Items where Year is 2022

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 294.

Article

De' nan, Fatimah and Hashim, Nor Salwani and Singh, Amarpreet Kaur Mahinder (2022) Development of efficiency analysis for I-beam steel section with web opening via numerical method. World Journal of Engineering. ISSN 1708-5284 (In Press)

De’nan, Fatimah and Johari, Megat Azmi Megat and Nyandau, Shaneez Christie Anak and Hashim, Nor Salwani (2022) The influence of palm oil fuel ash and metakaolin on the strength of concrete and crack resistance of reinforced concrete beam: a review. World Journal of Engineering. ISSN 1708-5284 (In Press)

Hussain, Nik Hazlina Nik and Noor, Norhayati Mohd and Ismail, Shaiful Bahari and Ahmad, Nik Muhammad Arif Nik (2022) Prevalence of psychosomatic and genitourinary syndrome among menopausal women: a systematic review and meta-analysis. Prevalence of psychosomatic and genitourinary syndrome among menopausal women: a systematic review and meta-analysis.

Isa, Anniliza Mohd and Mydin, Al-Amin and Abdullah, Abdul Ghani Kanesan (2022) Autonomy in Classroom Assessment: Teachers' Perceptions on the Abolition of Level 1 Biennials Examinations in Malaysian National Schools. Malaysian Journal of Social Sciences and Humanities, 7 (3). pp. 1-11. ISSN 2504-8562

Monograph

Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With TiO2 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Mutalib, Nurul Rafika Amira (2022) Analysis Of Grease Degradation Under Elastohydrodynamic Lubricant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Adnan, Nur Sajha (2022) Impact Of Cross-Linking Polymer To Bridge The Porous Membrane And Selective Layer In Membrane Absorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Adrian Lim, Zan Kuang (2022) Characterization Of Natural Resin And Synthetic Resin In Fiber Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad, Mohd Zuhair (2022) Analysis Of Martensitic Transformation And Bending Deformation Of NiTi Arch Wire Against Different Deflection And Temperature Range. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad, Musa (2022) Deformation Behaviour Of Metallic Cellular Structure Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Khaizi, Aini Syazwina (2022) A Pilot Study Of Heat Stress Risk Evaluation While Wearing Personal Protective Equipment Suit In A Tropical Climate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nadzri, Faiz Farhan (2022) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nordin, Ahmad Faris (2022) Lean Premixed Pre-Vaporized Combustion In A Swirl Stabilized Liquid Fuel Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Alauden, Muhammad Rafiq (2022) Characteristics Study Of Emulsified Biofuel And Egg Yolk Oil (EBEYO) Properties And Its Performance In Compression-Ignition Engine Using New Formulated Surfactants And Composition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ali, Maisara Adleena Mohd (2022) Immobilized Lipase Catalysed Esterification Of Formic Acid And Methanol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Andyappan, A Helan R (2022) Hydrolysis Of Waste Cooking Oil By Free Candida Rugosa Lipase. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ang, Cheau Hui (2022) Deformation And Stress Analysis Of 3D Printed Spanner Wrench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Anuar, Muhamad Shafiq (2022) Design And Development Of Internet Of Things (IoT) Based System For Monitoring Energy Consumption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Arzuan, Muhamad Zulhelmi Nor (2022) Colorimetric Detection Of Heavy Metal Ions Using Silver Nanoparticles Synthesized From Alpinia Galanga. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Au, Jia Yu (2022) Preparation Of Biochar From Palm Oil Mill Effluent (Pome) Sludge By Microwave Pyrolysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Awang Mansor, Muhammad Adib Haikal (2022) Analysis Of Design Of An Intervention Oil Palm Sickle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azaman, Amirul Fahmi (2022) The Effect Of Hydrogen Diffusion In Orthodontic NiTi Archwire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhan, Anis Masturina (2022) Reduce Manufacturing Lead Time Through PDCA And Waste Elimination In Metal Casting Company: A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhar, Emillia Eizleen Md (2022) Statistical Modeling And Optimization Of Process Parameters For 2,4-Dichlorophenoxyacetic Acid Removal By Using Ac Pdmaema Hydrogel Adsorbent Comparison Of Different Rsm Designs And Ann Training Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azhar, Muhammad Asyraf (2022) Miniature Specimen Fracture Toughness Testing: A Concise Review. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Aziz, Mohamad Fazrul Ikmal (2022) Tamarind Seed Based Activated Carbon Prepared Via Cufe Layered For Caffeine Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azlan, Nur Qistina Azfa Mohd (2022) Batch Adsorption Of Bisphenol A (Bpa) On Coconut Shell Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Azmin, Abdul Rahman (2022) Experimental Study Of Water Based Air Conditioning System For Space Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Badrul Hisham, Alya Nabilah (2022) Numerical Investigations On Sprue Configuration For Multi-Cavity Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Baharom, Amiranordiana (2022) Recovery Of Oil From Palm Oil Mill Effluent (Pome) As Biodiesel Feedstock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Basirah, Aiman (2022) Analysis Of Micro Generator Performance From Porous Media Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chai, Chang Yuan (2022) Analysis Of Heat Treatment Effect On Tensile Properties Of 3D Printed Carbon Fiber Composite And Comparing Mechanical Properties On Manufacturing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chan, Jian Siang (2022) Performance Of Combustion Chamber For Micro Gas Turbine (MGT) Application Running On Palm Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chandran, Dhiwakar (2022) Corncob Modified By Cufe Layered For Oxytetracycline Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chelvan, Shaila Pannir (2022) Correlating Parameters With Methane Purity And Recovery By Pressure Swing Adsorption In Methane Enrichment From Biogas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chen, Yi (2022) Quaternary Aqueous Biphasis Mixture For Enzyme Extraction From Banana. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chin, Jiun How (2022) Performance Comparison Of AFC-CA, AFC-GA, AFC-PSO And AFC-NN In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chong, Yian Sing (2022) Synthesis Of Polyvinyl Alcohol Multiwalled Carbon Nanotubes Composites For Malachite Green Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Chow, Hong Man (2022) Effect Of Different Biodiesel Blends On Engine Performance, Emissions And Combustion Characteristics Under Various Engine Torques And Speeds Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Dhiwya, Paramasivam (2022) Removal Of Humic Acid From Water Using An Ozonation Alone And Combination Of Ozonation And Adsorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ezra Tan, Yi Chyn (2022) Philosophical Tools Of Lean Six Sigma In Service Sector: Implications For Organisational Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Fadzil, Haiekal Mustaqim Mohd (2022) Statistical Modeling And Optimization Of Process Parameters For 2,4-Dichlorophenoxyacetic Acid Removal By Using Ac Pdmaema Hydrogel Adsorbent Comparison Of Different Rsm Designs And Ann Training Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Faudzi, Inas Irdina Mohd (2022) Superhydrophobic Pvdf Nmp Caco3 Nanoparticles Membrane For Membrane Filtration Of Oil Water Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ganiashan, Eesvaran (2022) Structural Integrity Investigation Of SAC305 Lead Free Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Goh, Jian Loon (2022) Greywater Treatment Using Modified Pvdf Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Goh, Zi Qi (2022) Chemically Treated Bamboo With Sodium Hydroxide And Potassium Hydroxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Gun, Yong Yin (2022) Optimization Of 3D Printing Of Shape Memory Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Habidin, Mohamad Ridzuan (2022) 3D Scanner App For New Product Development Due To Covid-19 Endemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Halim, Farah Zahidah Abd (2022) Microalgae Granulation Correlation Between Microalgae Growth And Eps Content. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hamid, Mohamad Idham (2022) Experimental Study Of Building Materials Made Of Waste Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamidi, Muhammad Nafiz (2022) Micropitting And Wear Assessment Of Roller Bearing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hashim, Nur Amanina Ayuni (2022) Witness Simulation Of Machine Breakdowns For Small, Medium And Large Aircrafts During Turnaround Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Heah, Joo Yee (2022) The Effect Of Glucose Concentration On The Biotransformation Of Valencene To Nootkatone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hooi, Khey Herng (2022) Effects Of Fin Length And Fin Valley On The Performance Of Bus Duct Conductor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

How, Mun Cheng (2022) Smartphone-Assisted Microscopic Imaging Prediction Of Mass And Chlorophyll Contents In Duckweeds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Husin, Iqbal Aiman Kamal (2022) The Effect Of Nanocellulose On PVDFCarbon Black In The Fabrication Of Conductive Thin Films For Electrochemical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Hussin, Muhamad Amirul Aiman (2022) Comparative Assessment Of Air-Cooled And Water-Cooled Thermoelectric Power System “Simulation Approach”. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ilias, Izzah Nadhilah (2022) Automatic Additive Manufacturing Product Generation Through Computer Aided Process Planning Using 3D/4D/5D Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismadi, Nurul Syamimi Zahirah (2022) Aerodynamic Design Of A Roof Fairing For Trucks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Halimatusaadiah (2022) Coconut Husk Based Activated Carbon Produced Via Sodium Bicarbonate Activation For Chloramphenicol Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ismail, Nur Azwahana (2022) Simulation Of Check-In Passenger Flow For International Departure Due To Covid19 Situations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Jamaludin, Amierul Hafiezam (2022) Preparation And Characterization Of Activated Carbon From Oil Palm Trunk Fiber By Chemical Activation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

James, Law Kah Chun (2022) Macroscopic Fluid Flow Of Low Gradient Magnetophoresis Through Cellulose Matrix. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Jason, Edwin (2022) Non-Linear Contact Finite Element Analysis Of Split Hopkisnon Tensile Bar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kabeer, Saiful Munir Sultan Syed Ahmad (2022) Synthesis Of Zinc Oxide Nanoparticles Using Gallic Acid Characterization And Evaluation Of Antioxidant Activity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kamar Shah, Noor Fajwa (2022) Study And Analysis Of Piezo Bender For Energy Harvesting Application Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Karthigesan, Velautham (2022) Synthesis Of Chitosan-Multiwalled Carbon Nanotubes Nanocomposite For The Removal Of Remazol Black B Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Khir, Siti Shahanis Mohd (2022) Modification Of Copper Mesh To Achieve Superhydrophobic Surface. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Khoo, Boon Sheng (2022) Development Of A Virtual Vehicle Identification For Tracking Hit-And-Run Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kumaresan, Vengdasan (2022) Dynamic Simulation Of Continuous Polystyrene Reactor Using Python. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kumeren, Isswar Senthil (2022) Hydrothermal Carbonization of Dried Leaves as Adsorbent for Removal of Chloramphenicol compounds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Law, Ji Pin (2022) Batch Adsorption Study For Removal Of Chloramphenicol Using Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Kai Chen (2022) Product Design And Development Using Virtual Reality And CAD/CAM System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Li Ying (2022) The Removal Of Oil From Oil-In-Water Emulsions By Modified Kapok Fiber With Hydrochloric Acid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Xing Yii (2022) Palm Shell Based Activated Carbon Modified By Cufe Layered For Amoxicillin Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lee, Zhao Yang (2022) Development Of Machine Learning User Interface For Pump Diagnostics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Liew, Jin Fung (2022) Simulation Of Passenger Flow For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Jou Wyn (2022) Experimental Study On Powder Coated Surface With Polydur Zinc Based Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Kwan Hue (2022) Fiber Misalignment Effect On Compressive Properties Of Jute And Kevlar Composite Under Impact And Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Si Ying (2022) Developing A Discrete-Event Simulation Model For Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Siew Li (2022) Role Of Microalgal Organic Matterderived Biocoating Towards Cell Deposition In Natural Biofilm Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Lim, Wen Kai (2022) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Loganya, Supramaniam (2022) Aerogel Coating On The Copper Mesh As Superhydrophobic Porous Layer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Loh, Loh Li Sin_ (2022) Quaternary Aqueous Biphasic Mixture For Protein Extraction From Papaya. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Makin, Mohamad Zainul Wafak (2022) In-Situ Transesterification Of Micro Algae To Fatty Acid Methyl Ester (Fame) Process Control And Optimization Study Using Aspen Plus Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mamat, Muhammad Hakimi Firdaus (2022) Adsorption Of Copper (Ii) Ions In Wastewater Using Mangrove-Based Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Manogaran, Sathis Kumar (2022) Demulsification Of Emulsion Effluent Using Modified Palm Oil Fuel Ash (Pofa). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Md Sukri, Muhammad Ahnaf Ataulah (2022) Design And Testing Of Patient-Specific Ankle Foot Orthosis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Nizar, Luqman Haikal (2022) Innovative Tool For Composite Machining In Aerospace Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Shaberi, Mohamad Nazhan (2022) Biomechanical Evaluation Of Spinal Loadings During Oil-Palm Plantation Tasks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Zahari, Ahmad Amirul (2022) Controlling An-Inverted Pendulum System Using A Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamed Ghouse, Muhammad Suffi Fazari (2022) Simulation Of Cantilevered Piezoelectric Energy Harvesters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Faizal, Muhammad Faris (2022) Simulation Of Multistage Cascaded Thermoelectric Generators With Adaptive Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Hafni, Aidil Azwadi (2022) Mechanical-Physical Properties Characterization Of Alternative Materials For The Application In Highway Guardrail. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Harizi, Muhammad Hafizam Afiq (2022) Data Mining Analysis Of Chronic Kidney Disease (CKD) Level. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Noor Ariffin, Siti Syairah (2022) Tribological Study Of Additive Manufactured Aluminium Alloy ER5356 For Potential Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Nor Halimuddin, Normalyana (2022) Three-Dimensional Elastic-Plastic Crack Tip Stress Fields. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Shafee, Muhammad Amirul Farhan (2022) Predictive Analysis Of Ice, Hybrid And Electric Vehicle: Selected Case Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Zaini, Mohamad Zulhisyam (2022) Potential Failure Mode In Pergau Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mokhtar, Mohamad Dzul Asyraf (2022) Development Of Omnidirectional Drive System Using Mecanum Wheels For Patient Transfer Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Moustafa Hebish, Anas Ahmed Moustafa Moustafa (2022) Optimization Of Mild Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhamad Fikri, Jaafar (2022) Shell Eco-Marathon Fuel Consumption Engine Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhammad, Nurul Nadia (2022) Colorimetric Detection of Heavy Metal Ions Using Green Synthesized Silver Nanoparticles from Kaempferia Galanga Rhizomes Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Munisuaran, Kishen (2022) Performance Comparison Of Steam And Air-Steam Gasification Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Munusamy, Sharven (2022) Development Of A Portable Low Strain Rate Testing Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Murthi, Bohesharvind Naraiyanan (2022) Degradation Of Oxytetracycline From Aquaculture Wastewater Using Sole Ozonation And Catalytic Ozonation In The Presence Of Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Mynn Wei, Teoh (2022) Detection And Counting Of E. Coli On Specialized Test Piece Using Yolo v4. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nadesan, Suvithra (2022) Removal Of Oxytetracycline From Water Using Ozonation Alone And Combination Of Catalytic Ozonation With Zinc Oxide Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Navieen, Murugaiah (2022) Piper Betle Leaves Extract As A Green Corrosion Inhibitor For Aluminium In Acidic Medium Characterization And Evaluation Of Antioxidant, Phenolic And Flavonoid Content. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ng, Kah Hoe (2022) Physical, Mechanical, and Chemical Characterization of Two Sympodial Bamboos (Gigantochloa Ligulata & Gigantochloa Scortechinii) & Their Potential for Construction Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ngo, Shi Hui (2022) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nordin, Muhammad Nor Akmal (2022) Effects Of Oil Palm Plantation Tasks On Skeletal Muscle Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nurdin, Zainur Fazira (2022) The Effect Of Valencene Biotransformation At Different Growth Phase Of Yarrowia Lipolytica. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Oh, Hong Keat (2022) Development Of Modified Mof-5 Towards Enhancing Malachite Green Dye Removal From Aqueous Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Omar, Mohammad Shafiq (2022) Meso-Scale Modelling Of Pultruded Hybrid Composite Under Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Guan Kai (2022) Effects Of Air Inlet Angle On The Combustion And Emission Characteristics Of A Cylindrical Chamber Fueled With Waste Cooking Oil Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Zi Hui (2022) Heat Dissipation Enhancement Using Staggered Fin Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ooi, Qian Hui (2022) Experimental Study On The Solvent-Free, Non-Catalytic Synthesis Of Ethyl Acetate By The Esterification Of Ethanol With Acetic Anhydride In A Coiled Flow Inverter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Osman, Muhamad Nazmi (2022) Conceptual Analysis Of Lean Principles And Tools In Manufacturing Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Paul, Timothy Stephen Raj (2022) Activated Carbon From Mangrove By Microwave Irradiation For Adsorption Of Lead(Ii) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Raja Gobal, Hehgeraj (2022) Study Of Deformation And Crack Propagation On Component During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajandram, Logaisri (2022) Emulsion Ionic Liquid Membrane For Ibuprofen Removal From Synthetic Wastewater Using Aliquat 336. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Raman, Logan Raj (2022) Conversion Of Oil Palm Empty Fruit Brunch (Opefb) Into Hydrochar Via Hydrothermal Carbonization And Study On The Suitability For Soil Ammendment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ramasamy, Ram Ghautaam P. (2022) Synthesis Of Ordered Mesoporous Sno2 Using Sba-15 Nanocasting Template And Its Performance As A Gas Sensor For Hydrogen Sulfide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Ramlan, Nur Diyana (2022) Comparison Of Bio-Oil And Synthetic Lubricants Tribological Characters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ramli, Nor Hairie (2022) Study Of The Parameter Interaction In A Closed_Loop Control Of A Process Intensification System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rashid, Nur Alya (2022) Conversion Of Waste Cooking Oil Into Biofuels Using Trimetallic Catalyst. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Razak, Abang Muhammad Farith (2022) Optimization Of Flameless Cyclone Combustion Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razaman, Noor Suhaila (2022) Decolourization Of Brilliant Green Dye In Aqueous Media By Using Modified Mof-5 Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rohaimi, Ahmad Firdaus Mohamad (2022) Reactive Distillation Simulation For Production Of Methyl Acetate Kinetic Model Parameter Optimization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Rohizam, Rajeeha (2022) Cycle Time Improvement Of Combined Punching And Drilling Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Roslan, Nurfarah Arina (2022) Toxic Gas Dispersion Model Based On Neural Pattern Recognition Networks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Roslee, Muhammad Sharifuddin (2022) Investigating The Performance Of Metaheuristics To Optimize The Revenue Of Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Fadlhlin Sakina (2022) Compressive Properties Of Jute/Kevlar Under Static And Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Muhammad Farid Amirul (2022) Experimental Study On The Impact Of DBD Plasma Actuator Geometry And Electrical Input On Thrust Generation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Runnizam, Muhaimin Hazmi Khai (2022) Oil-From-Water Removal Under Low Gradient Magnetic Separation (LGMS). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sahrani, Muhamad Ikhwan Mohd (2022) Synthesis And Performance Ordered Sno2 Using Sba-16 For Detection Of Dangerous Gases. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Salleh, Muhammad Safwan (2022) Simulation Of Flexible Capacitive Strain Sensor For Food Packaging Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Salleh, Nabihah Mat (2022) Effect Of Temperature Towards Membrane Fouling By Microalgae Algal Organic Matter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Salleh, Siti Norfatihah (2022) Safety Culture Awareness Of Laboratory Activities Among Universiti Sains Malaysia (USM) Engineering Students. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Samsu, Muhammad Ariffin (2022) Process Optimization Of Biomass Combustion Of An Industrial Boiler In A Palm Oil Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saravanan, Gayathri (2022) A New Approach Of Application Of Superhydrophobic Coating On Cultivation Of Giant Duckweed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sattigamurti, Thibbaganesh (2022) Synthesis And Performance Of Ordered Mesoporous Sno2 Using Kit-6 Nanocasting For Detection Of Hydrogen Sulphide Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Saufi, Muhammad Amirul Asraf Mohd (2022) Performance Enhancement Of PesZif-L Mixed Matrix Membrane Using Ionic Liquid For Co2N2 Separation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Sekar, Sageein (2022) Development Of Affordable Full Body Isolation Pod. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shahidan, Mohd Syakir (2022) Training Simulator Batch Polystyrene Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Shamsul Khair, Nurul Syifa’ (2022) Effect Of Ageing Treatment On Force-Deflection Behaviour Of NiTi Wire In Three-Point And Three-Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shea Wen, Lee (2022) Powered Stretcher For Patient Transfer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Singh, Suraj (2022) Combustion Characteristics Study Of Low Grade Producer Gas From Carbonized Empty Fruit Bunch (EFB) Briquettes Gasification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Subramaniam, Reasmyraj R (2022) Poly(4-Methyl-1-Pentene) Mixed-Matrix Membrane Fabrication With Silica Nanoparticle Filler For Co2 N2 Gas Separation Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suntharam, Nanthini Mohana (2022) Removal Of Zinc (Ii) Ions From Industrial Wastewater By Activated Carbon Synthesized From Mangrove (Rhizophora Mangle). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Suri, Muhammad Farhan Hakim (2022) Adsorptive Desulphurization Of Dibenzothiophene By Using Bentonite-Based Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Sher Wen (2022) Final Design Improvement Of Replica Trophy From Prototype To Mass Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Wee Hui (2022) Production Of Hydrochar-Based Catalyst From Oil Palm Trunk Via Hydrothermal Carbonization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tan, Yong Quan (2022) Finite Element Analysis Of Pull-Out Performance Of Bone Screw. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tay, Ying Keat (2022) Evaluation Of Turbidity Measuring Using IoT Based Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teh, Yoong Sin (2022) Colorimetric Detection Of Heavy Metal Ions Using Green Synthesised Silver Nanoparticles From Curcuma Xanthorrhiza Extract. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teo, Yao Aik (2022) Removal Of Sulfate From Biodiesel Production Wastewater Through Hybrid Oil-Water Filtration And Gypsum Precipitation-Nanofiltration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Teoh, Wei Xin (2022) Hydrothermal Carbonisation Of Papaya Peels As Adsorbent For Removal Of Chloramphenicol Compounds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Tharumaalingam, Vimalraj (2022) Fuel Consumption And Fuel Economy Of Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Pei Wen (2022) Mechanical Properties Of Porous NiTi Shape Memory Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Zie Jen (2022) Vibration-Fatigue Assessment On Electronics Interconnections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yaacob, Jeredraj (2022) Biodiesel Production Using Waste Cooking Oil Energy Optimization Study Using Pinch And Heat Exchanger Network HEN Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Yassine Mahamat, Ibrahim Mahamat (2022) Effect Of Transition Taper Length On Air-Filled Substrate Integrated Waveguide Losses. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yee, Qian Hui (2022) Design And Development Of A Flight Operator Safety Audit System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusman, Muhammad Syafiq Farhan (2022) Fatigue Life Prediction For Small Component Welds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusri, Akmal (2022) Stress-Strain Behaviour Of Conductive Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zaharum, Nurul Hanisarina (2022) Elucidating Electrochemical Properties Of Suitable Polymer Coated On Carbon Electrode To Detect Heavy Metals. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zainal, Danial Syakirin (2022) Batch Adsorption Of Amoxicillin On Coconut Shell Activated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zainal Abidin, Nur Sarah (2022) Evaluation Of Sound Absorption Of Micro Perforated Panel Made By Palm Oil Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Muhammad Syafiq (2022) Design Of A Miniature Axial Blower For A Portable Thermal Comfort System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Nurul Asyiqin (2022) Correlating Parameters With Hydrogen Purity And Recovery By Psa In Hydrogen Purification From Syngas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zakree, Syed Muhammad Al Hafiz Syed (2022) Synthesis And Characterization Of Zinc Oxide Nanoparticles Using Ascorbic Acid For Evaluation Of Antioxidant Activity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zalkapli, Muhammad Amir (2022) Nanoindentation Of Copper Thin Film On Silicon Substrates. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zambri, Muhammad Ridzuan (2022) Nonlinear Chemical Process Monitoring And Fault Detection Based On Modified Lstm Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zol, Nur Adlin Mohd (2022) Harvesting The Nutrients From Fish Farm Effluent Via Ultrafiltration Process As Foliar Spray. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zubir, Zulfahmi (2022) Bioelectricity Generation Of Glycerine Waste In Microbial Fuel Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifili, Al Azim Faiz (2022) Design Of Kenaf Fiber Polymer Composite For Interior Car Door Panel Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Nurul Nabielah (2022) Immobilization Of Different Chromophores On Cellulose Acetate Butyrate Flat-Sheet To Detect Heavy Metal Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Zulkifli, Umy Aliya (2022) Biotransformation Of Valencene Utilizing Yarrowia Lipolytica In Buffer Systems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Conference or Workshop Item

Asl, Moussa Pourya (2022) Gender, Space, And Fantasy: Women’s Heterotopic Identities In Contemporary Japanese And Iranian Fiction. In: International Conference on Malay, Arabic and English Literature 2022, 19 - 20 September 2022, UniSZA, Terengganu Malaysia. (Submitted)

Book

Asl, Moussa Pourya (2022) Gender, Place, and Identity of South Asian Women. IGI Global, Pennsylvania, United States. ISBN 9781668436288

Miles, Lilian and Endut, Noraida and Tim, Freeman and Kelvin, Ying and Lai, Wan Teng and Mat Yasin, Suziana Mat Yasin (2022) A Handbook to Support the Sexual and Reproductive Health Needs of Factory Women Migrant Workers. Universiti sains malaysia, Pusat Pengajian Sains Kemasyarakatan.

Thesis

A Rahim, Afiq Izzudin (2022) Development of machine learning sentiment analyzer and quality classifier (MLSAQC) and its application in analysing hospital patient satisfaction from Facebook reviews in Malaysia. Masters thesis, Universiti Sains Malaysia.

Ab Ghani, Nur Atikah (2022) Synthesis and characterization of zirconia-calcia nanocomposite for dental application. Masters thesis, Universiti Sains Malaysia.

Ab Samad, Maisarah (2022) Molecular and regulatory profiling of murine transcription factor CTCFL in non-germ cells and male germline stem cells. Masters thesis, Universiti Sains Malaysia.

Abd. Hadi, Nurul Hidayah (2022) Effects of combined channa striatus supplementation with countermovement jumping exercise on bone parameters, muscular performance and antioxidant status in young physically inactive males. Masters thesis, Universiti Sains Malaysia.

Adib, Siti Munirah Mohd (2022) Melioidosis in Kelantan : disease outcome, distribution and genotyping of burkholderia pseudomallei from patients and environments. Masters thesis, Universiti Sains Malaysia.

Ahmad, Nur Fatihah (2022) The effect of cinnamomum verum and clinacanthus nutans aqueous extract on dehydroepiandrosteron induced polycystic ovarian syndrome (PCOS) in rat. Masters thesis, Universiti Sains Malaysia.

Ahmad, Nur Hidayah (2022) Development Of Supply Chain Management Framework For Building Information Modelling Implementation In Public Sector Construction Projects. PhD thesis, Universiti Sains Malaysia..

Al-Selwi, Abdullah Abdulkhaleq Mohammed (2022) 3D morphometric evaluation of palatal rugae among Malaysian Malay population. Masters thesis, Universiti Sains Malaysia.

Al-Selwi, Abdullah Abdulkhaleq Mohammed (2022) 3D morphometric evaluation of palatal rugae among Malaysian Malay population. Masters thesis, Universiti Sains Malaysia.

Alawida, Moatsum Khalif Oduh (2022) Chaotification Methods For Enhancing One-Dimension Digital Chaotic Maps For Applications In Cryptography. PhD thesis, Universiti Sains Malaysia.

Antoine, Audrey Antoine A/P Max (2022) Visual perception of abstract art images in extraversion and ambiversion at P300 and N200. Masters thesis, Universiti Sains Malaysia.

Atif, Saira (2022) Aquaporins as salivary protein biomarkers for xerostomia and the effects of xerostomia on oral health related quality of life in patients with periodontitis attending combined Military Hospital, Lahore. PhD thesis, Universiti Sains Malaysia.

Attah, Obande Godwin (2022) Development of reverse transcription loop-mediated isothermal amplification for rapid detection of Sars-Cov-2. PhD thesis, Universiti Sains Malaysia.

Awang, Noor Azlina (2022) Forensic investigation of methamphetamine tablets using physical and chemical profiling. Masters thesis, Universiti Sains Malaysia.

Chandra, Changmai Manah (2022) Investigation of brain tumour patients with headache and non-headache phenotypes using sequences of MRA, MRS and DWI techniques. PhD thesis, Universiti Sains Malaysia.

Faizal, Nur Fazlin Akmal Muhammad (2022) Cytokines expression in primary and non-primary maternal cytomegalovirus (CMV) infection. Masters thesis, Universiti Sains Malaysia.

Ghazali, Siti Zulaiha (2022) Investigation of ethanol, acetone and aqueous azadirachta indica A. Juss (NEEM) extracts against plasmodium falciparum. Masters thesis, Universiti Sains Malaysia.

Hafizi, Ezanaton Nisar Omar (2022) The predictors for high-quality embryos for advanced age women undergoing intracytoplasmic sperm injection cycles in Hospital USM Fertility Unit. Masters thesis, Universiti Sains Malaysia.

Hamad, Wan Nur Fadilla Wan (2022) Antibacterial polymethylmethacrylate (PMMA)/ beta tri calsium phosphate/ zinc oxide composites for craniofacial reconstruction. PhD thesis, Universiti Sains Malaysia.

Hanafi, Wan Soliha Wan Mohd (2022) Development and validation of questionnaire to assess perceptions and attitudes towards intimate partner violence among premarital young adults in Kelantan. Masters thesis, Universiti Sains Malaysia.

Huda, Foujia (2022) Comparative efficacy of visuomotor behaviour rehearsal, biofeedback and combined interventions in performance of young athletes in East Coast of Malaysia. PhD thesis, Universiti Sains Malaysia.

Huda, Syed Nazmul (2022) Microrna expression profiling in tears of children with vernal keratoconjunctivitis. Masters thesis, Universiti Sains Malaysia.

Ibtisam M M, Dwikat (2022) Mistreatment of women during childbirth in West Bank, Palestine : development and validation of questionnaire, prevalence and associated factors, and its relationship with satisfaction and perceived quality of care. PhD thesis, Universiti Sains Malaysia.

Ismail, Che Muhammad Khairul Hisyam (2022) Transcriptional analysis and immunological characterization of iron uptake receptors of shigella flexneri 2a USM clinical isolates. Masters thesis, Pusat Pengajian Sains Kesihatan.

Ismail, Nur Raihan (2022) Prevalence and exploration of factors associated with instrumental activities of daily living disability among elderly in Kelantan : a mixed-methods study. Masters thesis, Universiti Sains Malaysia.

Jamaludin, Nazatul Izzati (2022) The mechanism of dynamic knee valgus and the concurrent validity and reliability during single leg squat in physically active females. Masters thesis, Universiti Sains Malaysia.

Jaya, Fatin Arryana Nasution Karta (2022) Mobile health application for breast examination awareness using health belief model. Masters thesis, Universiti Sains Malaysia.

Khalid, Tengku Noor Farhana Tengku (2022) Development and effectiveness of tuberculosis risk score for smokers in tuberculosis screening uptake and detection. Masters thesis, Universiti Sains Malaysia.

Muhamad, Hartini (2022) Development, validation and evaluation of pro-dips to improve quality of patient care for total knee replacement patients. PhD thesis, Universiti Sains Malaysia.

Muhamad, Siti Nur Husna (2022) Elucidation of clinical, environmental and T helper 2 factors on tight junction expressions in allergic rhinitis. Masters thesis, Universiti Sains Malaysia.

Nazori, Mohd Nazir Mohd (2022) The role of health self-efficacy, health assertiveness, and risk perception on the relationship between vaccination knowledge and vaccination intention. PhD thesis, Universiti Sains Malaysia.

Ngah, Hamiza (2022) Validation of a Malay version of knowledge, attitude, and practice towards safe working in a confined space questionnaire and respiratory health problems among confined space workers of water services industry in the Central Region of Malaysia. Masters thesis, Universiti Sains Malaysia.

Nor, Nor Asiah Muhamad (2022) Evaluation of anti-diabetic activity of etlingera elatior flower (bunga kantan) aqueous extract in rat with type 2 diabetes mellitus induced by high-fat diet and streptozotocin. Masters thesis, Universiti Sains Malaysia.

Othman, Muhammad Zulfadhli (2022) The effects of zolpidem on spatial memory, cellular and ionic co-transporters (KCC2/NKCC1) in the hippocampus of lithium-pilocarpine rat model. Masters thesis, Universiti Sains Malaysia.

Othman, Zaidatul Akmal (2022) Effect of bee bread on cardiovascular changes in obese male rats. PhD thesis, Universiti Sains Malaysia.

Quadri, Mir Faeq Ali (2022) Oral health status and its impact on academic performance of young adolescents in Jazan, Saudi Arabia. PhD thesis, Universiti Sains Malaysia.

Rahim, Marhasiyah (2022) Effects of low energy extracorporeal shockwave therapy on graft incorporation, bone metabolism, pain level and knee functions in individuals with post anterior cruciate ligament reconstruction. Masters thesis, Universiti Sains Malaysia.

Rahman, Md Toufiqur (2022) The influence of different ethnicity in Malaysia on parental preference towards behaviour management techniques in paediatric dentistry. Masters thesis, Universiti Sains Malaysia.

Ramzan, Muhammad Sirri 'Ammar (2022) Prevalence of noise-induced hearing loss and the efficacy of a targeted intervention method to promote the use of hearing protection devices among palm oil mill workers in Pahang. PhD thesis, Universiti Sains Malaysia.

Rashid, Mohammed Fadhil (2022) In vitro comparison of early occlusal enamel caries detection and remineralisation using ICDAS II and diagnodent pen in permanent posterior teeth. Masters thesis, Universiti Sains Malaysia.

Razak, Wan Adibah Nadiah Abd (2022) Cognitive Changes In Stroke Patients Following Robotic Rehabilitation. Masters thesis, Universiti Sains Malaysia.

Sadiq, Nabeesathul Sumayya Mohamed (2022) Determination of xylazine in drug-spiked drinks using gas chromatography for forensic investigation. Masters thesis, Universiti Sains Malaysia.

Sahabuddin, Farhah Nadhirah Aiman (2022) Biomechanics of single leg squat in physically active females: influence of dynamic knee valgus and exercise intervention. Masters thesis, Universiti Sains Malaysia.

Said, Mohamad Zarudin Mat (2022) The effectiveness of structured intervention programme for stroke (sips) in improving stroke awareness and reducing stroke risk among adult population in Malaysia: a cluster randomised controlled trial. PhD thesis, Universiti Sains Malaysia.

Saisahas, Kasrin (2022) Development of portable electrochemical sensor in detecting xylazine for forensic investigation. Masters thesis, Universiti Sains Malaysia.

Salisu, Baha’uddeen (2022) Characterisation of aspergillus section flavi and development of aflatoxins level detection methods in food grains and poultry feeds from Malaysia and Nigeria. Masters thesis, Universiti Sains Malaysia.

Shafie, Anis Syahirah Mohd (2022) The role of tualang honey in modulating nociceptive responses in the thalamus of rapid eye movement (REM) sleep deprivation rat model. Masters thesis, Universiti Sains Malaysia.

Shahrir, Nurul Farehah (2022) Factors associated with suboptimal gestational weight gain (GWG) among pregnant women in Selangor : a mixed method study. PhD thesis, Universiti Sains Malaysia.

Shirin, Lubna (2022) Craniofacial anthropometry, skull bone thickness and intracranial volume changes in epileptic patients. PhD thesis, Universiti Sains Malaysia.

Toorabally, Bibi Zaybnab (2022) Development of nutrition and lifestyle intervention modules and its effectiveness among working adults with metabolic syndrome in mauritius. Masters thesis, Universiti Sains Malaysia.

Yamin, Dina Hussein Marzouq (2022) Clinical epidemiology and development of novel multilocus sequence typing scheme for candida parapsilosis associated with catheter-related bloodstream infections. PhD thesis, Universiti Sains Malaysia.

Zahali, Zunura'in (2022) Association between vitamin d and obesity related adipokines with breast cancer occurrence among women patients in Kelantan. PhD thesis, Universiti Sains Malaysia.

Zulkipli, Ninie Nadia (2022) Elucidating the effects of mTOR inhibitors from Malaysian natural products on tuberous sclerosis complex cell line. PhD thesis, Universiti Sains Malaysia.

Dataset

Ahmad, Nur Syamsina (2022) Data of Effects of Combined L-Carnitine Supplementation and Moderateintensity Exercise on Body Composition, Metabolic and Oxidative Stress Markers, Bone Parameters and Muscular Performance in Overweight and Obese Individuals. [Dataset] (Submitted)

Teaching Resource

Awam, Pusat Pengajian Kejuruteraan (2022) EAG141 – Geology for Civil Engineers Duration: 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG245 – Soil Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG345 – Geotechnical Analysis Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG444 – Soil Stabilisation and Ground Improvement Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAH221 – Fluid Mechanics for Civil Engineers Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAL337 – Pavement Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAL431 – Highway Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP315 – Wastewater Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP415 – Solid Waste Management Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP581 – Water Supply Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP582 – Wastewater Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP583 – Air and Noise Pollution Control Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP584 – Environmental Impact Assessment Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP585 – Solid and Hazardous Waste Management Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS151 – Statics and Dynamics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS153 – Civil Engineering Materials Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS253 – Theory of Structures Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS353 – Reinforced Concrete Structural Design I Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS451 – Timber and Masonry Engineering Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS457 – Structural Steel Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS661 – Advanced Structural Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS662 – Structural Retrofitting Technology Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS663 – Dynamics and Stability of Structures Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EUP501 – Engineering Management Duration : 2 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMC301 – Measurement & Instrumentation Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EME 422 – Energy Conversion System (Sistem Penukaran Tenaga). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EME 451 – Computational Fluid Dynamics Duration : 2 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EME 452 – Tribology (Tribologi). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EME431 – Refrigeration and Air Conditioning Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EME432 – Internal Combustion Engine (Enjin Pembakaran Dalam). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH 211 – Thermodynamics Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH 222 – Fluid Dynamics (Dinamik Bendalir). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH 441 – Heat Transfer Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH102 – Fluids Mechanic. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH341 – Applied Thermodynamics Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM 102 – Statics. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM 252 – Engineering Dynamics (Dinamik Kejuruteraan). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM101 – Engineering Mechanics Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM213 – Strentgh of Materials Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM331 – Solids Mechanics Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMT211 – Engineering Probability & Statistics Duration : 4 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EMT212 – Computational Engineering (Kejuruteraan Pengkomputeran). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPC431 – Robotic and Automation Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPE401 – Artificial Intelligent in Manufacturing (Kecerdikan Rekaan Dalam Pembuatan). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPE421 – Ergonomic and Industrial Safety Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPE431 – Project Management Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPE462 – Industrial Machine Vision Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM201 – Engineering Economy Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM212 – Metrology and Quality Control (Metrologi dan Kawalan Kualiti). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM321 – Manufacturing System Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM331 – Management in Engineering Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM451 – Computer Integrated Manufacturing Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP201 – Manufacturing Technology I Duration : 3 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP212 – Advanced Manufacturing Technology (Teknologi Pembuatan Termaju). [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP331 – Manufacturing Technology II Duration : 2 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP351 – Advanced Manufacturing Process Duration : 3 hours. [Teaching Resource] (Submitted)

This list was generated on Mon Dec 5 03:07:18 2022 +08.
Share