Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Library of Congress Subject Areas (3172)
- T Technology (3172)
  - TA Engineering (General). Civil engineering (General) (3172)
    - TA1-2040 Engineering (General). Civil engineering (General) (1687)
    - TA1001-1280 Transportation engineering (22)
    - TA1501-1820 Applied optics. Photonics (5)
    - TA165 Engineering instruments, meters, etc. Industrial instrumentation (1)
    - TA166-167 Human engineering (1)
    - TA168 Systems engineering (4)
    - TA170-171 Environmental engineering (13)
    - TA174 Engineering design (5)
    - TA177.4-185 Engineering economy (5)
    - TA190-194 Management of engineering works (7)
    - TA2001-2040 Plasma engineering. Applied plasma dynamics (1)
    - TA329-348 Engineering mathematics. Engineering analysis (25)
    - TA349-359 Mechanics of engineering. Applied mechanics (49)
    - TA357 Fluid mechanics (21)
    - TA401-492 Materials of engineering and construction. Mechanics of materials (466)
    - TA404 Composite materials (146)
    - TA417.2 Non-destructive testing (4)
    - TA495 Disasters and engineering (2)
    - TA501-625 Surveying (2)
    - TA545.H216 Surveying & Engineering (4)
    - TA630-695 Structural engineering (General) (32)
    - TA683.9.L431 Prestressed concrete (11)
    - TA703-712 Engineering geology. Rock mechanics. Soil mechanics. (27)
    - TA800-820 Tunneling. Tunnels (1)

Group by: Creators | Item Type

Number of items at this level: 667.

Article

Abd Razak, Dzulkifli (2008) The next greatest engineering challenge. New Sunday Times.

De’nan, Fatimah and Hashim, Nor Salwani and Lim, Cheng Kuan (2020) The structural efficiency of tapered steel section with perforation under lateral torsional buckling behaviour. World Journal of Engineering, 17 (6). pp. 845-858. ISSN 1708-5284

Monograph

A.Majid, Taksiah and Choong , Kok Keong and Lau , Tze Liang and Zaini, Shaharudin Shah (2014) Ductility Demands Of Inelastic Structures Affected By Repeated Earthquakes. Project Report. Universiti Sains Malaysia. (Submitted)

Ab. Ghani, Anuar (2006) Kajian Kesan Pencemaran Bunyi Kenderaan Bermotor Di Kawasan Parit Buntar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abang Abdullah, Dayang Norehan (2006) RCC Dam Design Concept Of The Sungai Kinta Dam (SKD) Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abd Rahim, Siti Aini Nabilah (2018) The Effectiveness Of Deoderatex Membrane Treatment Of Odour At Toilet In Vertical Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abd Wahab, Muhd. Firdaus (2006) Perbandingan Keberkesanan Penggunaan Lintasan Pejalan Kaki Isyarat Kawalan Masa Tetap Dan Butang Tekan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abd. Manaff, Liana Syafinaz (2005) Diurval Variation Of PM10 And Carbon Monoxide Concentrations In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdrabou, Youssef Salaheldin Hegazy (2022) Effectiveness Of Waiting Area For Motorcyclists At Signalized Intersection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Hamid, Nur Fatin Najiyah (2018) Assessment Of Road Traffic Noise At Residential Area In Nibong Tebal, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Rahman, Hasliza (2005) Digital Image Analysis Of Cracks In Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Rahman, Nazrul Nizam (2005) Peramalan Kedalaman Keruk Di Sekitar Pier Mengunakan Kaedah Regresi Linear Berganda. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Rahman, Siti Rahimah (2005) Kesan Ketebalan Lapisan Ke Atas Kebolehtelapan Dan Kekuatan Ketegangan Tak Langsung Asflat Berliang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdul Wahid, Abdul Musawir (2006) Piling Induced Ground Vibration Observation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Noor Hazalina (2006) Kajian Tarif Air Untuk Beberapa Negeri Di Utara Semenanjung Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Nooraishah (2006) Development Of Digital Imaging Technique For Mapping Concrete Crack. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Siti Najwa Contingency Plan For Managing Slope-Related Risks A Case Study For Menora Tunnel In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Siti Nur Shafiqah Rosslan (2022) Biosorption Of Colour In Landfill Leachate By Using Base Pre-Treatment Hydrilla SP. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abu Bakar, Azly Zaherman (2006) Mengukur Kekuatan Tanah Laterit Menggunakan Kaedah Proctor, CBR, Proba Mckintosh Dan Piezocone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abu Bakar, Norafizal Zuraidin (2006) Kajian Corak Pembuat Perjalanan Ke Pusat Membeli Belah Di Seberang Perai Selatan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abu Bakar, Siti Nurwajihah (2018) Treatment Of Landfill Leachate By Palm Oil Waste Carbon Copper-Oxide Nano Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adenan, SSaidatul Husna Mohamed (2017) Experimental Investigation Of Pedestrian Flow Through A Corridor With Corner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adha, Nor Amelia (2017) Cost Comparison Of Seismic Design For Reinforced Concrete Building Under Ranau Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adnan, Raja Asyraf Azizan Raja (2021) Rock Mass Surface Roughness Characterization Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Affendi, Ahmad Zaid Ahmad (2022) Removal Of Pharmaceutical Compounds Using Photocatalysis On Ferric Oxide Doped Titanium Dioxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahamad Lazin, Nur Fajrina (2018) Manganese Removal From Synthetic Wastewater Using Pyrolyzed Chicken Feather Fiber (PCFF). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Azwan (2005) Permodelan Untuk Data Taburan Hujan Menggunakan Arcview3.2. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Farina Aisyah (2022) Ranking Of Preferred Criteria Of Floor Finishes For Bathroom By The House Owner In East Coast Of The Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Nik Aisyah Sofea Nik (2019) An Experimental Investigation On Pull Through Failure Of Roof Cladding To Purlin Connection Considering Overhang Roof. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmad, Ramlah (2005) GIS Smart Mapping Technique For Urban Spatial Pattern Analysis - A Case Study On Nibong Tebal Sub-District. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahmadi, Asma' (2021) Rock Mass Discontinuity Characterisation Using Image Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aidy, Siti Hajar Noor (2017) Seismic Evaluation Of Low To Meduim Rise Of Regular Rc Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akashah, Muhammad Amirul (2017) Productivity Of Construction Projects With Industrialized Building System (IBS) Technology Adoption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akma, Nur Farahiza (2022) Adsorption Treatment Of Pulau Burung Sanitary Landfill Leachate Using Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alexander, Yeo Ming Ming (2017) Development Of A Numerical Model For The Simulation Of Mudflow Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ali, Abdul Safiq Mohamed (2022) A Study Of Flow Induced Vibration At Hydraulic Physical Modellingof Kenyir Dam Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alias, Ahmad Danish Ab (2021) Microstructural Characteristic Of Lateritic And Marine Clay Soil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Allias, Muhammad Afiq Na’imullah (2022) Development Of Integrated 3-Dimensional And Virtual Reality Digital Outcrop Model Of Sedimentary Rock Slope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Amat Sihab, Noorazlan (2006) Pembangunan Lengkung Kadar Pengangkutan Endapan Menggunakan Fluvial-12. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aminuddin, Yasmin (2022) Biosorption Of Colour In Landfill Leachate Using Raw Hydrilla Sp. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Anuar, Auji Aseela (2022) Study On Indoor Particulate Matter (Pm2.5) In Hostel Rooms Of Universiti Sains Malaysia Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Apilin, Nur Shuhada (2017) Effect Of Polypropylene Fiber On The Properties Of Mortar Containing Silica Fume. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ares, Mohammad Danial Farhan Mohamad (2022) Correlation Of Schmidt Hammer Rebound Numbers And Knocking Ball Stiffness Parameters For Sedimentary And Metasedimentary Rocks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Arshad, Mohd Rashwan (2005) Rekabentuk Bangunan Pejabat Dua Tingkat Dengan Menggunakan Staad-iii Dan Secara Manual. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Arumugam, Harshaan (2022) Preliminary Assessment On The Distribution Of Heavy Metal Within Chenaam Estuary Using Gis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ashgul, Aishahturizdah (2005) Pollutant Removal Capability Of An Ecological Swale. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Asmuni, Noredah (2006) Penurunan Risiko Banjir Menggunakan Kolam Takungan Kering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Awang Redzuan, Awang Zaideladha (2005) Usm New Hostel (Desasiswa Tekun) Slope Stability Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Awangku Ibrahim, Dayangku Kamisah (2005) Temporal Relationship Between Particulate Matter (PM 10) And Sulphur Dioxide (SO2) In Developing Town In North Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azami, Nor Hafilia (2018) Rainwater Harvesting System For Surau An-Nur, Taman Pekaka, Nibong Tebal, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhani, Aidatul Aznuraini Aidil (2022) Determination Of Bukit Merah Reservoir Capacity Using Sequential Peak Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhar, Muhamad Syahmi (2018) The Influence Of Damages On The Static Performance Of Single-Layer Cable Net Structure Supported Glass Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Fatin Nur Ayuni Abd (2017) Ground improvement method using rubber shredded and acrylonitrile butadiene styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Muhammad Khuzaimi (2019) Assessment Of Diluted Methanol As A Foaming Agent In Latex Modified Asphalt Mixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azizan, Muhammad Hafiz (2005) Pengurusan Kecacatan Bangunan Kediaman Kos Rendah Yang Telah Siap Dibina Dan Kesannya Ke Atas Penghuni Di Daerah Seberang Perai Selatan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azman, Intan Halawati Syamimi Nor (2021) Soil Characteristics Using Borelogs Database For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azman, Nur Athirah Nor (2022) Kinetic Aggregation And Settling Properties Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Synthetic Wastewater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Aniq Syahmi (2022) Identification Of Effective Technique To Estimate Water Loss In Water Supply Scheme A Case Study Of Usm Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Nur Najihah The Assimilation Of Islamic Values In Driving Behaviour To Reduce Road Accidents In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Nur Syazana (2022) The Incorporation Of Multi-Lane Free Flow System Need Analysis And Challenges. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aznan, Noor Nabila (2019) Effect Of Shredded Recycled Powder Free Latex Gloves On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bahari, Mohamad Taqif Saipol (2022) Numerical Investigation On The Effect Of Wind Pressure On Skillion Roof Using Computational Fluid Dynamics (Cfd). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Baharin, Lailatus Syarah Kamarol (2019) Development Of Uv Light And Water Filtering System During Flooding Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Baharudin, Fauzi (2005) Characterization Of Spatial Variability Of Soil Nutrients At USM Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bahron, Busra (2005) Perbandingan Ciri Konkrit Asfalt Yang Dihasilkan Melalui Proses Basah Dan Proses Kering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bakar, Amir Syazwan Abu (2022) Mechanical Properties Of Concrete With Different Types Of Glass Waste As Cement Replacement Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bakar, Mat Zahir (2005) Kesan Pendedahan Udara Terhadap Mortar Berpolimer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bashah, Siti Fatin Qhalilah Osman (2017) Assessment Of Damage Index For Reinforced Concrete Frames Subjected To Seismic Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Basri, Siti Aisyah Ahmad Technical And Non-Technical Effect Of Disaster That Are Relevant To Disaster Risk Management Cycle (DRMC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Beddu, Salmia (2006) Membuktikan Anggapan Analisa Geoteknik (Tekanan Sisi Tanah) Menggunakan Model Fizikal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Benjamin, Luke Jetie (2003) Kajian Rekabentuk Rumah Banglo 2 Tingkat Menggunakan Konkrit Terubahsuai Polimer Lateks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bujang, Mohamad Nizamhadi (2006) Slope Stability At Km 50.0, Teluk Bahang, Pulau Pinang Using Resistivity Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bukhori, Muhammad Azzim (2017) Activated Carbon, Limestone And Alginate As A Composite Adsorbent For River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chai, Chen Chu (2006) Conceptualization, Design And Erection Of A Small Scale Cable-Dome Structure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Fun Sin (2006) An Investigation On The Properties Of Ferrocement Containing Different Layers Of Wire Mesh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Han Pin (2005) Experimental Study On Effect Of End Plate Thickness On Moment Capacity And Failure Mode Of RC Square Pile Joints. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Shen Sam (2006) Soil Infiltration Variability Mappping: Kuala Lumpur. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Wai Kit (2018) Parametric Study On The Effectiveness Of A Novel Flat Truss Shape Punching Shear Reinforcement Using Finite Element Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chan, Yi Zhe (2021) Evaluation Of Crack On Arch Structures Using The Digital Image. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Che Hussin, Mohd Herzi (2006) Kekuatan Tanah Campuran (Tanah Laterit Dengan Kandungan Pasir Tertentu) Diuji Dengan Menggunakan Kaedah Macintosh, Piezocone, Ketumpatan Di Tapak Dan Ketumpatan Relatif. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Che Kamahrudin, Puteri Nihal (2018) Assessment Of Seismic Scenario-Structure-Based Limit State Criteria For 23-Storey Of RC High-Rise Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Che Nen, Akhtarul Norfaiza (2006) Pembuktian Anggapan Analisa Geoteknik (Pergerakan Tanah) Menggunakan Model Fizikal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Yi Ben (2018) Determination Of Ground Structure Using Microtremor Array Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Zu Yi (2018) Flexural Capacity Of Ultra-High Performance Fibre Reinforced Concrete (Uhpfrc) Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chen, Fook Keong (2004) Kajian Mengenalpasti Kecacatan Pada Anggota Struktur Bangunan Kayu Sediada. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheng, Kai Lee (2005) A Study Of Sulphate Attack Resistant On Fired Clay Masonry Units. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheng, Kok Leong (2006) Appraisal Of Sediment Transport Equations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheong, Moon Fu (2005) Effect Of Rooftop Rainwater Harvesting Storage Orientation On The Stability Of A High Rise Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chew, Soo Kean (2005) Comparison Between Pipe System And Bioecods System By Using Storm Water Management Model (SWMM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chew, Teck Yeow (2006) Development Of Sediment Transport Equation For Rivers In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chin, Wai Yet (2005) Structural Assessment For A Three Storey Building Under Different Usage Using S-Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ching, Meng Xuan (2021) Influence Of Treated Recycled Aggregates As Partial Aggregate Replacement On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chong, Hong Rui (2018) Comparative Study Of Bs8110 And Eurocode 2 Standards For Design Of A Factory Reinforced Concrete Flat Slab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chong, Jia Wei (2021) Calibration And Validation Of Vissim Simulation A Case Study Of Priority Bus Lane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Choong, Kok Keoang Estimation Of Probable Earthquake Ground Motion In Peninsular Malaysia. Working Paper. Universiti Sains Malaysia, 216. (Submitted)

Chua, Chun How (2005) Cost Effectiveness In The Construction Of Terrace Houses By Using Raft Foundation & Concrete Masonry Unit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chuah, Hoi Ching (2018) Comparison Between Bs 5950 And Eurocode 3 For The Design Of Pre-Engineered Steel Structure Of A Factory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Damanhuri, Nur Amira Nadia (2018) Effectiveness Of Coagulationflocculation Process For The Removal Of Chemical Oxygen Demand (Cod), Color And Suspended Solid In Industrial Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Daniel, Lim Wei Ping (2022) Effect Of Consideration Of Seismic Design On Cost Increase Of Regular Layout Reinforced Concrete High Rise Buildings In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dasthagir, Nur Hidayah (2022) Soil Stabilization Method By Using Natural Bamboo Fibre. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Daud, Nur Aina Syamilah (2022) Landfill Leachate Treatment By Coagulation Flocculation Using Tween80. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Derani, Mohamad Ansar (2005) Flow Characteristic Of Wetpond. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dinail, Nurul Juliyana (2017) Determination Of Mannings Coefficient For Modular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Effendi, Nurul Farah Syafiqah Mohd (2022) Geospatial Mapping Of Selected Heavy Metals Based On Land Use Within Kinta River Catchment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ehsan, Nurul Syazwani Mohamad (2017) An Experimental Study Of Natural Frequency Of Damaged Cable Net Supported Facade Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Er, Eng Kien (2006) Activated Carbon Aided Alum Coagulation For Removal Of Textile Dye From Dye Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fadzil, Nurul Farahanes Mohd Evaluation Of Tannin As Natural Coagulant For Pulp And Paper Mill Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Unpublished)

Faisal, Farhanah (2018) An Investigation On Stress Concentration Of Point-Fixed Bolted Glass System Subjected To Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faizal, Muhammad Ikhlas Saufi Mohd (2019) Assessment Of Water Quality In High-Rise Residential Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Farouk, Mohamad Zulhilmi (2017) The Efficiency Of A Depressed Gully Inlet Of A Malaysian Drain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faudzi, Liyana Mohd (2021) Nutrient Removal Of Tropical Bioretention System In Treating Polluted Runoff A Pilot Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faudzi, Siti Multazimah Mohamad (2017) 2D Simulation Of Sultan Abu Bakar Dam Release Using HEC-RAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fauzi, Nur Alia Ahmad (2022) A Systematic Literature Review Bending Failure In Cold-Formed Steel Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Fuad, Khairul Ikhwan Mohd (2021) Evaluation On The Properties Of Aggregate Subjected To Elevated Temperature Using Ncat Ignition Oven And Asphalt Mix Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gan, Ka Jing (2018) A Study On The Effect Of Overfill Design On The Structural Behaviour Of Precast Concrete Closed Spandrel Arch Bridge. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghani, Ahmad Danial Kahfi (2018) Flood Hazard Map Of Sungai Kulim Using High Percentage Of Overlapping Images Captured By (UAV) Drone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghazali, Anis Hanim (2022) Empirical Model Of Shear Force Capacity And Stiffness Of Shear-Tension Screw Connections In Timber-Concrete Composite Structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghazali, Nurul Adyani (2005) Temporal Relationship Between Particulate Matter (PM10) And Carbon Monoxide (CO) In Kuala Lumpur. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghozali, Noraini (2018) Experimental Investigation On Pedestrian Behaviour Walk In Inundation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Goh, Kim Meng (2006) Infiltration Characteristics Of Tropical Soils At USM Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Goh, Xiao Wen (2017) Effects Of Aging Condition, Preconditioned Temperature And Anti-Stripping Agent On The Adhesive And Cohesive Behaviour Of Asphalt Binder And Mastics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Govindasamy, Darvintharen (2017) A Study On The Suitable Compaction Method For Physical Slope Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gun, Yin Farn (2006) Removal Of Textile Dye By Electrochemical Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gunasegar, Denesh (2017) Green Kerb – Green Technology Technique In The Development Of Alternatives Kerb Using Old Tire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gusman, Muhammad Hashim Habibie Arif (2021) Biochar Amendment On Palm Oil Biomass Effect On Physicochemical Properties And Fibre Degradation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Habib, Mohammad Faizul Aman Mohammed (2022) Mapping The Walkability Of Main Campus, Universiti Sains Malaysia Using Geographic Information System (Gis). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hadi, Muhammad Muhaimin Azhad Noor (2022) The Assessment Of Fire Risk Rating Based On Uniform Building By-Law (Ubbl) For Buildings In Usm Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hakim, Raul (2022) A Systematic Literature Review(Slr) On The Utilizationof Ultra-High Performancefibre-Reinforced Concrete(Uhpfrc) For Repair And Strengthening Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Halid, Nur Fatin Hanani Mohd (2017) Formation Of Trihalomethanes In Surface Water And Groundwater By Using Chlorine And Chlorine Dioxide As Disinfectant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hameed, Azreen Arifah Shahul (2022) The Role Of Road Safety Inspection Towards Ensuring Forgiving Roads In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamid, Nur Haziqah Mohd (2017) Prediction Of PM10 Using Multiple Linear Regression And Boosted Regression Trees. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamidi, Muhammad Azfar (2022) A Study On The Effect Of Spur Dike On The Formation Of Sand Bar In A Rectangular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamim, Nur Syafiqah (2021) Rainfall - Runoff Modelling For The Batu Kurau River Basin Using Hec-Hms Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Harun, Azimah (2006) The Relationship Of Static Work Toward Muscle Fatigue And Fatigue Recovery Rate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hassan, Nur Munira (2017) Seismic Analysis Of Irregular Reinforced Concrete Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hassan, Siti Amirah Abu (2019) A Study Of Flow Characteristics At Stilling Basin Of Tawau Dam Spillway, Sabah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hau, Sze Chern (2005) Kajian Kesan Halangan Ketika Bas Berhenti Terhadap Kadar Aliran Tepu Dipersimpangan Lampu Isyarat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hazri, Muhammad Hadi (2022) Prediction Model of Shear Force Capacity and Stiffness of the Connections in Timber-to-Timber Composite structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hipeny, Alya Batrisyia (2022) Procedural Effects On Controlling Natural Disasters (Landslides And Flash Floods) Based On Environmental Degradation From Development In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ho, Kar Meng (2019) Dynamic Characteristics And Seismic Performance Of Reinforced Concrete Buildings Experiencing 5 June 2015 And 8 March 2018 Sabah Earthquakes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Humayunkabir, Sheikh Hazwan (2017) Experimental Investigation On The Load Carrying Capacity Of Modified Purlin To Rafter Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Husain, Sharmira (2022) Thermal Comfort & Its Relation To Ventilation Approaches In The Main Prayer Hall Of Mosque & Hostel Room, USM Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Mohd Zakry (2005) Kesan Penggunaan GGBS Terhadap Kekuatan Mampatan, Keliangan Dan Kebolehtelapan Konkrit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Nor Azlin Ali @ (2017) Verification Of CPTU Soil Types By USCS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Nur Asyraf (2021) Removal Escherichia Coli From Sewage Using Combination Of Electrocoagulation And Ultrasonic Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Idris, Nurul Najihah Mohd (2022) The Efficiency Of Landfill Leachate Treatment By Adsorption Process With Biochar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Idrus, Mohd Firdaus Ahmad (2022) The Decomposition Process Of Food Waste For Organic Fertilizer Production At Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isa, Azyrul Haffiz Mat (2017) Gated Spillway Hydraulic Modelling Of Sultan Abu Bakar (SAB) Dam And The Gated Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isa, Nurfazlina (2022) Evaluation Of Sediment Transport Equation In Southeast Asia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ishak, Nurfaizahwati (2006) Evaluation Of Post EIA : Water Quality Due To The Construction Of The Sungai Kinta Dam Project, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Hafizahizzati (2017) Prediction Of PM10 Concentration Using Multiple Linear Regression And Bayesian Model Averaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Mohammad Fikri (2017) Effects Of Plastering And Glass Fibre Reinforced Polymer (Gfrp) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Nurul Jannah (2017) Probable Maximum Precipitation Estimation Using Statistical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Shaiful Bahari (2003) Penggunaan Ujian Teras Mikro Sebagai Satu Alternatif Ujian Konkrit Di Situ. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isman, Intan Shafinaz (2022) Flood Risk Mapping Using Ahp Method A Case Study For Meru, Klang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jaafar, Mohd Kamil (2006) Sifat Kejuruteraan Campuran Asfalt Tambah Getah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamaludin, Mohd Muzamil (2006) Kajian Keberkesanan Bonggol Jalan Dan Bar Melintang (Transverse Bar) Di Jalan Persiaran Gurney, Jalan Sempadan Dan Jalan Persiaran Pekaka. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamaludin, Nur Faizah (2022) Assessment Of Indoor Particulate Matter (Pm2.5) In Newly Renovated Rooms At School Of Civil Engineering Building , Usm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamberi, Aqilah (2017) Numerical Investigation On The Strengthening Work Of Transmission Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jawari, Muhammad Faiz Ahmad (2022) The Effect Of Roof Slope On The Wind Pressure Distribution Of A Low-Rise Mono-Pitch House Using Cfd Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jelani, Hafizzul Hazzim Shah (2022) The Potential Of Paddy Husk As Sound Absorber In Concrete Mixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jita, Japalan (2004) Keselamatan Dan Kesihatan Di Sebuah Kuari. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Unpublished)

Jumahat, Wan Nur Azlin Hanis (2019) Combination Of Coagulation-Ultraviolet Photocatalytic Treatment By Using Zinc Oxide With Polyarcylamide And Tannin For Removal Of Colour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Junit, Syarifah Nurhanani Syed (2017) Application Of Chitosan As A Natural Coagulant In Groundwater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kam, Pui Kuan (2017) Effects Of Anti-Stripping Additives On The Moisture Sensitivity Of Asphalt Mixtures Subjected To Several Conditioning Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamal, Nurzulaikha Mohd (2019) Application Of Computational Fluid Dynamics In An Outer Channel Of Orbal Biological System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaludin, Zulaikha (2006) Determination Of Bod Kinetics Coefficient (K1) For The Leachate Less Than 5 Years From Pulau Burong Landfills. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Kamaruddin, Muhamad Al-Amin (2017) Indoor Outdoor Relationship Of Fine Particles (PM2.5) IN School Classroom. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruddin, Nurain Soleha (2022) Impact Of Sand Mining On Sg. Perak River Morphology Using Geographical Information System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarudin, Ahmad Afif (2021) Assessment Of Sedimentation Process At Kenyir Dam River Using Hydraulic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarulzaman, Fasihah (2018) Development Of Sultan Abu Bakar Spillway Dam Rating Curves For Flood Mitigation Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruzaman, Nur Aini (2018) Managing Structure Related Risks For Highway Tunnelling Project In Malaysia A Contingency Plan For Menora Tunnel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarzaman, Fatin Farhana (2018) Removal Of Ammoniacal Nitrogen And Suspended Solids In Sewage Wastewater By Using Ferrous Sulfate In Coagulation Process Via Zeta Potential And Particles Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamisan, Ifa Shafiqa (2022) The Capability Of Gigantochloa Scortechinii Bamboo As Sound Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Karib, Muhammad Izzuddin Mohd (2022) Heavy Metal Distribution In Suspended Load And Bed Load At The Perai River. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kasehyani, Nur Hanis (2017) Effect Of Corner On Evacuation Behaviour During Building Egress By Using Dem-Based Multi Agent Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kasim, Mohd Yusof (2005) Kajian Kes Ke Atas Masalah Kecacatan Dan Keretakan Konkrit Di Empangan Hidroelektrik Stesen Janaelektrik Chenderoh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kassim, Maimunah Abu (2017) Variability And Rainfall Against Slope Failure For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khan, Muhammad Nasri Nasehir (2022) A Flow Pattern Study Of Temenggor Dam Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khazali, Aliff Izuddin (2021) Oxygen Uptake Rate As An In-Situ Indicator For Shock Loading Event At Sewage Treatment Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khian Meng, Poh (2005) Penentuan Ketumpatan Kering Tanah Menggunakan Bacaan Proba Mackintosh Dengan Mata Penusuk JKR. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khong, Chung Chiang (2006) Comparison Of The Structural Behavior Between Conventional Beam And Band Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khoo, Choon Bon (2004) Kesan Saiz Butiran Pasir Dan Taburan Saiz Butiran Pasir Terhadap Kekuatan Ricih Pasir. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khor, Cheng Yi (2021) Influence Of Oil Palm Fiber And Steel Fiber Inclusion On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khor, Hao Zhe (2021) Numerical Modelling Of Air Bubbles In Artificial Riffle Zone Using Flow-3d. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khudria, Nur Atiqah Mohamad (2017) Degradation Of Dyes (Methylene Blue) Using Natural Rubber Incorporated With Silver Nanoparticles In Water Treatment Tank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kua, Chin Tong (2017) Determination Of Flood Load On Bridge Deck. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kuan, Hui Myen (2006) A Computational Study About The Effect Of Surface Shape On Strength & Stiffness Of Tensioned Fabric Structures Under Wind Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kudubudin, Amirul Al-Amin Mohamed (2022) Effectiveness Of Coffee Residuals As Green Roof Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lai, Kong Soon (2005) Characterization Of Spatial Variability Of Soil Nutrients At Seberang Perai, Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lam, Jam Isnain (2005) The Effectiveness Of Plastic Formworks In Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lani, Anuar Effendy Mat (2017) Radial Gate Hydraulic Modelling Of Sultan Abu Bakar DAM, Cameron Highland. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lau, Ji Wei (2017) Seismic Fragility Assessment Of Moment-Resisting Concrete Frame With Setback Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Chin Jie (2017) Analysis And Simulation Of Pedestrian Walking Characteristic At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Kenth Zheng (2017) Shear Behaviour Of Perforated Cold-Formed Steel Section. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Mei Ting (2017) Engineering Properties Of Warm Mix Asphalt Incorporating Fly Ash. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Ngan Siew (2005) Physical-Chemical Removal Of Ammonia, Iron And Zinc From Semi-Aerobic Landfill Leachate By Zeolite And Limestone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Sze Yee (2018) Verification And Validation Of Buildingexodus Based On The Walking Speed Of People With Disabilities (PWD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Weoi Jye (2018) Removal Of Total Coliform, E. Coli, UV254, Particles, Total Dissolved Solids (TDS), Suspended Solids (SS), And Colour Using Zeolite And Activated Carbon Mixture In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Zheng Xian (2019) Effect Of Soil Grain Size On The Oil Migration In The Capillary Fringe Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leong, Lee Vien Investigation On Volume-Delay Functions For Arterial Roads. Project Report. Universiti Sains Malaysia. (Submitted)

Leong, Weng Chin (2005) User-Friendly Detention Pond Design Development Using Visual Basic 6.0. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leong, Weng Woh (2017) Behaviour Of Selected Criteria Air Pollutants During High Particulate Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leow, Cheng Siang (2006) Application Of AnnAGNPS Model For Soil Loss Estimation And Utrients Loading For Malaysian Conditions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Liew, Kam Wah (2005) High Strength Concrete Containing Silica Fume And Metakaolin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Cheng Kuan (2018) The Structural Efficiency Of Tapered Steel Section With Perforation Under Lateral Torsional Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Ewe Loon (2022) A Systematic Literature Review On The Efficiency Of Heat Reflective Asphalt Pavements To Reduce Urban Heat Islands. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Meng Kee (2005) Pengaruh Nisbah Air Simen Terhadap Kekuatan Konkrit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Teik Jin (2022) Effect Of Geometry On Stress In Pile Head Of Rc Sheet Pile Under Vertical Impact Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Wee Zheng (2018) Performance Of Rubberized Modified Asphalt Mixutres Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Yon Sheng (2017) Bending Behaviour Of Cold Formed Steel Structural Member With Perforated Section In House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Zen Yang (2019) Challenges And Benefits Of Implementing Green Building Technology In Building Construction Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ling, Chee Kiong (2006) Characterization Of Spatial Variability Of Soil Engineering Properties At USM Engineering Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Liow, Syuk Chin (2006) An Investigation On The Behaviours Of Buried Structural Arch Culvert With Varying Rise Span Ratio. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lock, Pui Yee (2018) The Efficiency Of Tapered Steel Section With Perforation Under Shear Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lopog, Ecrolien Liberty (2006) Fluoride Removal Using Alumina Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Louis Tan, Pao Chiang (2018) Study On The Traffic Impact Of Logistic-Related Land Use. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Low, Zhao Xuan (2018) An Investigation On Construction Sequence Of Irregular Multi-Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

M Poovaneshvaran, Sharvin (2018) Evaluation Of Crumb Rubber And Latex Modified Asphalt Binders For Pavement Crack Sealant Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Maenah, Mud (2022) Water Quality Index (Ammoniacal Nitrogen, Biochemical Oxygen Demand, Chemical Oxygen Demand) Assessment In Sungai Kereh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mah, Chia Ling (2017) The Behaviour Of LNAPL In Sand Due To Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mahat, Masita (2005) Penyelakuan Sistem Saliran Ribut Untuk Kompleks Industri Perai Menggunakan Storm Water Management Model (XP-SWMM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mahmoud, Mostafa Ahmed Sayed Ahmed (2022) Structural Behaviour Of Asymmetrically Designed Timber-Concrete Hybrid Buildings With Different Roof Materials Subjected To El Centro Earthquake Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mahyuddin, Muhammad Nurul Ihsan (2022) Effects Of Fly Ash As A Cement Replacement Material For Self-Healing Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Maizul, Elly Nur Myaisara (2018) Quantitative Analysis And Mapping Of Concrete Scanning Electron Microscope (SEM) Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Make, Chee Fong (2018) Effect Of The Vertical And Horizontal Web Reinforcement On Deep Beam With Strut-And-Tie Model With Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Malek, Siti Norshafiqah Aini Abd (2021) Finite Element Analysis Of Bridge Girder Retrofitted By A Post-Tensioned Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Manoharan, Jegathisan (2019) Assessment Of Hook End Steel Fibre As A Substitute Material In High Performance Concrete Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marcdo, Jong Min Inn (2019) A Computional Study On Influence Of Circular Perforation In Web On Structural Capacity Of Reinforced Concrete Sheet Piles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Kamal Khairi Ahmad (2021) Improvement By Using Antifouling On Retaining Wall. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Noradila (2017) Study Of GAP Acceptance For Yield-Controlled Left-Turning Lane At Signalised Intersections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mat Kilau, Nurulhuda (2005) Ujian Model Gegaran Cerucuk - Kesan Parameter Kedalaman Penusukan Cerucuk. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Darom, Mohd Afizul (2006) Penyingkiran Pepejal Terampai, Kekeruhan, Aluminium, pH Dan Warna Menggunakan Sistem Pengapungan Udara Terlarut. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Nasir, Nurul ‘Ashikin (2004) Kajian Kemapanan Perkhidmatan Feri Di Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Razif, Muhammad Faiz Syazwan (2018) Removal Of Synthetic Methyl Orange DYE At Neutral pH BY NR-b-PVP/Ag Using Photodegradation Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Salleh, Shansharinatulazira (2005) Kajian Terhadap Kesan Pengudaraan Ke Atas Kualiti Fizikal Air Di Tasik Harapan, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Wakif, Sarah Alia (2018) Experimental Study Of The Hydraulic Efficiency Between A Depressed And A Non-Depressed Grate In Bandar Baharu, Kedah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md.Nor, Nuramalina (2018) Treatment Of Toilet Odor Using Horizontally Placed Odor Removal Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Meow, Lian Ke (2022) Engineering And Microstructural Characterization Of Marine Clay Treated With Cement And Lime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Merzuki, Muhammad Yusof (2017) Odour Emission From Palm Oil Mill With Different Effluent Treatment System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamad Nashuki, Nadia (2006) Analysis Of Medium Rise Reinforced Concrete Building Subjected To Lateral Loads. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamad Nor, Nur Atiqah (2018) Comparison Of Road Traffic Noise At Residential Areas In Nibong Tebal, Penang And Klang Valley. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamad Said, Mohd Nor Shahril (2005) Analysis Of Shell Structures In Nature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamad Tajudin, Nizar Alwi (2006) Performance Of GPS For Road Network Mapping And Analyzing Vehicle Position. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Ahmad Hakimi (2005) Peramalan Kedalaman Keruk Di Sekitar Pier Menggunakan Kaedah Regresi Teguh. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Nurul Atiqah (2017) Stress-Strain Response Of Full Scale Rubberized Reinforced Concrete Column Under Vertical Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed Izham, Aimi Syuhada (2018) Empirical Investigation Of Walking Speed For Bi-Directional Flow At Angled-Walkway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed Nordin, Fadhlia (2006) Pengurusan Program Kitar Semula Di Daerah Kerian, Perak Darul Ridzuan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ali, Siti Najihah (2018) The Implementation Of Motorcycle Junction Box To Reduce Motorcycle Accident Rate In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Jani, Fazilah (2006) Kajian Sistem Lampu Isyarat Dan Penggunaan Sistem ‘’Actuated’’. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Khairun Nizar Mohd Tajudin, Mohd Khairun Nizar Mohd (2017) Numerical Analysis Study Of Sarawak Barrage River Bed Erosion And Scouring By Using Smooth Particle Hydrodynamic (SPH). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Nazri, Fadzli (2005) Analisis Kerangka Portal Keluli Secara Manual Dan Perisian S-Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Nor Saidi, Nasruddien (2005) Keupayaan Penyusupan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Radzi, Ridza'uddin (2005) Kajian Terhadap Masalah Banjir Di Sungai Senam,Ipoh Berpandukan Manual Saliran Mesra Alam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ruzi, Nor Aerina Aerin (2018) Effect Of Horizontal Pattern On Masonry Prism Strengthened Using Carbon Reinforced Polymer (Cfrp) And Glass Reinforced Polymer (Gfrp). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Tadza, Mohd Yuhyi (2005) Leachate Using Cambination Of Chemical And Physical Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusoff, Nur Hayati (2018) Treatment Of Young Leachate Using Electrocoagulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusoff, Siti Nur Aishah (2018) Removal Of Solids, Total Coliform, E.Coli, UV254, Colour And Turbidity Using Limestone Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusri, Yushani Syafrina (2018) Sustainability Factors Influencing Industrialised Building System (LBS) Prospects For Post-Disaster Building Reconstruction From Productivity And Quality Aspects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd. Yusoff, Mohd. Firdaus (2006) Kajian Keberkesanan Sistem Lampu Isyarat ‘’Countdown’’. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohsin, Mohammad Nazeem (2018) Effect Of Silica Fume Inclusion On Properties Of High Strength Concrete Containing High Volume Of Steel Slag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Moreen, Daryl Justine (2018) Industrialised Building System (IBS) Quality Testing For Disaster Resilience From Technical And Non-Technical Perspectives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mudzrab, Fitri Mahamad (2017) A Study Of Building Automation System (Bas)- A Case Study At The School Of Civil Engineering, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Muhamad, Edy Mustaqim (2019) Assessment Of Noise Pollution Exposed To Workers In Furniture And Metal Factory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Muhammad, Hasmarini (2005) Kajian Terhadap Ciri-Ciri Enap Cemar Di Tasik Harapan, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Munusamy, Shanbagarani (2019) Assessment On Flow Characteristics Of Tawau’s Spillway Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Aidil Azami (2018) Study Of The Influence Of The Operational Parameters On The Removal Of Cod, Bod And Colour Of An Industrial Wastewater Treatment Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Muhamad Akmal (2005) Faktor-Faktor Yang Mempengaruhi Kekuatan Mampatan Terhadap Prisma Bata Tanah Liat Bakar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Nur Fatin (2017) Analysis On Distraction While Driving- A Case Study On Staffs And Students Of Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Zafira Nur Ezzati (2017) Buckling Capacity Of Cold-Formed Steel Structure Column Member With Perforation Section In Affordable House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustakim, Ainaa Shafirah (2022) A Study Of Aluminium Window Frames Preference Materials Among Property Buyers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustakim, Norhisham (2005) Erosion Potential Of Rainfall In Seberang Perai Area. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagalingam, Muvent (2022) Exploring The Application Of Radio Frequency Sensor At Signalized Intersections For Emergency Vehicles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagalinggam, Tanagaraj (2017) Treatment Of Palm Oil Mill Effluent Odour Using Biofilter From Compost And Wood Chips Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagarajan, Sarmila (2022) Critical Success Factors Of The Green Building Implementation In Malaysian Construction Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagendran, Sharan Kumar (2017) Rippability Assessment In Hilly Terrain Of Weathered Sedimentary Rock Mass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Najib, Muhammad Nauwar Amir (2022) The Influence Of Crystalline Admixtures Inclusion On Self-Healing Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nasaruddin, Norazura (2022) Adoption Of Green Building Technology (Gbt) In Managing Covid-19 Risk For Public Facilities Improvements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Naserun, Nur Izzati (2018) Disinfection By-Products Precursors Removal By Simultaneous Coagulation And Disinfection In River Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nathan, Pavanithan (2017) The Effect Of Aggregate Types On The Performance Of Asphalt Mixture Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazim, Muhamad Faiz Mohamad (2022) Evaluation Of Pre-Evacuation Behavior Among Students And Staff In Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazir, Amni Umirah Mohamad (2017) Relative Humidity And Temperature Effect On Biological Contaminant At Public Access Building In Seberang Perai Selatan, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Chun Hua (2018) Density And Permeability Properties Of Over Compacted Sands And Laterites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Han Tiong (2006) Fractal Characteristics Of Soils At USM Campus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Lit Phin (2022) The Advancement Of Energy Harvesting From Road Pavements A Systematic Literature Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Pei Pei (2005) Estimating The R-Factor With Limited Rainfall Data In Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nge, Jia Sheng (2019) Assessment On The Performance Of Asphalt Mixtures Prepared With Adhesion Promoters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ngo, Uk Doong (2022) Extending The Service Life Of Asphalt Pavements Via Phase Change Materials A Systematic Literature Review. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nizam, Ahmad Nikmall Syharifuddin Ahmad (2019) Chicken Feather Fibres As An Adsorbent In Treating Heavy Metal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nordin, Nuratikah Ahmad (2019) Effect Of Silica Fume On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nurdin, Muhammad Ezam (2022) Safety And Health Management At Construction Site Of Building Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Oh, Yong Ping (2006) Moringa Oleifera Seed As Coagulant And Coagulant Aid In Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Boon Heng (2006) Software Development For Regional Detention Pond Design Using Visual Basic 6.0 - Case Study On Sungai Air Salak Catchment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Ju Kit (2018) Mechanical Properties Of Reclaimed Asphalt Pavement Mixtures With Rejuvenator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Kai Qi (2022) Application Of Okra (Abelmoschus Esculentus) Mucilage-Based As Natural Coagulant In Domestic Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Khang Yoong (2006) An Investigation Of Traffic Induced Vibration Effect On Structure And Human Sensitivity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Zhi Jia (2017) An Investigation On Construction Sequence Of Irregular Single Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ooi, Jun Hao (2021) Determination Of Seismic Vulnerability Assessment By Using Rapid Screening Method Through Web-Based Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Othman, Muhammad Zaki (2022) Assessment Of Riverbank Stability In Perak River Induced By Unsustainable Sand Mining Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Paid, Norazilah Mohamed (2017) Reliability Of Rapid Penang Operation In Mixed Traffic Situation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Paul Teh, Ou Yang (2005) Safety Research On Workers At Construction Site. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Pauzi, Nurshelawati Mohd (2022) Adoption Of Industrialised Building System (Ibs) In Building Projects Based On Disaster Risk Management Cycle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Phua, Hui Chi (2021) Trends And Gaps On New Emerging Pollutants (Neps) In Landfill Leachate Over The Past 10 Years (2010-2020). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Poniran, Mohamad Hanif (2005) Kajian Ke Atas Penggunaan Acuan Kekotak Aluminium (Aluminium Formwork) Dalam Industri Pembinaan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Prakas, Kumaravelu (2017) Study On The Characteristic Of Marine Dredged Sediment At Lumut Using Admixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Puniran, Harun (2005) Fluoride Removal By Adsorption Using Oil Palm Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Puzi, Nurul Fathiha Mohd (2017) The Effect Of Location For On-Site Detention (OSD) On Peak Attenuation Using Stormwater Management Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Radzi, Fatin Nadia Mohamad (2021) Impact Of Covid-19 On Construction Industry From Contractor’s Perspective. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rahman, Nurul Natrah Abdul (2022) Characterization Of Coconut Husk As Adsorbent For Methylene Blue Dyes. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rahmat, Nur Syahirah (2017) Nephelium Lappaceum Seed As Natural Coagulant Flocculant For Landfill Leachate Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rakbi, Mohammad Firdaus (2018) Removal Of Phosphorus And Suspended Solids In Aquaculture Wastewater By Using Ferrous Sulphate In Coagulation Process Via Zeta Potential And Particle Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ramlan, Siti Nur Asifa (2017) Geochemical And Mineralogical Characteristics Of Selinsing Gold Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ramli, Nur Amanina (2018) Study Of PM2.5 Concentration At School Near Road Side In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ramli, Rohalina (2005) Kaedah Olahan Fizikal Menggunakan Campuran Media Zeolit Dan Batu Kapur Dalam Menyingkirkan COD Dan Warna Dari Larut Lesapan Semi-Aerobik Tapak Pelupusan Pulau Burung. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rasaik, Faisal (2005) Keadeh Olahan Fizikal Menggunakan Media Zeolit Dan Karbon Teraktif Dalam Menyingkirkan Amminia Dan Logam Berat (Ferum Dan Zink) Dari Larut Lesapan Semiaerobik Tapak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rashid, Anis Adriana Mohd (2022) Assessment Of Horizontal Migration Behavior Of Light Non-Aqueous Phase Liquid (Lnapl) At Capillary Fringe Due To Fluctuating Groundwater Table And Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rawawi, Rawaidatul Alifah Mohd (2022) Influence Of Microencapsulated As A Concrete Self-Healing Agent Containing Sodium Silicate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Razali, Sali Amirah (2018) Study On Mechanical And Thermal Properties Of Fired Clay Brick From Five Different States In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Razif, Mohammad Zahin Mohammad (2019) Estimating the reduction of carbon dioxide (co2) emission from private vehicles in penang island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ridzuan Ramli, Hannan (2006) Sifat-Sifat Konkrit Berkekuatan Tinggi Yang Mengandungi Abu Sekam Padi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rohaizad, Khairun Neesa (2021) Treatment Of Leachate Landfill By Adsorption Using Charcoal Waste From Acetylene Gas Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rohalim, Nurfatihah Idayu (2018) Determination Of Flood Inundation For Sungai Bertam By Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Roshar, Mohamad Syarees (2022) Influence Of Drop Size Distribution And Kinetic Energy In Laboratory Rainfall Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Unpublished)

Roslan, Muhamad Amir Idham (2022) Biosorption Of Colour In Landfill Leachate Using Acid Pre-Treated Hydrilla Verticillata. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Fatin Norliana (2021) Plant Study Of Portulaca Grandiflora In Green Roof Application For Rainwater Harvesting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Muhammad Nasrul Asraf (2019) An Investigation On Construction Sequence Of An Arch-Shaped Tensegrity Structure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rosli, Nur Athirah (2019) Activated Carbon-Limestone-Alginate (Ala) Beads For The Removal Of Colour And Turbidity From Kerian River Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozali, Nor Shawani Mohamad (2022) Sediment Transport Analysis Of Teluk Kepayang Using Hec-Ras. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozi, Norainna Che (2017) Trihalomethanes Formation Potential In Groundwater And Surface Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rusli, Muhammad Ikmal Ahmad (2022) Removal Of Fats, Oils, And Grease From Food And Beverages Wastewater By Using Sono-Electrocoagulation Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saddum, Muhammad Nizar (2006) Kajian Keberkesanan Sistem Bas Kampus Induk USM. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salang, Mariati (2005) Saliran Bandar Dan Amalan Pengurusan Terbaik Bagi Taman Damai I & II, Parit Buntar Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saleh, Afza (2021) Public Opinion Toward Green Infrastructure On Buildings For Sustainable In Parit Buntar And Sungai Jawi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Saleh, Nursyahirah Mohd (2022) Rock Mass Characterisation Of Tunnel Face Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nadia Syahiera (2022) Evaluation Of The Masonry Concrete Arch Structural Response And Prediction Of Crack Using Non-Contact And Contact Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nur Aisyah Farhanah (2017) Removal Of Iron And Manganese Using Ejectors And Roughing Filter Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nurhafizah Abdul (2022) Water Pipeline Network Analysis Of Usm Engineering Campus Using Watergems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sansuddin, Nurulliyana (2005) A Study On Pm10 On Health Impact Of Air Polution In Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sayuti, Muhammad Mursyidi Ahmad (2022) Investigation Of Wind Load Effect On Butterfly Roof Of Low Rise Building Using Computer Fluid Dynamic (Cfd) Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sazali, Mohd Asnizam (2017) Aquifer Characterization And Groundwater Potential Evaluation In The Sedimentary Rock Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sekhar, Thanesh Naidu (2022) Heavy Metals Distribution In Water At Perai River. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shafei, Siti Nurbaini Mohd (2022) Effectiveness Of Bamboo Panel In Reducing Sound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shahifulnaas, Muhammad Aiman (2017) Characterization, Delignification And Hydrolysis Of Malaysian Elephant Grass For The Recovery Of Sugar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Shahrom, Mohamad Shamsul Nizam (2005) Development Of Gis Based Mapping System For Future Main Campus Infrastructure Managing Spatial Information. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sham, Muhammad Harisfarhan Mohd (2022) Experimental Study On Mechanical Strength And Performance Of Gigantochloa Ligulata Bamboo (Buluh Mata Rusa) Joints. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shamsudin, Nur Dhaniah Athirah (2022) Effect Of Floating Plant Growth Rate On Water Quality Performance Of Wetland In Treating Domestic Sewage. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shamsul, Aida Syafiqah (2022) A Systematic Literature Review Bolted Connection Failure In Cold-Formed Steel Beam-To-Column Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shari, Noraini (2022) Effectiveness Of Allium Tuberosum And Allium Fistulotum As Cover In Improving Green Roof Water Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sharil, Abdul Rasyid (2005) Hubungan Sifat Keliangan Dengan Kekuatan Mampatan Untuk Bata Tanah Liat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shawal, Luqman Hakim (2019) Assessment Of Raw And Coagulated Latex Wastewater Of Enhance Aeration Stabilization Basin (Asb) A Batch Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shubandrio, Farid Aizuddin (2018) Effects Of Partial Replacement Of Natural Aggregate By Recycled Aggregate From Asphalt Pavement On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Si, Kian Shen (2022) Influence Of Admixtures On The Properties Of Extrudable Concrete For 3d Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sin, Jing Yao (2017) Characterization And Behaviour Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Wastewater With The Presence Of Ferrous Sulphate And Polyaluminium Chloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Singh, Amarpreet Kaur Mahinder (2019) Critical Success Factors For Malaysian Contractors In International Construction Projects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sinniah, Loges (2005) Biotechcnological Method To Prevent Erosion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Srigaran, Prabagaran (2019) Analysis On The Effects Of Gradation Of Sand On Shear Strength Characteristics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Suhailmi, Mardhiah Muhammad (2022) Analysis Of Wind Pressure Effect On Gambrel Roof Of A Low-Rise Building Using Computational Fluid Dynamic (Cfd). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Suhaimi, Izatil Fadhilah (2006) Mengkaji Ciri-Ciri Jalan Dua Lorong Dua Hala Untuk Keadaan Lalu Lintas Di Malaysia (Skop Kawasan Nibong Tebal). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Suhaimi, Nik Siti Ayeesha Nik (2022) Feasibility Study Estimation Of Water Usage In USM Engineering Campus Hostels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Susanna Liow, Soo Yee (2018) Flexural Behaviour Of Rubberized Concrete Compared To Normal Reinforced Concrete Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Syed Ahmad, Syed Mohd Syawal (2005) Analisis Dan Rekabentuk Dewan Serbaguna Mahkamah Kuala Terengganu Berasaskan Binaan Struktur Kerangka Portal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tahar, Noor Emylia Abdul (2022) Leachate Treatment Removal Of Organic Matter Using Ultrasonic-Assisted Electrocoagulation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tai, Joon Hong (2017) Assessment Of The Performance Loss And Repairabiity Of Earthquake Damaged Reinforced Concrete Buildings Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tajudin, Mifzal Thaqif Md (2022) Characterization Of Oil Palm Frond And Bamboo As Adsorbent For Methylene Blue Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Chin Guan (2018) Seismic Response Analysis Of Buildings In Malaysia Subjected To Near-Field And Far-Field Ground Motions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Choon Hoe (2005) Menentukan Aras Perkhidmatan Jalan Arteri Menggunakan Kaedah Highway Capacity Manual (HCM) Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Hong Yang (2022) Cost Evaluation On The Effect Of Adopting Different Shear Wall Arrangements For Rectangular Office Building Under Seismic Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jeff Fei (2022) Evaluation Of Fiber Reinforced Asphalt Mixtures And Sensitivity Analysis For Airport Pavement Maintenance And Rehabilitation Practices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jin Sheng (2017) The Behaviour Of LNAPL In Sand Due To Fluctuating Groundwater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Ling Chi (2022) Synthesis Of Titanium DioxideZeolite Catalyst And Treatment Of Sulfamethoxazole. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Poh Soon (2004) Penggunaan Ujian Tanpa Musnah Ke Atas Struktur Kayu. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Qing Long (2022) Recovery Of Titanium Dioxide (Tio2) From The Photocatalysis Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Shin Ru (2018) Evaluation Of The Combined Effects Of Long Term Aging And Moisture Damage On Asphalt Mixture Incorporating Cubical Aggregates And Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Yih Ken (2018) Twin Tunnel Interaction Mechanism In Kenny Hill Formation Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Zi Guan (2018) The Effectiveness Of On-Site Detention For Water Quantity Control In Taman Ilmu Using Stormwater Management Model (SWMM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tarmizi, Nur Farah Izzati Mohd (2022) A Systematic Review Compression Failure In Cold-Formed Steel (Cfs) Column Sections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tarmizi, Siti Suhaila Mohd (2021) Integrated Electrocoagulation-Ultrasonic Method For Organic Matter Removal From Landfill Leachate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Taufik, Ruzainah Ahmad (2017) Spatial Analysis On Strong Winds Occurrence In The Northern Regionmalaysia Based On Interpolated Wind Speed And Wind Direction Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tee, Xin Lei (2018) Pedestrian Route Choice Of Vertical Facilities At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tengku Shariff, Tengku Saiful (2005) Peak Flow Attenuation Using Dry Pond. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teo, Chia Chia (2019) Cost Analysis Of Low Rise Buildings Subjected To Seismic And Non Seismic Action. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teruna, Izzul Akmal (2017) Performance Of Composite Adsorbent In River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tg Razman, Tg Mohamad Shahril (2005) Slope Stability Studies For Development Of Hillsite Area In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tg. Azhar, Tengku Noor Arbaee (2006) Development Of Building And Road Spatial Database For Parit Buntar New Township. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Thai, Kim Sing (2017) Effect Of High Strength Concrete On Capacity Of Prestressed Beam For Bridge Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Theenathayalan, Durgeshwar (2022) Analyzing The Risks P-Hailers Face On The Road. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Thong, Wei Yung (2005) Kajian Tren Pemilikan Kereta Di Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiew, Ming Jie (2022) Cost Analysis For Earthquake Resistance Design Of Reinforced Concrete High Rise Office Building In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiffany, Ting Feng Nee (2017) Rural Area Development By Understanding Basic Infrastructure Needs Through Local Survey In Sibu, Sarawak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Toh, Bin Tee (2006) Penilaian Keberkesanan Malaysian Highway Capacity Manual Dalam Rekabentuk Persimpangan Berlampu Isyarat Di Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tung, Wen Yan (2018) Rock Slope Stability Assessment Using Photogrammetric Mapping And Limit Equilibrium Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Vivian Lim, Wei Wen (2018) Study On The Behavior Of Right-Turning Vehicles At Different Types Of Unsignalised Intersections In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Voon, Sze Nee (2017) Flexible Scheduling For Construction Project Using Fuzzy Logic Method And Critical Path Method (CPM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wahab, Muhammad Fikri Abd (2017) Removal Of Solids, Total Coliform, E.Coli, Uv254, Colour And Turbidity Using Zeolite Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wan Mohd Ali, Wan Norfazlinda (2018) Investigation Of Microbiological Concentration In Indoor Air At School Classrooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wong, Kok Foo (2005) Use Of GPS And GIS For Preparation Of Input Maps For AGNPS Model Based On Elevation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wong, Qi Min (2021) Vulnerability Assessment Of Telecommunication Steel Tower Subjected To Seismic Excitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yacob, Najihah Mohamed (2022) Willingness To Pay Extra Charge For Increasing Safety While Using Public Transport Post Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yahya, Siti Aishah (2019) Assessment On Heavy Goods Vehicle Conspicuity Based On The Road Transport Act 1987. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yap, Han Yin (2017) Optimization Of Project Duration And Constraint Resource Using Monte Carlo Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yap, Wei Keat (2019) Ammoniacal Nitrogen Removal From Landfill Leachate By Heat Activated Zeolite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yasser, Karam Shamdeen (2022) Development Of Cost-Efeffective Demonstration Hydraulic Physical Model Of Debris Flow. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yazid, Muhammad Amar Firdauz (2018) Effect Of Ground Motion On Seismic Design Of Low To Medium Rise Infilled Moment Resisting Concrete Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yazid, Nurulfatin Aqilah Mohd (2019) Effect Of Coated Expanded Polystyrene (Ceps) Beads Aggregates On The Properties Of Hollow Concrete Block. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yeo, Li Qun (2022) Migration Behavior Of Light Non Aqueous Phase Liquid (Lnapl) At Unsaturated Zone Due To Precipitation And Fluctuating Groundwater Table. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yeoh, Chun Xian (2022) Numerical Simulation Of Mudflow Interaction With Sabo-Dam By Using Two Dimensional Depth-Averaged Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yern, Chi Kian (2018) Assessment Of Structure-Specific Seismic Fragility Curves Of Buildings Using Spo2frag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yunus, Nurul Yasarah Mohd (2017) A Study On The Extent Of Pond Accumulation Influence On Roadss Hydroplaning Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusof, Darol Shafek (2005) Kajian Kesan Adid Terhadap Bahan Logam-Kes Plat Aluminium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusof, Mohd Anuar Mohd (2017) Effect Of Plastering And Carbon Fibre Reinforced Polymer (CFRP) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Mohd Kalmizan (2005) Kehubungan Dan Perbezaan Di Antara Kebolehtelapan Dan Penyusupan Bagi Tanah Di Kawasan Butterworth. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Muhammad Firdaus (2017) Awareness Study On The Quality Assessment System In Construction (Qlassic) For Construction Works In Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Muhammad Umar Mohd (2022) Seismic Vulnerability Assessment Of An Rc-Frame Building Exposed To Different Direction Components Of Ground Motions Using Nonlinear Dynamic Analysis And Fragility Function. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yuzaile, Yushafika Roshaini (2021) Gis-Based Soil Erosion And Sediment Transport Modelling Of Perak River Basin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zahir, Mohd Khairul Akmal Md (2022) Empirical Shear Force Capacity And Stiffness Model Of The Cross-Formation Screw Connections In Timber– Concrete Composite Structures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zailan, Masezatti (2018) Prediction Of PM10 Concentration Using Multiple Linear Regression And Support Vector Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zainal Anuar, Suzita (2005) Ujian Model Gegaran Penusukan Kesan Parameter : Saiz Cerucuk. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zainul, Muhamad Faizal (2006) Estimating Renovation Waste And Its Management In Seberang Perai Selatan A Case Study In Nibong Tebal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zakaria, Iqmal Aiza (2022) Effectiveness Of Bod Removal From Domestic Sewage In Constructed Wetland Using Pilot Scale Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zakaria, Muhammad Norshazril Alif (2017) Thermal Comfort And Its Relation To Ventilation Approaches In Mosques. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zaki, Muhammad Hazwan (2019) A Study On The Effect Of Extreme Rainfall Intensity On Slope Stabilty Using Physical Based Modelling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zali, urul Hidayah Mat Assessing The Effects Of Polyolefin Fiber On The Properties Of Modified Asphalt Binder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zamzuri, Muhammad Amir Hakimi Mohd (2022) Evaluation Of Safety Awareness And Perception Of Wayfinding Tools Among Students And Staff In Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zan, Sazrul Ariff Mat (2022) Evaluating The Potential Benefits Of Permeable Paving Surfaces To Improve Stormwater Runoff Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zauki, Wan Nadhira Shaqina Wan (2017) Analysis Of Walking Accessibility To Rapid Penang Bus Services (Route 303) In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zaulkifli, Norsyafina Anita (2022) Sediment Transport Study At Pendiat, Sungai Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulharis, Muhammad Haris (2019) Study Of Hospital Noise At Parit Buntar Hospital, Parit Buntar, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulkifly, Natasha Amiera Mohd (2017) Landfill Leachate Treatment Using Nano Composite Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulmahdi, Zuraini (2022) Mechanism Of Pore Water Pressure And Groundwater Fluctuation In Slope Stability Under Heavy Rainfall Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zuraidi, Wan Muhammad Adib Wan (2017) Performance Of Actual And Laboratory Horizontal Roughing Filter For Turbidity And E.COLI Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Conference or Workshop Item

Haji Mohamed, Ahmad Fariz and Abdul Razalim, Faizal Azrin and Md Saad, Mohd Hanif and Surip, Miswan Sistem Pakar Berkonsepkan GIS untuk Penentuan Perletakan Industri. In: 2001 Annual Seminar On Geoinformation Engeneering, Penang Malaysia.

Husin, Abdullah and Wan Hussin, Wan Muhd Aminuddin and S Ahmad, Mohd Sanusi (2001) Konsep Pengekstrakan Ketinggian Struktur Bangunan Seca Otomatik Dari Model Permukaan Berdigit (DSM) Dan Moel Ketinggian Berdigit (DEM) dengan Kaedah Penolakan (DSM-DEM). In: Annual Seminar On Geoinformation Engineering, Penang.

W.Hussin, Assoc.Prof.Dr.W.Muhd Aminuddin (1998) Tunggukan Ukur Kadastra Negara - Kajian Statistik Dan Cabaran Juruukur Tanah. In: SEMINAR PERKEMBANGAN GEOGRAPHICAL INFORMATION SYSTEM(GIS) DALAM BIDANG UKUR TANAH., 25 APRIL 1998, POLIYEKNIK UNGKU OMAR,IPOH PERAK.

W.Hussin, Assoc.Prof.Dr.W.Muhd Aminuddin (1996) Ukur Kadastra - Pengendalian Sistem Dan Penyelesaian Masalah. In: KURSUS ASAS UKUR TANAH PERINGKAT KEBANGSAAN, 4-7 JUN 1996, LUMUT PERAK.

Wan Hussin, Prof.Madya Dr Wan Muhd Aminuddin (1996) Pelaksanaan Sistem Ujian Berkomputer(Bahagian 1)(SLUB) Di JabatanPengangkutan Jalan Malaysia Dan Hubungannya Dengan Sistem Latihan Ujian Berkomputer. In: Jabatan Pengangkutan Jalan, 15 November 1996, Melaka.

Thesis

Elmagid Elnaggar, Ahmed Mohamed Abo (2006) Volume Estimation Of Curved Surfaces Using Structured Lighting And Their Similarity Measure. Masters thesis, Universiti Sains Malaysia.

Abdullah, Rohaya (2020) Evaluation Of Traffic Weaving Behavior And Performance At Malaysian Urban Highway Weaving Segments. PhD thesis, Universiti Sains Malaysia.

Abiodun, Salami Babatunde (2018) Mechanical Properties And Durability Performance Of POFA-Based Engineered Alkali-Activated Cementitious Composites. PhD thesis, Universiti Sains Malaysia.

Abu Seman @ Hj Ahmad, Nor Amirah (2019) Flow Pattern And Hydraulic Characteristics A Of Hexagonal Modular As Channel Bed. PhD thesis, Universiti Sains Malaysia.

Abujayyab, Sohaib K. M. (2017) Spatial Data Mining Model For Landfill Sites Suitability Mapping Based On Neural Networks And Multivariate Analysis. Masters thesis, Universiti Sains Malaysia.

Akbar, Nor Azliza (2019) Potential Use Of Ozonation With Limestone Adsorption Process In Groundwater Treatment. PhD thesis, Universiti Sains Malaysia.

Alawneh, Rami Mohammad Deeb (2019) Developing Framework For A Conceptual Model Towards Assessing The Environmental Compliance Of Non-Residential Building In Jordan. PhD thesis, Universiti Sains Malaysia.

Ali, Yousefi (2019) Effect Of Multi-Walled Carbon Nanotubes And Surfactants Towards Micro-Crack Using Acoustic Emission Technique. PhD thesis, Universiti Sains Malaysia.

Bee, Soo Ling (2019) Preparation and characterization of asymmetric chitosanbiogenic hydroxyapatite composite membrane for guided bone regeneration. Masters thesis, Universiti Sains Malaysia.

Chai, Chen Chu (2018) Foldable Structures Adapted From Tessellation Origami With High Degree Of Freedom. PhD thesis, Universiti Sains Malaysia.

Dashti, Arezoo Fereidonian (2017) Treatment Of Palm Oil Mill Effluent From Polishing Pond Using Calcinated Limestone Roughing Filter. PhD thesis, Universiti Sains Malaysia.

El Abidi, Khaled M Amtered (2018) Development Of Prefabricated Building Implementation Frame Work For Addressing Housing Needs In Libya. PhD thesis, Universiti Sains Malaysia.

Ghani, Zaidi Ab (2019) Based Activated Carbon Incorporated With Iron Oxide Nanoparticles As Adsorbents In Landfill Leachate Treatment. PhD thesis, Universiti Sains Malaysia.

Goh, Chin Ong (2019) Evaluation On The Effects Of Nodrainageboundary Condition To The Groundwater Pressure Surrounding The Natm Permanent Cast In-Situ Tunnel Lining. Masters thesis, Universiti Sains Malaysia.

Hamad, Rami J. A. (2017) Efficiency Of Using Steel End Caps In Improving The Post-Fire Flexural Behavior Of Frp Reinforced Concrete Beams. PhD thesis, Universiti Sains Malaysia.

Hasan, Hazwani (2017) The Efficiency Of I-Beam Steel Section With Perforated-Corrugated Web Profile. Masters thesis, Universiti Sains Malaysia.

Hassan, Marwan Adil (2019) Evaluation Of Hydraulic Parameters Effects On The Stability Of Dike Embankment During Spatial Overtopping Tests. PhD thesis, Universiti Sains Malaysia.

Ismail, Dzulkarnaen (2016) Project Management Success For Post-Disaster Reconstruction Projects From The International Non-Governmental Organisations’ Perspectives. PhD thesis, Universiti Sains Malaysia.

Ismail, Sheikh Ahmad Faiz (2019) A Preliminary Study To Determine The Essential Facilities Required For Tourists In Langkawi. Masters thesis, Universiti Sains Malaysia.

Jamil, Rhahimi (2019) Numerical Simulation Of The Cascade Aerator System For The Removal Of Iron And Manganese. PhD thesis, Universiti Sains Malaysia.

Kakar, Muhammad Rafiq Khan (2015) Effects of adhesion failure on moisture damage of warm mix asphalt containing cecabase additive. PhD thesis, Universiti Sains Malaysia.

Kasehyani, Nur Hanis (2019) Analysis Of Pedestrian Behaviour Attributes In Rail Transit Terminal Based On Pedestrian Spatial Interaction. Masters thesis, Universiti Sains Malaysia.

Khan Kakar, Muhammad Rafiq (2015) Effects of adhesion failure on moisture damage of warm mix asphalt containing cecabase additive. PhD thesis, Universiti Sains Malaysia.

Mohajeri, Leila (2010) Process Parameters Optimization For Bioremediation Of Crude Oil In Contaminated Coastal Sediments. Engineering Doctorate thesis, Universiti Sains Malaysia.

Mohamad, Nabilah (2019) Enhancement Of Landfill Daily Cover In Minimizing The Migration Of Heavy Metals Using Mixture Of Laterite, Peat Soils And Rice Husk. Masters thesis, Universiti Sains Malaysia.

Mohamad Faudzi, Siti Multazimah (2019) Two-Dimensional Simulation Of Upper Sungai Langat Using HEC-HMS, HEC-RAS And RRI Model. Masters thesis, Universiti Sains Malaysia.

Mohamad Nazir, Amni Umirah (2018) The Assessment Of Current 'As Built' Condition And Improvement Of Future Design Of Mosque's Water Closet. Masters thesis, Universiti Sains Malaysia.

Mohamad Zaidi, Mohamad Irfan (2019) Evaluating The Adoption The Use Of Green Technology And Sustainability Design For Buildings In Penang. Masters thesis, Universiti Sains Malaysia.

Mohammed, Ahmed Saud (2018) Evaporation Water Balance In Arid Area Anbar Governorate – Iraq. PhD thesis, Universiti Sains Malaysia.

Mohd Sabri, Nurul Shafyra (2013) Design of Experiment (Doe) Study Of Hydroxyapatite (Ha) For Load Bearing Application Via 2k Factorial Design. Masters thesis, Universiti Sains Malaysia.

Moksin, Nordalila (2019) Development Of Magnetorheological Elastomers Based On Natural Rubber And Industrial Waste Nickel Zinc Ferrite. Masters thesis, Universiti Sains Malaysia.

Moon, Wei Chek (2019) Tsunami Flow Characteristics And Design Load Equations For Residential Buildings Located At Malaysian Coastline. PhD thesis, Universiti Sains Malaysia.

Ng, Wai Keun (2018) Foldable Structure Based On Origami With Curved Fold Lines Concept. PhD thesis, Universiti Sains Malaysia.

OTHMAN, EZLINA (2009) The Performance Of Silica Sand For Leachate Treatment. Masters thesis, Universiti Sains Malaysia.

Rashid, Nur Aziemah Abd (2019) Artificial Barrier As To Enhance Removal Of E.Coli In Riverbank Filtration. PhD thesis, Universiti Sains Malaysia.

Rasli, Nur Baitul Izati (2019) Investigation Of Indoor Air Quality And Thermal Comfort In Mosque Buildings. PhD thesis, Universiti Sains Malaysia.

Sapingi, Mohd Sharizal Mohd (2019) Adsorption Study Of Heavy Metals And Natural Organic Matters (Nom) In Groundwater Using Metakaolin. Masters thesis, Universiti Sains Malaysia.

Surbakti, Medis Sejahtera (2017) Application Of Random Regret Minimization Model With Convexity-Concavity Parameter For Binomial Mode Choice Analysis. PhD thesis, Universiti Sains Malaysia.

Suri, Syaran (2016) Variability Effects Of Rainfall Events On Soil Erosion In Northernregion Of Peninsular Malaysia. Masters thesis, Universiti Sains Malaysia.

Tayeh, Somia M. O. (2012) Color Removal from Synthetic Dye And Textile Wastewaters Using Adsorbent Prepared From Psyllium Husk. Masters thesis, Universiti Sains Malaysia.

U Han , Thein Maung (2006) A Study On The Performance Of Limestone Roughing Filter For The Removal Of Turbidity, Suspended Solids, Biochemical Oxygen Demand And Coliform Organisms Using Wastewater From The Inlet Of Domestic Wastewater Oxidation Pond. Masters thesis, Universiti Sains Malaysia.

Von, Woei Chew (2019) Geological Evaluation Ahead Of Tunnel Face Using Tunnel Seismic Prediction Method And Japanese Highway Rock Mass Classification System. Masters thesis, Universiti Sains Malaysia.

Yaacof, Nurashikin (2017) The Establishment Of Setback Distance For Malodour Mitigation From Palm Oil Mill. PhD thesis, Universiti Sains Malaysia.

Zahed, Mohammad Ali (2010) Enhanced Biodegradation Of Dispersed Crude Oil Using Marine Microorganisms. PhD thesis, Universiti Sains Malaysia.

Zainordin, Nazatul Syadia (2017) Association Between Walkability Index And Pedestrians’ Perspective In Reducing Exposure Of Schoolchildren To Ground Level Ozone. PhD thesis, Universiti Sains Malaysia.

Image

PPKAW, Pusat Pengajian Kejuruteraan Awam and PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik and PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral and PPKM, Pusat Pengajian Kejuruteraan Mekanikal and PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa and PPKK, Pusat Pengajian Kejuruteraan Kimia (2017) Web banner of International Conference of Global Network for Innovative Technology (IGNITE) and AWAM International Conference in Civil Engineering 2017. [Image]

Teaching Resource

Awam, Pusat Pengajian Kejuruteraan (2021) EAA211 – Engineering Mathematics for Civil Engineers Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAA483 – Construction Management Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan EAA483 – Construction Management Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAA484 – Building Construction and Technology Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAA486 – Project Management Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAF523 – Fire Protection Technology Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAF525 – Structural Design for Fire Safety Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAF526 – Fire Behaviour Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAG141 – Geology for Civil Engineers Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG141 – Geology for Civil Engineers Duration: 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAG245 – Soil Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG245 – Soil Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAG245 – Soil Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAG345 – Geotechnical Analysis Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG345 – Geotechnical Analysis Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAG444 – Soil Stabilisation and Ground Improvement Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAG444 – Soil Stabilisation and Ground Improvement Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAH221 – Fluid Mechanics for Civil Engineers Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAH221 – Fluid Mechanics for Civil Engineers Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAH221 – Fluids Mechanics for Civil Engineers Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAH225 – Hydraulics Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAH316 – Hydraulic Structure Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAK163 – Geomatic Engineering Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAK382 – Geographic Information Systems Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAL337 – Pavement Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAL338 – Transportation and Road Safety Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAL339 – Sustainable Transport Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAL431 – Highway Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAL431 – Highway Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAP215 – Water Supply and Treatment Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP315 – Wastewater Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAP414 – Industrial Waste Management Duration: 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP415 – Solid Waste Management Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAP581 – Water Supply Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP581 – Water Supply Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP582 – Wastewater Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP583 – Air and Noise Pollution Control Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP584 – Environmental Impact Assessment Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAP585 – Solid and Hazardous Waste Management Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS151 – Statics and Dynamics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS151 – Statics and Dynamics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS151 – Statics and Dynamics Duration: 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS152 – Strength of Materials Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS153 – Civil Engineering Materials Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS153 – Civil Engineering Materials Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS253 – Theory of Structures Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS253 – Theory of Structures Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS254 – Structural Analysis Duration : 3 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS353 – Reinforced Concrete Structural Design I Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS353 – Reinforced Concrete Structural Design I Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS357 – Sustainable Concrete Materials and Practices Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS451 – Timber and Masonry Engineering Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS451 – Timber and Masonry Engineering Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS451 – Timber and Masonry Engineering Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS456 – Advanced Structural Analysis Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS457 – Structural Steel Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS457 – Structural Steel Design Duration : 1 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS458 – Pre-Stressed Concrete Design Duration : 1 hour. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS661 – Advanced Structural Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS661 – Advanced Structural Mechanics Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS662 – Structural Retrofitting Technology Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS662 – Structural Retrofitting Technology Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS663 – Dynamics and Stability of Structures Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EAS663 – Dynamics and Stability of Structures Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EAS665 – Bridge Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EUP222 – Engineers in Society Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2021) EUP501 – Engineering Management Duration : 2 hours. [Teaching Resource] (Submitted)

Awam, Pusat Pengajian Kejuruteraan (2022) EUP501 – Engineering Management Duration : 2 hours. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018/January 2019 EMM 331 – Solid Mechanics [Mekanik Pepejal] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2003) ESA 201(3) - PROSES RAWAK KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 201(3) - PROSES RAWAK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2003) ESA 202(3) - SIMULASI DAN PEMODELAN SISTEM DINAMIK APRIL 03. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 202(3) - SIMULASI DAN PEMODELAN SISTEM DINAMIK MAC 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 221E(3) - MECHANAICS OF SOLIDS NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 243(3) - AERODINAMIK NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 251(3) - TEORI SISTEM KAWALAN NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 322(3) - DINAMIK STRUKTUR MAC 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa ESA 322/3 STRUCTURAL DYNAMICS (JUNE 2015). [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 341(3) - GASDINAMIK NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAA 384-2 - TEKNOLOGI PEMBINAAN OKTOBER 04. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAA 501(4) - OPERATIONAL METHODS & ENGINEERING MANAGEMENT APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAA211 - ENGINEERING MATHEMATICS FOR CIVIL ENGINEERS [MATEMATIK KEJURUTERAAN UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAA211 – ENGINEERING MATHEMATICS FOR CIVIL ENGINEERS [MATEMATIK KEJURUTERAAN UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (1993) EAA451-3 - TEORI STRUKTUR III - OKT-NOV 1993.pdf. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAA484 – Building Construction and Technology Duration : 1 hour. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAG 245(3) - SOIL MECHANIC (MEKANIK TANAH) APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAG 245E(3) - SOIL MECHANICS EAG 245E(3) - MEKANIK TANAH MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAG 345(3) - ANALISIS GEOTEKNIK APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAG 442(4) - KEJURUTERAAN GEOTEKNIK LANJUTAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG141 GEOLOGY FOR CIVIL ENGINEER [GEOLOGI UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG141 – GEOLOGY FOR CIVIL ENGINEER [GEOLOGI UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG245 – SOIL MECHANICS [MEKANIK TANAH] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAH 225(3) - HIDRAULIK MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAH 422(4) - KEJURUTERAAN SUMBER AIR LANJUTAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAK382 – Geographic Information Systems Duration : 1 hour. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAL235 – HIGHWAY AND TRAFFIC ENGINEERING [KEJURUTERAAN LEBUH RAYA DAN LALU LINTAS] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAL335 – TRAFFIC AND TRANSPORTATION ENGINEERING [KEJURUTERAAN PENGANGKUTAN DAN LALULINTAS] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAL338 – Transportation and Road Safety Duration : 2 hours. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAP215 – Water Supply and Treatment Engineering Duration : 2 hours. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAP216 – Introduction to Environmental Engineering Duration : 3 hours. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAP414 – Industrial Waste Management Duration : 1 hour. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS151 – STATICS AND DYNAMICS [STATIK DAN DINAMIK] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS152 – STRENGTH OF MATERIALS [KEKUATAN BAHAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS253 – THEORY OF STRUCTURES [TEORI STRUKTUR] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS254 – STRUCTURAL ANALYSIS [ANALISIS STRUKTUR] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2016) EAS354 STEEL AND TIMBER STRUCTURAL DESIGN (JUN 2016). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2022) EAS456 – Advanced Structural Analysis. [Teaching Resource] (Submitted)

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS664 – PRINCIPLE OF STRUCTURAL DESIGN (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS665 – BRIDGE ENGINEERING (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB 220/3 ENGINEERING POLYMERS [POLIMER KEJURUTERAAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB201/3 – ENGINEERING ECONOMY AND MANAGEMENT [ EKONOMI DAN PENGURUSAN KEJURUTERAAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB202/3 – CRYTALLOGRAPHY AND BONDING IN SOLIDS [KRISTALOGRAFI DAN IKATAN DALAM PEPEJAL] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EUM 102(4) - MATEMATIK KEJURUTERAAN II EUM 112(4) - KAEDAH BERANGKA & STATISTIK KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 111 - MATEMATIK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 213(3) - PENYELIDIKAN OPERASI MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 222 - KEBANGKALIAN DAN STATISTIK GUNAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 213(2) - PERAKAUNAN PENGURUSAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 222(3) - JURUTERA DALAM MASYARAKAT MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 222(3) - JURUTERA DALAM MASYARAKAT NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 301(3) - PENGURUSAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUT 201(2) - TEKNIK BERFIKIR NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 113-3 - BAHAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 113-3 BAHAN KEJURUTERAAN OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 113-3 ENGINEERING MATERIALS IKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 113-3 ENGINEERING MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 160(3) - KIMIA FIZIKAL BAHAN KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 160(3) - KIMIA FIZIKAL BAHAN KEJURUTERAAN MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 160-3 ENGINEERING PHYSICAL CHEMISTRY OF MATERIALS APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 160-3 KIMIA FIZIKAL BAHAN KEJURUTERAAN APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 202(3) - KRISTALOGRAFI & IKATAN DALAM PEPEJAL MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 210E(2) - PROCESS CONTROL MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 222-3 - REKABENTUK BAHAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 405E-3 - NON DESTRUCTIVE TESTING & FAILURE ANALYSIS NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 511 - TEKNIK PENCIRIAN BAHAN APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 522 CORROSIONS AND PROTECTION OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 522 CORROSIONS AND PROTECTION OCT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 524 - BAHAN KOMPOSIT APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 524-3 COMPOSITE MATERIALS OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 204(3) - BAHAN ELASTOMER MAC 2005. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 212(3) - PEMPROSESAN LATEKS MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBP 415/3 FIBRE PROCESSING (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 333-3 PENCIRIAN BAHAN KEJURUTERAAN OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 417E GEOMECHANICS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 417E-3 GEOMECHANICS OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 417E-3 GEOMECHANICS OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 419E-2 BLASTING TECHNOLOGY APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 419E-2 BLASTING TECHNOLOGY APRIL-MAY 06. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 320 - MIKROPEMPROSES II NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2003) EEE 332 - PERHUBUNGAN APRIL 03. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 332 - PERHUBUNGAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 350 - SISTEM KAWALAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 432 - ANTENA DAN PERAMBATAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 223 - TERMOBENDALIR NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 423 - KEJURUTERAAN KEBOLEHPERCAYAAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2003) EMH 211(3) - TERMODINAMIK APRIL 03. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 331E(3) - KAEDAH UNSUR TERHINGGA DALAM KEJURUTERAAN MEKANIK MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 372E(3) - PENYEJUKAN & PENYAMANAN UDARA MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 430 - KEJURUTERAAN PERISIAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMH 462E(3) - SISTEM PENUKARAN TENAGA MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 101(3) - MEKANIK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 111(3) - STATIK NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 221(3) - KEKUATAN BAHAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 322E(3) - HINGAR DAN GETARAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 331(3) - MEKANIK PEPEJAL NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 202(3) - SISTEM PEMBUATAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 212(4) - TEKNOLOGI PEMBUATAN II MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 322E(3) - KEJURUTERAAN INDUSTRI MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 332(3) - KUALITI & KEBOLEHPERCAYAAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 441E(4) - PENGURUSAN PENGELUARAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 481E(3) -ERGONOMIK & KESELAMATAN INDUSTRI NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 201(3) -TEKNOLOGI PEMBUATAN I NOV 05. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RAG 121 - SAINS PERSEKITARAN 1 SEP 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 104 - MEKANIK KEJURUTERAAN APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 104 - MEKANIK KEJURUTERAAN FEB 04. [Teaching Resource]

Pusat Pengajian Kejuruteraan Awam, PPKAW (2016) EAG345 GEOTECHNICAL ANALYSIS (JAN 2016). [Teaching Resource]

Pusat Pengajian Kejuruteraan Awam, PPKAW (2016) EAH221 FLUID MECHANICS FOR CIVIL ENGINEERS (JAN 2016). [Teaching Resource]

Other

Tommy, Huang Lick Wei (2019) Iron And Manganese Removal From Groundwater By Using Limestone Filter With Iron-Oxidizing Bacteria. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

This list was generated on Thu Dec 26 19:17:47 2024 +08.