation Of Fiber Reinforced Asphalt Mixtures And Sensitivity Analysis For Airport Pavement Maintenance And Rehabilitation Practices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Si, Kian Shen (2022) Influence Of Admixtures On The Properties Of Extrudable Concrete For 3d Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Husain, Sharmira (2022) Thermal Comfort & Its Relation To Ventilation Approaches In The Main Prayer Hall Of Mosque & Hostel Room, USM Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yeoh, Chun Xian (2022) Numerical Simulation Of Mudflow Interaction With Sabo-Dam By Using Two Dimensional Depth-Averaged Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Ling Chi (2022) Synthesis Of Titanium DioxideZeolite Catalyst And Treatment Of Sulfamethoxazole. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nurhafizah Abdul (2022) Water Pipeline Network Analysis Of Usm Engineering Campus Using Watergems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chandran, Dhiwakar (2022) Corncob Modified By Cufe Layered For Oxytetracycline Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Karthigesan, Velautham (2022) Synthesis Of Chitosan-Multiwalled Carbon Nanotubes Nanocomposite For The Removal Of Remazol Black B Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Salleh, Nor Suriani Husni (2022) Fear and stress regarding COVID-19 among nursing students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Jasni, Nurshazwani (2022) Anxiety, stress, and related factors in pregnant women during the COVID-19 pandemic in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zaidi, Nurul Izzah Muhamad (2022) Prevalence and associated factors of constipation among hospitalised adult patients in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Khairuddin, Nurul Nadzirah (2022) Relative caregivers’ satisfaction towards nursing care of neuro patients in Hospital Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zaid, Siti Nur Aisyah (2022) COVID-19 vaccine acceptance among pregnant women in Hospital USM. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Asri, Siti Syakirah Mohd (2022) Awareness and practice of anemia prevention among antenatal women in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Md Shahrudin, Mohamad Aqriel Shazwan (2022) Filem Mat Kilau Dan Kebangkitan Konservatisme Melayu. Project Report. Pusat Pengajian Sains Kemasyarakatan. (Submitted)

Singh, Suraj (2022) Combustion Characteristics Study Of Low Grade Producer Gas From Carbonized Empty Fruit Bunch (EFB) Briquettes Gasification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Wen Kai (2022) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Adrian Lim, Zan Kuang (2022) Characterization Of Natural Resin And Synthetic Resin In Fiber Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Awang Mansor, Muhammad Adib Haikal (2022) Analysis Of Design Of An Intervention Oil Palm Sickle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Samsu, Muhammad Ariffin (2022) Process Optimization Of Biomass Combustion Of An Industrial Boiler In A Palm Oil Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Dhiwya, Paramasivam (2022) Removal Of Humic Acid From Water Using An Ozonation Alone And Combination Of Ozonation And Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Husin, Iqbal Aiman Kamal (2022) The Effect Of Nanocellulose On PVDFCarbon Black In The Fabrication Of Conductive Thin Films For Electrochemical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yaacob, Jeredraj (2022) Biodiesel Production Using Waste Cooking Oil Energy Optimization Study Using Pinch And Heat Exchanger Network HEN Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Siew Li (2022) Role Of Microalgal Organic Matterderived Biocoating Towards Cell Deposition In Natural Biofilm Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Runnizam, Muhaimin Hazmi Khai (2022) Oil-From-Water Removal Under Low Gradient Magnetic Separation (LGMS). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sahrani, Muhamad Ikhwan Mohd (2022) Synthesis And Performance Ordered Sno2 Using Sba-16 For Detection Of Dangerous Gases. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zambri, Muhammad Ridzuan (2022) Nonlinear Chemical Process Monitoring And Fault Detection Based On Modified Lstm Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saufi, Muhammad Amirul Asraf Mohd (2022) Performance Enhancement Of PesZif-L Mixed Matrix Membrane Using Ionic Liquid For Co2N2 Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mamat, Muhammad Hakimi Firdaus (2022) Adsorption Of Copper (Ii) Ions In Wastewater Using Mangrove-Based Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suri, Muhammad Farhan Hakim (2022) Adsorptive Desulphurization Of Dibenzothiophene By Using Bentonite-Based Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azlan, Nur Qistina Azfa Mohd (2022) Batch Adsorption Of Bisphenol A (Bpa) On Coconut Shell Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Muhammad, Nurul Nadia (2022) Colorimetric Detection of Heavy Metal Ions Using Green Synthesized Silver Nanoparticles from Kaempferia Galanga Rhizomes Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rashid, Nur Alya (2022) Conversion Of Waste Cooking Oil Into Biofuels Using Trimetallic Catalyst. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Adnan, Nur Sajha (2022) Impact Of Cross-Linking Polymer To Bridge The Porous Membrane And Selective Layer In Membrane Absorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ramasamy, Ram Ghautaam P. (2022) Synthesis Of Ordered Mesoporous Sno2 Using Sba-15 Nanocasting Template And Its Performance As A Gas Sensor For Hydrogen Sulfide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Subramaniam, Reasmyraj R (2022) Poly(4-Methyl-1-Pentene) Mixed-Matrix Membrane Fabrication With Silica Nanoparticle Filler For Co2 N2 Gas Separation Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Paul, Timothy Stephen Raj (2022) Activated Carbon From Mangrove By Microwave Irradiation For Adsorption Of Lead(Ii) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nadesan, Suvithra (2022) Removal Of Oxytetracycline From Water Using Ozonation Alone And Combination Of Catalytic Ozonation With Zinc Oxide Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nurdin, Zainur Fazira (2022) The Effect Of Valencene Biotransformation At Different Growth Phase Of Yarrowia Lipolytica. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Amin, Fatimah Nur Mohammad (2022) An Evaluation Of Factors Affecting The Choice Of The Different Roofing Materials In Residential Within Kedah State Of Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Suhailmi, Mardhiah Muhammad (2022) Analysis Of Wind Pressure Effect On Gambrel Roof Of A Low-Rise Building Using Computational Fluid Dynamic (Cfd). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Farina Aisyah (2022) Ranking Of Preferred Criteria Of Floor Finishes For Bathroom By The House Owner In East Coast Of The Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hipeny, Alya Batrisyia (2022) Procedural Effects On Controlling Natural Disasters (Landslides And Flash Floods) Based On Environmental Degradation From Development In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tahar, Noor Emylia Abdul (2022) Leachate Treatment Removal Of Organic Matter Using Ultrasonic-Assisted Electrocoagulation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aminuddin, Yasmin (2022) Biosorption Of Colour In Landfill Leachate Using Raw Hydrilla Sp. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Siti Nur Shafiqah Rosslan (2022) Biosorption Of Colour In Landfill Leachate By Using Base Pre-Treatment Hydrilla SP. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Pauzi, Nurshelawati Mohd (2022) Adoption Of Industrialised Building System (Ibs) In Building Projects Based On Disaster Risk Management Cycle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saleh, Nursyahirah Mohd (2022) Rock Mass Characterisation Of Tunnel Face Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rahman, Atirah Syafikah Abd (2022) Knowledge of lung expansion implementing incentive spirometry among nursing students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Paul, Christie Lily Aida Pius (2022) Knowledge, attitudes, and practices toward coronavirus disease 2019 among intensive care unit nurses in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Norazman, Fatin Umairah (2022) The needs and satisfaction among family members during COVID-19 pandemic in intensive care unit (ICU) Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Sani, Fatinnur Badrina Ahmad (2022) Self-reported empathy among nursing students of school of health sciences, Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Setia, Marlysa Mohd (2022) Assessment of social media usage for nursing education among nursing students in school of health sciences, Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mohamad, Normah (2022) Sleep quality and academic performance among nursing student in USM and UiTM. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Manan, Nurizzati (2022) Knowledge, attitudes, and practice of final year nursing students on risk factor of cardiovascular disease in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Khairi, Nurul Akmal Asnil (2022) Knowledge and practice regarding contact lens wear and care among undergraduate students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Saffie, Nurul Atikah Mohamad (2022) Sleep quality and the associated factors among undergraduate student at health campus, Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Asri, Nurul Izzah (2022) Barriers to breast self-examination practice among female undergraduate students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan. (Submitted)

Shafikah, Nurul (2022) Knowledge of burn first aid among caregivers in pediatric clinic of Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Masazlin, Nurul Syakinah (2022) The study of family planning practice during and post Covid-19 pandemic crisis among married couples in Johor, Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Sharif, Shara Syasya Athirah (2022) Knowledge and attitude towards dementia among nursing students at Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Amin, Siti Nur'Ain Suraya Mohd (2022) Knowledge, attitude and practice of over the counter analgesic among undergraduate students in health campus USM. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Wira, Wan Muhammad Najmi Taufiq Wan (2022) Anxiety and quality of life among nursing students undergoing clinical placement during COVID-19 pandemic. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mat Radzi, Muhammad Adib Nuqman (2022) Effect Of Different Calcium Salt Coating On Mechanical And Bioactivity Properties Of Cordierite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Nagalingam, Muvent (2022) Exploring The Application Of Radio Frequency Sensor At Signalized Intersections For Emergency Vehicles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Lyana Sabrina (2022) Hydrothermal Carbonization Of Coconut Husk As An Adsorbent For The Removal Of Chloramphenicol Compounds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zaabah, Intan Lyana (2022) Internet addiction and depression among university students at school of health sciences, Universiti Sains Malaysia during the COVID-19 pandemic. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mishardy, Nur Aisyah (2022) Knowledge & awareness regarding prevention of cardiovascular disease among medical and nursing students in Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Yuyud, Putri Norfitria Nurulaspy Asep (2022) Knowledge and awareness on depression of hospitalised elderly patients among nurses in HUSM. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Jaafar, Muhamad Aliff Ikmal (2021) Determination Of Vortex Formation At Temenggor Tnb Hydropower Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Angeline, Debbie Annabelle (2021) A Study On Practices Of Solid Waste Disposal In Different Countries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Kamal Khairi Ahmad (2021) Improvement By Using Antifouling On Retaining Wall. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Shi Kin (2021) Exploring The Potential Of Saw Dust As Internal Curing Agent In Concrete Subjected To Different Curing Conditions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ooi, Jun Hao (2021) Determination Of Seismic Vulnerability Assessment By Using Rapid Screening Method Through Web-Based Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Phua, Hui Chi (2021) Trends And Gaps On New Emerging Pollutants (Neps) In Landfill Leachate Over The Past 10 Years (2010-2020). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adnan, Raja Asyraf Azizan Raja (2021) Rock Mass Surface Roughness Characterization Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmadi, Asma' (2021) Rock Mass Discontinuity Characterisation Using Image Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shee, Tian Hao (2021) Assessing Motorcyclists Risky Riding Behaviour At Three-Legged Stop-Controlled Junctions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teo, Ka Meng (2021) Soil Capillary Depression In Lnapl Contaminated Soil Due To Fluctuating Groundwater Table Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wong, Qi Min (2021) Vulnerability Assessment Of Telecommunication Steel Tower Subjected To Seismic Excitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zain, Wan Mohd Nainunis Wan Md (2021) Comparison Of Traffic Noise Level Assessment Between Industrial Areas, Residential Area And Construction Areas In Ipoh, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazri, Engku Afif Akramin Engku Muhammad (2021) Post-Fire Mechanical Properties Of Natural And Synthetic Fibre Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Yoganathan, Kartiyani (2021) Performance Of Zwitterionic Adsorbent Coating For Real Industrial Effluents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan Lekha @ Malek, Hajar (2021) Adsorption Of Lead (II) From Aqueous Solution By Activated Carbon Developed From Mangrove Wood By Microwave Radiation Heating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Gunasegran, Vikneshan (2021) Simultaneous Removal Of Ammonium And Phosphate Using Magnesium Chloride Modified Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Choo, Kinn (2021) Performance Comparison Of Intelligent Tuning Methods Using Pid-Afcga And Pid-Afcpso In Attenuating The Vibration Of The Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Ann Yen (2021) Tribological Properties Of Palm Oil-Based Grease With Nano Particle Additive. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

John, Lorraine Pidang (2021) Structural Analysis Of Drone Propeller Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mafazi, Muhammad Asri Asyraaf (2021) Performance Characterictics Of Single Stage Micro Gas Turbine (Mgt) Running On Liquid Biofuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamaruzaman, Muhammad Faris Shauqi (2021) Hole Quality Assessment Of Drilled Carbon Fiber Reinforced Polymer (Cfrp) Panel Using Various Drill Bit Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ishak, Muhammad Hanafi (2021) Analysis Of Pseudoelastic Deformation Cycles Of Gradiently Aged Niti Shape Memory Alloys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nazarudin, Muhammad Zaim Hanif (2021) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mazlan, Muhammd Izzat Syafiq (2021) Development And Characterization Of Producer Gas Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sathiaseelan, Nagentheran (2021) Investigation Of Roadside Wind Energy The Harvesting Mechanism. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Abdullah, Fatin Huwaina (2021) An Experimental Investigation On The Performance Of The Modified Connection Of Overhang Roof Steel Cladding Subjected To Static Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Andrew, Lee Kwan Yee (2021) Application Of Hec-Ras Hydrodynamic Flood Modelling For River A Study Case Of Bertam Valley, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Ying Wei (2021) Evaluation Of Variation In Material Cost For Design Of Reinforced Concrete Buildings In Penang Island Considering Seismic Effect. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Radzi, Fatin Nadia Mohamad (2021) Impact Of Covid-19 On Construction Industry From Contractor’s Perspective. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alias, Ahmad Danish Ab (2021) Microstructural Characteristic Of Lateritic And Marine Clay Soil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamaludin, Kamal Safwan (2021) Analysis Of Walking Velocity Of Pedestrian Walking Through Angled-Corridor Based On Spatial Trajectories – A Bidirectional Scenario. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rohaizad, Khairun Neesa (2021) Treatment Of Leachate Landfill By Adsorption Using Charcoal Waste From Acetylene Gas Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khor, Hao Zhe (2021) Numerical Modelling Of Air Bubbles In Artificial Riffle Zone Using Flow-3d. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khor, Yong Yee (2021) A Computational Study On Structural Behaviour Of Surfaces With Curved Fold Lines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Li, Bai Hao (2021) A Study On The Flow Characteristic In The Artificial Riffle Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salim, Muhamad Shazarul (2021) A Systematic Review Experimental And Numerical Studies On The Mechanical Properties Of Cfs Section At Elevated Temperature And After Cooling Down. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kabir, Nur Asyikin (2021) Analysis Of Motorcyclists’ Risky Behavior While Performing Safety Training With Safety Riding Training (Srt) Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kabir, Nur Asyikin (2021) Analysis Of Motorcyclists’ Risky Behavior While Performing Safety Training With Safety Riding Training (Srt) Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rabie, Mohamed Samir Mohamed Kamel (2021) Application Of Fa-Ggbs Geopolymer As An Alternative Adsorbent For Heavy Metals Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alias, Noorul Atikah (2021) Artificial Batik Wastewater Treatment Using The Integration Method Of Electrocoagulation And Ultrasonic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zaki, Mahani Mohamad (2021) Assessment Of Heavy Metal Pollution Within Downstream Of Perak River Basin Using Gis Mapping. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Roslan, Nur Aina Mohd (2021) Assessment Of Heavy Metal Pollution Within Downstream Of Perak River Basin Using Qual2k Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bakar, Mohd Faiz Abu (2021) Assessment Of Traffic Noise Level And Traffic Composition In Kulim, Kedah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fadzil, Muhammad Luqman Mohd (2021) Bio-Delignification Pre-Treatment Of Lignocellulosic Biomass, Oil Palm Frond (Opf) And Empty Fruit Bunch (Efb) A Review In Biofuels And Biogas Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rodzey, Muhamad Zulfatah Izham Muhamad (2021) Coatability And Bonding Characteristics Of Asphalt Binders Modified With Alkylamines-Based And Polyalkylene Glycol-Based Bonding Promoters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Yi Ping, Eveline (2021) Cost Considerations For Reinforced Concrete Office Building In Malaysia Incorporating Seismic Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lekha, S. Balakrishnan (2021) Covid-19 Influences On The Productivity Of Construction Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Low, Yan May (2021) Effect Of Surface Geometry And Pretension Level On Vibration Of Tensioned Membrane Structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamal, Nurdinie Ienani Md. (2021) A Study Of Flow Characteristics On Hydraulic Physical Model Of Tawau Dam Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sukri, Nurin Syazwina (2021) Ground Improvement By Using Geosynthetics In Slope W. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sabri, Nurul Arisya Shuhada (2021) Heavy Metal Removal From Semiconductor Industry Wastewater A Review On Ion Exchange Process Using Resin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Syahrunnizar, Nur Afiqah (2021) Hydraulic Efficiency Of Gully Inlets, Curbs And Combination Inlets A Systematic Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Yip Yong (2021) Light Non-Aqueous Phase Liquid (Lnapl) Vertical And Lateral Migration Behaviour Due To Fluctuating Groundwater Table. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Yin Tung (2021) Modelling Sustainable Urban Stormwater System In Diamond City Using Swmm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faudzi, Liyana Mohd (2021) Nutrient Removal Of Tropical Bioretention System In Treating Polluted Runoff A Pilot Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khazali, Aliff Izuddin (2021) Oxygen Uptake Rate As An In-Situ Indicator For Shock Loading Event At Sewage Treatment Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Fatin Norliana (2021) Plant Study Of Portulaca Grandiflora In Green Roof Application For Rainwater Harvesting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saad, Nur Afiqah Ahmad (2021) Pollutant Removal Performances Of Tropical Wetland Plants In Treating Domestic Wastewater Using Mesocosm Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saleh, Afza (2021) Public Opinion Toward Green Infrastructure On Buildings For Sustainable In Parit Buntar And Sungai Jawi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamim, Nur Syafiqah (2021) Rainfall - Runoff Modelling For The Batu Kurau River Basin Using Hec-Hms Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Nur Asyraf (2021) Removal Escherichia Coli From Sewage Using Combination Of Electrocoagulation And Ultrasonic Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zuki, Nurfatin Mohd (2021) Shading Effects On The Physical Parameter Related To Thermal Comfort In A Hostel Room And Residential House. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azli, Shahrul Amin Saifol (2021) Critical Factors For The Effective Safety Management System Of Construction Project Sites In Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bahtar@Mokthar, Siti Musliha (2021) Influences Of Green Building Technology(Gbt) Adoption On Community Resilience In The Context Of Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Malek, Siti Norshafiqah Aini Abd (2021) Finite Element Analysis Of Bridge Girder Retrofitted By A Post-Tensioned Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Malek, Siti Norshafiqah Aini Abd (2021) Finite Element Analysis Of Bridge Girder Retrofitted By A Post-Tensioned Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tarmizi, Siti Suhaila Mohd (2021) Integrated Electrocoagulation-Ultrasonic Method For Organic Matter Removal From Landfill Leachate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sankar, Siveraj (2021) Coconut Fibre As Stormwater Filters In Sustainable Urban Drainage Systems: A Systematic Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azman, Intan Halawati Syamimi Nor (2021) Soil Characteristics Using Borelogs Database For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhar, Aqilah (2021) Spatial And Temporal Analysis Of Heavy Metals Distribution In Sungai Perai. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Johari, Aida Syazwani (2021) Study Of Effluent Water Quality Index From Pig Farming Area In Kampung Selamat, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Devarajan, Devandran (2021) Study On Mechanical Properties Of Node And Internode From Different Parts Of Gigantochloa Ligulata Bamboo. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tee, Deng Wang (2021) Analysis Of The Rectangular And Circular Cylindrical Rc Elevated Water Tank Design According To Eurocode. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Wen Si (2021) The Evolving Trend Of Zeolite Applications In Water, Wastewater, And Leachate Treatment In Past 40 Years (1980-2020). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Johnny, Wong Hing Kiong (2021) The Key Critical Factors Towards Time Delay During The Construction Of Building And Infrastructure Projects In Sarawak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Toh, Wei Jian (2021) Cost Comparison For Non-Seismic And Seismic Design Of A Rectangular Building Structure Located On Different Soil Types Based On Malaysian Annex. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tracy, Wong Leh Xin (2021) Characterization Of Hydrophobic-Treated Recycled Paper Mill Sludge In Bituminous Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Halili, Ummi Zulaikha Ahmad (2021) Compliance Of Thermal Comfort Parameters Within Students’ Dormitory, Residental And Pusat Islam Engineering Campus, Usm Based On Industry Code Of Practice On Indoor Air Quality (Icop) 2010. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Razali, Wan Ahmad Asyraf Wan Mohd (2021) Changes In Pm2.5 Levels After Covid-19 Outbreak In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yuzaile, Yushafika Roshaini (2021) Gis-Based Soil Erosion And Sediment Transport Modelling Of Perak River Basin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wong, Jia Hui (2021) Seismic Performance Of A Double-Storey Prefabricated Cold-Formed Steel Structure As Post-Disaster Temporary Housing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wong, Qi Min (2021) Bioretention Modelling Using Music Software For Urban Runoff Treatment Under Tropical Climate A Case Study In Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Shafullah, Farah Nabila (2021) The Effects Of Tannic Acid On Physicochemical, Barrier, And Mechanical Properties Of Bovine Gelatin Films. Project Report. Universiti Sains Malaysia. (Submitted)

Khor, Ru Mei (2021) Physicochemical, Antioxidant And Antibacterial Properties Of Betel Leaf And Kaffir Lime Essential Oil Nanoemulsions. Project Report. Universiti Sains Malaysia. (Submitted)

Liaw, Shi Yan (2021) Microbial Contamination Of Eggshell And Eggs Content Sold In Retail And Fresh Market In Penang. Project Report. Universiti Sains Malaysia. (Submitted)

Loong, Ye Heng (2021) Development And Characterization Of Polylactic Acid/ Porous Corn Starch – Inclusion Complex Blend Film Containing Thymol. Project Report. Universiti Sains Malaysia. (Submitted)

Hasbullah, Nur Ili (2021) The Physicochemical Properties And Effect Of Storage Period On Powder Properties Of Instant ‘Masak Lodeh’. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Hasan, Norfazila Amir (2021) Quality of postoperative pain management among orthopedic patients in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Huzaifah, Syamil Ahmad (2021) An Investigation On The Synthesis And Characterization Of Flexible 3d Graphene Foam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mydin, Syazana Husna Othuman (2021) Mechanical Properties Of Natural Fibre Reinforced Composite By Using Vacuum Assisted Double Bagging Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tan, Shu Chuan (2021) Banana Seedlings Health Monitoring For Micro Air Vehicles Using Deep Convolutional Neural Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chan, Kit Yen (2021) Simulations For Steam Methane Reforming Over Ni/Al2O3 Catalyst In A Fixed Bed Reactor And A Membrane Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Hamdan, Eleena Yasmeen (2021) Development Of Water Quality Index Prediction Model For Penang Rivers Using Artificial Neural Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lew, Jun Kit (2021) Enhancement Of Microalgae Adhesion To Substrate Via Algal Organic Matter Pre-Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ahmed Nassor, Akbar (2021) Modelling And Simulation Of Bio-Oil Production From Palm Oil Biomass Via Fast Pyrolysis Using Aspen Plus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ragupathy, Sukdarsanan (2021) Effect Of Temperature Towards Membrane Fouling By Microalgae Algal Organic Matter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zahrimi, Mohamad Mifzal Nur Hakim (2021) Application Of Response Surface Methodology (RSM) For The Optimization Parameters Of Hydrochar Production From Coconut Husk Using Hydrothermal Carbonization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Kah Kheng (2021) Supersonic Turbulent Flow Modelling Over Steps And Cavities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lim, Ban Aik (2021) Analysis On The Influence Of Different Fuel Combustion Hot Gases On The Combustor Casing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lim, Wei Fong (2021) Supersonic Turbulent Flow Modelling Over Large Amplitude-To-Wavelength Periodic Wavy Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ibrahim, Muhammad Fauzan (2021) Encapsulation Of Multiple Chips Led Module Using Computational Fluid Dynamic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Idrus, Muhamad Affiq Iruan (2021) Cfd Simulation Of Micro Hydro-Kinetic Turbine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Nor, Muhammad Haziq Mohamed (2021) Black-Box Modelling For Brushless Dc Motor And Control Strategy For Quadcopter Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Shobani, Muhamad Hafizuddin Ahmad (2021) Evaluation Of Filtering Facepiece Respirators Using Chemical No-Chemical Decontamination Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Muhamad, Muhamad Zulhilmi (2021) Aerial Based Traffic Monitoring And Vehicle Count Detection Using Background Subtraction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Muzafar, Muhammad Izz Zharfan Azhar (2021) Lora-Based Internet Of Things (Iot) Wireless Network System To Monitor Covid-19 Patients. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Poopathi, Veshmen (2021) Forecasting The Adsorption Capacity Of Organic Dye By Using Zirconium-Based Metal-Organic Framework (MOF) Comparison Studies Between Response Surface And Neural Network Models. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ramli, Nurin Nafisa (2021) Design Of Real Time Analysis Simulation For Two Interacting Tank Model System Using Python Programming Language. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sinnaiah, Roshini (2021) Synthesis Of Modified Coffee Ground Adsorbents To Remove Malachite Green Dyes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Thinagar, Saranya (2021) Comparison Between Box-Behnken Design And Central Composite Design For Optimizing The Biosynthesis Of Silver Particles Using Curcuma Longa Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Othman, Siti Aishah (2021) Microwave Irradiated Durian Seed Based Activated Carbon For Chloramphenicol Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bashkeran, Thaaranni (2021) Palm Oil Mill Boiler Feed Water (BFW) Quality Data Analysis Following ASME Specifications For The State Of Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hiew, Yen Kei (2021) Effect Of Membrane Selectivity And Configuration On Purity And Recovery Of Methane From Selected Landfill Bio-Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

John, Jonathon (2021) Application Of Response Surface Methodology (RSM) For Optimization Paramter Of LSCF-CuO For Intermediate Temperature Solid Oxide Fuel Cells. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hamid, Norfarhanah (2021) Model Prediction Of Pm2.5 And Pm10 Using Machine Learning Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Soon, Wan Chi (2021) Manipulating Membrane Anti-Wetting Tendency Through Phase Inversion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Hanapi, Muhamad Syafik (2021) Synthesis, Characterization And Fouling Evaluation On Superhydrophobic Coating Modified Using Carbon Soot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Gan Wei Chee, Wei Chee (2021) Synthesis Of Porous Cellulose Beads Intercalated With Calcium Carbonate Nanoparticles From Sodium Hydroxide/Urea Solution For Dye Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Gay, Benjamin (2021) Scum Sludge From Palm Oil Mill Effluent Treatment Plant As Biodiesel Feedstock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohammad Nasruddin, Muhammad Alif Aiman (2021) Adsorption Of Chloramphenicol By Ordered Mesoporous Carbons Using Aspen Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Na, Yong Sik (2021) Response Surface Methodology (RSM) For Process Parameters Optimization Of LiFePO4 Using Flame Spray Reactor For Li-ION Batteries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zainol, Nurhidayah (2021) Aspen Simulation Of Methylene Blue Adsorption Using Coconut Shell Based Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Jayaprakas, Sharvin (2021) Removal Of Tetracycline Hydrochloride Antibiotic From Water Using An Ozonation Alone And Combination Of Ozonation And Sonolysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Kai Qi (2021) Preparation And Characterization Of Citric Acid Cross-Linked Carboxymethylcellulose Hydrogel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Murugan, Thaatchayini (2021) Kinetic Modelling Of Lipase-Catalysed Flavour Esters Synthesis Focusing On Factor Affecting The Reaction Curves. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Wan Mazlan, Wan Hamizan (2021) Modelling And Simulation Of Cationic Dye Adsorption Using Modified Metal-Organic Framework-5 (MOF-5). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Muhamad, Muhamad Zulhilmi (2021) Aerial Based Traffic Monitoring And Vehicle Count Detection Using Background Subtraction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sahshidi, Abdul Malik Mohd (2021) Review On The Implementation Of Fourth Industrial Revolution (Ir4.0) In Malaysian Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Harith, Ahmad Asri Abd (2021) Hybridization Of Natural Fibre Polymer Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zubir, Ahmad Ikhwan Mohd (2021) Full-Wave Analysis Of Air-Filled Substrate Integrated Waveguide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ang, Jia Jun (2021) Effect Of Fringe Parameter On Phase Measuring Deflectometry Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Vasuthaven, Arvind Ganeesh (2021) Study Of Wire Arc Additive Manufacturing And Potential In Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chong, Shin Yun (2021) Implications Of Intravascular Catheter In A Blood Vessel During Medical Treatment Using Computational Fluid Dynamics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Choo, Then Xiang (2021) Optimization Of Customized Tetra-Flute Drill Reamer For A Better Hole Quality In Single Shot Drilling Of Cfrp Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kumar, Denesh Kumar Siva (2021) Regenerative Braking System For Through-The Road Parallel Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Edmund, Ung Eng Soon (2021) Design And Development Of Engine Control System For Advanced Diesel Engine Research. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fauzi, Farah Aina (2021) Numerical Analysis Of The Combustion Characteristic Of Compression-Ignition Engine For The Application Of Biodiesel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Goh, Wei Shing (2021) Influence Of Epoxy Viscosity And Gold Wire Size On Led Encapsulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Narendaran, Harisangar (2021) Biomechanics Analysis During Cutting Oil Palm Fronds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hing, Chen Teng (2021) Effect Of Vegetable Oil On Surface Roughness During Turning Of Aisi 1020 Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Iskandar Mirza Mohd (2021) Effect Of Similar And Dissimilar Aluminum Alloy Tailor Welded Blank To Twist Springback. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Muniary, Kaalidass (2021) Experimental Investigation On The Effect Of Epoxy On The Encapsulation Process In Light Emitting Diode Manufacturing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ishak, Khairul Aiman (2021) Assessment Of Force Required During Cutting Oil Palm Fronds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khor, Khye Jim (2021) Automatic Grading System Of Incoming Raw Unclean Edible Bird Nest Using Deep Learning Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kanyan, Laura Jasmine Thomas (2021) Data Mining Approach To Classify Covid-19 Severity By Clinical Symptoms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Wing Siong (2021) A Comparison Of Design Approach Using Topology Optimization Design And Parametric Design Of Suspended Handle With Multi Constraints Optimization For Vibration Attenuation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Liew, Yu Liang (2021) Biomechanical Markerless Motion Classification Based On Stick Model Development For Shop Floor Operator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Kean Siang (2021) Implementation of Multigrid Method for Solving Coupled Problem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Mei Hui (2021) Sound Absorption Of Micro-Perforated Panel Made By Oil Palm Fibre. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shukri, Mohamad Akmal Mohd (2021) A Study Of The Circulation Of Covid-19 Viruses Flow In A Particular Space. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohamad Azren (2021) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shukry, Mohamad Danial Mohd (2021) 3d Scanner App For New Product Development Due To Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kadir, Mohammad ‘Asri (2021) Combustion Characteristics Of Blends Of Kerosene And Cooking Oil At Various Fuel-Air Equivalence Ratio Simulation Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Najib, Mohammad Amirul Akmal Mohd (2021) Development Of A System For Measuring Pedal Force In Arm Leg Pedal Exercise. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hayzir, Mohammad Ikhmal Fitri Mohd (2021) Development And Analysis Of Rotordynamics System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zulbakri, Mohammad Luqman (2021) Experimental Study Of The Effects Of Egg Yolk Oil (Eyo) On Emulsified Biofuel Properties And Compression Ignition (Ci) Engine Performance Improvement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sahabarudin, Mohammad Nor Fikri (2021) Investigation Of Gold Wire Attachment During Led Encapsulation Process Using Computational Fluid Dynamic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Mohd Luqman Hakim Md (2021) Study On Vibration Level Of Agriculture Machinery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azman, Muhammad Aliff Zikri (2021) Study Of Crack Propagation On Component (Multilayer Ceramic Capacitor) During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zaki, Muhammad Al Fateh Mohammad (2021) Development Of Power Assist Control System Of Hydraulic Hybrid Vehicle (Hhv). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamarulzaman, Muhammad Amir (2021) Acoustic Performance Study Of 3d Printed Micro-Perforated Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahbuddin, Muhammad Fawwaz (2021) Investigation Of Sea Wave Point Absorber (The Energy Conversion System). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khairuzi, Muhammad Haris (2021) An Optimization Of Carbonized Empty Fruit Bunch Briquettes And Biomass Producer Gas Quality Characteristics Using Response Surface Method (Rsm). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Salim, Muhammad Razin (2021) Developing Operation And Analytics Model To Predict And Optimize Selective Manufacturing In Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zulkifle, Muhammad Syamim (2021) Correlation Between Pull-Out Strength And Insertion Strain Field In Relation To Bone Screw Insertion Angle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khalid, Muhammad Syazwan Abdul (2021) Pneumatic As A Future Or Alternative Energy Storage System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adzman, Muhammad Syazwan Kamarul (2021) Comparison Of Carbon Footprints Between Internal Combustion Engine, Hybrid And Electric Vehicles Selected Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahruddin, Nabil Syamim (2021) Design And Fabrication Of Shape Memory Alloy Heat Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Abdullah, Nadiah Aqilahwati (2021) Work-Related Musculoskeletal Risks And Electromyographic Analysis Of The Upper Body Muscles During Oil Palm Pruning Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Han We (2021) Finite Element Analysis Of Polydimethylsiloxane (Pdms) Strain Sensor For The Spinal Fusion Monitoring. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Woon Li (2021) Identification Of Flow Blockage Levels In Centrifugal Pump By Machine Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Yie Yen (2021) Non-Linear Contact Finite Element Analysis Of Split Hopkinson Incident Bars Under Impact Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kasim, Nor Asikin (2021) The Effect Of Impingement Hot Air On Temperature Distribution Of The Flat Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hashimi, Nur Hatin Raihana (2021) Wear Analysis On Different Customized Twist Drill Bit Designs In Drilling Cfrp Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

M.Ghazali, Nor Maisarah (2021) Assessments Of Awkward Postures Associated With Biomechanical Forces And Muscle Activations During Collecting Oil Palm Fresh Fruit Bunches. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ahmad, Nur Hidayah (2021) Printed Thin Film On Copper And Pcb For Corrosion Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Suhatri, Nur Syakila (2021) Witness Simulation Of Flight Arrival And Departure For One Runaway Airport Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yaacob, Nuradlin Athirah (2021) Effect Of Volume Fraction For Different Thermophysical Properties Of Carbon Nanotube Nanofluid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rozani, Nurul Rifhani (2021) Simulation Model Of An Air Freshener Flows In A Room By An Automatic Spray. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ong, Yong Shien (2021) Design And Fabrication Of Ankle Foot Orthosis Utilising 3d Scanner And 3d Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zainol, Raja Ahmad Shurim Raja (2021) Investigation Of Sea Wave Point Absorber, The Dual-Direction Mechanism. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Siew, Teng Yi (2021) Cooling Of Photovoltaic Panel Using Water-Cooled System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahrin, Siti Asiah Ismam (2021) A Study Of Anisotropic Dependent Toughening Mechanisms Of Cortical Bone Under Monotonic Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rajoo, Tanish (2021) Distracted Driving Classification Based On Driving Skills In Females. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Teoh, Chin Xuan (2021) Blockchain Readiness Assessment For Malaysian Organizations And Challenges To Adopt Blockchain Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Jer Jian (2021) Heat Dissipation Enhancement Using Graphene Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Kok Yung (2021) Impingement Flow Study on Temperature Profile of Concave Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Jun Heng (2021) Experimental And Finite Element Analysis Of Contact Behavior In Lubricated Rolling Contact. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Kah Weng (2021) Development Of Ultrasonic Cautery System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yew, Jia Jing (2021) Application Of Micro Perforated Panel On The Safety Earmuff. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Cheah, Yue Yeou (2021) A Systematic Review Experimental And Numerical Studies Of Fire Influence On Lateral Resistance And Buckling Performance Of Cold Formed Steel Sections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Manan, Faten Nur Diyana Abdul (2021) A Systematic Review Of Green Roof Technology Using Coco Peat As A Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarudin, Ahmad Afif (2021) Assessment Of Sedimentation Process At Kenyir Dam River Using Hydraulic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Hor Kuan (2021) Determining The Effects Of Risky Riding Behavior On Gap Acceptance Of Right-Turning Motorcyclists From Minor Roads At T-Junctions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Yi Zhe (2021) Evaluation Of Crack On Arch Structures Using The Digital Image. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chong, Jia Wei (2021) Calibration And Validation Of Vissim Simulation A Case Study Of Priority Bus Lane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ching, Meng Xuan (2021) Influence Of Treated Recycled Aggregates As Partial Aggregate Replacement On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fuad, Khairul Ikhwan Mohd (2021) Evaluation On The Properties Of Aggregate Subjected To Elevated Temperature Using Ncat Ignition Oven And Asphalt Mix Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khor, Cheng Yi (2021) Influence Of Oil Palm Fiber And Steel Fiber Inclusion On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Low, Phak Ho (2021) A Systematic Literature Review On Magnesium Oxide As Expansive Agent In Self Healing Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ko, Jiunn Xuan (2021) Analysis Of The Staggered Crossbeam Of Pier Designed Based On Deep Beam Design Concept. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saleh, Nor Liyana (2021) Application Of Azadirachta Indica Leaves As Natural Coagulant For Kitchen Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gusman, Muhammad Hashim Habibie Arif (2021) Biochar Amendment On Palm Oil Biomass Effect On Physicochemical Properties And Fibre Degradation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mok, Tai Han (2021) Characterizations Of Bio-Asphalt Using Palm Bio-Oil From Empty Fruit Bunches And Beta Carotene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lam, Wen Siang (2021) Cultivation And Sporulation Of Bacillus Species In Self Healing Concrete A Systematic Literature Review_Lam Wen Siang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Zhi Zun (2021) Engineering Properties Of Asphalt Mixture Modified With Cup Lump Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamil, Nurainin Hafizah (2021) Laboratory Assessments For Conventional And Fiber Reinforced Asphalt Mixtures To Enhance Pavement Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ramli, Muhammad Azlan (2021) Limestone As Green Roof Media For Harvested Rainwater Improvement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Areeg Yasser (2021) Study On The Mechanical Properties Of Two Species Of Bamboo (Gigantochloa Ligulata And Gigantochloa Scortechinii) A Systematic Literature Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fazir, Syafiqah Mohd (2021) Improvement Of Efb Lignocellulosic Degradation, Organic Matter And Compost Quality With Natural Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Manogaran, Thiennieesh (2021) A Study Of Flow Characteristics Along The Hydraulic Physical Model Of Kenyir Dam Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiew, Keyue (2021) Compressibility Behaviour Of Nibong Tebal Clay Treated With Cement-Caltite Stabilizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhan, Wan Nur Arisya Najwa Wan Zainal (2021) Biological Degradation Of Empty Fruit Bunch With Biosurfactants And Palm Oil Mill Effluent Sludge By Composting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yunan, Afiqah Khairunnisa (2021) A survey on sports activity involvement, menstrual history and eating disorders in Malaysian female athletes. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Abdillah, Ahmad Ariff Zaki (2021) Comparison of bone health status and physical fitness component between inactive non-bowlers and recreational bowlers. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Yasrani, Ahmad Yasri Ahmad (2021) Effects of covid-19 pandemic on physical activity and sedentary behaviour among Malaysia undergraduate university students. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Chyi, Chua Chia (2021) The effects of internal and external imagery, and badminton skills execution on muse measure among novice university badminton players. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Dhirveenraj A/L Raj, Dhirveenraj A/L Raj (2021) Assessing the state anxiety, heart rate responses, and performance during e-bowling game in male and female individuals. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Yu, Chang Zhuang (2021) Associations of self-reported physical activity levels and lifestyle risk factors with irritable bowel syndrome severity scores. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Lin, Liow Kai (2021) Effects of supervised and unsupervised skipping rope training on perceptual responses among recreational badminton players. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Rajamohan, Manjjhari (2021) Effects of caffeine consumption on sports performance (scoping review). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Shamsuri, Mohd Hafiz (2021) The relationship between isokinetic knee strength and knee biomechanics during single leg landing among recreational athletes. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Zahir, Muhammad Amzar Anas Mohd (2021) Effects of fatigue on the lower limb biomechanics during single leg landing among male recreational athletes. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Jariah, Muhammad Luqman (2021) Effects of nutritional ergogenic aids on physiological responses and skilled performance among football players: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia..

A/L Magesvaran, Navin Kumar (2021) Game analysis of Liverpool football club in English premier league season 2019/2020. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Razak, Norhanis Farina Abdul (2021) Physical activity level and the risk of subjective health complaints in female university students. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Hanan, Nur Andriana Sufea (2021) Association of muscle health and quality of life in older adults living in rural community. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Wahab, Siti Nursyaima Abd (2021) A survey on the physical activity involvement among Universiti Sains Malaysia Health Campus students. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Ibrahim, Siti Salwa Suhaida Mohamad (2021) Anthropometric profile, balance ability, reaction time and bone health status among horseback riding athletes in Kelantan. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Nasrudin, Nurshatila (2021) Enhancement Of Oat Milk Suspension Stability Via Enzyme Hydrolysis Manipulation. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Azhar, Thaqif Naqiuddin Ahmad (2021) Development Of Solid Propellant Rocket Motor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Fen, Lim Suk (2021) Knowledge and perception of venous thromboembolism among antenatal women in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Din, Muhammad Arrasyid (2021) Nursing students’ knowledge and perception regarding self-neglect in elderly at School of Health Sciences, Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Ibrahim, Norulhuda (2021) Risk factor of pressure ulcer among surgical patient at Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Fadzli, Nur Fatin Aqilah Mohd (2021) Socio-economic status and financial burden among hemodialysis patients in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Malek, Nurainni Abdul (2021) Medication adherence among chronic kidney disease patients in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Lingam, Darwineswaran Raja (2021) Running-Related Injury Classification For Professional Runners. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Razak, Mohamad Ifhami Ab (2021) The Main Factors Affecting Choice Of Vehicles Amongst New Generations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mazlan, Nurul Farhana (2021) Caregiver knowledge on chronic obstructive pulmonary disease (COPD) among COPD patient in outpatient clinic, Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Fong, Ong Ming (2021) Prevalence of gestational diabetes mellitus and selected risk factors among pregnant women in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.. (Submitted)

Aminudden, Syaidatull Asmara (2021) Knowledge on hand hygiene compliance among health care workers at surgical wards in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Li, Teh Hui (2021) Nurses beliefs on benefits and barriers to physical activity promotion for cancer patients in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Siang, Ling Kui (2021) Work-related stress and turnover intention during the COVID-19 pandemic among nurses in Hospital Universiti Sains. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Rajesveran, Dinesvaran (2021) Modification Of PVDF Membrane Using Lignin And Calcium Carbonate For Oily Water Separation To Be Used In Water Dispenser. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Deva, Nathan (2021) Green Synthesis Of Silver Nanoparticles Using Curcuma Xanthorrhiza Rhizome Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Leong, Yong Sheng (2021) Simulation Of Series And Parallel Hydraulic Hybrid Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mohamad, Ahmad Aqil Asyraaf (2021) Comparison Of Different RSM Designs To Predict And Optimize The Acid Violet (AV 7) Adsorption Using RHA-CFA Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajendran, Ajayan (2021) Conceptual Study Of Enzymatic Synthesis Of Propyl Caffeate In Packed Bed Reactor At Steady-State And Isothermal Conditions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohammed Nasser, Al-Subaie (2021) Air Pollution Index Estimation Model Based On Artificial Neural Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bong, Sock Ving (2021) Adsorption Of Copper (II) Ions In Wastewater Using Mangrove-Based Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chuah, Jing Xuan (2021) Biodiesel Production Using Reactive Distillation: Optimization And Comparative Simulation Study Using Aspen. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suresh Raj, Aaron Basil Raj (2021) Aerodynamics And Performance Of Variable Pitch Vertical Axis Turbines At Low Tip Speed Ratios. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Goh, Su Teng (2021) Analysis And Comparison Of Airfoil-Polar Prediction Methods For Vertical-Axis Turbines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zamzuri, Amira Nur’izzah (2021) Analysis Of Ionospheric Effects On Ground-Based Augmentation System (Gbas) At Klia, Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ching, Poh Ling (2021) Autonomous Navigation Of Micro Air Vehicle Using Ultra-Wideband Indoor Positioning In Precision Agriculture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Nekmat, Hafriz Najmi (2021) Evaluation Of Multi-Fuel Hybrid Engine Performance Using Gas Turbine Simulation Program. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Kaventra, Gunasegaran (2021) Dynamic Simulation Of Polymerization Reactor Python MMA Using. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Izudin @ Mohamad, Muhammad Firdaus (2021) Synthesis Of Methyl Acetate By Lipase Catalyzed Esterification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Shukri, Farah Anis (2021) Aquaculture Wastewater Treatment Using A Combination Of Ozonation Process And Activated Carbon Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Wahab, Abdul Aniq Aqil Abd (2021) Global Path Planning For Solar-Powered Uav. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Luqman, Farihah (2021) Adsorption Of Chloramphenicol By Activated Carbon Derived From Palm Kernel Shell Via Microwave Irradiation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chai, Rong Xing (2021) Internet Of Things On Web Development And Cloud Computing For Space Farming. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mohammad Gial, Mohamad Anwar (2021) Microwave – Assisted Extraction (MAE) Of Rhizome Kaempferia Parviflora Crude And Its Biological Activity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bujang, Christina (2021) Multi-Agent Reinforcement Learning For Swarm Robots Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Jasni, Mohd Khairul Akmal (2021) Evaluation Of Emulsion Liquid Membrane On Pharmaceutical Waste From Aquaculture Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zamree, Alif Imran (2021) Performance Comparison Between Pid And Lqr Controllers For Drone Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Jamaludin, Haikal (2021) Development And Analysis Of High Altitude Balloon Performance Calculator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Adnan, Fietriey Atiera Shahida (2021) Steady State Multiplicity In The Reactive Distillation Of Methyl Tert-Butyl Ether (MTBE) Synthesis: Stability Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Harikumar, Haripresath (2021) Parametric Study On Aerodynamic Performance Of Uav Winglet Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Azmi, Muhamad Syakir (2021) Influences Of Freely Suspended Polyelectrolyte On Aggregation Kinetics Of Magnetic Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ibrahim, Ilmi (2021) Simulation Of Autothermal Reformer For Production Of Liquid Fuel From Natural Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suhaimi, Muhammad Alif (2021) Riboflavin Adsorption On Mesoporous Carbon By Using Aspen Adsorption Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kabbarah, Hussam Fatthi A (2021) Stress And Aeroelastic Analyses Of Ultralight Aircraft Wing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Idris, Mohamed Nizam Mohamed (2021) Evaluation Of The Mechanisms For Inducing Leading Edge Vortex Using Ansys Fluent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Unpublished)

Bohiran, Muhammad Fahim Azim (2021) Feasibility Of Screen Printing Carbon Electrode To Detect Ascorbic Acid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohamad Alias, Nurul Aina (2021) Non-Catalytic And Solvent-Free Esterification Of Acetic Acid With Ethanol Using Coiled Flow Inverter For Ethyl Ethanoate Synthesis In Food Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kawendar, Nhgantiran Nanthakumar (2021) Parametric Study Of Cavitation Effect On 3d Hydrokinetic Turbine Blades Using Cfd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Shanmugasundaram, Parrathen (2021) Simulation Of Reactive Distillation Column Of Methyl Tert- Butyl Ether Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bakar, Nurul Asyikin Abu (2021) Deep Reinforcement Learning For Control. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Saw, Wen Yi (2021) Almond Shell Based Activated Carbon Prepared Via Microwave Irradiated For Chloramphenicol Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bakar, Nurul Asyikin Abu (2021) Experimental Investigation On The Flow Structure Of A Hybrid Turbine Blade For Hydrokinetic Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Saironi, Muhammad Isa (2021) Stress And Strength Analyses Of Ultra-Light Aircraft Fuselage. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zulkifli, Noor Nazirulsyahmi (2021) Stability And Thermal Conductivity Of Graphene And Barium Titanate (Iv) Nanofluid With Different Volume Concentrations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Balakrishnan, Sakthisivan (2021) Mode 1 Fracture Toughness Of Palm And Coir Fibre Reinforced Composite Via Double Cantilever Beam Test. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mohamad, Nurul Hazirah (2021) Simulation Study Of Biodiesel Production Via Transesterification Process From Waste Cooking Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Muniandy, Sharviin Raaj P. (2021) Development Of A Mechanical Fish Prototype With Various Tail Platforms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zamri, Siti Nuruljannah Mohamad (2021) Experimental Investigation On The Power Performance Of A Hybrid Turbine Blade For Hydrokinetic Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Selvakone, Sivanandini (2021) Earth Magnetic Field Data Analysis For Earthquake Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chang, Chee Wing (2021) Observing The Parameter Dependant System On The Formation Of Lag Phase Curve In A Bacteria Growth. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Steven Ling, Guang Hu (2021) Synthesis Of PET/MWCNTs Electrospun Nanofiber With Polyester Fiber Support For Methylene Blue Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Yao Bin (2021) Fluid-Structure Interaction Analysis On Aircraft Wing Intergrated With Wing Tip Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Wan Anuar, Wan Ahmad Aizat (2021) Model Development For Turbine Energy Yield (TEY), Carbon Monoxide (CO) And Nitrogen Oxide (NOx) From Gas Turbine Power Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Vasudevan, Yuvneesh (2021) Investigation Of Cavity Designs On Various Airfoils. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mohd Radzi, Nurul Adila (2021) Esterification Of Ethanol And Acetic Acid Catalysed By Immobilized Candida Rugosa Lipase. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nor Hisyam, Nur Fatini (2021) Adsorption Isotherms And Kinetic Studies On The Removal Of Lead (II) Ions By Rubber Seed Coat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Mun Yi (2021) The Effect Of Carbon Dots On Conductive Ink As A Vitamin C Electrochemical Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sim, Wan Ting (2021) Synthesis Of Butyl Acetate By Lipase-Catalysed Esterification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Shah, Izlan (2021) Microwave Irradiated Rice Husk Based Activated Carbon For Adsorption Of Chloramphenicol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Jeffrey Lee, Jie Yi (2021) Modelling And Study Of Control Structures Of Reactive Distillation For The Production Of Methyl Tert-Butyl Ether (MTBE). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Kai Wen (2021) Dynamic Simulation Of Phenol Adsorption Using Microwave Induced Coconut Shell Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bachok @ Joffri, Luqman Hakim (2021) Gravitational Ultrafiltration Of River Water: Fouling And Cleaning Efficiency Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Salleh, Muhammad Sufian (2021) Magnetophoretic Migration Of Magnetic Nanoparticles Through Cellulose Matrix. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohamed Firaz, Mohamed Zarif Wazif (2021) Conceptual Study Of Enzymatic Sugar Ester Synthesis In The PBR At Steady-State And Isothermal Conditions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Amri, Mohammad Hanif (2021) Configuration Of Molecular Imprinted Polymers For Specific Uptake Of Pharmaceutical In Aqueous Media Through Radical Polymerization Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nordin, Mohammad Juhairi (2021) Observing The Limit Of Oscillation In Autocatalytic Reaction System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Arshad, Muhammad Hafizuddin (2021) Modelling Of Gas Diffusion In Mesoporous Tin Oxide (SnO2) Based Gas Sensor Effect Of Operating Temperatures And Gas Concentration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Badli, Muhammad 'Izzuddin (2021) Optimization Of Biodiesel Production From Waste Cooking Oil (WCO) Using ASPEN HYSYS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zainuddin, Muhd Izzudin Fikry (2021) Fabrication Of Anisotropic Poly (4-Methyl-1-Pentene) Membrane For CO2 And N2 Gas Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ngu, Hung Hui (2021) Conceptual Study Of Enzymatic Wax Ester Synthesis In The Batch Reactor At Steady State And Isothermal Conditions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Samsudin, Nur Fitri Syafiqah (2021) Zinc Removal From The Industrial Wastewater Using Activated Carbon Synthesized From Mangrove. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mansor, Nuramirah (2021) Application Of Kinetics – Thermodynamics Model And Adsorption Mechanisms For Inhibition Of Acid Corrosion On Mild Steel By Red Onion Peel Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zamri, Nurul Najihah (2021) Removal Of Methylene Blue Dye By Polyvinyl Alcohol/Multi-Walled Carbon Nanotubes Adsorbents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chan, Jyh Loong (2021) Study On The Effect Of Nitrite And Free Nitrous Acid On Cultivation Of Microalgae. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkepli, Syafiqah (2021) Effect Of Photoperiod Onto The Uptake Rate Of Phytoremediation Of Duckweeds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajee, Tanusha Sharma (2021) Interactive And Real-Time Dynamic Simulation Of A Heat Exchanger Using Python. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teoh, Xuan Chee (2021) Effects Of Film Thickness On The Sensitivity Of Tin (IV) Oxide Gas Sensor In Detecting Various Concentrations Of Benzene And Toluene Gases. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abdul Taib, Muhammad Haziq (2021) Amphoteric Adsorbent Coating For Pharmaceutical Waste (Diclofenac Sodium) Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tim, Mau Sean (2021) Optimization And Thermal Degradation Kinetics Of Cellulose Nanoparticles (CNPs) Production From Coconut Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Samsuddin, Muhammad Amir (2021) Enzyme Extraction From Pineapple Via Natural Based Aqueous Quaternary Biphasic System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Razam, Muhammad Azrie (2021) Synthesis Of Chitosan Activated Carbon Composite For Adsorption Of Brilliant Black Bn Dye From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sha’ari, Ahmad Syafiq Nazri (2021) Numerical Investigation Of Dva In Attenuating The Transmitted Handarm Vibration From The Motorboat Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nayagam, Brian Pravinnayagam Adie (2021) Analysis Of Vibration Characteristics In Centrifugal Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chong, Zhi Chien (2021) Design And Analysis Of Rubber Tapping Machine Using Ansys Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Anorhisam, Megat Naiman Megat (2021) High Strain Rate And Quasi-Static Compressive Failure Of Unidirectional Hybrid Kenaf Glass Fibre-Reinforced Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aza, Muhamad Farhan Husaini (2021) Simulation Of Passenger Flow And Waiting Time For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azlin, Mohamad Akmal Fahim (2021) Tribological Properties Of Vegetable Base Oils With. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azlee, Muhammad Haziq (2021) FEM Simulation on Stencil Bending Due to Squeegee Load during Solder Paste Stencil Printing Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nga, Eng Fon (2021) Residual Gratings Removal In Moiré Pattern Using Autoencoder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Suhaimi, Saiful Anwar (2021) On The Demand Of Electric Vehicles In Malaysia And Its Potential, Statistical Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Prbagaran, Sritharan (2021) Development And Characterization Of A Small-Scale Self-Sustained Steam-Biomass Gasifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Wei Cong (2021) The Impingement Flow Study on the Temperature Profile Perforated Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Goh, Chin Sin (2021) Evaluation Of Slope Stability Due To Earthquake And Rainfall Occurrences. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mokti, Nur Syazliana Abd (2021) Noise Level Assessment In Engineering Campus Of Universiti Sains Malaysia A Comparison Before And During Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adzly, Shafiq Ikhsham (2021) Analysis Of Motorcyclists’ Risk Perception Based On Cognitive Mapping Technique A Case Study Of Batu Kawan Industrial Park (Bkip), Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nyandau, Shaneez Christie (2021) The Influence Of Palm Oil Fuel Ash And Metakaolin On The Strength Of Concrete And Crack Resistance Of Reinforced Concrete Beam A Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akramah, Hamzah Atef (2021) The Impact Of Uplift Forces On The Connection Of Steel Cladding For Rural Houses In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fadzil, Sharfa Eliya Mohd (2021) The Development Of On-Board Communication System For A Cubesat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Fadzir, Amir Arifudeen Mohd (2021) Comparison of lower limb biomechanics during single leg landing between male and female volleyball recreational athletes. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Rahmat, Ainul Shazmira (2021) The effect of brain-breaks on physical activity level, physical activity motivation and cognitive functions among the medical students at Universiti Sains Malaysia. Working Paper. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Abdullah, Ammar Syahmi (2021) The physical activity interventions for children in school-based setting: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Salleh @ Othman, Farah Mat (2021) Exercise performance and thermoregulatory response to cold-water spray strategy: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Sivapragasam, Kavitha A/P (2021) The effects of daily gratitude writing and self-paced high intensity interval training on regulating emotional distress, sustained attention and hedonic perception among students in Universiti Sains Malaysia, Health Campus. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Kee, Lee Ann (2021) The practice and factors that influence exercise prescription by primary care physicians in Hospital Universiti Sains Malaysia: a cross-sectional study. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mustafa, Muhammad Alif (2021) Effects of environmental temperature on psychophysiological responses during high intensity interval exercise. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Rosdi, Muhammad Hafizuddin Ahmad (2021) Electromyography analysis of different instep kicking angle between kicking and supporting leg in football: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Razali, Muhammad Hidayatullah (2021) Comparison of bone health status and physical fitness component among young male sedentary individuals, frisbee and football players. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Fadli, Muhammad Nashihin Zoel (2021) Comparison of range of motion, reaction time, flexibility and balance ability between physically active and wheelchair user: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mansor, Nadhirah (2021) A biomechanical comparison of dominant versus non-dominant leg during single leg landing among female volleyball recreational players. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zaid, Nik Siti Nuramiza Aisyah Nik Mohd (2021) The effect of isometric exercise on intensity and duration of pain among physically inactive young females with primary dysmenorrhea. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Raof, Nur Dalila Adilah Abdul (2021) Physical activity status, nutrient intake, menstrual and bone status in overweight and obese women during the covid-19 pandemic lockdown 2.0 in Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Sabri, Nur Neesa Adryana (2021) Comparison of lower limb biomechanics during single leg landing among female recreational players with and without history of ankle sprain. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zarian, Nur Syara Afiqa (2021) Comparison of bone health status, muscular performance and anaerobic capacity between physically active hikers and sedentary individuals. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Ruhaizad, Nurul Shazwanis (2021) Effects of exercise with music on exercise performance and health variables among physically inactive individuals: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zamri, Puteri Nur Aisyah Mohd (2021) The effect of neuromuscular warm-up on balance and ankle mobility among Physically active females involved in pivoting team sports. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Hazman, Siti Nurhusna ‘Aqilah (2021) A scoping review of the exercise performance and thermoregulatory response to menthol cooling strategy in hot and humid environment. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Roslee, Siti Rafeeqah Sh (2021) Effect Of Rice Bran Wax-Rice Bran Oil Oleogel On The Rheology, Texture And Thermal Properties Of Butter Cake. Project Report. Universiti Sains Malaysia. (Submitted)

Soon, Yong Qi (2021) Incorporation Of Enzymatically Treated Stabilised Rice Bran In Butter Cookies: A Study On Physical, Textural And Rheological Properties. Project Report. Universiti Sains Malaysia. (Submitted)

Mohamed, Suhaila (2021) Physical, Chemical Properties, And Effect Of Storage Condition On Antioxidant Activity Of An Instant Blue Drink From Butterfly Pea Flowers (Clitoria Ternatea). Project Report. Universiti Sains Malaysia. (Submitted)

Nordin, Syamilah (2021) Fungal Contamination Of Spices Used In Local Malaysian Cuisines. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Jie Yi (2021) Survival And Penetration Of Salmonella Spp. Inoculated On Washed And Unwashed Eggshell Stored At Different Temperatures. Project Report. Universiti Sains Malaysia. (Submitted)

Teoh, Qi Yin (2021) Evaluation Of Direct Ozone Depuration On Shelf-Life Of Fresh Tropical Oysters (Crassostrea Iredalei). Project Report. Universiti Sains Malaysia. (Submitted)

Ting, Zhao Jing (2021) A Review On Nutritional Composition And Heavy Metal Content In Malaysia Aquaculture Products. Project Report. Universiti Sains Malaysia. (Submitted)

Lee, Le Xuan (2021) Antioxidant Capacity And Physicochemical Properties Of Green Tea As Influenced By Types Of Brewing Water. Project Report. Universiti Sains Malaysia. (Submitted)

Leong, Suet Wen (2021) Physicochemical And Antibacterial Properties Of Calamansi Lime And Pandan Leaf Essential Oil Nanoemulsions. Project Report. Universiti Sains Malaysia. (Submitted)

Lim, Qai Yeing (2021) Development And Characterization Of Polypropylene-Based Antimicrobial Active Packaging Incorporated With Transcinnamaldehyde. Project Report. Universiti Sains Malaysia. (Submitted)

Abdul Wahid, Nur Hafizah (2021) Effects Of Heat Moisture Treatment On The Physicochemical Properties Of Legume Flours. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Liu, Chiew Yen (2021) Development Of Cassava-Based Rice Analogue And The Study On Its Physicochemical Properties. Project Report. Universiti Sains Malaysia. (Submitted)

PPTI, Pusat Pengajian Teknologi Industri (2021) Development Of Starch-Based Imitation Cheese Spread. Project Report. Universiti Sains Malaysia. (Submitted)

PPTI, Pusat Pengajian Teknologi Industri (2021) Physicochemical And Nutritional Properties Of Nasi Lemak Prepared With Pumpkin Seed Milk. Project Report. Universiti Sains Malaysia. (Submitted)

PPTI, Pusat Pengajian Teknologi Industri (2021) A Short Review On Modification And Characterization Of Heat Moisture Treated Starch From Banana (Musa Spp.). Project Report. Universiti Sains Malaysia. (Submitted)

Baharuddin, Muhammad Zharfan Ahmad (2021) Superheated Steam Technology-Assisted Pasteurization For Milk: Nutritional Composition And Heavy Metal Contaminant Analysis. Project Report. Universiti Sains Malaysia. (Submitted)

PPTI, Pusat Pengajian Teknologi Industri (2021) The Use Of Superheated Steam Treatments On Rice Flour To Enhance The Quality Characteristics Of Laksa Noodles. Project Report. Universiti Sains Malaysia. (Submitted)

Abdul Wahid, Nur Hafizah (2021) Effects Of Heat Moisture Treatment On The Physicochemical Properties Of Legume Flours. Project Report. Pusat Pengajian Teknologi Industri.

Othman, Nur Hanani (2021) Development Of Rice-Based Snacks Fortified With Pumpkin Flour. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Samsudin, Nurul Afifah (2021) Microbial Contamination Of Dried Chillies, Chilli Pastes, And Chilli Powder Sold At Retail Market In Penang. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ariffin, Nurul Anis Jasmin (2021) Optimization Of Pre-Treatment Conditions Of Acid Blanching And Pectinase In Production Of Papaya Juice. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Zainal Abidin, Nur Amirah (2021) Partial Substitution Of Wheat Flour With Locust (Locusta Migratoria) Powder In White Salted Noodle Incorporated With Spi And Mtg With Incomplete Information: An Experimental Study. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Shamsudin, Nurul Athirah (2021) Effects Of Glucono-delta Lactone (Gdl) Dipping And In-pack Pasteurization Treatment On Rice Starch Noodles Properties Upon Storage. Project Report. Universiti Sains Malaysia. (Submitted)

Khairul Affendi, Nurul Haziqah (2021) Protein Extraction Of Locust (Locusta Migratoria) Via Acid Method. Other. Universiti Sains Malaysia. (Submitted)

Asrul Hadi, Nurul Sofea (2021) A Preliminary Study: Protein Extraction Of Migratory Locust (Locusta Migratoria) Via Alkaline Isoelectric Precipitation Method. Project Report. Universiti Sains Malaysia. (Submitted)

Jalaludin, Nurul Syafira Nabila (2021) Foam Properties Of Bahulu Batter As Influenced By Stabilizers. Other. Universiti Sains Malaysia. (Submitted)

Ong, Wen Le (2021) Optimization Of Papaya (Carica Papaya) Juice Quality Through Acidified Blanching Water And Pectinase Enzyme Pre-treatments. Project Report. Universiti Sains Malaysia. (Submitted)

Ahmad Tamezi, Raihan Amani (2021) Physical And Antioxidant Properties Of Cassava-based Rice Analogue. Other. Universiti Sains Malaysia. (Submitted)

Amir, Sazereen (2021) Physicochemical And Rheological Properties Of Fish Gelatin Modified By Tannic Acid. Other. Universiti Sains Malaysia. (Submitted)

Shee, Wei Yee (2021) Development Of Dragon Fruit Peel-based Snacks Bar. Other. Universiti Sains Malaysia. (Submitted)

Doraisamy, Hemarajan (2021) Influence Of Water Absorption On The Mechanical Properties Of Jute Fibre Bio-Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mumim, Juliana Simbah Anak (2021) Body image satisfaction and self esteem among undergraduate female nursing students in School of Health Sciences Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Shari, Nor Nabila (2021) Knowledge of chemotherapy and occupational safety measures among undergraduate nursing students in Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Nordin, Nur Najiha (2021) Knowledge and practice on endotracheal tube suctioning among nurses in critical care wards at Hospital Universti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Unpublished)

Hashim, Nur Sabrina (2021) Nurses’ knowledge, attitude and practice on eye care in critical care area at Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Rosle, Nur Shafiqah Mohamad (2021) Perceived stress and adherence to prevention measures during pandemic covid-19 phase among midwives in hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Nizar, Nur Zulaikha Azra Mohd (2021) Job stress level among non-academic staff in school of health sciences at Universiti Sains Malaysia (USM) health campus. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Sayuti, Nurhayati (2021) Psychological distress on online learning during the pandemic COVID-19 among undergraduate students at school of health sciences, Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Johan, Nurul Aina Syahidah Che (2021) Feasibility in using mobile health application among chronic kidney disease patient on haemodialysis in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Canti, Nurul Atikah Nuraini (2021) Knowledge on COVID-19 and practice towards prevention of covid-19 among undergraduate students in Health Campus Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zamri, Nurul Ezatti (2021) Attitude toward elderly patients among nursing students and clinical facilitators in Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Kamil, Nurul Farah Shahira Ahmad (2021) Knowledge and attitude on social anxiety disorder among undergraduate students at the school of health sciences, USM. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Azhar, Nurulhuda (2021) Knowledge and attitude on the nutrition of hospitalised elderly patients among nurses in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.. (Submitted)

Mohamed Zubir, Mohamed Fahim (2021) Modelling Of Reactive Distillation For The Production Of Methyl Tert-Butyl Ether (MTBE) Parametric Sensitivity Study On Kinetic Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Vengedesweren, Durgashene (2021) Conentrating Of Phosphate With Simultaneous Removal Of Sodium Chloride Via Nanofiltration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Thamudoran, Mohashiniee (2021) Effect Of Membrane Selectivity And Configuration On Purity And Recovery Of Hydrogen From Syngas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohan, Khamini (2021) Modelling Of Gas Diffusion In Mesoporous Tin Dioxide (SnO2) As Gas Sensor In Detecting Acetone Vapour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mariadas, Matiusdas S/O (2021) Effect of L-carnitine intake on exercise performance among athletes: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Haw, Michael Lo Zhen (2021) An investigation into the protein supplement’s use, type and frequency of exercise and potential factors influencing protein supplement use among gymnasium users in Sibu, Sarawak, Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Shakiren, Saidatul Shamine (2021) Aerobic exercise prescriptions on bone strength and postural stability: a scoping review. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Pauzi, Muhammad Syamil Mohd (2021) Effects of moderate- and high- intensity warm-up on exercise performance and psychophysiological responses during self-paced interval running. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Sharan, Nursharlina (2021) Energy intake and energy requirement of overweight non-smoking men during the covid-19 pandemic lockdown 2.0. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Mohamad, Hanis (2021) Modification On The Physico-Chemical Properties Of Rice Flour. Project Report. Universiti Sains Malaysia. (Submitted)

Ritzwan, Muhammad Rezza (2021) Aerodynamic Optimization Of Medium Altitude Long Endurance Unmanned Aerial Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ishak, Dayini (2021) Knowledge and attitude of pain management among nursing students in Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Jalil, Iswaneedawati Abdul (2021) Satisfaction of clinical learning environment among undergraduate nursing students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia. (Submitted)

Rosdi, Nur Amira Muhamad (2021) Awareness of type 2 diabetes mellitus (T2DM) among undergraduate students in School of Health Sciences. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Husny, Muhammad Ashraff (2020) Study On Structure Performance Of Inhouse Non-Destructive Unit System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lim, Siew Guan (2020) Physicochemical And Functional Properties Of Mango Seed Dietary Fiber Extract (Msdfe), Papaya Seed Dietary Fiber Extract (Psdfe) And Honeydew Seed Dietary Fiber Extract (Hsdfe). Project Report. Universiti Sains Malaysia. (Submitted)

Hormat, Nurhuda (2020) Usage Of Edible Coating To Improve The Quality And Shelf Life Of Tomato (Solanum Lycopersicum). Project Report. Universiti Sains Malaysia. (Submitted)

Jeganathan, Arvind Dayvaa (2020) The Strength Of Composite Polyamide With Different Molding Orientation Under High Strain Tension Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wen Chian, Liew (2020) Microbial Production Of Polyhydroxybutyrate (Phb) By Burkholderia Cepacia Bpt1213 From Different Carbon Sources And Its Fermentation Kinetics. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Lee, Zi Xin (2020) Influence Of Nitrogen Sources On Growth Profile And Their Kinetic Studies In Newly Isolated Acidophilic Microalgae, Coccomyxa Dispar And Scenedesmus Parvus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Anandita, Nadira (2020) Optimization Of Power From Food Waste Using Membrane-less Microbial Fuel Cell. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Devi Vadiveloo, Sajetra (2020) Effects Of Camptothecin On Pichia Pastoris Strain Smd1168h Expressing Dna Topoisomerase I On Agar Plates. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Zaidi, Aina Nadiah (2020) Influence Of Acidified Blanching Water And Pectinase Enzyme Treatments On Quality Of Carica Papaya Juice. Project Report. Universiti Sains Malaysia. (Submitted)

Ahmad, A’inul Mardhiah (2020) Effect Of Foaming Properties Of Defatted Rice Bran On Rheological And Baking Properties Of Eggless Cake In Comparison With Egg White. Project Report. Universiti Sains Malaysia. (Submitted)

Kai Xuan, Camilias OO (2020) Challenges In Producing Porous Starch: A Comparative Insight Between Sago And Corn Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Chin, Wen Yi (2020) Development Of Fermented Water Kefir Amaranth Drink. Project Report. Universiti Sains Malaysia. (Submitted)

Anuar, Fatin Nabila (2020) Reduction Of Oil Adsorption In Banana Fritter Balls: The Effect Of Hydrocolloid Substitution. Project Report. Universiti Sains Malaysia. (Submitted)

Hanapi, Hazimah (2020) Preparation And Characterization Of Ph-Sensitive Fish Gelatin Film Containing Anthocyanins Extracted From Rambutan Peel. Project Report. Universiti Sains Malaysia. (Submitted)

Radzi, Hilma Aini Md (2020) Incorporation Of Banana Peel Fiber In Jelly As A Functional Food Precursor. Project Report. Universiti Sains Malaysia. (Submitted)

Lam, Xue Mei (2020) Preparation And Characterization Of Intelligent Packaging Based On Torch Ginger Extract And Sago Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Lam, Xue Yuan (2020) Stability Of Wax-Based Oleogel As Novel Frying Medium Of Par-Fried French Fries. Project Report. Universiti Sains Malaysia. (Submitted)

Lim, Jia Her (2020) Isolation, Prevalence And Antibiotic Resistance Of Salmonella Spp. In Fish Obtained From Wet Markets In Penang, Malaysia. Project Report. Universiti Sains Malaysia. (Submitted)

Maniam, Manivannan Melvin Ravindran (2020) Understanding The B-Cyclodextrin Inclusion Complex Formation And Its Application In Antimicrobial Active Packaging System. Project Report. Universiti Sains Malaysia. (Submitted)

Anuar, Mohamad Aiman Mohamad (2020) The Development Of Aerated Dodol Product Using Foam Mat Drying Technology. Project Report. Universiti Sains Malaysia. (Submitted)

Mokhtar, Muhammad Wirawan Mohd (2020) Development Of Extruded Food Snack Using Modified Cassava Flour (Mocaf) With Addition Of Local Herbs. Project Report. Universiti Sains Malaysia. (Submitted)

Romli, Muhammad Hazim (2020) The Effects Of Figs As Sugar Substitute On Physicochemical Properties Of Soymilk Ice Cream. Project Report. Universiti Sains Malaysia. (Submitted)

Rafi, Najihah Mohd (2020) Effects Of Glucono-Delta-Lactone (Gdl) On Pasting, Rheological And Textural Properties Of Waxy Rice Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Hasan, Nik Nur Hidayah Nik (2020) Physicochemical Properties And Antioxidant Activity Of Green Grass Jelly Containing Sago Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Azman, Noor Amira Syamimi Noor (2020) Effect Of Wax-Based Oleogel As Novel Frying Medium On Oxidative Stability And Anthocyanin Retention Of Purple Sweet Potato Chips. Project Report. Universiti Sains Malaysia. (Submitted)

Kamaruzzaman, Noor Qamarina (2020) Development And Characterization Of Yogurt Like Probiotic Product From Jackfruit (Artocarpus Heterophyllus) Seed Milk. Project Report. Universiti Sains Malaysia. (Submitted)

Ahmad, Nor Afiqah (2020) Survival And Heat Resistance Of Salmonella Enterica Serovar Weltevreden In Blanched Vegetables At Different Temperatures. Project Report. Universiti Sains Malaysia. (Submitted)

Rashid, Nor Syahirah Abd (2020) Plant-Based Milk As An Alternative To Dairy Milk - The Challenges And Way Forward. Project Report. Universiti Sains Malaysia. (Submitted)

‘Asri, Norsyahira (2020) Microbiological Contamination Of Kerabu Dishes Sold At Cafes And Food Stalls In Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia. (Submitted)

Sidik, Nur Ain Rafidah Md (2020) Enzymatic-Treatment And Different Drying Conditions On Gac Aril (Momordica Cochinchinensis Spreng.) Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Bakar, Nur Aisyah Munirah Abu (2020) Effect Of Ozone Washing On Physicochemical Properties And Gel Strength Of Surimi Made From African Catfish (Clarias Gariepinus). Project Report. Universiti Sains Malaysia. (Submitted)

Badri, Nur Alisa Abdul Mutalib @ Ahmad (2020) Comparison Of Autoclave And Vacuum Oven Treatment On Rice Bran Stability And Chemical Properties. Project Report. Universiti Sains Malaysia. (Submitted)

Azahari, Nur Amiera Kamilia (2020) The Challenges In The Development Of Bread Using Modified Cassava Flour (Mocaf) With Addition Of Roselle Calyces Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Azahari, Nur Amiera Kamilia (2020) The Challenges In The Development Of Bread Using Modified Cassava Flour (Mocaf) With Addition Of Roselle Calyces Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Azman, Nur Thaherah Mior (2020) Physicochemical Properties And Enzyme Activity Of Polyphenol Oxidase And Peroxidase From Fresh Pomelo (Citrus Maxima) Juice. Project Report. Universiti Sains Malaysia. (Submitted)

Azlim, Nurnabila Afiqah (2020) Development Of Ph-Sensitive Gelatin-Based Intelligent Film Incorporating Dragon Fruit Skin Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Ooi, Jia Yi (2020) Development Of Cream Crackers Containing Coconut Palm Sugar: Nutritional Composition And Sensory Analysis. Project Report. Universiti Sains Malaysia. (Submitted)

Rahman, Rosmiza Abd (2020) The Use Of Aquafaba, Plant Protein Isolate And Soy Lecithin To Replace Egg In Kuih Bahulu. Project Report. Universiti Sains Malaysia. (Submitted)

Sidek, Siti Shafinaz Mohd (2020) Modification Of Tamarind Seed Starch With Octenyl Succinic Anhydrate (Osa) In The Production Of Mayonnaise. Project Report. Universiti Sains Malaysia. (Submitted)

Moyeen, Tahsina (2020) Physicochemical And Antibacterial Characteristics Of Citrus Essential Oil Nanoemulsions. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Kwan Liang (2020) The Effect Of Different Pineapple Ripeness On The Physicochemical, Microbiological Properties Of Fermented Kefir Drink. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Wei Ting (2020) Evaluation Of Rice Husk Powder As An Anticaking Agent In Coffee Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Vinnie, Ang Jia Wen (2020) Comparison On Composition And Physical Properties Of Dried Locust (Locusta Migratoria Manilensis) Powder From Different Sources. Project Report. Universiti Sains Malaysia. (Submitted)

Zikri, Wan Zulaikha Adrina Wan Ahmad (2020) Glycemic Index Values Of Instant Multigrain Beverage: Current Knowledge And Future Prospects. Project Report. Universiti Sains Malaysia. (Submitted)

Yau, Xiang Ming (2020) Development Of Sesame Oil-Based Non-Dairy Creamer. Project Report. Universiti Sains Malaysia. (Submitted)

Lee, Zi Xin (2020) Influence Of Nitrogen Sources On Growth Profile And Their Kinetic Studies In Newly Isolated Acidophilic Microalgae, Coccomyxa Dispar And Scenedesmus Parvus. Other. Universiti Sains Malaysia. (Submitted)

Liew, Wen Chian (2020) Microbial Production Of Polyhydroxybutyrate (Phb) By Burkholderia Cepacia BPT1213 From Different Carbon Sources And Its Fermentation Kinetics. Other. Universiti Sains Malaysia. (Submitted)

Anandita, Nadira (2020) Optimization Of Power From Food Waste Using Membrane-Less Microbial Fuel Cell. Other. Universiti Sains Malaysia. (Submitted)

Chok, Wen Xin (2020) Extraction And Identification Of Elastase Inhibitory Peptides From Digested Ovalbumin As Skin Anti-Aging Therapeutics Agent. Other. Universiti Sains Malaysia. (Submitted)

Bhaskar, Hariyaran (2020) Drone Based People Counter And Tracking Using Unique Id Using Opencv Python. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Baharuddin, Ismat Muhsin (2020) Correlating Effect Of Polymer Molecular Chain Length And Properties Of Polyvinylidene Difluoride (PVDF) For Carbon Dioxide (CO2) Removal In Membrane Gas Absorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Joey Lew Hui, Lin (2020) Identification Of Morphology, Growth Kinetic And Secondary Metabolites Synthesized In Green Freshwater Microalgae (Coccomyxa Dispar). Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Khoo, Zenyang (2020) Investigation Of Different Harvesting Methods For Microalgae Coccomyxa Sp. Biomass. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Chin Peng, Lim (2020) Effect Of A Lactobacilli Probiotic On Longevity And Mobility Of Male Drosophila Melanogaster With Alzheimer’s Disease. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Kok, Boon Hui (2020) Production Of Novel Recombinant Anti-PFHRP2 VNAR-G1 Protein Using Escherichia COLI BL21(DE3) Expression System. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Yan Leong, Kah (2020) Physical Extraction Of Flagellavia Ultrasonication From Bacillus Subtilis 168 With Various Control Elements. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ting Lim, Hui (2020) Effects Of A Lactobacilli Probiotic On Survival And Mobility Of Female Drosophila Melanogaster With Alzheimer’s Disease. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Mirza Mohammad Faizal, Mohammad (2020) Effect Of Different Yeast Extract Concentration In Membrane-less Microbial Fuel Cell (Ml-mfc) For Electricity Generation Using Food Waste As Substrate. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Alif Faiz Mohd Din, Muhammad (2020) Extraction Of Secondary Metabolite In Tetraselmis Suecica Using Different Solvent Polarity. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Adilla Mahmud, Nur (2020) Enzymatic Hydrolysis And Lactic Acid Bacteria Fermentation Of Okara. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ezzreen Zafhrina Mohamad Redza, Nur (2020) Fermentation And Purification Of Lipase By Burkholderia Metallica Using Column Reactor. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Farizatul Husna Mohd Noor, Nur (2020) Analysis Of Palm Oil Waste After Pretreatment Using Environmental Recycling System (Ers) For The Potential Application As Animal Feed. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Izatul Anis Muhammad Jais, Nur (2020) Kinetic Model For Growth And Influence Of Ph On The Growth Of Halochlorella Rubescens In A Fabricated Photobioreactor. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Shuhada Baharuddin, Nur (2020) Lactic Acid Production From Broken Rice Via Fermentation Process. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ramli, Saadiah (2020) Enzymatic Hydrolysis And Yeast Fermentation Of Okara. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Nur Aqilah Abdul Wahab, Siti (2020) Biosynthesis Of Poly(3-hydroxybutyrate) By Cupriaviadus Necator Dsm 428 Utilizing Waste Date Fruits As A Carbon Source. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Sulaiman, Ummi Syakina (2020) Production Of Protein Hydrolysates From Soy Okara By Rhizopus Oligosporus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Nurnadia Diyana Sulaiman, Wan (2020) Production Of Protein Hydrolysates From Soy Okara By Aspergillus Oryzae. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Chuen Yeong, Kah (2020) Determination Of The Effect Of Ph On Microalagal Growth And Protein Content In Locally Isolated Tetraselmis Suecica And Scenedesmus Parvus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Isa, Nur Shahirah (2020) Knowledge on Deep Vein Thrombosis and prevention practice among nurses in Hospital Universiti Sains Malaysia. Other. Pusat Pengajian Sains Perubatan. (Submitted)

Lew, Joey Hui Lin (2020) Identification Of Morphology, Growth Kinetic And Secondary Metabolites Synthesized In Green Freshwater Microalgae (Coccomyxa Dispar). Project Report. Universiti Sains Malaysia. (Submitted)

Khoo, Zenyang (2020) Investigation Of Different Harvesting Methods For Microalgae Coccomyxa Sp. Biomass. Project Report. Universiti Sains Malaysia. (Submitted)

Kok, Boon Hui (2020) Production Of Novel Recombinant Antipfhrp2 VNAR-G1 Protein Using Escherichia Coli Bl21(DE3) Expression System. Other. Universiti Sains Malaysia. (Submitted)

Kok, Boon Hui (2020) Production Of Novel Recombinant Antipfhrp2 Vnar-G1 Protein Using Escherichia Coli Bl21(De3) Expression System. Other. Universiti Sains Malaysia. (Submitted)

Leong, Kah Yan (2020) Physical Extraction Of Flagella Via Ultrasonication From Bacillus Subtilis 168 With Various Control Elements. Other. Universiti Sains Malaysia. (Submitted)

Lim, Hui Ting (2020) Effects Of A Lactobacilli Probiotic On Survival And Mobility Of Female Drosophila Melanogaster With Alzheimer’s Disease. Other. Universiti Sains Malaysia. (Submitted)

Lim, Chin Peng (2020) Effect Of A Lactobacilli Probiotic On Longevity And Mobility Of Male Drosophila Melanogaster With Alzheimer’s Disease. Other. Universiti Sains Malaysia. (Submitted)

Mohammad Faizal, Mohammad Mirza (2020) Effect Of Different Yeast Extract Concentration In Membrane-Less Microbial Fuel Cell (ML-MFC) For Electricity Generation Using Food Waste As Substrate. Other. Universiti Sains Malaysia. (Submitted)

Din, Muhammad Alif Faiz Mohd (2020) Extraction Of Secondary Metabolite In Tetraselmis Suecica Using Different Solvent Polarity. Other. Universiti Sains Malaysia. (Submitted)

Mahmud, Nur Adilla (2020) Enzymatic Hydrolysis And Lactic Acid Bacteria Fermentation Of Okara. Other. Universiti Sains Malaysia. (Submitted)

Redza, Nur Ezzreen Zafhrina Mohamad (2020) Fermentation And Purification Of Lipase By Burkholderia Metallica Using Column Reactor. Other. Universiti Sains Malaysia. (Submitted)

Noor, Nur Farizatul Husna Binti Mohd (2020) Analysis Of Palm Oil Waste After Pretreatment Using Environmental Recycling System (Ers) For The Potential Application As Animal Feed. Other. Universiti Sains Malaysia. (Submitted)

Jais, Nur Izatul Anis Muhammad (2020) Kinetic Model For Growth And Influence Of pH ON THE Growth Of Halochlorella Rubescens In A Fabricated Photobioreactor. Other. Universiti Sains Malaysia. (Submitted)

Baharuddin, Nur Shuhada (2020) Lactic Acid Production From Broken Rice Via Fermentation Process. Other. Universiti Sains Malaysia. (Submitted)

Ramli, Saadiah (2020) Enzymatic Hydrolysis And Yeast Fermentation Of Okara. Other. Universiti Sains Malaysia. (Submitted)

Wahab, Siti Nur Aqilah Binti Abdul (2020) Biosynthesis Of Poly(3-Hydroxybutyrate) By Cupriaviadus Necator Dsm 428 Utilizing Waste Date Fruits As A Carbon Source. Other. Universiti Sains Malaysia. (Submitted)

Sulaiman, Ummi Syakina (2020) Production Of Protein Hydrolysates From Soy Okara By Rhizopus Oligosporus. Other. Universiti Sains Malaysia. (Submitted)

Sulaiman, Wan Nurnadia Diyana (2020) Production Of Protein Hydrolysates From Soy Okara By Aspergillus Oryzae. Other. Universiti Sains Malaysia. (Submitted)

Yeong, Kah Chuen (2020) Determination Of The Effect Of Ph On Microalagal Growth And Protein Content In Locally Isolated Tetraselmis Suecica And Scenedesmus Parvus. Other. Universiti Sains Malaysia. (Submitted)

Roslan, Mawwar Nadhirah (2020) Knowledge, attitude and awareness towards breast cancer among female nursing students in School of Health Sciences. Other. Pusat Pengajian Sains Kesihatan.

Azman, Norakhmal Syahirah (2020) Sleep quality and associated factors among elderly in Hospital Universiti Sains Malaysia (USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Aziz, Norsyafieka (2020) Knowledge and awareness of sepsis among orthopaedic patients in Hospital Universiti Sains Malaysia (Hospital USM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Wong, Kean Seng (2020) Development Of Edible Oleogel For Capsaicin Delivery. Project Report. Universiti Sains Malaysia. (Submitted)

Shafii, Noorazliyana (2020) Effect of oral supplementation of channa striatus extract on total antioxidant status during wound healing in post lower segment caesarean section women. Other. International Medical Journal. (Submitted)

Ismail, Zul Izhar Mohd (2020) A morphometric evaluation of nasal septum in patients with rhinosinusitis and association with its severity. Other. Pusat Pengajian Sains Perubatan. (Submitted)

Lazim, Norhafiza Mat and Abdullah, Abdul Mokhti and Abdullah, Baharuddin and Ismail, Zul Izhar Mohd (2020) Significance of nasal septum angulation and its association with rhinosinusitis symptom scores. Other. Pusat Pengajian Sains Perubatan. (Submitted)

Omar, Julia (2020) Evaluation of wound healing biomarkers of Interleukin 6 (IL-6), vascular endothelial growth factor (VEGF) and matrix metalloproteinases 9 (MMP-9) in post lower segment caesarean Section (LSCS) patients consuming channa striatus extract. Other. Bangladesh Journal of Medical Science. (Submitted)

Marcus, Mexmollen (2020) Comparing the effectiveness of video self-instruction versus traditional classroom instruction for learning cardiopulmonary resuscitation skills among first year medical students in Universiti Sains Malaysia. Other. Pusat Pengajian Sains Kesihatan. (Submitted)

Karim, Mohd Firdaus A. (2020) Understanding factors associated with delay in seeking treatment among locally advanced and metastatic breast cancer in Hospital Raja Perempuan Zainab II. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Noor, Mohamad Hamzi Mohamad (2020) Ergonomic risk assessment of musculoskeletal disorders (MSD) during simulated endotracheal intubation in Hospital Universiti Sains Malaysia (HUSM). Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia.

Rahim, Mohamad Hazni Abd (2020) Hand hygiene's knowledge, perception and self-reported performance among nurses at tertiary care hospitals in Kelantan, Malaysia. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Ismail, Mohd Azmi (2020) Intelligent Manufacturing And Energy Sustainability. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jumahat, Wan Nur Azlin Hanis (2019) Combination Of Coagulation-Ultraviolet Photocatalytic Treatment By Using Zinc Oxide With Polyarcylamide And Tannin For Removal Of Colour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Jie Shin (2019) Investigation On The Mechanical Properties Of Glass Fiber Reinforced Polymer (Gfrp) Hybrid Composite With Eggshell Powder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chong, Chee Moi (2019) Tracking system using neural network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zulharis, Muhammad Haris (2019) Study Of Hospital Noise At Parit Buntar Hospital, Parit Buntar, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Munnian, Ruthrakumar (2019) Analysis Of Failure In Offline English Alphabet Recognition With Data Mining Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Muhammad Safwan Abdul (2019) Application Of The Dynamic Vibration Absorber To Reduce The Noise And Vibration Of The Automotive Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kee, Seow Pei (2019) Brovey Transform Based Image Fusion For Impurities Segmentation And Detection On Edible Bird’s Nest. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khor, Chong Hwa (2019) Classifying Indian Classical Dances By Motion Posture Patterns. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ong, Xhin Jie (2019) Design Of Ankle Foot Orthosis (Afo) Using 3d Printing For Patient Comfort And Agility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Arumugam, Sagaathevan (2019) Development Of Sonic Air Flow Meter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kumar, Kesava Raj Vijaya (2019) Food Waste Carbonization Using Icrowave Oven. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shaari, Mohd Farhan (2019) Performance Study Of Kitchen Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ganesan, Raguvaran (2019) Vibration Analysis Of The Dam Physical Model Due To The Effect Of Water Spilling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azizan, Anis Natasha (2019) A Development Of An Internet Of Things Equipped Unmanned Ground Vehicle For Surveilance Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Roslan, Abdul Qayyum (2019) Airfoil With Membrane At Low Reynolds Number. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Halim, Aiqa Arbila Abdul (2019) Comparison Of Engine Performance For Different Type Of Engines With Alternative Fuels During Complete Flight Trajectory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ruddin, Putri Annur Khaleeda Amer (2019) Composite Drilling Monitoring System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Johari, Nur Juliana Ahmad (2019) Design And Analysis Of Cansat Module For Education. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chan, Quan Xin (2019) Computational Fluid Dynamics (Cfd) Simulation Of Low Renolds Number Flow Over Airfoils For Unmanned Aerial Vehicle (Uav). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Cheaw, Boon Hong (2019) Design And Development Of An Insect-Inspired Micro Air Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Low, Jianyan (2019) Development And Testing Of Swimming Fish Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tan, Chun Khuen (2019) Development Of A Subscale Aircraft For Flutter Test Platform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lam, Kuek Shen (2019) Development Of Electron Temperature And Density Probe (Tenep) For Mysat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sharif, Muhammad Arif Syafiq Md (2019) Drone Based Image Processing For Precision Agriculture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chan, Ze Yu (2019) Effect Of Vibration Frequency On Naca 4412 Airfoil Aerodynamic Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tan, Aik Kwan (2019) Electronic Cooling By Using Barium Titanate (Iv) Nanofluid With Loop Heat Pipe (lhp). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sim, Sing Mei (2019) Evaluation Of Combustion Characteristic On 2d Cylindrical Combustion Chamber For Different Operating Conditions And Using Alternative Fuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zulkeflee, Rahmah (2019) Experimental Analysis Of Stability And Thermal Conductivity For Silica Nanofluid In Water Block Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Nithikorn Suvanamporn, Nithikorn (2019) Flexural And Post-Fire Flexural Properties Of Eggshell Hybrid Glass Fibre Reinforced Polymer (Gfrp) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Kodi, Saravanan Thunsh (2019) Instrumentation Monitoring For Heavy Metal Detection In Batik Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Leong, Yong Chee (2019) Integrated Parameters Measurement Of Brushless Direct Current Motor And Control For Quadcopter Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lim, Yew Hao (2019) Investigation On Dynamics, Performance And Pitch Angle Optimization Of Vertical-Axis Turbines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ravindran, Nirresh Prabu (2019) Investigation On Effects Of Arfoil Variation In A Slotted Propeller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lee, Jie Shin (2019) Investigation On The Mechanical Properties Of Glass Fiber Reinforced Polymer (Gfrp) Hybrid Composite With Eggshell Powder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Nazri, Syaiful Nizam (2019) Mode 1 Fracture Toughness Of Natural Fibre Reinforced Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Radzi, Mohamad Akmal Ridzuan (2019) New Develop Small Scale Machine Of Non-Destructive Test (Ndt) For Composite Inspection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lee, Hui Yin (2019) Obstacle Avoidance Using Convolutional Neural Network For Drone Navigation In Oil Palm Plantation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Linghan, Samanaseh (2019) Parameter Tuning Of An Active Force Control For Cmg-Based Controlled Small Satellite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Othman, Noor Raweyah (2019) Project Management Documentation For Mysat Development Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Yap, Kai Wen (2019) Proportional-Derivative Linear Quadratic Regulator Controller Design For Improved Directional And Lateral Motion Control Of Unmanned Aerial Vehicles. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Roslan, Nur Khaleda (2019) Setting Up Openfoam To Model Gas Flow Through A Nozzle Into A Vaccuum Using Snappyhexmesh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sulaiman, Zularieff Redzwan (2019) Strenght And Stress Analysis On Helicopter Rotor Blade Grip. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Rosli, Mohamad Afiq Syarafuddin (2019) Stress And Strength Analyses On The Single Pilot Moveable Seat For The Ultra-Light Helicopter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mustapa, Nabila (2019) Study Of Aerodynamic Performances Of Gliders Using Computational Fluid Dynamics Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ng, Kian Kiong (2019) The Development Of Software For A Satellite Ground Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Raihan, Mohamad Norherman Shauqie Mohamed (2019) The Developments Of Proportional-Double Derivative-Linear Quadratic Regulator Controller For Attitude And Altitude Motions Of A Quadcopter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Subramaniam, Viknaraj (2019) Water Tunnel Turbulence Intensity Investigation For Micro-Hydrokinetic Turbine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Husein, Nur Syuhadah (2019) Wind Induced Noise In Microphone Cavity Of Two Way Radio. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Marcdo, Jong Min Inn (2019) A Computional Study On Influence Of Circular Perforation In Web On Structural Capacity Of Reinforced Concrete Sheet Piles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hassan, Siti Amirah Abu (2019) A Study Of Flow Characteristics At Stilling Basin Of Tawau Dam Spillway, Sabah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Nur Athirah (2019) Activated Carbon-Limestone-Alginate (Ala) Beads For The Removal Of Colour And Turbidity From Kerian River Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yap, Wei Keat (2019) Ammoniacal Nitrogen Removal From Landfill Leachate By Heat Activated Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Muhammad Nasrul Asraf (2019) An Investigation On Construction Sequence Of An Arch-Shaped Tensegrity Structure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Srigaran, Prabagaran (2019) Analysis On The Effects Of Gradation Of Sand On Shear Strength Characteristics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamal, Nurzulaikha Mohd (2019) Application Of Computational Fluid Dynamics In An Outer Channel Of Orbal Biological System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Muhammad Khuzaimi (2019) Assessment Of Diluted Methanol As A Foaming Agent In Latex Modified Asphalt Mixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Manoharan, Jegathisan (2019) Assessment Of Hook End Steel Fibre As A Substitute Material In High Performance Concrete Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Muhamad, Edy Mustaqim (2019) Assessment Of Noise Pollution Exposed To Workers In Furniture And Metal Factory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shawal, Luqman Hakim (2019) Assessment Of Raw And Coagulated Latex Wastewater Of Enhance Aeration Stabilization Basin (Asb) A Batch Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faizal, Muhammad Ikhlas Saufi Mohd (2019) Assessment Of Water Quality In High-Rise Residential Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Munusamy, Shanbagarani (2019) Assessment On Flow Characteristics Of Tawau’s Spillway Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yahya, Siti Aishah (2019) Assessment On Heavy Goods Vehicle Conspicuity Based On The Road Transport Act 1987. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nge, Jia Sheng (2019) Assessment On The Performance Of Asphalt Mixtures Prepared With Adhesion Promoters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teo, Chia Chia (2019) Cost Analysis Of Low Rise Buildings Subjected To Seismic And Non Seismic Action. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Singh, Amarpreet Kaur Mahinder (2019) Critical Success Factors For Malaysian Contractors In International Construction Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Baharin, Lailatus Syarah Kamarol (2019) Development Of Uv Light And Water Filtering System During Flooding Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ho, Kar Meng (2019) Dynamic Characteristics And Seismic Performance Of Reinforced Concrete Buildings Experiencing 5 June 2015 And 8 March 2018 Sabah Earthquakes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yazid, Nurulfatin Aqilah Mohd (2019) Effect Of Coated Expanded Polystyrene (Ceps) Beads Aggregates On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nordin, Nuratikah Ahmad (2019) Effect Of Silica Fume On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Zheng Xian (2019) Effect Of Soil Grain Size On The Oil Migration In The Capillary Fringe Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Razif, Mohammad Zahin Mohammad (2019) Estimating the reduction of carbon dioxide (co2) emission from private vehicles in penang island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozman, Norrazatin Haida (2019) Effect Of Different Pre-Treatments On Functional And Physicochemical Properties Of Octenyl Succinic Anhydride (Osa) Modified Sago Starch In Pickering Emulsion. Project Report. University Science Malaysia. (Submitted)

Rosly, Siti Munirah (2019) Nutritional Composition, Heavy Metals And Antioxidative Properties Of Multigrain Beverage Powder. Project Report. University Science Malaysia. (Submitted)

Hassan, Siti Amirah Abu (2019) A Study Of Flow Characteristics At Stilling Basin Of Tawau Dam Spillway, Sabah. Project Report. Universiti Sains Malaysia. (Submitted)

Munusamy, Shanbagarani (2019) Assessment On Flow Characteristics Of Tawau’s Spillway Hydraulic Physical Model. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Sak Jie (2019) Active Vibration Control Of The Suspended Handle Using Inertia-Type Piezoelectric Actuator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hanafiah, Amir Hamzah M. (2019) Application Of Autonomous Maintenance To Reduce Failure Rate Of Bearings In Food Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rasidi, Nazirul Asyraff (2019) Application Of Internet Of Things (Iot) On Controlled Vertical Agriculture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Pe Hao (2019) Assessment Of Fabric Waste As Fuel In Biomass Gasification System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Hann Woei (2019) Classification Analysis Of Sleep Quality On The Active Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sulaiman, Mohammad Shah Affandi (2019) Combustion Characteristics Of A Swirl Combustor Operating On Kerosene Vegetable Cooking Oil (Vco) Fuel Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nordin, Mohd Zuhairi (2019) Combustion Stability Analysis Using Vegetable Oil In Micro Gas Turbine Combustion Chamber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Woan Wei (2019) Conceptual Analysis Of Lean Manufacturing (Lm) Principles For Small And Medium Enterprise (Sme). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Jian Xin (2019) Construction Of Hybrid Geometric Modelling For Injection Mould Using Cadcam System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sam, Jun Kok (2019) Control Of 3d Printer Using Drone With Autopilot And Raspberry Pi Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Anuar, Muhammad Akmal Adib (2019) Control Of Welding Robot Using Drone With Autopilot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Su Sze (2019) Data Mining On Machine Breakdowns And Effectiveness Of Scheduled Maintenance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lai, Pin Siew (2019) Data Mining On Retail Banking Simulation Model To Devise Productivity Improvement Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chiang, Xiao Tong (2019) Design And Development Of A Locking Mechanism For A Gear-Based Prosthetic Knee Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tai, Pei Li (2019) Design And Development Of An Ankle Joint Rotator For Lower Limb Prosthesis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sidek, Nur Shafikah (2019) Design And Fabrication Of Chevron-Notch Plain-Strain Fracture Toughness Testing System For Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chai, Yik Zhien (2019) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Oon, Bee Mun (2019) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Foo, Mun Yee (2019) Design Improvement For Replica Trophy Using Reverse Engineering And Cnc Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Ming Wei (2019) Design Improvement Of Photobioreactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adnan, Muhammad Zikri (2019) Design Optimization Using Numerical Simulation And Experimental Of Wind Energy Harvester Unit From Exhaust Fan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Ci Qian (2019) Development Of A Material Delivery System Of 3d Printing Used For Building Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Saifuddin, Siti Adawiyyah Siddiqa (2019) Development Of Artificial Intelligence (Ai) For Image Processing And Conceptual Distance Computation From Camera For Pick And Place Of Oil Palm Fresh Fruit Bunch (Ffb). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ramli, Muhammad Faiz (2019) Development Of Hydraulic Launch Assist Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mahyuddin, Muhammad Syahir (2019) Development Of Hydraulic Regenerative Braking Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Megat, Nik Muhammad Ashraf Che (2019) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ngo, Yi Bin (2019) Development Of Ultrasonic Scalpel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yeo, Ying Heng (2019) Diesel Engine Control And In-Cylinder Peak Pressure Monitoring System Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Heng, Jing (2019) Digitalization Of Operator Skill Competency By Development Of Information System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lo, Thye Wei Clarence (2019) Effect Of Draw Bead Geometry And Applied Force To Drawing Of Aluminium AA6061. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Alexander, Tan Wai Teng (2019) Effect Of Error Augmentation Training Strategy On Engagement In Rehabilitation Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Daud, Nurul Ain Mat (2019) Effect Of Hole Size, Sheet Thickness And Material Type To The Performance Of The Self-Clinching Fastener. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Too, Mei Xian (2019) Effect of machining parameters on the surface finish quality of natural fiber composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yusoff, Nur Maisara Mohamed (2019) Effect Of Pressure And Droplet Number On Smt Adhesive Dispensing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Abdullah, Umar Mujahid (2019) Effects Of Nanoparticles Concentration To Transport Properties Of Nanofluids Using Molecular Dynamics Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Poon, Heong Wai (2019) Evaluation Of Stress Relaxation In Bentonite Filled Rubber Under Tensile Load Using Scanner Based Digital Image Correlation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wahab, Andyqa Abdul (2019) Experimental Investigation On The Performance Of Regeneration For Axial Flow Multilayer Silica Gel Hollow Cylinder Desiccant Bed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wahidon, Amirul Faez (2019) Experimental Modelling And Control Of Pneumatic Cylinder For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fauzi, Muhammad Fahmi Hasifi Md (2019) Experimental Performance Of Humid Air Turbine Fueled By Biomass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yusof, Wan Putera Saidina Umar Wan (2019) Fluid-Structure Interaction (Fsi) And Sediment Transport Study Of Tnb Hydropower Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mitchelle, Law Jyy Jinn (2019) Implementation Of Proportional, Integral And Derivative(Pid) Terms For Thermal Management Through Simulink And Arduino Platform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Marzuki, Nur Aimi Amanina Mohd (2019) Implications Of Pressure And Range Of Motion On Posterior Fixation Of Thoracolumbar Burst Fractures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Latiffi, Nur Ainul Nurina Ishak (2019) Improving The Force Delivery Trend Of Nickel-Titanium Archwire In Orthodontic Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chong, Jia Jun (2019) Influence Of Copper Pillar Bump Structure On Flip Chip Packaging During Reflow Soldering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Iqbal, Ahmad Amir Shafiq Ahmad (2019) Mechanical Evaluation Of Femur Geometry And Hip Protectors Using Pendulum-Based System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamaluddin, Fazrullah (2019) Microwave Tar Thermal Cracking System For A 10kw Downdraft Gasifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fun, Seng Phan (2019) Modelling Of Mechanical Behaviour Of Electronics Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Toh, Han Yaung (2019) Moiré Method Based Tilt Sensing System For Landslides Monitoring Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Mew Yaw (2019) Numerical Simulation On The Performances And Emissions Of The Direct Injection Compression Ignition Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Awang, Muhamad Haidar (2019) Numerical Study Of Plate Heat Exchanger For Erema Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Amin, Ahmad Bulya Md (2019) Pedal Exercise Machine For Physical Rehabilitation Of Stroke Patients. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chandhira, Gajjhenthra Richard Raj @ (2019) Pin Transfer Of Epoxy Resin (Glycerin) On The Led Housing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Eng Yeong (2019) Pretrained Convolutional Neural Networks As Feature Extrator Of Eggshell Mottling Pattern For Quality Inspection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Basir, Nor Afiza Abdul (2019) Quality Analysis For Defect And Defective Component Parts On Printed Circuit Board (Pcb) Using Dmaic Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ooi, Yi Jing (2019) Relationship Of Tribological Property Of Different Flooring Textures On Human Mobility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Taufik, Rais Ahmad (2019) Scalable Fabrication Of Nickel Micropillars Using Ultra-Violet Photolithography Process For Microelectronics Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Juma’at, Mohamad Haziq (2019) Simulation Of Blood Flow Through Transcatheter Heart Valve (Thv) Using Ansys Fluid Structure Interaction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chiang, Han Xi (2019) Structural Analysis Of Thermoformed Electroluminescent Printed Lighting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chek, Muhammad Asyraf Wan (2019) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Md Khidir Amin Md (2019) Study Of Physiochemical Characteristics Of EFB Briquettes And Its Potential Use As Dual Feul In Cvcc. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jamil, Nurul Izzati Mohamad (2019) Study on drawing die radius to load and thinning pattern of aluminium alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Foo, Chun Yit (2019) The Effects Of Lubrication On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adman, Amirul Akil (2019) The Effects Of Material Properties On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Hui Xin (2019) The Implementation Of Plan-Do-Check-Act Cycle To Improve The Production Line Productivity In Surface Mounted Technology Area Of Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Yong Ren (2019) The main factors affecting key characteristics of fuel-efficient driving and safe driving. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Ahmad Norarif Amin (2019) The Vibration Analysis Of Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Gan, Zheng Ho (2019) Thermal Analysis Of Non-Newtonian Fluid Flow Over Superhydrophobic Surface. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shaharudin, Akmarul Hisham (2019) Thermoelectric Power System From A Liquid-Fueled-Fired Porous Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Muhammad Dhirar As Suhaimi (2019) Three-Dimensional Fatigue Crack Growth Analysis Using Failure Mechanism Approach In Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Lia Dayana Abdul (2019) Total Industrial Safety Culture In Manufacturing Sector. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Loh, Yuan Ting (2019) Tribological Property Of Road Marking Paint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Muhammad Amin Zaquan Mohd (2019) Uph Improvement On Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Voon, Zhen Liang (2019) Vibration And Noise Attenuation On A Straight Chain Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Teo, Chen Lung (2019) Flow Visualization Study Of Water Tunnel For Micro-Hydrokinetic Turbine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zaki, Muhammad Hazwan (2019) A Study On The Effect Of Extreme Rainfall Intensity On Slope Stabilty Using Physical Based Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Nik Aisyah Sofea Nik (2019) An Experimental Investigation On Pull Through Failure Of Roof Cladding To Purlin Connection Considering Overhang Roof. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nizam, Ahmad Nikmall Syharifuddin Ahmad (2019) Chicken Feather Fibres As An Adsorbent In Treating Heavy Metal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aznan, Noor Nabila (2019) Effect Of Shredded Recycled Powder Free Latex Gloves On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nasir, Mohammad Nazmi Mohammad (2019) Silica gel multilayer desiccant hollow cylinder bed for axial flow dehumidification adsorption operations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chai, Tying Tying (2019) Ferroelectric Thin Film Materials Deposition By Physical Vapor Deposition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Zen Yang (2019) Challenges And Benefits Of Implementing Green Building Technology In Building Construction Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fatinah, Nor and Mail, Mohamad Saufi Zuhan and Azhar, Norain Mohd and Shaharudin, Shazlin (2019) Relationships between core strength, dynamic balance and knee valgus during single leg squat in male junior athletes. Other. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia. (Submitted)

Azhar, Norain Mohd and Affandi, Nor Fatinah and Mail, Mohamad Saufi Zuhan and Shaharudin, Shazlin (2019) The effects of foot position on lower extremity kinematics during single leg squat among adolescent male athletes. Other. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia. (Submitted)

Azhar, Mohd (2019) Relationship between isokinetic leg strength and knee frontal plane projection angle during single leg squat among male junior athletes. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Zahiran, Amirah and Abdullah, Muhammad Irwan and Shaharudin, Shazlin (2019) Comparison of physiological and 2d kinematic variables during 2 km time trial on stationary versus dynamic rowing ergometer. Other. Pusat Pengajian Sains Kesihatan, Universiti Sains Malaysia. (Submitted)

Ismail, Mohd Azmi (2019) Experimental Investigation On A Desiccant Silica Bed for Dehumidification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohd Azmi (2019) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohd Azmi (2019) Heat Transfer Perfomance Of A Synthetic Jet Generated By Diffuser-Shaped Orifice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kiew, Ooi Foong (2019) Effects of consuming a Malaysian acacia honey drink prior to, during and post exercise on physiological responses, blood glucose metabolism, urine osmolality and running timetrial performance in the heat. Project Report. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia.

Azlan, Maryam (2019) The role of Monocytic Microparticles (mMP) in endothelial cell function. Project Report. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia. (Submitted)

Keng, Wong Kah (2019) 9th International conference on biosience, biochemistry & bioinformatics 2018. Project Report. Pusat Pengajian Perubatan. (Submitted)

Thiyagu, Thanigesh (2018) Superhydrophobic Surface Modification On The Fabric Face Mask Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hamdan, Muhammad Hidayat (2018) Characterization Of The Noise And Vibration Patterns Of The Vehicle HVAC System Under Various Operating Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Anuar, Siti Aisyah (2018) Preparation And Characterization Of Phase Inversion Poly (Vinyl Alcohol)/ Multi-Walled Carbon Nanotubes Dye Removal Adsorbents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abdullah, Noor Salihah (2018) Evaluation Of Hydroxyapatite From Fish Bone As Potential Protein Adsorber And Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad Romil, Rozaida (2018) A Study On The Relationship Of Rock Strenght And Grindability Of Limestone, Granite And Metallic Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ghazali, Muhammad Faris Afdhal (2018) Adhesion Performance Of Solvent-Based Adhesive In Medical Tube. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Masraff, Mimi Syahira (2018) Aligning Of Carbon Nanotubes With An External Electric Field To Improve Thermal Conductivity Of Polydimethylsiloxane Nanocomposites Interface Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ishak, Atiikah (2018) Assessing Optical And Photocatalytic Properties Of Metal Coupled Ti02 Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad, Nor Syafiqah (2018) Corrosion Behavior Of Quenched SAC305 Solders. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ramli, Norahasyima (2018) Crystallization Of Iron Oxide Nanotubes By Anodization And Their Relation To Photocatalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hamdan, Nur Zafirah (2018) Curing Characteristics, Tensile And Morphological Properties Of Tea Waste Filled Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Shi Chin (2018) Development Of Carbonated Hydroxyapatite (CHA) Porous Scaffolds For Bone Tissue Engineering Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Woo, Wei Jin (2018) Development Of Neem Modified ZnO Photocatalyst Incorporated LDPE For Antimicrobial Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Safuan, Nurfarah Rasyidah (2018) Development Of Superhydrophobic And Self-Cleaning Surfaces Using Silane-Based Material And Cu-Doped TiO2 Nanoparticles For Ceramic Wall Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Mohamad Fadhlin (2018) Effect Of Acidic Calcium Phosphate Solution Concentration On The Setting Properties Of Porous Β-Tricalcium Phosphate Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Jia Ying (2018) Effect Of Catalysts On The Formation Of Titanium Hydride Under Hydrogen Atmopshere. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Wahab, Haziq Mudzakir (2018) Effect Of High Temperature On Oxidation Behavior Of Superheater Materials Formation Of Protective Oxide Scale. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chamnek, Arvitcha (2018) Effect Of pH And Contact Time On The Adsorption Of Heavy Metals In Acid Mine Drainage Using Hydrated Lime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sarimon, Nurul Atikah (2018) Effect Of Silver On Sol-Gel Derived Bioglass System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Halim, Mohd Fahmi Hafiz (2018) Effect Of Spot Welding Processing Parameters On Ferrous And Non Ferrous Metal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sallehuddin, Nurul Jannah (2018) Effects Of Annealing Treatment On Thermal And Mechanical Properties Of Poly (Lactic Acid). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ameer, Nur Dinie (2018) Evaluation Of Tin In Amang From Rahman Hydraulic Tin Sdn. Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Anuar, Siti Nur Nabilah (2018) Fabrication And Characterization Of Bioactive Glassalginate Scaffolds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siew, Tuck Seong (2018) Fabrication Of Polysiloxane Based Stretchable Ink Filled With Silver Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ivon, Tiew (2018) Fish Bone Waste As Potential Source Of Apatite For Bone Replacement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khazali, Mohamad Razif (2018) Geophysical Subsurface Gravity Survey Modeling Of Segamat- Kuantan Using Matlab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wan Saberi, Wan Ahmad Nazmi (2018) Hydrogeochemistry Characteristics Of Water And Stream Sediment Originated From Activities Surrounding Gunung Paku, Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Zaidi, Mohamad Za'im (2018) Hypochlorite Leaching Of Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ong, Mun Yee (2018) Kinetics Of Crystallization For Polypropylene/Polyethylene/Halloysite Nanotube Nanocomposites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Nashir, Mohd Khairul Nidzam (2018) Mineralogy And Geochemical Study Of Air Piau, Kelantan Gold Prospect (Drill Core). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rafie, Muhammad Akhmal Firdaus (2018) Modified Poly (Lactic Acid) (PLA) Filament For 3d Printing With Improved Thermal Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alias, Nur Syahida (2018) Multicomponent Gas-Solid Reactions Kinetic Modelling Of NiOFe2O3 Reduction In Natural GAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hamizai @ Hamizzi, Mohamad Faiz (2018) Physical And Chemical Characterization Of Complex Gold Ore From Peranggih Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Muzaffar, Hud (2018) Physical And Chemical Characterization Of Malaysian Sulphide Gold Ore From East Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zabidi, Muhammad Afiq (2018) Physical And Chemical Characterization Of Tin In Amang From West Coast Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Pelawang, Khairul Shazwan (2018) Prediction Of Blast-Induced Ground Vibration During Blasting At Lafarge Quarry Kanthan, Ipoh, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Hilmi, Mohamad Suffian (2018) Processing Of Coarse Sand From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Juhari, Aisyah Shahirah (2018) Rock Slope Stability Analysis Using Photogrammetric Method At Hume Cement Quarry, Gopeng, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sardi, Nur Syamsinar (2018) Room Temperature Self-Healable Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amiruddin, Atikah Zulaikha (2018) Soldering Characteristics And Corrosion Behaviour Of Indium Added To SAC305 Solder Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

So’od, Nurul Fazliniza (2018) Studies On The Effect Of Addition Modified Sago Starch On Mechanical Properties Of Natural Rubber And Synthetic Polyisoprene Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Marobi, Mohammad Ajwad (2018) Surface Oxidation Of Copper For CuO Nanowires Formation And Their Catalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohmad Saridi, Mohamad Husaini (2018) Synthesis And Characterization Of Different Polyol Soft Segments In The Preparation Of Palm Kernel Oil Polyol Based Shape Memory Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chang, Wan Ling (2018) Synthesis Of Zinc Selenide Quantum Dots By Successive Ionic Layer Adsorption And Reaction (SILAR) Method For Quantum Dot Sensitized Solar Cells (QDSSC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ibrahim, Nur Fatin Nabila (2018) The Effect Of Various Compatibilizers On Properties Of Mengkuang Leaf Fibre Filled Poly (Lactic Acid) Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Ashikin, Nor Fazreeniza (2018) Thermal And Rheological Properties Of 3D Printed Polylactic Acid Plasticized With Polyethylene Glycol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Noor, Mohamad Ikhwan (2018) Effect Of Different Types Of Banana Plants Fibres On The Physical, Mechanical And Thermal Properties Of Agar Based Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Shah, Mohd Faizatul Shahrizal (2018) Investigation On Processing Parameter Of Single Screw Extrusion Using Experimental And Numerical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Chee Leong (2018) Synthesis And Characterization Of Manganese Dioxide Nanoparticles Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Naserun, Nur Izzati (2018) Disinfection By-Products Precursors Removal By Simultaneous Coagulation And Disinfection In River Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yap, Cia Ling (2018) Mechanical And Electrical Properties Of Short Carbon Fibre Reinforced Polycarbonate Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azmi, Latifah Suha (2018) Physical And Chemical Characterization Of Iron Ore From East Coast Of Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Aaznan, Nur Aina Najeehah (2018) Removal Of Arsenic Using Synthetic Iron Oxyhydroxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Seow, Pek Ying (2018) Tensile Properties And Water Absorption Of Wood Sawdust Filled Polypropylene Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Isa, Mohd Norhafidan (2018) The Development Of Gas Turbine Engine Using Turbocharger. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zailan, Nur Nadhirah (2018) Characterization And Potential Industrial Appication Of Gypsum Rich Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Norfaizal, Nurhafiz Syaza (2018) Comparison Of Different Types Of Sago Starch Dispersion And On Mechanical Properties Of Biodegradable NR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lease, Jacqueline (2018) Electrochemical Characterization Of Lithium Vanadium Oxide Anode With Agar Binder In Aqueous Rechargeable Lithium Ion Batteries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad, Amirul Asraf (2018) Mineral Liberation Studies Of Complex Gold Ore From Peranggih Prospect, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Mohamad Haikal (2018) Mineral Liberation Studies Of Complex Sulphide Gold Ore From Pahang, Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yap, Soon You (2018) Study The Synthesis Parameters And Effect Of Addition Of Acid Hydrolyzed Sago Starch On Mechanical Properties Of NR And XNBR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammed Kassim, Mohammed Zul Azeem (2018) The Effect Of Thickness Reduction On Microstructure And Mechanical Propertiesof Cold Rolled And Cryorolled Low Carbon Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Darryl Wong, Jun Chen (2018) The Impact Of Different Lateral Size Of Graphene Oxide On The Performance Of The Emulsified Acrylate-Based Pour Point Depressant And Its Application In Crude Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chim, Jia Wen (2018) Quality Assessment Of 3d-Printed Plastic Parts Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amrik Singh, Dalbir Singh Banwait (2018) Development Of Lower Limb Stroke Rehabilitation Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razali, Sali Amirah (2018) Study On Mechanical And Thermal Properties Of Fired Clay Brick From Five Different States In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Subramaniam, Purawin (2018) A Feasible Architecture Of Real-Time Collision Avoidance And Path Planning For Semi-Autonomous Unmanned Ground Vehicle (Ugv). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chan, Min Xhao (2018) Aerodynamic Characteristics Of Membrane Airfoil Compared To Rigid Naca 4412 Airfoil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa.

Chin, Mun Xue (2018) Autonomous Target Tracking Of A Quadrotor UAV Using Monocular Visual-Inertial Odometry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Yiap, Joo Zheng (2018) Design And Analysis Of Satellite's Ground Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Wong, Seng Man (2018) Design And Development Of A Fixed-Wing Vertical Take-Off And Landing Unmanned Aerial Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tong, Poh Eng (2018) Design And Development Of Water Tunnel For Flow Visualization Study On Micro-Hydrokinetic Turbine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Abdul Latif, Muhammad Aadam (2018) Development Of Generator Circuit For Electron Temperature And Density Probe (Tenep) For Mysat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sallehuddin, Uwaiz (2018) Development Of High Fibre Volume Fraction Natural Fibre Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mazlan, Mohamad Rukaini (2018) Development Of Light Weight Propeller Bracket. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ahmad Zahiri, Saifulmajdy (2018) Development Of Natural Fiber Reinforced Composite Prepreg. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sim, Chiow Moon (2018) Development Of The USM Wind Tunnel Validation Model For Calibration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Aminuddin, Mukhlisin (2018) Effect Of Fibre Orientation On The Mechanical Properties Of Sandwich Composite Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Maniam, Senebahven (2018) Evaluating The Effect Of Deterioration On The Engine Performance And Its Emissions Running On Alternative Fuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ng, Wei Quan (2018) Experimental Study On The Performance Of Vertical Axis Hydrokinetic Turbine In Realistic Stream Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Soh, Ling Xin (2018) Flow Field Measurement Of Fish And Development Of Fish Like Underwater Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Asrab Ali, Muhammad Imran Salim (2018) Heat Transfer Enhancement Of Lithium-Ion Battery Using Nanofluids. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mohd Nizom, Ahmad Nabil (2018) Image Processing Of Digital Mammograms For Breast Cancer Detection And Classification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Hassan, Muhammad Addin (2018) Influence Of Aviation Fuel On The Room Temperature And Post-Fire Compression Properties Of Sandwich Composite Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ahmad Yusni, Amira Syuhadah (2018) Inspection Of Drill Bit Point Angle Using Image Processing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lee, Chern Khai (2018) Nanofluids In Battery Cooling System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Foong, Xipeng (2018) Numerical Investigation On The Aerodynamics Of Vertical Axis Hydrokinetic Turbines With Semi-Empirical Data. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zainudin, Muhammad Hakiim (2018) On-Board Data Handling For Cubesat Using Raspberry Pi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Lim, Guang Ming (2018) Path Planning Optimization For Solar-Powered Perpetual Flight Across The World. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Subramaniam, Sasidaran (2018) Power Subsystem Design Of The Malaysian Youth Satellite (Mysat). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Duasing, Joshua Boniface (2018) Structural Integrity Of Composite Laminates Panel Using Ultrasound Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Roslan, Farah Syafiqah (2018) Study On The Effects Of Alternative-Kerosene Fuel Mixture On Combustion Spray Characteristics For Different Spray Half Cone Angle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Mah, Chuen Tak (2018) Wind Tunnel Experiment Of Aeroelastic Flutter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Gan, Ka Jing (2018) A Study On The Effect Of Overfill Design On The Structural Behaviour Of Precast Concrete Closed Spandrel Arch Bridge. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Low, Zhao Xuan (2018) An Investigation On Construction Sequence Of Irregular Multi-Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faisal, Farhanah (2018) An Investigation On Stress Concentration Of Point-Fixed Bolted Glass System Subjected To Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Hamid, Nur Fatin Najiyah (2018) Assessment Of Road Traffic Noise At Residential Area In Nibong Tebal, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Che Kamahrudin, Puteri Nihal (2018) Assessment Of Seismic Scenario-Structure-Based Limit State Criteria For 23-Storey Of RC High-Rise Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yern, Chi Kian (2018) Assessment Of Structure-Specific Seismic Fragility Curves Of Buildings Using Spo2frag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chong, Hong Rui (2018) Comparative Study Of Bs8110 And Eurocode 2 Standards For Design Of A Factory Reinforced Concrete Flat Slab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chuah, Hoi Ching (2018) Comparison Between Bs 5950 And Eurocode 3 For The Design Of Pre-Engineered Steel Structure Of A Factory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamad Nor, Nur Atiqah (2018) Comparison Of Road Traffic Noise At Residential Areas In Nibong Tebal, Penang And Klang Valley. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Chun Hua (2018) Density And Permeability Properties Of Over Compacted Sands And Laterites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rohalim, Nurfatihah Idayu (2018) Determination Of Flood Inundation For Sungai Bertam By Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Yi Ben (2018) Determination Of Ground Structure Using Microtremor Array Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarulzaman, Fasihah (2018) Development Of Sultan Abu Bakar Spillway Dam Rating Curves For Flood Mitigation Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yazid, Muhammad Amar Firdauz (2018) Effect Of Ground Motion On Seismic Design Of Low To Medium Rise Infilled Moment Resisting Concrete Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ruzi, Nor Aerina Aerin (2018) Effect Of Horizontal Pattern On Masonry Prism Strengthened Using Carbon Reinforced Polymer (Cfrp) And Glass Reinforced Polymer (Gfrp). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohsin, Mohammad Nazeem (2018) Effect Of Silica Fume Inclusion On Properties Of High Strength Concrete Containing High Volume Of Steel Slag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Make, Chee Fong (2018) Effect Of The Vertical And Horizontal Web Reinforcement On Deep Beam With Strut-And-Tie Model With Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Damanhuri, Nur Amira Nadia (2018) Effectiveness Of Coagulationflocculation Process For The Removal Of Chemical Oxygen Demand (Cod), Color And Suspended Solid In Industrial Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shubandrio, Farid Aizuddin (2018) Effects Of Partial Replacement Of Natural Aggregate By Recycled Aggregate From Asphalt Pavement On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed Izham, Aimi Syuhada (2018) Empirical Investigation Of Walking Speed For Bi-Directional Flow At Angled-Walkway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

M Poovaneshvaran, Sharvin (2018) Evaluation Of Crumb Rubber And Latex Modified Asphalt Binders For Pavement Crack Sealant Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Shin Ru (2018) Evaluation Of The Combined Effects Of Long Term Aging And Moisture Damage On Asphalt Mixture Incorporating Cubical Aggregates And Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghozali, Noraini (2018) Experimental Investigation On Pedestrian Behaviour Walk In Inundation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Wakif, Sarah Alia (2018) Experimental Study Of The Hydraulic Efficiency Between A Depressed And A Non-Depressed Grate In Bandar Baharu, Kedah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Susanna Liow, Soo Yee (2018) Flexural Behaviour Of Rubberized Concrete Compared To Normal Reinforced Concrete Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Zu Yi (2018) Flexural Capacity Of Ultra-High Performance Fibre Reinforced Concrete (Uhpfrc) Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghani, Ahmad Danial Kahfi (2018) Flood Hazard Map Of Sungai Kulim Using High Percentage Of Overlapping Images Captured By (UAV) Drone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Moreen, Daryl Justine (2018) Industrialised Building System (IBS) Quality Testing For Disaster Resilience From Technical And Non-Technical Perspectives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wan Mohd Ali, Wan Norfazlinda (2018) Investigation Of Microbiological Concentration In Indoor Air At School Classrooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruzaman, Nur Aini (2018) Managing Structure Related Risks For Highway Tunnelling Project In Malaysia A Contingency Plan For Menora Tunnel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahamad Lazin, Nur Fajrina (2018) Manganese Removal From Synthetic Wastewater Using Pyrolyzed Chicken Feather Fiber (PCFF). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Ju Kit (2018) Mechanical Properties Of Reclaimed Asphalt Pavement Mixtures With Rejuvenator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Wai Kit (2018) Parametric Study On The Effectiveness Of A Novel Flat Truss Shape Punching Shear Reinforcement Using Finite Element Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tee, Xin Lei (2018) Pedestrian Route Choice Of Vertical Facilities At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Wee Zheng (2018) Performance Of Rubberized Modified Asphalt Mixutres Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zailan, Masezatti (2018) Prediction Of PM10 Concentration Using Multiple Linear Regression And Support Vector Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sobri, Ammar Solehi Ahmad (2018) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig Humidity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Maizul, Elly Nur Myaisara (2018) Quantitative Analysis And Mapping Of Concrete Scanning Electron Microscope (SEM) Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azami, Nor Hafilia (2018) Rainwater Harvesting System For Surau An-Nur, Taman Pekaka, Nibong Tebal, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusoff, Siti Nur Aishah (2018) Removal Of Solids, Total Coliform, E.Coli, UV254, Colour And Turbidity Using Limestone Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Weoi Jye (2018) Removal Of Total Coliform, E. Coli, UV254, Particles, Total Dissolved Solids (TDS), Suspended Solids (SS), And Colour Using Zeolite And Activated Carbon Mixture In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tung, Wen Yan (2018) Rock Slope Stability Assessment Using Photogrammetric Mapping And Limit Equilibrium Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Chin Guan (2018) Seismic Response Analysis Of Buildings In Malaysia Subjected To Near-Field And Far-Field Ground Motions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ramli, Nur Amanina (2018) Study Of PM2.5 Concentration At School Near Road Side In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Louis Tan, Pao Chiang (2018) Study On The Traffic Impact Of Logistic-Related Land Use. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Vivian Lim, Wei Wen (2018) Study On The Behavior Of Right-Turning Vehicles At Different Types Of Unsignalised Intersections In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusri, Yushani Syafrina (2018) Sustainability Factors Influencing Industrialised Building System (LBS) Prospects For Post-Disaster Building Reconstruction From Productivity And Quality Aspects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abd Rahim, Siti Aini Nabilah (2018) The Effectiveness Of Deoderatex Membrane Treatment Of Odour At Toilet In Vertical Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Zi Guan (2018) The Effectiveness Of On-Site Detention For Water Quantity Control In Taman Ilmu Using Stormwater Management Model (SWMM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lock, Pui Yee (2018) The Efficiency Of Tapered Steel Section With Perforation Under Shear Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ali, Siti Najihah (2018) The Implementation Of Motorcycle Junction Box To Reduce Motorcycle Accident Rate In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhar, Muhamad Syahmi (2018) The Influence Of Damages On The Static Performance Of Single-Layer Cable Net Structure Supported Glass Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Cheng Kuan (2018) The Structural Efficiency Of Tapered Steel Section With Perforation Under Lateral Torsional Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abu Bakar, Siti Nurwajihah (2018) Treatment Of Landfill Leachate By Palm Oil Waste Carbon Copper-Oxide Nano Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md.Nor, Nuramalina (2018) Treatment Of Toilet Odor Using Horizontally Placed Odor Removal Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusoff, Nur Hayati (2018) Treatment Of Young Leachate Using Electrocoagulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Yih Ken (2018) Twin Tunnel Interaction Mechanism In Kenny Hill Formation Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Sze Yee (2018) Verification And Validation Of Buildingexodus Based On The Walking Speed Of People With Disabilities (PWD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yeap, Kee Leong (2018) Aloe-Polysaccharides Thin Film As All-Natural And Flexible Resistive Random Access Memory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahman, Najihatul Nabihah (2018) Analysis Of Rock Fragmentation Using Wipfrag At Lafargeholcim Rawang Quarry, Selangor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Bunyam, Timothy Lambat (2018) Attempt To Reducing The Ground Vibration Level Due To Blasting Activity Based On The Evaluation Of Blasting Geometry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yew, Lih Wei (2018) Bioactive Glass Reinforced Polyurethane Scaffold Effect Of Hard Segment Content Of Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Asri, Muhammad Anas (2018) Blasted ORE Fragmentation And Its Influence On Excavators Productivity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Aiman (2018) Carbonisation Of Dead Leaves Biomass As Activated Carbon For Potential Application As Reinforcement Filler In Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Thajudin, Nuur Laila Najwa (2018) Comparison Of Mechanical, Physical And Thermaproperties Of Conventional Plastics Fabricated Using 3D Printing And Injection Moulding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liew, Xian Yun (2018) Development Of Bismuth Particles Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ooi, Lhaang Chee (2018) Effect Of Compaction Pressure And Addition Of Silicon On Microstructure And Compressive Properties Of Porous Magnesium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chai, Shir Ying (2018) Effect Of Different Type Of Isocyanates On The Properties Of Shape Memory Polyurethane Elastomer Based On Palm Kernel Oil Polyol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azami, Khairunnisa Azalin (2018) Effect Of Electron Beam Irradiation Of High Density Polyethylenewaste Tire Powder (Hdpewtp) Blends On Processability, Tensile Properties And Morphological Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chua, Jing Ting (2018) Effect Of Fused Deposition Modelling Fabrication Parameters On The Tensile Properties Of Acrylonitrile Butadiene Styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Abdul Fatah Zulkarnain (2018) Effect Of La2O3 Addition On The Hardness And Indentation Fracture Resistance Of Zta-Ceo2-La2o3 Ceramics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahari, Mohamad Abdul Aziz (2018) Effect of Magnesium ION (Mg2+) Substitution and Calcination to the Properties of Biphasic Calcium Phosphate (BCP). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mazlee, Muhammad Ihsan Firdaus (2018) Effect Of Various Grinding Mechanisms During Particle Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nik Jusoh, Nik Anis Hafiza (2018) Effect Of ZnO Seed Layer On The Growth Of ZnO Nanorods Via Solution Precipitation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Chi Loon (2018) Effects Of Halloysite Nanotube On The Mechanical, Thermal And Morphological Properties Of Polypropylenepolyamide Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Aziz, Khairunnisa (2018) Epoxy-Polyamide-Methyl Ethyl Ketone Laminate Systems Simulation On The Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chow, Li Chin (2018) Fabrication And Characterization Of Polylactic Acid (PLA) Blend Biomaterial Using 3D Printing For Potential Application In Tissue Engineering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Karim, Mohamad Afiffudin (2018) Formation And Durability Investigation On Graphene-Based Superhydrophobic Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Boey, Zhan Hei (2018) From Natural Bio-Resource Waste To Akermanite Bioceramics For Synthetic Bone Substitution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Meor Akil Julnasir, Nurwahidah (2018) Full Simulation Of Cycle Time Using Talpac Software At Lafarge Kanthan Quarry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Razak, Muhamad Syahizat (2018) Groundwater Exploration By Using Electrical Resistivity Survey. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Othman, Ainnur Hanim (2018) Hygrothermal And Wear Behaviour Of Short Carbon Fiber Reinforced Polycarbonate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Milus, Mohd. Nur Fahmie Ikhwan (2018) Numerical Investigation Of Non- Newtonian Fluid During Mold Filling Process With Phase Change Consideration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Osman, Norainin Sofea (2018) Optimisation Of Apatite Bioceramic Formation From Waste Dental Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Zaki, Nur Amierah An-Nissa' (2018) Processing Of Heavy Minerals From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Choo, Hong Han (2018) Reactivation, Oxidation And Surface Functionalization Of Spent Activated Carbon For Glycerin Decolourization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alaudin, Nur Asleena (2018) Self Assembly Gold Nanoparticles Modified Electrode For The Electrochemical Detection Of Mercury And Lead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Perumal, Suchitra (2018) Simultaneous Hydrolysis-Leaching Of Synthetic Manganese Ore Using Bamboo Saw Dust And Computational Analysis Using Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Nur Husna (2018) Study On The Relationship Between Tensile And Hardness Properties On Several Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kong, Chee Xian (2018) Superior Hardness Of Zirconia Toughened Aluminaceramics Through Co-Addition Ofmagnesium Oxide Andlanthanum Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ruzlan, Muhammad Hakim (2018) Synthesis Of Polycrystalline Silicon Carbide Using Aluminum Carbide And Calcium Carbide With Silicon Tetrachloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamaruddin, Nur Izaani Akma (2018) The Effect Of Milling Time, Stirring Speed And Ball Mill To Powder Ratio Of Malaysian Tin Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yaacob, Solihin (2018) The Used Of UAV-Based Photogrammetry For Discontinuity Mapping At Hume Cement Quarry, Malim Nawar Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khong, Ling Xin (2018) Treatment Of Iron In Groundwater Using Pebble Size And Sand Size Marble Column Filter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ab Han, Norfateha (2018) Weathering Classes In Relation To Physical And Mechanical Properties Of Decomposed Granite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ang, Wei Keat (2018) 0.18 um CMOS Power Amplifier for 2.45 GHz IoT Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ng, Hong Shen (2018) 2D Swarm Meerkats Behavior Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mamat, Shahrul Azmam (2018) 3D Openjpeg2000 With Integer KLT. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Kong, Chun Lei (2018) Artificial Neural Network For Crosstalk Prediction In Stripline Transmission Lines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Kumaran, Vignes (2018) Automatic Number Plate Recognition By Using Matlab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Wan, Zhi Xuan (2018) Bio Acoustic Signal Identification Based On Sparse Representation Classifier Frog Species Voice Identification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tajudin, Nur Atikah (2018) Comparison Of Various Alogrithms In Different Loading Of Load Flow Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mohammad Alias, Mohd Azim (2018) Current Steering Digital Analog Converter (DAC) Using Partial Binary Tree Network (PBTN). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mat Jemin, Mohammad Azreen (2018) Controlling Differential Motor Using Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Saidi, Mohamad Hazim (2018) Deep Learning Based Face Attributes Recognition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Cheong, Leong Kean (2018) Defect And Components Recognition In Printed Circuit Boards Using Convolution Neural Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Halim, Nuranisah (2018) Design And Analysis Of A CMOS Image Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ng, Sing Yee (2018) Design And Development Of Collision Avoidance Strategy For Differential Drive Mobile Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Zulkifli, Mohamad Nazren (2018) Design And Development Of Single-Axis Solar Tracking System Using Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Rasidi, Syafira (2018) Design And Simulation Of Low Power Comparator Using Low Power Design Techniques For Analog Circuits. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Unpublished)

Chia, Ying Ying (2018) Design And Simulation Of Resonant Tunneling Diode (RTD) Based High Frequency Monolithic Microwave Integrated Circuit (MMIC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ramakrishnan, Thinnesh Kumar (2018) Design Of 0.13-µm CMOS Low Noise Amplifier With Enhanced Input Matching Performance And Flat Gain For Cognitive Radio Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Roslan, Muhammad Asyraf (2018) Design Of 0.13-µm CMOS LNA With Flat Gain For Cognitive Radio Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tan, Hui Wen (2018) Design Of 0.18-µm CMOS Voltage Controlled Oscillator (VCO) For 2.45ghz IOT Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Abu Bakar, Mohamad Redzuan (2018) Design Of 0.18-μm CMOS Mixer For Medradio Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mar, Hee Sheng (2018) Development Of An IoT Environmental Information System For Users Of GPS-Based Public Transport. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ooi, Yoong Khang (2018) Development Of Android Based Health Monitoring System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chew, Chin Boon (2018) Development Of Automatic Liver Segmentation Method For Three- Dimensional Computed Tomography Dataset. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Sim, Kai Sheng (2018) Development Of Autonomous Drone For Multipurpose Functions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ooi, Teik Chen (2018) Development Of CDMA Wireless Sensor Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mohamad Noor, Noorfairuse (2018) Development Of Digital Image Re-Colouring Algorithm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Abdul Halim, Zulkifli (2018) Development Of Power Management Circuitry For Battery Less Body Patch. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ng, Wei Jian (2018) Development Of Real-Time IoT-Based Environmental Monitoring System For Air Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Nor Azli, Muhammad Aid'zuddin (2018) Dielectric Properties Of Kenaf-Based Kraft Paper For High Voltage Insulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mat Sauki, Siti Syafiqah (2018) Dielectric Properties Of Virgin Coconut Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Md Hanif, Mohamad Norhafifi (2018) Distributed Cooperative Synchronization Control Of 2 Articulated Robots For Industry 4.0 Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Hamidi, Muhammad Najwan (2018) Efficiency Comparison Of Direct DC-AC Power Conversion System And Conventional Power Conversion Systems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tang, Khai Luen (2018) Embedded Artificial Intelligent (AI) To Navigate Cart Follower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Thiagarajan, Durgesh (2018) Embedded Ethernet System For Real-Time Communication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Anuar, Muhammad Haris Azman (2018) Facial Recognition Door Lock Using Raspberry Pi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chia, Pei Kiak (2018) Hardware And Software Development Of ECG Biometric System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Loo, Fang Hean (2018) Hardware And Software Partitioning Using Genetic Algorithm In Image Processing Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tan, Jia Zheng (2018) Hardware Software Partitioning Using Particle Swarm Optimization (PSO) In Image Processing Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Jamil, Muhammad Shaumil (2018) High Speed Imaging To Determine The Dynamic Of Ball. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Saad, Muhamad Tarmizi (2018) Implementation Of Elevator Control System Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mohd Nor, Masyirah (2018) Implementation Of Hardware Software Partitioning In Embedded System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Haji Ahmad Tajudin, Putri Nurzubaidah (2018) Implementation Of Principal Component Analysis Technique In Peak To Average Power Ratio. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Abdullah, Muhammad Firdaus (2018) Implementing Centre-Symmetric Local Binary Pattern (CS-LBP) In Raspberry PI For Iris Recognition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mat Yusof, Nur Syazana (2018) Improving The Understanding Of The Dynamic Properties Of Advanced Communication Networks By Using Agent-Based Modeling Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chan, Wui Hung (2018) Improving Accuracy In Automatic Modulation Classification Of Digital Modulated Signals Using Design Of Experiment Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ruzaidi, Nurul Effah (2018) Indoor Localization And Direction Sensing Via RFID Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Rashid, Mohd Sharimin (2018) Investigate And Simulate DC/DC Buck Regulator By Using LTspice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Rosnan, Murni Nur Athirah (2018) Investigation Of Edge Detection Techniques Based On Brain Tumor Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Heng, Qiao Hui (2018) IoT-Based Environmental Condition Monitoring System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ng, Ping Jian (2018) Localization For Underwater Robot Using Camera And Light Source. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Segaran, Abbiramavali (2018) Low Noise Amplifier For Medradio Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Koh, Ye Sheng (2018) Microcrack Detection And Noise Reduction In Integrated Circuit Packages. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Gan, Siew Ling (2018) Modified Image Enhancement Algorithm For Dorsal Hand Veins Imaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tiong, King Hock (2018) Monitoring And Fault Diagnosis Of Electrical Installation Using Thermal Imaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Yew, Chang Chern (2018) Obstacle Detection And Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Nik Mohamed Hazli, Nik Muhammad Aiman (2018) Optimization Of Pid Controller Using Grey Wolf Optimzer And Dragonfly Algorithm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mohd Ramdan, Fatin Najwa Nursyadza (2018) PAPR Reduction Using Genetic Algorithm (GA) In OFDM System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tan, Lit Chez (2018) Parallelization Of CCSDS Hyperspectral Image Compression Using C++. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Sah Azmi, Syeikh Muhammad Haziq (2018) Pedal Power Energy Harvesting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ng, Lay Wei (2018) Performance Analysis In IoT Based Home Automation Using Hybrid RS-LDPC Codes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Abdul Sani, Nur Syahirah (2018) Performance Analysis Of A Five phase 10-Slot/4-Pole PMSM For Electric Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mohamad Zukri, Rabiatul Adawiyah (2018) Performance Of Newton-Raphson Method For Load Flow Analysis In ILL-Conditioned Systems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Rosli, Muhammad Nasrul Faiz (2018) Photovoltaic Thermal Collector System Based On Heterojunction Intrinsic (HIT) Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Muniappan, Logaruthran (2018) Physical Modeling Of Multi Quantum Well (MQW) P-I-N InGaAs InAlAs Solar Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chin, Wei Chun (2018) Power Delivery Network Modeling And Simulation By Using Delaunay-Voronoi Triangulation And The Latency Insertion Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Ab Mutalib, Muhammad Haziq (2018) Printed Elliptically Polarized Star Dipole Antenna. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Quek, Ee Wen (2018) Raspberry Pi-Based Finger Vein Recognition System Using PCANet. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Siow, Shien Loong (2018) Realization Of The 1D Local Binary Pattern (LBP) Algorithm In Raspberry Pi For Iris Classification Using K-NN Classifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chen, Kok Keat (2018) Real-Time Face Detection And Tracking Using Software And Hardware Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Murugaiah, Puovin (2018) Rogowski Coil Sensor For Partial Discharge Detection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Saidin, Muhammad Amirul Asyraf (2018) Sliding Mode Observer Design For Sensor Fault Diagnostic Of A Mechatronics System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Tan, Jing Hung (2018) Smart Public Transport System With Route Optimization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Lee, Soon Chong (2018) Smart Waste Management System With Internet Of Things. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Leow, Yoong Yang (2018) State-Of-Health Prediction Integrated With State-Of-Charge Monitoring Of A Lithium-Ion Battery Cell For Lifetime Prediction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Teo, Shun Yang (2018) Three-Wheel Table Tennis Ball Throwing Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Unpublished)

Ab Razak, Abdul Rauf (2018) Wireless Ear-EEG Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Kaliappan, Thayasree (2018) A Study On The Fast Pyrolysis Of Jackfruit Peel To Bio-Oil In A Drop-Type Fixed Bed Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Ramli, Mohamad Razif (2018) Activated Carbon Adsorbent From Jengkol Peel For Dye Removal Equilibrium, Kinetic And Thermodynamic Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Wei Ling (2018) Adsorption Of Acid Violet 7 Dye Using RHA/CFA Sorbent : Modelling, Process Analysis And Optimization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ahmad Rasidi, Ahmad Arif Aiman (2018) Adsorption Of Basic Dye (Methylene Blue) On Corn Cob Based Activated Carbon (CCAC) : Equilibrium, Kinetic And Thermodynamic Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abdul Rahman, Nawal Auni (2018) Adsorption Of Methyl Violet From Aqueous Solution By Using Activated Carbon From Mangrove Timber Via Physiochemical Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Zhi Heng (2018) Adsorption Of Methylene Blue Dye From Liquid Phase By Carbon Nanotube-Infused Poly (VINYL) Alcohol Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Alias, Jahira (2018) Adsorption Of Methylene Blue Using Chitosan Membrane Embedded With Multi-Walled Carbon Nanotubes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Perumal, Suthasheny (2018) An Interactive Learning Of Process Control Through Simulation Of Heat Exchanger Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teng, Xiau Jeong (2018) Bio-Diesel Production Using Homogeneous Catalyst : Product Yield Optimization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kananiasan, Gopal (2018) Biosynthesis Of Silver Nanoparticles Using Cassava Leaves Aqueous Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Jantan, Nurul Haznie Khussna (2018) Blending Of Alkanolamines Effect Towards Acid Gas Removal In A Post-Combustion Carbon Capture Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Unpublished)

Asrafa, Mohamad Fikri (2018) Calcium Carbonate Removal Via Direct Contact Membrane Distillation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chan, Zi Ying (2018) Capability Of Chromophores - Cellulose Acetatechitosan Membrane Based Colorimetric Sensor For Heavy Metal Detection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohamed Rosli, Ahmad Zaki (2018) Catalytic Sonolysis Of Used Motor Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkifli, Muhammad Azwar Hafify (2018) Clustering Of Polyelectrolyte Coated Magnetic Nanoparticles Under Repetitive Cycle Of Magnetization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Che Yusuf, Fakhira Huda (2018) Comparative Performance Of Natural Coagulants For The Treatment Of Fish Farm Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yiauw, Diing Ye (2018) Correlating The Synthesis Protocol And Properties Of Polyimide Film For CO2 Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ong, Hoay Yee (2018) Degradation Of Methylene Blue Using Molecularly Imprinted Iron (III) Oxide Prepared Via Hydrothermal Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Harith, Noor Nadhirah (2018) Deposition Of Nylon Membrane On Carbon Electrode For The Development Of Ascorbic Acid Electrochemical Biosensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Md Yusof, Mohamad Muhaimin (2018) Development Of Interactive Learning Simulator For Process Control Using Matlab/Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yaacob, Rosmaliza Zuraida (2018) Dynamic Adsorption And Regeneration Studies Of Acid Yellow 17 Using Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Guru Balan, Lavanyha (2018) Dynamic Adsorption And Regeneration Studies Of Acid Yellow 17 Using Modified Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Razak, Muhammad Hanafi (2018) Effect Of Air Gap Distance On The Structure, Characteristic And Performance Of PES/PVP And PES/PVP/ZnO Hollow Fiber Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abdul Aziz, Nurul Izzati (2018) Effect Of Different Lights Used On Green Amaranthus Growth. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hindwan, Hairiady (2018) Effect Of Nitrite and pH On The Accumulation Of Polyhydroxyalkanoates (PHAs). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ahmad, Nur Husni (2018) Effect Of pH On Tungsten Removal From Chemical Mechanical Polishing (CMP) Slurry Using Dowex Marathon C Resin Of Ion Exchange. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Muhamad, Aisyah (2018) Effect Of Various Cleaning Agent On Microfiltration Membrane Fouled By Oil Emulsion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Shadan, Aidil Faizie (2018) Effects Of Starvation On Anammox Process And Bacteria. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Asri, Nur Allia (2018) Evaluation Of Pandanus Amaryllfolius Leaves Extract As Eco-Friendly Corrosion Inhibitor Of Mild Steel In Hydrchloric Acid Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sharon Ding, Tiew Kui (2018) Feature Selection And Model Prediction Of Air Quality Using PM2.5. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sezale, Nur Syahirah (2018) Immobilization Of β-Galactosidase Onto Activated Chitosan Support By Using Covalent Binding Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azeman, Nursyarinie Nabihah (2018) Immobilization Of Lipase From Candida Rugosa Using Alginate Bead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Omar Saifuddin, Nurul Athira (2018) Indirect Carbonation Of Coal Fly Ash For Carbon Dioxide Captured Via Mechanochemical Reaction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rakavan, Kisheelah (2018) Inhibitive Action Of Moringa Oleifera Seed Pod Extract For The Corrosion Of Aluminium In 1.0 M Hydrochloric Acid (HCL) Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chew, Jian Yee (2018) Iron-Modified Composite Adsorbent Coating For Acid Red 1 Removal And Its Regeneration Feasibility By Heterogeneous Fenton-Like Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

James Gunam, Joanna Jayamalar (2018) Jackfruit Seed Based Activated Carbon Prepared By Microwave Heating Activation For Methylene Blue Dye Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ong, Yi Qian (2018) Magnetophoresis Induced Hydrodynamic Flow Of Non-Newtonian Fluid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kandasamy, Vinodini (2018) Maximizing Light Petroleum Gases (LPG) Yield From Atmospheric Distiller Of Crude Oil Distillation Using Response Surface Methodology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Wern Ke (2018) Maximizing Purity And Recovery Of Carbon Dioxide From Biogas By Equalized Pressure Swing Adsorption Using UiO66 Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Low, Pui San (2018) Modeling And Simulation Of Reactive Distillation Column For The Production Of Dimethyl Carbonate (DMC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chan, Hui Yee (2018) Modeling And Simulation Of Reactive Distillation Column For The Production Of Methyltertiary Butyl Ether (MTBE) Incorporating Structured Or Random Packing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sugumaran, Jayasree (2018) Morphology And Performance Evaluation Of Polyethersulfone/Zinc Oxide (PES/ZnO) Mixed Matrix Membrane Fabricated Using Non Solvent Additive. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Aizadshah, Fatima Zahara (2018) Nitrate And Phosphorus Removal From Synthetic Water And Their Coupling Effect Using Nanofiltration Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kunalan, Melvin Raj (2018) Oil Emulsion Separation Using Forward Osmosis And Its Performance Evaluation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Remlee, Mohd Ridzwan (2018) On 2,6,6-Trimethylcyclohex-2-Ene-1,4-Dione Biotransformation Beyond The Stationary Phase Of Baker’s Yeast Type III. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Othman, Siti Umiyah (2018) On The 2,6,6 – Trimethylcyclohex-2-Ene 1,4-Dione Biotransformation Beyond The Exponential Phase Of Baker’s Yeast Type-Ii Growth Curve. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Razif, Illya Syafiqah (2018) On The Whole-Cell Cell Saccharomyces Cerevisiae Biotransformation Of Ketoisophorone At Different Substrate Concentrations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Gobi, Shanthini (2018) Optimizing Purity And Recovery Of Hydrogen From Syngas By Equalized PSA Using Palm Kernel Shell Activated Carbon Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Bakhtiar, Muhammad Ridhwaan (2018) Parameters That Effect The Antioxidant Profile And Phenolic Compound From Centella Asiatica Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Vengadesan, Dharishaan (2018) Pattern Recognition Using Clustering Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kalidas, Saravanan Reddy (2018) PH Driven Encapsulation Of Curcumin In Self-Assembled Niosome Curcuminoid Physical Characterizations, Encapsulation Efficiency & Stability Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Md Isa, Abdul Aziz (2018) Photocatalytic Degradation Of Methylene Blue By Using WO3/g-C3N4 Catalyst Under Visible Light. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Engku Yunus, Engku Mohamad Hafzanurudin (2018) Photodegradation Of Methylene Blue Using Copper Oxide Prepared By Hydrothermal Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajantrakumar, Navin Kumar (2018) Phytoremediation Of Fish Farm Wastewater Incorporating Physical Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Muhd Aqram Zaki, Manzur (2018) Polyacrylamide/Polyethyleneimine-Bottom Fly Ash Polymer Gel For Water Shut-Off In Oil Wells. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Won Huei (2018) Polysulfone (PSF)/Silicoaluminophosphate (SAPO-34) Membrane Incorporated With 1-Ethyl-3 Methylimidazoliumbis (TRIFLUOROMETHYSULFONYL) Imide [EMIM][TF2N] For Carbon Dioxide Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajendren, Munesh Daniel (2018) Polyvinylidene Fluoride/Multiwalled Carbon Nanotubes Membrane For Methylene Blue Dye Removal Via Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Md Poad, Siti Mariam (2018) Post-Combustion Carbon Dioxide Capture By Porous Carbon From Cassava Leaves In A Fixed-Bed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abd Razak, Muhammad Nur Ramadhan (2018) Preparation And Characterization Of LSCF-CuO Using Solid State Method As Cathode Material For Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nagarajah, Mohaaneesh (2018) Preparation And Characterization Of Superhydrophobic Membrane For Desalination Using Direct Contact Membrane Distillation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sandrasegaran, Navenprasath (2018) Preparation Of Activated Carbon From Bamboo Stem Using Microwave Irradiation For Methylene Blue Dye Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd, Nurul Syazliza (2018) Preparation Of Nitrogen Containing Hydrochar By Hydrothermal Carbonization Of Water Spinach And Soy Bean Sprout Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Elysia Chiang, Chern Yuen (2018) Process Modelling And Control Of Isoamyl Acetate Synthesis In Microreactor Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teng, Siong Lim (2018) Production Of Bio-Oil Via Catalytic And Non-Catalytic Hydrothermal Liquefaction Of Spirulina. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sangaran, Sathiswaran (2018) Production Of Isoamyl Acetate With Candida Antarctica Lipase B (CALB) As Enzyme In A Solvent-Free System Using Miniaturised Intensified Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Mahzan, Muhammad Imran Afifi (2018) Pyrolysis Kinetics Of Biomass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kok, Joe Ye (2018) Removal Of Methylene Blue In Textile Industry Using Activated Carbon From Mangrove Pile Leftover Via Chemical Activation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Syed Sulaiman, Syed Hussaini (2018) Simulation And Optimization Of Ethylene Glycol Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rozman, Anis Salwani (2018) Simulation Of Sulfur Trioxide Production In An Adiabatic Multistage Catalytic Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sahul Hamid, Nur Fauzana (2018) Study Of Adsorption Of Acid Violet 7 Dye Using Magnetic Adsorbent Prepared From Onion Peel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mathivanan, Vinessa (2018) Study On Hydrolysis Of Polyvinyl Acetate To Polyvinyl Alcohol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Pei Chin (2018) Study On The Formation Of Granular Algae. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Nordin, Nazatul Shima (2018) Synthesis Of Microwave-Assisted Coconut Shell Based Activated Carbon For Removal Of Methylene Blue Dye From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mohd Romli, Muliati (2018) The Immobilization Of Candida Rugosa Lipase On The Chitosan Beads. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkifli, Muhammad Akmal (2018) Treatment Of Rhodamine B And Acid Red 18 By Electrocoagulation Using Iron Electrode. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Shamshuddin Jaya, Haslina (2018) Tungsten Removal From Chemical Mechanical Polishing (CMP) Spent Slurry Using Dowex Monosphere MR-450 Ultrapure Water (UPW) Resin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abdul Rahim, Nur Adibah (2018) A Single Unit Concept And Design Of A High Maneuverability Mobile Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Han Wei (2018) Analysis Of The Ultrasonic Cautery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ho, Zhe Wei (2018) Classification Analysis Of The Badminton Five Directional Lunges. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Hsueh Chung (2018) Classification Of Eggshell Translucent Areas For Quality Determination Using Alexnet. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tarmizi, Illma Laili Yasmin (2018) Design And Fabrication Of Semi-Auto Wafer Scriber For 4-In And 8-In Wafers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Chin Keng (2018) Design And Fabrication Of Spin Coating System For 8-Inch Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Khiew, Fook Yun (2018) Development Of Decision Support System For Scheduling Machine Loading By Using Microsoft Office. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Chee Haw (2018) Development Of Linkage Mechansim For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Sobri, Ammar Solehi (2018) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig Humidity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Rafdzi, Muhammad Farid (2018) Influence Of Material Properties On The Aperture Filling During Stencil Printing Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Malek, Noor Atikah (2018) Investigation On Hybrid Geometric Modelling Construction For Injection Mould Using CAD System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Roslaili, Muhamad Zulhilmi (2018) One Way FSI Study Of The Stress And Strain Distribution On The Water Dam Spillway Stilling Basin Baffles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Norisam, Norsofea (2018) Precision Hole-Making On Composite Panel-Effect To Productivity And Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mak, Kam Sheng (2018) Simulation Of Preventive Maintenance Schedule In Reducing Machine Stoppage And Downtime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yap, Pooi Yee (2018) Study On Various Adhesion Mechanism For A Wall Climbing Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razali, Muhammad Safuan (2018) Thermoelectric Power System From A Liquid-Fueled Combustor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Alaudin, Nur Asleena (2018) Self Assembly Gold Nanoparticles Modified Electrode For The Electrochemical Detection Of Mercury And Lead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Yeoh, Sze Chee (2018) Vibration Attenuation On Vacuum Cleaner By Rubber Mount. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Siew, Tuck Seong (2018) Fabrication of polysiloxane based stretchable ink filled with silver nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zailan, Masezatti (2018) Prediction of pm10 concentration using multiple linear regression and support vector machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Musa, Nur Syazana Mohd (2018) Knowledge, attitude and practice on food safety and hygiene among street food vendors in Kota Bharu, Kelantan. Other. Pusat Pengajian Sains Kesihatan. (Submitted)

Abd Halim, Mohd Hafiz (2018) Compact Planar Hybrid Ring Coupler With Embedded Meander Line. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chu, Chia Shin (2018) Fabrication Of Ti-40Nb-10HA Composite And Ti-40Nb Alloy With Surface Nanotubes For Implant Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahim, Ainul Afeeqah Athirah (2018) Manganese Removal In Groundwater Treatment Using High Grade Limestone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammad Musa, Mohammad Taufiq Haiqal (2018) Design And Fabrication Of Shape Memory Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Koay, Tze Yen (2018) Effect Of Cryogenic Treatment Prior To Equal Channel Angular Press (ECAP) Of Sac Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Amir, Esmanizam Esmaly Eusainy (2018) Effects Of Hydrolysis Using Various Parameter For Recovery Of Reducing Sugar From Local Coconut Dregs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Johary, Muhammad Danial (2018) Impact Of Pour Point Depressant Enhanced With Graphene Oxide On Thermal And Microstructure Properties Of Simulated Crude Oil Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Faizul Hilma, Muhamad Nabil (2018) Preparation And Characterization Of Cnt/Epoxy Nanocomposites Using Colloidal Polymerization Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Johari, Nurrahman (2018) The Analysis Of Particle Size Distribution (PSD) After Blasting Using Aerial Photography At Fys Marketing Sdn. Bhd., Bukit Mertajam, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Syed Anwar Idid, Syed Mohd Syafiq Idid (2018) The Extraction Of Tin And Copper From Roasted Copper Dross (RCD) And Copper Dross (CD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Jafri, Muhammad Nabil Asyraf (2018) Analysis Of Artificial Signals Of CPS, Spark Timing, And Fuel Injection Timing Toward The Engine Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Law, Khuan Foo (2018) Measurement Of Engagement And Cortical Reorganization In Brains Of Stroke Patients Via Electroencephalography (EEG) As A Result Of Visual Feedback Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Jen Nyap (2018) Simulation Of Active Force Control Using Intelligent Methods To Reduce Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wan, Dun Ye (2018) Study Of Engine Performance And Emissions Characteristics Of A SI Engine Fueled With Different Octane Rating Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chua, Khai Shen (2018) The Application Of The DMAIC Techniques For Business Performances Case Study For Open Defect Of Single-Sided Flexible Circuit Board. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Nur Amirah (2018) Thermoforming Process Simulation Of Stretchable Electronic Circuit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Aaron Ting, Zai Chiun (2018) Development Of Fuel Consumption Map Of A Myvi Engine Running On A Mixture Of RON 95 And RON 97 Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yeap, Yi Ling (2018) On The Electricity Demand In Relation To Rise Of Electric Vehicles In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Jing Xiang (2018) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Joshua Wong, Jia Yi (2018) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Mohd Azmi (2018) Effect Of Nozzle Rotation Angles And Sizes On Thermal Characteristic Of Swirl Anti-Icing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Johary, Muhammad Danial Mohd (2018) Impact Of Pour Point Depressant Enhanced With Graphene Oxide On Thermal And Microstructure Properties Of Simulated Crude Oil Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Kamarzaman, Fatin Farhana (2018) Removal Of Ammoniacal Nitrogen And Suspended Solids In Sewage Wastewater By Using Ferrous Sulfate In Coagulation Process Via Zeta Potential And Particles Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rakbi, Mohammad Firdaus (2018) Removal Of Phosphorus And Suspended Solids In Aquaculture Wastewater By Using Ferrous Sulphate In Coagulation Process Via Zeta Potential And Particle Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Razif, Muhammad Faiz Syazwan (2018) Removal Of Synthetic Methyl Orange DYE At Neutral pH BY NR-b-PVP/Ag Using Photodegradation Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Aidil Azami (2018) Study Of The Influence Of The Operational Parameters On The Removal Of Cod, Bod And Colour Of An Industrial Wastewater Treatment Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Halim, Muhammad Helmi (2018) Assessment Of Quarry Environmental Modeling Software Version 2.0 (QEMS V2.0) For Estimation Of Noise At Crusher Boundary. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Awang Kechik, Nur Aliah Hazirah (2018) Effect Of Blast Designs On Rock Fragmentation At Lafarge Kanthan Quarry, Chemor, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wan Mohd Amin, Wan Abdur Rahman (2018) Evaluation Of Silicone Sealant Cure Characteristics Using A Fabricated Parallel Plate Rheometer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rozailan, Nai'mah (2018) Fabrication And Characterization Of Denture Adhesive Filled Starches Containing Antimicrobial Agents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Karim, Amirul Aiman (2018) Grindability Of Fine Particle Gold Ore Using Vertical Stirred Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Parameswaran, Vengadesh (2018) Processing Of Tin From Pegmatite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siti Aina Najian, Muhammad Zuber (2018) The Effects Of Different Plasticizers (Triacetin And Triethyl Citrate) On Polyvinyl Alcohol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Boey, Keen Huang (2018) A Comparison Of The Different Algorithms For Essential Tremor And Parkinson’s Disease Tremor Differentiation Based On Hand Tremor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chik, Nur Aishah (2018) A Study Of Integrated CAD/CAM System With CNC Desktop Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Mei Kiem (2018) A Study On Mechanical Behaviour Of Lead-Free Solder Using Nanoindentation Test. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shamsudin, Siti Nor Atiqah (2018) A Study On Overall Equipment Effectiveness (OEE) For Performance Measurement Case Study For Surface Mount Technology (SMT) Department. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abd Aziz, Muhamad Syaiful Akmal (2018) Application Of Internet Of Things On Temperature Measuring System On Wafer Furnace Sintering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Md Isa, Mohamad Syazwan (2018) Application Of The Structural Dynamic Modification (SDM) Method To Reduce Noise And Vibration Of Vehicle Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

D'raj, Joshua (2018) Biomechanical Testing Of Hip Protectors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abd Rahman, Mohammad Fairuz (2018) Characteristics Study Of EFB Briquettes And Its Potential Use As Dual Fuel In CVCC. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ling, Siok Mei (2018) Computational And Experimental Study On Horizontal-Axis Wind Turbine Slotted Blade Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nazry, Farah Aisyah (2018) Computational Fluid Dynamics Of Urinary Catheterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ab Azid, Nor Azianti (2018) Conceptual Analysis Of Total Productive Maintenance (TPM) And Reliability Centered Maintenance (RCM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mustaffa Kamal, Muzhaffar (2018) Design And Development Of A Tensile Split Hopkinson Gas Gun. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Nurul Hakimi (2018) Design And Development Of Basic Teaching Modules For Open Source JaamSim Discrete Event Simulation Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Zikri (2018) Design And Fabrication Of A Projectionlithography Machine For The Application Of Microfluidic Pattern Using Commercially Available UV LED. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Shukor, Nurzayani Nabilah (2018) Design Innovation For Replica Trophy Using Reverse Engineering And CNC Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Aliff Danial (2018) Design Of Multi-Service Access Node (MSAN) Roadside Cabinet Battery Compartment Lock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Sin Joo (2018) Developing Android Application To Guide Lean Six Sigma PDCA Project. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Yan Xu (2018) Developing Flow In Microchannel Having Regular Microstructure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azman, Amirul Azim (2018) Development And Characterization Of Biomass Steam Boiler For Externally Fired Micro Gas Turbine (EFMGT) System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusri, Muhammed Aqel (2018) Development And Performance Characteristics Of A Swirl Combustor Operating On VCO-Blended Fuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamzah, Muhammad Al Amien (2018) Development Of A Meso-Scale Combustor For Liquid Fuel Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Wai Yee (2018) Development Of A New Method To Measure The Creep Behavior Of Rubber With The Addition Of Bentonite Based On Scanner-Based Image Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kathirvelu, Vemal (2018) Development Of Apps For Predictive Maintenance System A Case Study In HP. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Peh, Ching Guan (2018) Development Of Electronically Controlled Common Rail Fuel Injection System And Optimization Of Injector Parameters In Single Cylinder Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nur Zawani Syifaa, Mohd Muzaini (2018) Dewatering Method For Food And Kitchen Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhammad Rafiq, Mohammad Sabri (2018) Effect Of Temperature On Flexible Printed Circuit Board During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkurnain, Amru (2018) Effect Of Thermal Energy On The Filling Time Of Composite Encapsulant Underfilling Process With Various Filler Loading Of Nano Silica Filler Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Akashah, Akmal Rafiq (2018) Effectiveness Of Variable Stent Designs For Treatment Of Renal Artery Aneurysm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sani, Muhammad Qayum (2018) Effects Of Octane Rating Of Commercially Available Gasoline Fuel On Engine Performance, Emissions And Combustion Characteristic In Spark Ignition (SI) Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Mohamad Hanif (2018) Environmental Control For Catfish Drying House Using Raspberry PI Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Pauzi, Adha Fahmi (2018) Experimental Of Tailor Welded Blanks Fabricated Using Friction Stir Welding (FSW). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sahrudin, Intan Norshalina (2018) Experimental On Sulfur Reduction Process For Waste Product And Biodiesel Fuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Leslie Kneoh, Yen Sing (2018) Feedback Control Of Inverted Pendulum Using Raspberry Pi Microcontroller And Arduino UNO. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kang, Jing Yong (2018) Foot Orthosis For Patients With Diabetic Foot Ulcer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Nurul Aqilah (2018) Gasoline Quality Monitoring Via Vehicle OBD Data Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sahar, Nurhamizah (2018) Heat Transfer In Staggered Oblique Fin Microchannels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad, Nurnadia Azwa (2018) Investigation On The Effect Of Dry Turning On AISI 305 Steel With Ceramic Inserts By Analysis Of Workpiece Surface Profile. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tang, Jau Hoong (2018) Knowledge Discovery Of Noise Level In Lecture Rooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Li Zi (2018) Lean Six Sigma Game App For Android. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zafrullah, Muhammad Naseeruddin (2018) Low-Cost Retrofit Hybrid System For Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Arbain, Azizi (2018) Measurement And Management Of Energy Usage In School Of Mechanical Engineering USM. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tong, Wen Le (2018) Mechanical Evaluation Of Locking Compression Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ramli, Mohd Akmal (2018) Mems In Control Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yap, Eng Sam (2018) Mixing In Microchannel Patterned With Superhydrophobic Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajasagaran, Kogulan (2018) Noise And Vibration Study Of Commercial Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Aziz, Asyraf Hasif (2018) Numerical Analysis Of Ultra-Fine Package Assembly With SAC305-TiO2 Nano-Reinforced Lead Free Solder At Different Peak Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razak, Muhammad Ariff Solehin (2018) Numerical Study Of The In-Cylinder Air Flow Characteristic Generated By GVD For Air-Fuel Mixing Improvement Using Emulsified Biofuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Azam, Muhammad Azfar Razin (2018) On The Performance Of The Motorcycle Engine Using Filtered Recycle Lubricant Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kai Li, Gwee (2018) Optimization Of Lighting Parameters For Edible Bird's Nest Vision Inspection System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kee, Tze Shen (2018) Optimizing 3D Printing Parameters For Best Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Han Peng (2018) Parallel And Series Electric Hybrid Vehicle Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Muhammad Hisyamuddin (2018) Parallel Solvers Using PETSc For Nonlinear Conduction Problems In Higher Dimensions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Poo, Chee Shen (2018) Performance Characteristic Of Single Stage Micro Gas Turbine (MGT) Running On Liquid Biofuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Ching Hock (2018) Performance Characteristics Of Car Alternator Coupled Directly To Micro Gas Turbine (MGT). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chin, Han Chuan (2018) Performance Of A Hydraulic Ram Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamed, Muhammad Aizuddin (2018) Research Of Screw Expeller On Oil Palm Seed: A CFD Study On Barrel Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Nazri (2018) Sound Absorption Study Of Three-Dimensional Printed Micro-Perforated Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ilias, Muhammad Ikmal (2018) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azmi, Amirul Asraf (2018) Supply Chain Management And Performance At Case Study Company. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chia, Yong Ham (2018) The Effect Of Various Carbonization Temperature And Duration On The Food Using Microwave Food Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhamad Yusli, Siti Rosyada (2018) The Numerical Comparison Study On The Effect Of The Anti-Icing Methods On Thermal Stress Distribution Of Nacelle Lip-Skin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zainal Abiden, Zabeer Abhar (2018) The Performance Of Steam Engine System With Retrofitted Reciprocating Engines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Fadzil, Mohammad Azhar (2018) The Study Of Physiochemical Properties And Spraying Characteristics Of Hybrid Biofuel For Compression Ignition (CI) Engine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Hanifah, Mohamad Farhan (2018) The Study Of Vibration Motion Of Honey Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Adnan, Muhammad Aimi (2018) The Use Of Response Surface Methodology (RSM) To Optimize The Twist Drill Geometry In Single Shot Drilling Of Stacked Alumina-Carbon Composite Layer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azreezul, Azrul Zhafran (2018) Time-Lapse Of Plant Movement Classification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhammad Shafeeq, Abdul Hannan (2018) Two-Dimensional Fatigue Crack Growth Analysis Using Extended Finite Element Method (XFEM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chang, Fan Ru (2018) Water And Salt Water Absorption, Hygrothermal And Tribological Propertires Of Nickel Zinc Ferrite Magnetorheological Elastomers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Illuni Islamiah (2018) Wear And Friction On Gimbal Sealant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Iswady, Fateen Adibah (2018) Wear And Friction On Loaded Conveyor Belt. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lau, Dick Mun (2018) Developing Mobile Application For Generic Human-Machine Communication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Muhammad Anwar (2018) Very High Frequency Distilled Water Antenna. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Mustaffa, Khairul Mohd Fadzli (2018) A study of inhibition and reversal of plasmodium falciparum cytoadherence using RNA apatamer specific to ICAM-1 /CD54 and CD36 protein. Project Report. Pusat Pengajian Sains Perubatan, Universiti Sains Malaysia. (Submitted)

Noor, Nursyazatul Eylia Mohd (2017) Space Mission Characterization And Analysis For University Cubesat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Rozani, Mohd Afifi (2017) Bioactive Glass Reinforced Polyurethane Scaffolds- Effect Of Pu Solution Concentration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Khadri, Nurmaliana Mohd (2017) Brazilian Test On Mechanical Behaviors Of Anisotropic Rocks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Marahat, Muhammad Hanif (2017) Characterization And Wettability Of Superhydrophobic Filled Plasticized Polyvinyl Chloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ong, Guat Ling (2017) Comparative Study Of Nanoporous Carbon Converted From Waste Tyre Char & Mesocarp Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Anuar, Azila (2017) Comparison Of Silane Treatment Methods On Filler Reinforcement In Rubber Composties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Aziz, Muhammad Syamim Che (2017) Correlation Of Peak Particle Velocity During Blasting And Particle Size Distribution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Basirum, Muhammad Azli Azam (2017) Cycle Time Optimization On Imerys Using Talpac. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Aminuddin, Emirol Amri (2017) Determination Of Strength And Deformability Of Fractured Rock Mass By Finite Elemental Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Teh, Jin Jian (2017) Development Of Bismuth Nanoparticles For Lead And Cadmium Sensors Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Noor, Muhammad Syazwan Mohd (2017) Development Of Co-Sr Carbonated Hydroxyapatite For Biomedical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Sobberi, Wan Nuraimi Athirah Wan (2017) Development Of High Reflectance Glaze. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Yusof, Mohd Shafiq Mohd (2017) Effect Of Operating Parameters In Stirred Mill For Filler Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Roslly, Nurul Amira Izzatie (2017) Effect Of Poly-Ethylene-Co-Methyl Acrylate-Coglycidyl Methacrylate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Abidin, Muhamad Firdaus Zainal (2017) Effect Of Salt Concentration On Morphology And Mechanical Properties Of Polyurethane-Bioglass Composite Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Salim, Zaihan Azarina (2017) Effect Of Various Materials Selection On Physical And Mechanical Properties Of Tire Tread. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Kamal, Nurul Farihah (2017) Effects Of Acrylonitrile-Butadiene Latex Powder On The Impact And Thermal Properties Of Poly(Lactic Acid). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ramlee, Nor Azmira Salleh @ (2017) Electrochemical Ecthing Of Quenched Sac305 Solders. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Nazry, Muhamad Firdaus (2017) Emulsification of ethylene vinyl acetate (eva) for pour point depressant (ppd) applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Thai, Gar Lock (2017) Fabrication And Characterization Of Uv-Crosslinked Pdms Hydrogel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Hamisan, Fairuz (2017) Fabrication Of Porcelain Grinding Media Made Of Locally Processed Clay. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Hafiz, _Nurul Asyiqin Abd Halim (2017) Fabrication Of Porous Β-Tricalcium Phosphate Granules Cements By Using Β-Tricalcium Phosphate Granules As Starting Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Sabri, Zufarina Aqila Lukman (2017) Fabrication of strain sensor based on silver conductive ink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Yasir, Widad Shahira (2017) Finite Volume Simulation Of Flow Of Polymer In An Extrusion Die. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Sharipudin, Mohamad Nazmie Mohd (2017) Formation Of Iron Oxides Under Varying Condition Of Ph, Temperature And Neutralization Dosage. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ramlan, Siti Nur Asifa (2017) Geochemical And Mineralogical Characteristics Of Selinsing Gold Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Anwar, Muhammad Harith Irfan Khairul (2017) Hydro-Electrometallurgical Extraction Of Zinc From Zinc Bearing Wastes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Endut, Noor Suhaiza Che (2017) Investigation Of Submicron Particles Incorporate In Silane To Improve Hydrophobicity With The Potential Application In Batik Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zainordin, Atif Sadaqi (2017) Kinetic Modelling Of The Formation Of Titanium Hydride From The Reaction Between Magnesium Hydride And Titanium Tetrachloride Using Matlab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zulkifli, Nur Amiera (2017) Microstructure Evolution Of Isothermally Aged Ecaped Sac Solder Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Maturidi, Nurul Ain Abu Mansor (2017) Mold Filling Simulation For Injection Molding Of Natural Rubber Compound In Glove Fabrication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rohazam, Nurul Zulaikha (2017) Morphological Investigation Of Precipitated Calcium Carbonate (PCC) Characteristics With The Presence Of Additives During Synthesis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Yahaya, Syahidah Suhaili (2017) Multi-Doping Of Mg-Co Substituted Carbonated Hydroxyapatite For Biomedical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Aziz, Siti Nazalinda Abdul (2017) Potential Commercial Evaluation Of Kaolin Clay Deposit From Different Origin And Genesis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Khalid, Akmal Hakim (2017) Prediction Of Blast-Induced Ground Vibration During Blasting At Batu Tiga Quarry Masai. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Juhari_, Muhammad Syahir (2017) Preliminary Study On The Fabrication And Characterization Of Lightweight Porcelain Tiles Via Tri-Layer Pressing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rozaly, Muhammad Rushaidi Mohd (2017) Preparation Of Kuantan Bauxite For Rare Earth Elements Extraction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Mohamad, Mohd Hafizi (2017) Properties Of Multi-Walled Carbon Nanotubes-Woven Kenaf-Woven Glass Reinforced Epoxy Laminated Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Tamezer, Abdul Halim Mohd (2017) Properties Of Organosilica Encapsulated Dye For Bioimaging Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

William, Ng Kar Hong (2017) Refinement Of Apatite Ceramic Produced From Waste Dental Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rozali, Muhammad Ridhwan (2017) Synthesis Of Porous Carbonate Apatite-Gelatine Scaffolds Via Freeze Drying Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Bahrin, Muhamad Dzulnawarin Kamal (2017) Synthesis Of Silicon Nanowires By Carbothermal Evaporation Method Using Metal Catalyst. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Lim, Chun Ming (2017) The Corrosion Performance Of Coupled Zinc Anode-Mild Steel Attachment Methods In Malaysian Seawater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Fauzi, Muhamad Hazman Ahmad (2017) The effect of carbamide particles size on morphology and compressive properties foam based magnesium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zakaria, Nur Asyiqin (2017) The Performance Of Coupled Mild Steel-Zinc Sacrificial Anode In Simulating Marine Fouling Environment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Sarvvin, T.Kalithas (2017) Modelling And Simulation Of Large Signal And Power Delivery Networks On Ic And Pcb. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Maidin, Mohammad Amiruddin Mohd. (2017) Characteristic Study Of Physiochemical Properties Of Hybrid Biofuel (Palm Oil And Alcohol Blend) For Compression Ignition Engine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sabri, Zufarina Aqila Lukman (2017) Fabrication of strain sensor based on silver conductive ink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rahmat, Nur Syahirah (2017) Nephelium Lappaceum Seed As Natural Coagulant Flocculant For Landfill Leachate Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ruslan, Muhammad Nadzmi (2017) Characterization And Pretreatment For Silica Sand In Removing The Associated Mineral. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

William, Yeap Keat Seong (2017) Partial Binary Tree Network (PBTN)- A New Dynamic Element Matching (DEM) approach for Digital Analog Converter (DAC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Koh, Wei Chong (2017) A Study On Deterioration- The Effect Of Altitude And Bio-Jet Fuel On Turbofan Engine Performance. Project Report. Universiti Sains Malaysia. (Submitted)

Osman, Muhammad Aizuddin (2017) Design And Development Of Glider Launcher. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Chew, Tian Feng (2017) Evaluation Of Dual Colours Illumination For Particle Image Velocimetry Measurement. Project Report. Universiti Sains Malaysia. (Submitted)

Liang, Yeng Fei (2017) Development Of Wind Turbine Blades Based On Hybrid Bio-Composites. Project Report. Universiti Sains Malaysia. (Submitted)

Ishak, Nurul Hidayah (2017) Development Of A Remotely Piloted Airship System For Monitoring And Tracking Wildlife In The Woodland. Project Report. Universiti Sains Malaysia. (Submitted)

Azhar, Nur Zhafirah (2017) Development Of The Adjustable Engine Mount For The Ultra-Light Helicopter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Pang, Chin Wee (2017) Development Of Crash Resistance Car Bumpers Based On Bio-Composites And Hybrids. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ali, Muhammad Afizzi Mohd (2017) Development of monitoring unit for drill bit visual inspection using digital microscope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zain, Mohammad Shair Mohd (2017) Development Of A Control Flap For The Ultralight Helicopter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ujang, Nor Faridah Hanim Aziz (2017) Design And Development Of A Long Range Glider. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Kong, Joon Kit (2017) Develop A Long Range Drone For Wildlife Monitoring By Using Charging And Battery Replacement Pod Module. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Sariman, Nur Ika Farhana (2017) Determining Helicopter Blade Length Per Airworthiness Strength Requirement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Afzan, Tengku Muhammad Faris Tengku (2017) Commissioning Of The Ground Control Station For HAB System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Enso, Ennelyn Novema (2017) Aerodynamics Study Of Tubercle Effect On NACA4412 Airfoil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Teoh, Len Choon (2017) Investigation And Performance Optimization Of Propulsion System For An Indoor Plane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ong, Chor Keat (2017) Kernerlized Correlation Filters Parameters Optimization For Enhanced Visual Tracking. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Azlan, Nurul Aqmal Syuhaida (2017) Modal Analysis Of UAV Aircraft Structures With Different Tail Configurations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Rizal, Nur Awatiff Mohamad (2017) Modelling of ionosphere behaviour prior to large earthquakes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Joanne, Lim Zi Fen (2017) Nasal Airflow Simulation Of Patient With Septal Deviation And Allergy Rhinitis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zainul, Abdul Rahman (2017) Post-Fire Compression Properties Of Sandwich Composite Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Alias, Faiz Azizi Che (2017) Investigation And Design Optimization Of An Indoor Plane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Foo, Kar Yen (2017) Studies On Laminar And Turbulent Reynolds Number For Standardized Nasal Cavity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Azhar, Nur Hafizah Kamal (2017) Study on newly developed drill bit monitoring system for composite assembly in aerospace industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ishak, Nurul Atiqah (2017) Tensile properties of composite laminates due to fuel attack. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tong, Chee Kent (2017) Unsteady Pressure Measurement Of NACA 0018 Undergoing Pure Pitching Motion At Different Pitch Amplitudes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Faudzi, Siti Multazimah Mohamad (2017) 2D Simulation Of Sultan Abu Bakar Dam Release Using HEC-RAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mudzrab, Fitri Mahamad (2017) A Study Of Building Automation System (Bas)- A Case Study At The School Of Civil Engineering, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yunus, Nurul Yasarah Mohd (2017) A Study On The Extent Of Pond Accumulation Influence On Roadss Hydroplaning Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Govindasamy, Darvintharen (2017) A Study On The Suitable Compaction Method For Physical Slope Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bukhori, Muhammad Azzim (2017) Activated Carbon, Limestone And Alginate As A Composite Adsorbent For River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ehsan, Nurul Syazwani Mohamad (2017) An Experimental Study Of Natural Frequency Of Damaged Cable Net Supported Facade Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Zhi Jia (2017) An Investigation On Construction Sequence Of Irregular Single Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Chin Jie (2017) Analysis And Simulation Of Pedestrian Walking Characteristic At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zauki, Wan Nadhira Shaqina Wan (2017) Analysis Of Walking Accessibility To Rapid Penang Bus Services (Route 303) In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Nur Fatin (2017) Analysis On Distraction While Driving- A Case Study On Staffs And Students Of Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Junit, Syarifah Nurhanani Syed (2017) Application Of Chitosan As A Natural Coagulant In Groundwater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sazali, Mohd Asnizam (2017) Aquifer Characterization And Groundwater Potential Evaluation In The Sedimentary Rock Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bashah, Siti Fatin Qhalilah Osman (2017) Assessment Of Damage Index For Reinforced Concrete Frames Subjected To Seismic Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tai, Joon Hong (2017) Assessment Of The Performance Loss And Repairabiity Of Earthquake Damaged Reinforced Concrete Buildings Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leong, Weng Woh (2017) Behaviour Of Selected Criteria Air Pollutants During High Particulate Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Yon Sheng (2017) Bending Behaviour Of Cold Formed Steel Structural Member With Perforated Section In House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Zafira Nur Ezzati (2017) Buckling Capacity Of Cold-Formed Steel Structure Column Member With Perforation Section In Affordable House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sin, Jing Yao (2017) Characterization And Behaviour Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Wastewater With The Presence Of Ferrous Sulphate And Polyaluminium Chloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Besenun, Nur Farah Shahirah (2017) Comparative Subsurface Characterization Of The Quaternary And Residual Sites In Northern Peninsular Malaysia By Cumulative SPT(N) For Assesing Concrete Pile Foundat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adha, Nor Amelia (2017) Cost Comparison Of Seismic Design For Reinforced Concrete Building Under Ranau Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khudria, Nur Atiqah Mohamad (2017) Degradation Of Dyes (Methylene Blue) Using Natural Rubber Incorporated With Silver Nanoparticles In Water Treatment Tank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kua, Chin Tong (2017) Determination Of Flood Load On Bridge Deck. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dinail, Nurul Juliyana (2017) Determination Of Mannings Coefficient For Modular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alexander, Yeo Ming Ming (2017) Development Of A Numerical Model For The Simulation Of Mudflow Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kasehyani, Nur Hanis (2017) Effect Of Corner On Evacuation Behaviour During Building Egress By Using Dem-Based Multi Agent Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Thai, Kim Sing (2017) Effect Of High Strength Concrete On Capacity Of Prestressed Beam For Bridge Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusof, Mohd Anuar Mohd (2017) Effect Of Plastering And Carbon Fibre Reinforced Polymer (CFRP) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Apilin, Nur Shuhada (2017) Effect Of Polypropylene Fiber On The Properties Of Mortar Containing Silica Fume. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Goh, Xiao Wen (2017) Effects Of Aging Condition, Preconditioned Temperature And Anti-Stripping Agent On The Adhesive And Cohesive Behaviour Of Asphalt Binder And Mastics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kam, Pui Kuan (2017) Effects Of Anti-Stripping Additives On The Moisture Sensitivity Of Asphalt Mixtures Subjected To Several Conditioning Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Mohammad Fikri (2017) Effects Of Plastering And Glass Fibre Reinforced Polymer (Gfrp) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Mei Ting (2017) Engineering Properties Of Warm Mix Asphalt Incorporating Fly Ash. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adenan, SSaidatul Husna Mohamed (2017) Experimental Investigation Of Pedestrian Flow Through A Corridor With Corner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Humayunkabir, Sheikh Hazwan (2017) Experimental Investigation On The Load Carrying Capacity Of Modified Purlin To Rafter Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Voon, Sze Nee (2017) Flexible Scheduling For Construction Project Using Fuzzy Logic Method And Critical Path Method (CPM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Halid, Nur Fatin Hanani Mohd (2017) Formation Of Trihalomethanes In Surface Water And Groundwater By Using Chlorine And Chlorine Dioxide As Disinfectant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gunasegar, Denesh (2017) Green Kerb – Green Technology Technique In The Development Of Alternatives Kerb Using Old Tire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Fatin Nur Ayuni Abd (2017) Ground improvement method using rubber shredded and acrylonitrile butadiene styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruddin, Muhamad Al-Amin (2017) Indoor Outdoor Relationship Of Fine Particles (PM2.5) IN School Classroom. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulkifly, Natasha Amiera Mohd (2017) Landfill Leachate Treatment Using Nano Composite Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Khairun Nizar Mohd Tajudin, Mohd Khairun Nizar Mohd (2017) Numerical Analysis Study Of Sarawak Barrage River Bed Erosion And Scouring By Using Smooth Particle Hydrodynamic (SPH). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamberi, Aqilah (2017) Numerical Investigation On The Strengthening Work Of Transmission Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Merzuki, Muhammad Yusof (2017) Odour Emission From Palm Oil Mill With Different Effluent Treatment System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yap, Han Yin (2017) Optimization Of Project Duration And Constraint Resource Using Monte Carlo Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zuraidi, Wan Muhammad Adib Wan (2017) Performance Of Actual And Laboratory Horizontal Roughing Filter For Turbidity And E.COLI Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teruna, Izzul Akmal (2017) Performance Of Composite Adsorbent In River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Hafizahizzati (2017) Prediction Of PM10 Concentration Using Multiple Linear Regression And Bayesian Model Averaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamid, Nur Haziqah Mohd (2017) Prediction Of PM10 Using Multiple Linear Regression And Boosted Regression Trees. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Nurul Jannah (2017) Probable Maximum Precipitation Estimation Using Statistical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akashah, Muhammad Amirul (2017) Productivity Of Construction Projects With Industrialized Building System (IBS) Technology Adoption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lani, Anuar Effendy Mat (2017) Radial Gate Hydraulic Modelling Of Sultan Abu Bakar DAM, Cameron Highland. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazir, Amni Umirah Mohamad (2017) Relative Humidity And Temperature Effect On Biological Contaminant At Public Access Building In Seberang Perai Selatan, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Paid, Norazilah Mohamed (2017) Reliability Of Rapid Penang Operation In Mixed Traffic Situation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nur Aisyah Farhanah (2017) Removal Of Iron And Manganese Using Ejectors And Roughing Filter Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wahab, Muhammad Fikri Abd (2017) Removal Of Solids, Total Coliform, E.Coli, Uv254, Colour And Turbidity Using Zeolite Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagendran, Sharan Kumar (2017) Rippability Assessment In Hilly Terrain Of Weathered Sedimentary Rock Mass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiffany, Ting Feng Nee (2017) Rural Area Development By Understanding Basic Infrastructure Needs Through Local Survey In Sibu, Sarawak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hassan, Nur Munira (2017) Seismic Analysis Of Irregular Reinforced Concrete Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aidy, Siti Hajar Noor (2017) Seismic Evaluation Of Low To Meduim Rise Of Regular Rc Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lau, Ji Wei (2017) Seismic Fragility Assessment Of Moment-Resisting Concrete Frame With Setback Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Kenth Zheng (2017) Shear Behaviour Of Perforated Cold-Formed Steel Section. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Taufik, Ruzainah Ahmad (2017) Spatial Analysis On Strong Winds Occurrence In The Northern Regionmalaysia Based On Interpolated Wind Speed And Wind Direction Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Nurul Atiqah (2017) Stress-Strain Response Of Full Scale Rubberized Reinforced Concrete Column Under Vertical Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Noradila (2017) Study Of GAP Acceptance For Yield-Controlled Left-Turning Lane At Signalised Intersections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Prakas, Kumaravelu (2017) Study On The Characteristic Of Marine Dredged Sediment At Lumut Using Admixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jin Sheng (2017) The Behaviour Of LNAPL In Sand Due To Fluctuating Groundwater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mah, Chia Ling (2017) The Behaviour Of LNAPL In Sand Due To Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nathan, Pavanithan (2017) The Effect Of Aggregate Types On The Performance Of Asphalt Mixture Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Puzi, Nurul Fathiha Mohd (2017) The Effect Of Location For On-Site Detention (OSD) On Peak Attenuation Using Stormwater Management Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Farouk, Mohamad Zulhilmi (2017) The Efficiency Of A Depressed Gully Inlet Of A Malaysian Drain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zakaria, Muhammad Norshazril Alif (2017) Thermal Comfort And Its Relation To Ventilation Approaches In Mosques. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagalinggam, Tanagaraj (2017) Treatment Of Palm Oil Mill Effluent Odour Using Biofilter From Compost And Wood Chips Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozi, Norainna Che (2017) Trihalomethanes Formation Potential In Groundwater And Surface Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kassim, Maimunah Abu (2017) Variability And Rainfall Against Slope Failure For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Nor Azlin Ali @ (2017) Verification Of CPTU Soil Types By USCS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yahaya, Muhammad Rasyidin (2017) A Secondary Current Distribution In A Zinc Electrowinning Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Mansor, Mohamad Amir Syafiq (2017) Acid Leaching Of Amang For Eventual Recovery Of Titanium Under Diffusion Limited System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Johari, Adliwafi (2017) Acid Mine Drainage Treatment With Zeolite And Red Gypsum At Tasik Puteri, Dungun, Terengganu. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Lim, Ze En (2017) An Investigation On The Coupled Gas-Solid Reactions Using Matlab- Nickel Oxide Reduction By Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ragunathan, Logatharan (2017) Analysis Of Rock Fragmentation By Using Powersieve Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Soo, Kuan Lim (2017) Characterization Of Lithium Vanadium Oxide Anode With Agar Binder In Aqueous Rechargeable Lithium Ion Batteries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Wai, Weng Sin (2017) Characterization, Delignification And Hydrolysis Of Malaysia Switchgrass For Sugar Extraction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Shahifulnaas, Muhammad Aiman (2017) Characterization, Delignification And Hydrolysis Of Malaysian Elephant Grass For The Recovery Of Sugar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Neo, En Pei (2017) Comparison Of Different Types Of Dispersing Agent On Mechanical Properties Of Natural Rubber Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ghazal, Mohammed Harith Mohammed (2017) Determining Extractive Contents Of Different Types Of. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Basirun, Rusella Ira Runella (2017) Determining The Settling Velocity Based On Size And Shape Of Gold Particle To Improve The Design Of Sluice Box. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rahim, Nuramizah Abdul (2017) Development And Verification Of Traffic Noise Estimation Using Quarry Environmental Modeling (Qem). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Khor, Yong Ling (2017) Development Of Tio2-Zno Photocatalyst Incorporated Lldpe For Antimicrobial Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Hamat, Nur Afiqah (2017) Drug Release Study Of PLA Microspheres Loaded With Gentamicin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Tan, Joo Kean (2017) Effect Of Adding Indium And Zinc Alloying Elements To Creep Behavior Of Sn-0.7cu Solder Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rodzali, Mohammad Aidil (2017) Effect Of Blast Design On Particle Breakage At Imerys Minerals Malaysia Sdn. Bhd. Simpang Pulai, Ipoh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Fun, Yan Chin (2017) Effect Of Calcium Concentration On The Microstructure And Dielectric Properties Of Ca-Doped Plszt (Pb-La-Sr-Zr-Ti) System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Cheah, Wei Kian (2017) Effect Of Deposition Temperature And Type Of Substrates On Structural, Surface Morphology And Optical Properties Of Rf Magnetron Sputtered Ccto Thin Film. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Teh, Ye Sam (2017) Effect Of Different Size Of Banana Fibers On The Mechanical And Thermal Properties Of Banana Fiber Filled Agar Fiberboard. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Chai, Poi Seng (2017) Effect Of Fiber Surface Treatment On Mechanical And Thermal Properties Of Polylactic Acid-Kenaf Fiber Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Loh, Wai Cheong (2017) Effect Of Kenaf To Glass Fiber Ratio On The Properties Of Hybrid Pultruded Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Lee, Angie (2017) Effect Of Leaching Agents On Polyurethane Composite Scaffolds Containing Bioactive Glass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rosli, Muhammad Syamil (2017) Effect Of Recycling On The Mechanical Properties Of Polylactic Acid (Pla)-Impact Modifier Blend. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Nor, Nurfadzlin Syakina Md (2017) Effective Acid Mine Drainage Treatment Using Natural Zeolite And Hydrated Lime (Pengkalan Hulu). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Chiew, Kuan Zheng (2017) Effects Of Sodium Dodecyl Sulfate Treated Halloysite Nanotube On The Properties Of Poly(Lactic Acid) Nanocomposites Film. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ramly, Farahdyana (2017) Estimation And Design Of Freshwater Fish Pond Using Low Temperature Geothermal Sources At Sungai Klah Hot Springs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Jouti, herylyn (2017) Evaluation Of Fish Waste As Starting Material For Producing Biodegradable Protein-Based Thermoplastic Polymers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Gan, Ivy (2017) Extraction Of Nanocellulose From Sugarcane Bagasse Using Different Acids And Its Effects On Poly(Lactic Acid). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Salleh, Syahira Amira Mohd (2017) Fabrication And Characterization Of Ph-Responsive Poly(Ethylene Glycol) Methyl Ether Methacrylates_Poly(Acrylic Acid) Hydrogel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ooi, Chia Ying (2017) Fabrication And Characterization Of Tri-Layer Lightweight Ceramic Tile. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Wahid, Amira Fitriyanie Abd (2017) Fabrication Of Conductive Ink Based On Graphene Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ong, Yee Chin (2017) Formation Of Hierarchical Porous Iron Oxide And Their Application In Reducing Cr(Vi). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rahman, Intan Nur Izati Abdul (2017) Formation Of Titania Nanotubes And Its Application In Reducing Cr(Vi). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Bakari, Maisarah Ahmad (2017) Geophysical 2d Self-Potentials And Earth Resistivity Survey Over Slope Stability Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Koe, Mei Yen (2017) Investigation Of Ni-Cu As Ohmic Contact On P-Type Gan_ Investigation Of Ni-Cu As Ohmic Contact On P-Type Gan_Investigation Of Ni-Cu As Ohmic Contact On P-Type Gan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Jong, Cheng Kiat (2017) Life Cycle Analysis Of Fish Products Emphasis On Fish Wastes As Raw Material For Bioplastics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Soo, Hui Fen (2017) Mechanical And Acoustic Properties Of Nonwoven Needle Punched Flax Fibre Mat- Acrodur Resin Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Roslan, Abdul Rahman (2017) Mechanical And Morphological Properties Of Polylactic Acid- Poly(Hydroxybutyrate-Cohydroxyhexanoate) Blends-Effect Of Blends Ratio And Maleated Compatibilizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Kudori, Siti Nurul Izzati (2017) Effect Of Different Ratio Natural Rubber- Butadiene Rubber, Carbon Black-Silica And Types Of Carbon Black On Physical Properties Of Tire Tread For Off Road Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Wong, Kae Yuan (2017) Mechanical Properties And In-Vitro Corrosion Behaviour Of Mg-6zn-Bioactive Glass Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Shariff, Fatin Asyhikin Mohd (2017) Meteorological Factor Using Statistical Analysis At Quarry Site. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Safri, Mohammad Hafizuddin Mohd (2017) Mineral Composition Analysis Of Malaysian Sulphide Gold Ore_Mineral Composition Analysis Of Malaysian Sulphide Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Muhammad, Ahmad Fakhrughazi (2017) Miscibility And Reinforcing Ability Of Allylic Monomers In Polystyrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Law, Yeong Shyang (2017) Polymer Melt Flow Progression In Confined Geometries And Its Connection With Product Reliability. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Tan, Peng Phin (2017) Porous Magnesium Using Polymethyl Methacrylate (Pmma) As A Space Holder For Biomedical Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Redzuan, Faiz Zuhairy (2017) Prediction Using Regression Model For Tensile Shear Strength Of Resistance Spot Welding 5052 Aluminium Alloy Using Full Factorial Design Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Leong, Siew Thung (2017) Preparation And Characterization Of Sugarcane Bagasse As Biodegradable Fillers On Natural Rubber Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Osman, Maizatul Akmaliah (2017) Preparation Of Acrylate Base Graphene And Graphene Oxide (Go) Nanocomposite Via Physical Blending As Pour Point Depressants (Ppd). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Lim, Shu Bee (2017) Preparation, Characterization And Properties Of Epoxy Particles Filled Epoxy Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Bain, Siti Nurba'inah Mohd (2017) Processing And Pelletizing Of High Grade Malaysian Iron Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zailani, Muhammad Dzafir Mohd (2017) Processing Of Galena From Air Piau, Kelantan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Tan, Jia Sheng (2017) Properties Of Different Fillers In Acrylic Resin For Denture Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zali, Muhammad Zulkif Mat (2017) Reduction Of Iron And Mica Content In Silica Sand From Terengganu Silica Consortium Sdn Bhd By Attrition Scrubbing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Kimberly, Tay Shu Yen (2017) Reductive Leaching Of Synthetic Manganese Ore Using Bamboo Sawdust As Reducing Agent- A Comparison Between Direct Hydrolysis-Leaching Process And Simultaneous. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Loh, Leh Hee (2017) Self-Healing Natural Rubber- Preparation And Characterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Zahari, Shahirah (2017) Simulation Of Magnetorheological Elastomer (Mre) Damping Mechanism. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Douglas, Bong Lip Seng (2017) Slope Stability Analysis Under Rapid Drawdown Conditions At Susu Dam With Finite Element Method Using Rs2. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Wahid, Wan Azrina Mohd (2017) Stretchable Conductive Ink Using Copper Fillers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Harnizi, Nur Haziqah Mohd (2017) Structure-Properties Relationship Of Water-Blown Epoxidized Natural Rubber Foam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Hisham, Asma Amira Badrol (2017) Synthesis And Characterization Of Indium And Gallium Based Nanowires. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Soo, Sock Kuan (2017) Synthesis And Characterization Of Metal Coupled Zno Nanomaterials With Plasmonic Effect. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Saharuddin, Nur Atiqah (2017) Synthesis And Characterization Of Tungsten Oxide_Zinc Oxide Hybrid Particles And Their Photocatalytic Study In Removal Of Rhb Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Aaron, Tan Cheng Shiong (2017) Synthesis of cadmium-free quantum dots. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rahim, Noor Hafizah Ab (2017) The Removal Of Heavy Metals By Phytoremediation Using Cyperus Alternifolius. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Azmi, Muhammad Irfan Mohd (2017) Uniaxial Compression Strength (Ucs) Test On Mechanical Behaviours Of Anisotropic Rock Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Rashid, Noor Adilah (2017) Validation Of Established Methods For Determination Of Fine Particle Breakage. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Cheah, Boon Wah (2017) A Comparison Study On Pca_Modular Pca And Lda For Face Recognition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Azizuddin, Nur Musyahadah (2017) A Miniaturized 2.4 Ghz Wilkinson Power Divider Using Complementary Split Ring Resonator. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tan, Jia Yiing (2017) A Study Of Capacitance-Voltage Characteristics For Metal-Oxidesemiconductor Structure On Goldcompensated High Resistivity Silicon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Khor, Eng Wong (2017) An Improvement Of Scrambling Technique By Using Modified Selected Mapping In Ofdm System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Soh, Yan Ying (2017) An Interface Circuit For Agriculture Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zaharimying, Wan Nurnabilah (2017) Analog Structural Modeling Of Resonant Tunneling Diode Using Ltspice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Goh, Duan Yeong (2017) Arowana Fish Ponds Monitoring System Using CDMA-Based Wireless Communication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Sam, Kah Seng (2017) Artificial Intelligence For Microwave Circuit Simulations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lim, Guo Jin (2017) Artificial Intelligent Based Arrhythmia Identification Via Single Lead Ecg Recording. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Jumat, Mieor Ahmad Safwan Meor Abd (2017) Automatic Fish Feeder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Chang, Zi Yi (2017) Ber Performance Evaluation Of Ofdm System Using Ldpc-Rs And Ldpc-Cc Product Codes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yong, Kai Xin (2017) Butterfly Species Recognition Using Artificial Neural Network (ANN). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Ong, Jing Hao (2017) Data-Glove-Based Hand Gesture Recognition System Using Flex Sensors And An Imu Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Salleh, Jumsiye (2017) Design 5g Wideband Fractal Antenna. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Azehar, Mohamad Hafiz Ahmad (2017) Design And Development Of Light Current Voltage (Liv) Measurement System For Solar Cell Based On Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yap, Chee Seong (2017) Design And Simulation Of High Q Inductors On Au-Compensated High Resistivity Silicon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yusof, Nur Syahadah (2017) Design And Simulation Of Low Noise Amplifier At 28 Ghz For 5g Wireless System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Raif, Nur Syahirah Abdul (2017) Design And Simulation Of Power Amplifier At 10 Ghz For X-Band Radar Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zhaki, Faris Amsyar Ahmad (2017) Design Of 0.13-Μm Cmos Lna With Flat Gain For Cognitive Radio Application_Design Of 0.13-Μm Cmos Lna With Flat Gain For Cognitive Radio Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lim, Chin Tiong (2017) Design Of Antenna For Uhf Rfid Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hasnni, Nur Zakiah Shahrul (2017) Design Of Automated Payment System Using Rfid Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hilda, Nur Aiman Diyana Mohd (2017) Design Of Four-Port Wilkinson Power Divider Using Circular Split Ring Resonator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Loh, Qing Zhen (2017) Designing A Low-Cost Educational Learning Kit Based On Arm Cortex-M Cores. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Wong, Kwo Yiang (2017) Developing A Control Protocol Algorithm For Stimulating The Street Light System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hazal, Nasrul Hadi (2017) Development Of A DC Motor Control. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tan, Yi Chen (2017) Development Of An Emotion Recognition System Based On Face Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yeoh, Seng Cheng (2017) Development Of Contrast Enhancement Method For Digital Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Andy, Tan Wei Keat (2017) Development Of Control Algorithm For Spot Cooling System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yeoh, Hooi Liang (2017) Development Of I-O Card For Pc By Using Microchip Via Rs232 Port And Usb Port. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Fouzi, Muhammad Hafiz Azri Mohd (2017) Development Of Iot System With Raspberry Pi For Switchgear Condition Monitoring. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Chiang, Yi Fan (2017) Development Of Semi-Automatic Liver Segmentation Method For Three-Dimensional Computed Tomography Dataset. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Wong, Soo Theng (2017) Effective Resistivity Analysis Using Cpw Transmission Line Model For Au-Compensated High Resistivity Silicon Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zakariah, Muhammad Saiful (2017) Electric Field Analysis Along Pin-Plane Electrodes In Sir Containing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zulkifli, Nurina (2017) Electric field analysis of water droplet deformation on solid insulation surface using finite element method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lim, Yuan Zhang (2017) Embedded Finger Vein Recognition System Using Raspberry Pi With Improved Region Of Interest. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hamdzah, Tun Khairul Firdaus Tun (2017) Energy Usage Monitoring System With Automatic Tariff Calculation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Abouhasera, Mohamed Khalid Mohamed (2017) Enhanced Algorithms By Combining Gauss-Seidel And Newton-Raphson In Load Flow Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Rosde, Muhamad Zul Fadhli (2017) Low Irradiation Concentrator Effects On The Photovoltaic Panels Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Soh, Siang Loong (2017) Ensemble Of Multiple Matchers For Finger Vein Recognition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zainudin, Faez Hazwan (2017) Low power design techniques for analog circuit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Ho, Kuen Seng (2017) Microwave Sterilizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Rozik, Nik Nor Amirah (2017) Modelling Of Advanced Iii-V Compound Semiconductor Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Chan, Yun Huan (2017) Oscillator Compensation Circuit For 27 Mhz. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Amran, Muzzammil (2017) Performance Analysis Of Single-Phase Induction Motor Using 14-Pole Rotor For Ceiling Fan Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Mohammad, Mohd Yusof (2017) Piezoelectric Based Vibration Energy Harvester. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Basaier, Jialade (2017) Investigation Of Edge Detection Techniques Based On Coronary Angiography Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hashim, Muhammad Hazwan (2017) Investigation On PVT Performance Under Low Intensity Irradiation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tan, Ker Lee (2017) Investigation On The Dc Characteristics Of The Resonant Tunneling Diode Through Empirical Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lim, Sheng Keong (2017) Iot-Healthcare Monitoring System With Capability To Detect Ecg, Blood Pressure And Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lina, Tay (2017) Ischemic Stroke Detection System With Computer Aided Diagnostic Capability. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tee, Kian Siang (2017) Radiation Detector Circuit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Hwong, Sing Pui (2017) Reconstruction Algorithm In Ofdm System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yusuf, Sabar (2017) Reliability Impact Of Demand Side Menagement (DSM) In A Wind Integrated Power System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lai, Lik Chin (2017) Reliability Impact Of Dynamic Thermal Rating System On Power System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Farihan, Mohamad (2017) Reliability Impact Of Energy Storage In A Wind Integrated Power System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Zafirah, Zainon (2017) Rfid Door Lock With Realization Of Internet Of Things For Smart Home System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Sim, Choon Yeee (2017) Simulation Of Path Optimisation Algorithms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Yaacob, Noor Diyana (2017) Social Spider Optimization On Pid Controller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Arshad, Muhammad Syarif (2017) Solar Powered Street Lighting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Chan, Hao Jie (2017) Speed Control Of Permanent Magnet Brushless DC Motor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Idnan, Muhammad Amirul Husni (2017) The Effect Of Partial Shading On Photovoltaic Panel Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Goh, Jinn Chyn (2017) Three Dimension Pixel Distribution Shifting Based Color Correction Method For Digital Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Rafidi, Nazrin Mohd (2017) Visual Based Sensor Cart Follower For Wheelchair By Using Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Ikhwan, Nur Iwana Mohd (2017) Water Antenna. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Amernudin, Nur Asmira (2017) A Study Of Purity And Recovery Of Carbon Dioxide From Binary Syngas Mixture Using Hydrotalcite In Pressure Equalized Pressure Swing Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rajalingam, Tharveen Raj (2017) A Study On The Purity And Recovery Of Carbon Dioxide Gas From Binary Flue Gas Mixture Using Different Adsorbents In Pressure Equalized Pressure Swingadsorptio. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Husaini, Noor Syaza (2017) Adsorption Of Terramycin On Activated Carbon Using Response Surface Methodology (RSM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hanifa, Nurul Husna Elyana (2017) Adsorptive Studies Of Bovine Serum Albumin (BSA) By PES-HAP-PVP Mixed Matrix Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hamzah, Tengku Nur Amalina Tengku Ahmad Suharizam (2017) Aggregation And Sedimentation Of Electrosterically Stabilized Iron Oxide Nanoparticle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Chyi Sean (2017) Biological Motor To Move Loads At Microscales-Kinematic Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Selvam, Sathiswaran (2017) Biosorption Of Lead (Ii) Ions By Stem Of Manihot Esculenta (Cassava Stem). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ibrahim, Nor Ezaney (2017) Biosynthesis Of Silver Nanoparticles Using Plant Extract Of Colubrina Asiatica And Its Characterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kuak, Li Ming (2017) Carbon Dioxide Adsorption On Eaf Steel Slag Derived Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hamzah, Ali Hassan (2017) Corrosion Inhibition Of Mild Steel In 1 M Hydrochloric Acid Solution By Cymbopogon Citratus Leaves Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Yee Wei (2017) Finger Vein Recognition Based On An Improved K-Nearest Centroid Neighbor Classifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tan, Wei Jun (2017) For In-Pipe Inspection Platform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lim, Chun Ming (2017) Hardware And Software Implementation Of Artificial Neural Network In Altera De1-Soc. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Lew, Yit Shien (2017) High Resistivity Silicon- Deep-Level Doping Compensation Using Elemental Gold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Saiful, Erva Natasha Mohd (2017) Hybrid RF And Solar PV Energy Harvester. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Tan, Weng Hooi (2017) Implementation Of Bluetooth Baseband Controller Based On FPGA Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik & Elektronik. (Submitted)

Rosli, Nur Hasniena Mohd (2017) Migration Of Boiler Drum Temperature (BDT) Into Aspen Dynamics Environment For Teaching And Research Purposes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Florence, Chan (2017) Molecularly Imprinted Silica Matrix In Detection Of Creatinine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Loh, Woei Fang (2017) Modified Kinetic Modelling Of Isoamyl Acetate Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Neoh, Sun Hao (2017) Performance Of Lemna Sp. And Spirodela Sp. On Nutrient Removal From Fish Farm Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kamal, Muhammad Zuber Al Awwam Mustapa (2017) Performance Of Poly(Vinyl Alcohol) Asymmetric Membrane Incorporated With Graphene Oxide For Pervaporation Dehydration Of Ethanol Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zamberi, Nur Faziera Natasha (2017) Performance Of Tio2 Via Screen Printing Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Shu Xian (2017) Performance Study Of Calcium Hypochlorite On Wastewater Treatment System From Biomass Gasification Water Scrubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Abidin, Norshahirah Adina Zainol (2017) Performance Study Of Potash Alum On Wastewater Treatment System From Biomass Gasifier Water Scrubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Nur Izzati Fitri Zaquan (2017) Polysulfone (PSF) Membrane Incorporated With Polyamide-Tethered Polyhedral Oligomeric Silsequioxane (POSS) For Carbon Dioxide Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azhari, Azahirah (2017) Preparation And Characterization Of Iron Oxide Nanocomposite For Removal Of Methylene Blue. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Anne Lee (2017) Preparation Of Activated Carbon From Mangrove Pile Leftover Via Chemical Activation Using Phosphoric Acid For Methylene Blue Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ishak, Siti Khairunnisa (2017) Preparation Of Activated Carbon From Rice Husk By Microwave Irradiation For Adsorption Of Methylene Blue Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rusdi, Nur Fatin Syahira (2017) Pretreatment Of Dewatered Sludge Formicrobial Fuel Cell Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Halil, Nur Hafizah Abd (2017) Protein Immobilization On Glutaraldehyde Activated Nylon Membranes- Effects Of The Activation Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saadon, Nur Aziah (2017) Deoxygenation Of Palmitic Acid To Diesel-Like Hydrocarbons Via NI-SBA-15. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Imas, Siti Nurul Khairaimi (2017) Effect Of Ammonium And Nitrite Addition On The Anaerobic Treatment Of Palm Oil Mill Effluent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yunus, Nur Fatihah (2017) Effect Of The Microchannel Configurations On Mixing Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hat, Khairunisa (2017) Green Synthesis Of Silver Particles At Room Temperature Using Gynura Procumbens Aqueous Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ahmad, Nor Adibah (2017) Heterogenous Cation Exchange Membrane- Fabrication, Characterization And Performance Studies Using Electrochemical Impedance Spectroscopy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tavayogeshwary, Thangadurai (2017) Hybrid Adsorbent For In Situ Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ismail, Anis Farhain (2017) Recovery Lignin And Its Fouling Study Using Nanofiltration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Samsukamal, Nur Aqilah (2017) Removal Of Methylene Blue Using Iron Oxide Prepared Through Solid And Wet Solution Route. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Idris, Fatin Nur Liyana Mohd (2017) Simulation Of Methyl Ethyl Ketone (MEK) Production In A Fixed Bed Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zakaria, Nur Zaherra (2017) Stereospecific Biotransformation Of 2,6,6 Trimethylcyclohex-2-Ene-1,4-Dione (Ketoisophorone) In A Non-Growing Whole Cell Saccharomyces Cerevisiae. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chong, Mei Yan (2017) Studies Of Antifouling Properties On Ultrafiltration Membrane For Oily Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chong, Ching Yang (2017) Study Of Purity And Recovery Of Carbon Dioxidefrom Binary Mixture Of Natural Gas Usingdifferent Adsorbents In Pressure Equalizedpressure Swing Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Pavinthran, Maran+ (2017) Study on the effects of tio2 doping on pure sno2 for ethanol gas sensing properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Idrus, Nurul Aina (2017) Synthesis And Characteristics Of Magnetic Hydrogels Prepared From Sawdust And Its Potential Application In Hydrogen Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saafie, Nabilah (2017) Utilization Of Watermelon Peels As A Substrate For Alpha Amylase Production By Bacillus Subtilis In Solid State Fermentation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saat, Nor Azlinda Abdul (2017) Volume Reduction And Water Recovery Of Palm Oil Mill Effluent (POME) Using Membrane Distillation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Siow Yoke (2017) Water Recovery From Produced Water Via Forward Osmosis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Awi, Nurul Busra (2017) A Single Unit Concept And Design Of A High Maneuverability Mobile Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kholiq, Muhammad Iqmal Hakim Abd (2017) Aerial Image Of Monitoring USM Campus Surrounding Area For Traffic Congestion Problem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Malik, Muhammad Abdul Qahhar Abdul (2017) Analysis Of Rolling Contact. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Liew, Shan Kun (2017) Anti-Slosh Baffle Performance In Horizontal Cylindrical Separator Tank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Misman, Lailisa Nur (2017) Application Of Cnc Simulator For CNC Machining Via CAD-CAM. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hwang, Jia Qi (2017) Application Of Pull-Kanban System To Reduce Inventory And Lead Time In A Manufacturing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rogaizat, Farah Naimah (2017) Application Of The Active Force Control Method To Reduce The Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tee, Kah Hui (2017) Appointment-Based Queue Management System Using Geolocation Information. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jerome, Lee Jie Jen (2017) Benchmark Analysis Of Heat Conduction Problems With Adaptive Fea Code Polyde. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Anuar, Syed Muhammad Syimir Syed Mohamed (2017) CFD Calculation Of Impinging Confined Gas Jet Flamesfires. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Murad, Ahmad Firdaus (2017) Characterization Of The Piezoelectric Patch Sensor And Actuator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jaafar, Nur Azima Aziz (2017) Characterizaton Of The Sandwich-Type Beam With Double Piezoelectric Materials Using Ansys Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Jin Teik (2017) Collaboration Managemen For University-Industry Projects In Sme's Food Processing Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nawi, Ruzaini Mohd (2017) Collapsible Impact Energy Absorber Of Multi Tubular Structure By Computational Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azman, Muhammad Aqil (2017) Construction Of Multigrid Solver For 2D Heat Conduction Problem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Muhamat, Noor Alwani (2017) Controlling Greenhouse Environment For Green Rose Plantation Using Raspberry Pi Microcontroller And Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hashim, Muhammad Reduan (2017) Comparison Method Of Cutting Honeycomb Core. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khor, Li Sing (2017) Defect Reduction Through Customer-Vendor Collaboration In Kaizen. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jaludin, Ahmad Amin Azmi (2017) Design Innovation For Calligraphy Using Reverse Engineering And CNC Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Musa, Zainal (2017) Design Of An Easy To Clean Ceiling Fan For Domestic Users. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ghazali, Mohamad Hazwan Mohd (2017) Design Of Master Mask Film, Fabrication Of PDMS Mold And Fabricate Uv Led Curing Unit To Test Imprint Capability Of Roll-To-Plate Nanoimprint Lithography System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Bakar, Norhayati Abu (2017) Design Of Mathematical Model For Locomotion Control Of Snake-Like Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mustapa, Nurul Safinaz (2017) Design Of Photobioreactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fathi, Farhana Mohamad (2017) Design Of Thermal Cautery Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Muhaimi, Nur Muhaimin Aidil (2017) Designing A Combustion Chamber For Cascading Thermoelectric And Thermophotovoltaic Power System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Manivelu, Vishnuwaaran (2017) Development And Perfomance Of Cogeneration Biomass Stove Integrated With Thermoelectric Generator (Teg). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hamid, Siti Nuraimi Abdul (2017) Development Of A Crack Mouth Displacement Gauge For Fracture Mechanics Specimens. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Zhi Wey (2017) Development Of Fuel Consumption Engine Map For Myvi Engine Volumetrically. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Teoh, Cheng Lay (2017) Development Of Instantaneous Fuel Consumption Measuring System Using Arduino. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)