Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 286.

A.Majid, Taksiah and Choong , Kok Keong and Lau , Tze Liang and Zaini, Shaharudin Shah (2014) Ductility Demands Of Inelastic Structures Affected By Repeated Earthquakes. Project Report. Universiti Sains Malaysia. (Submitted)

Elmagid Elnaggar, Ahmed Mohamed Abo (2006) Volume Estimation Of Curved Surfaces Using Structured Lighting And Their Similarity Measure. Masters thesis, Universiti Sains Malaysia.

A

Abd Rahim, Siti Aini Nabilah (2018) The Effectiveness Of Deoderatex Membrane Treatment Of Odour At Toilet In Vertical Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abd Razak, Dzulkifli (2008) The next greatest engineering challenge. New Sunday Times.

Abdul Hamid, Nur Fatin Najiyah (2018) Assessment Of Road Traffic Noise At Residential Area In Nibong Tebal, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abdullah, Siti Najwa Contingency Plan For Managing Slope-Related Risks A Case Study For Menora Tunnel In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abu Bakar, Siti Nurwajihah (2018) Treatment Of Landfill Leachate By Palm Oil Waste Carbon Copper-Oxide Nano Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Abujayyab, Sohaib K. M. (2017) Spatial Data Mining Model For Landfill Sites Suitability Mapping Based On Neural Networks And Multivariate Analysis. Masters thesis, Universiti Sains Malaysia.

Adenan, SSaidatul Husna Mohamed (2017) Experimental Investigation Of Pedestrian Flow Through A Corridor With Corner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adha, Nor Amelia (2017) Cost Comparison Of Seismic Design For Reinforced Concrete Building Under Ranau Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ahamad Lazin, Nur Fajrina (2018) Manganese Removal From Synthetic Wastewater Using Pyrolyzed Chicken Feather Fiber (PCFF). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aidy, Siti Hajar Noor (2017) Seismic Evaluation Of Low To Meduim Rise Of Regular Rc Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akashah, Muhammad Amirul (2017) Productivity Of Construction Projects With Industrialized Building System (IBS) Technology Adoption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alexander, Yeo Ming Ming (2017) Development Of A Numerical Model For The Simulation Of Mudflow Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ali, Yousefi (2019) Effect Of Multi-Walled Carbon Nanotubes And Surfactants Towards Micro-Crack Using Acoustic Emission Technique. PhD thesis, Universiti Sains Malaysia.

Apilin, Nur Shuhada (2017) Effect Of Polypropylene Fiber On The Properties Of Mortar Containing Silica Fume. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azami, Nor Hafilia (2018) Rainwater Harvesting System For Surau An-Nur, Taman Pekaka, Nibong Tebal, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azhar, Muhamad Syahmi (2018) The Influence Of Damages On The Static Performance Of Single-Layer Cable Net Structure Supported Glass Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Fatin Nur Ayuni Abd (2017) Ground improvement method using rubber shredded and acrylonitrile butadiene styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Azmi, Nur Najihah The Assimilation Of Islamic Values In Driving Behaviour To Reduce Road Accidents In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

B

Bashah, Siti Fatin Qhalilah Osman (2017) Assessment Of Damage Index For Reinforced Concrete Frames Subjected To Seismic Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Basri, Siti Aisyah Ahmad Technical And Non-Technical Effect Of Disaster That Are Relevant To Disaster Risk Management Cycle (DRMC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bee, Soo Ling (2019) Preparation and characterization of asymmetric chitosanbiogenic hydroxyapatite composite membrane for guided bone regeneration. Masters thesis, Universiti Sains Malaysia.

Bukhori, Muhammad Azzim (2017) Activated Carbon, Limestone And Alginate As A Composite Adsorbent For River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

C

Chan, Wai Kit (2018) Parametric Study On The Effectiveness Of A Novel Flat Truss Shape Punching Shear Reinforcement Using Finite Element Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Che Kamahrudin, Puteri Nihal (2018) Assessment Of Seismic Scenario-Structure-Based Limit State Criteria For 23-Storey Of RC High-Rise Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Yi Ben (2018) Determination Of Ground Structure Using Microtremor Array Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Cheah, Zu Yi (2018) Flexural Capacity Of Ultra-High Performance Fibre Reinforced Concrete (Uhpfrc) Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Chong, Hong Rui (2018) Comparative Study Of Bs8110 And Eurocode 2 Standards For Design Of A Factory Reinforced Concrete Flat Slab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Choong, Kok Keoang Estimation Of Probable Earthquake Ground Motion In Peninsular Malaysia. Working Paper. Universiti Sains Malaysia, 216. (Submitted)

Chuah, Hoi Ching (2018) Comparison Between Bs 5950 And Eurocode 3 For The Design Of Pre-Engineered Steel Structure Of A Factory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

D

Damanhuri, Nur Amira Nadia (2018) Effectiveness Of Coagulationflocculation Process For The Removal Of Chemical Oxygen Demand (Cod), Color And Suspended Solid In Industrial Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dashti, Arezoo Fereidonian (2017) Treatment Of Palm Oil Mill Effluent From Polishing Pond Using Calcinated Limestone Roughing Filter. PhD thesis, Universiti Sains Malaysia.

De’nan, Fatimah and Hashim, Nor Salwani and Lim, Cheng Kuan (2020) The structural efficiency of tapered steel section with perforation under lateral torsional buckling behaviour. World Journal of Engineering, 17 (6). pp. 845-858. ISSN 1708-5284

Dinail, Nurul Juliyana (2017) Determination Of Mannings Coefficient For Modular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

E

Ehsan, Nurul Syazwani Mohamad (2017) An Experimental Study Of Natural Frequency Of Damaged Cable Net Supported Facade Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

El Abidi, Khaled M Amtered (2018) Development Of Prefabricated Building Implementation Frame Work For Addressing Housing Needs In Libya. PhD thesis, Universiti Sains Malaysia.

F

Fadzil, Nurul Farahanes Mohd Evaluation Of Tannin As Natural Coagulant For Pulp And Paper Mill Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Unpublished)

Faisal, Farhanah (2018) An Investigation On Stress Concentration Of Point-Fixed Bolted Glass System Subjected To Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Farouk, Mohamad Zulhilmi (2017) The Efficiency Of A Depressed Gully Inlet Of A Malaysian Drain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faudzi, Siti Multazimah Mohamad (2017) 2D Simulation Of Sultan Abu Bakar Dam Release Using HEC-RAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

G

Gan, Ka Jing (2018) A Study On The Effect Of Overfill Design On The Structural Behaviour Of Precast Concrete Closed Spandrel Arch Bridge. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghani, Ahmad Danial Kahfi (2018) Flood Hazard Map Of Sungai Kulim Using High Percentage Of Overlapping Images Captured By (UAV) Drone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ghani, Zaidi Ab (2019) Based Activated Carbon Incorporated With Iron Oxide Nanoparticles As Adsorbents In Landfill Leachate Treatment. PhD thesis, Universiti Sains Malaysia.

Ghozali, Noraini (2018) Experimental Investigation On Pedestrian Behaviour Walk In Inundation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Goh, Chin Ong (2019) Evaluation On The Effects Of Nodrainageboundary Condition To The Groundwater Pressure Surrounding The Natm Permanent Cast In-Situ Tunnel Lining. Masters thesis, Universiti Sains Malaysia.

Goh, Xiao Wen (2017) Effects Of Aging Condition, Preconditioned Temperature And Anti-Stripping Agent On The Adhesive And Cohesive Behaviour Of Asphalt Binder And Mastics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Govindasamy, Darvintharen (2017) A Study On The Suitable Compaction Method For Physical Slope Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gunasegar, Denesh (2017) Green Kerb – Green Technology Technique In The Development Of Alternatives Kerb Using Old Tire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

H

Haji Mohamed, Ahmad Fariz and Abdul Razalim, Faizal Azrin and Md Saad, Mohd Hanif and Surip, Miswan Sistem Pakar Berkonsepkan GIS untuk Penentuan Perletakan Industri. In: 2001 Annual Seminar On Geoinformation Engeneering, Penang Malaysia.

Halid, Nur Fatin Hanani Mohd (2017) Formation Of Trihalomethanes In Surface Water And Groundwater By Using Chlorine And Chlorine Dioxide As Disinfectant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamad, Rami J. A. (2017) Efficiency Of Using Steel End Caps In Improving The Post-Fire Flexural Behavior Of Frp Reinforced Concrete Beams. PhD thesis, Universiti Sains Malaysia.

Hamid, Nur Haziqah Mohd (2017) Prediction Of PM10 Using Multiple Linear Regression And Boosted Regression Trees. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hasan, Hazwani (2017) The Efficiency Of I-Beam Steel Section With Perforated-Corrugated Web Profile. Masters thesis, Universiti Sains Malaysia.

Hassan, Nur Munira (2017) Seismic Analysis Of Irregular Reinforced Concrete Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Humayunkabir, Sheikh Hazwan (2017) Experimental Investigation On The Load Carrying Capacity Of Modified Purlin To Rafter Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Husin, Abdullah and Wan Hussin, Wan Muhd Aminuddin and S Ahmad, Mohd Sanusi (2001) Konsep Pengekstrakan Ketinggian Struktur Bangunan Seca Otomatik Dari Model Permukaan Berdigit (DSM) Dan Moel Ketinggian Berdigit (DEM) dengan Kaedah Penolakan (DSM-DEM). In: Annual Seminar On Geoinformation Engineering, Penang.

I

Ibrahim, Nor Azlin Ali @ (2017) Verification Of CPTU Soil Types By USCS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isa, Azyrul Haffiz Mat (2017) Gated Spillway Hydraulic Modelling Of Sultan Abu Bakar (SAB) Dam And The Gated Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Dzulkarnaen (2016) Project Management Success For Post-Disaster Reconstruction Projects From The International Non-Governmental Organisations’ Perspectives. PhD thesis, Universiti Sains Malaysia.

Ismail, Hafizahizzati (2017) Prediction Of PM10 Concentration Using Multiple Linear Regression And Bayesian Model Averaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Mohammad Fikri (2017) Effects Of Plastering And Glass Fibre Reinforced Polymer (Gfrp) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Nurul Jannah (2017) Probable Maximum Precipitation Estimation Using Statistical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

J

Jamberi, Aqilah (2017) Numerical Investigation On The Strengthening Work Of Transmission Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamil, Rhahimi (2019) Numerical Simulation Of The Cascade Aerator System For The Removal Of Iron And Manganese. PhD thesis, Universiti Sains Malaysia.

Junit, Syarifah Nurhanani Syed (2017) Application Of Chitosan As A Natural Coagulant In Groundwater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

K

Kam, Pui Kuan (2017) Effects Of Anti-Stripping Additives On The Moisture Sensitivity Of Asphalt Mixtures Subjected To Several Conditioning Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruddin, Muhamad Al-Amin (2017) Indoor Outdoor Relationship Of Fine Particles (PM2.5) IN School Classroom. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarulzaman, Fasihah (2018) Development Of Sultan Abu Bakar Spillway Dam Rating Curves For Flood Mitigation Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruzaman, Nur Aini (2018) Managing Structure Related Risks For Highway Tunnelling Project In Malaysia A Contingency Plan For Menora Tunnel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamarzaman, Fatin Farhana (2018) Removal Of Ammoniacal Nitrogen And Suspended Solids In Sewage Wastewater By Using Ferrous Sulfate In Coagulation Process Via Zeta Potential And Particles Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kasehyani, Nur Hanis (2019) Analysis Of Pedestrian Behaviour Attributes In Rail Transit Terminal Based On Pedestrian Spatial Interaction. Masters thesis, Universiti Sains Malaysia.

Kasehyani, Nur Hanis (2017) Effect Of Corner On Evacuation Behaviour During Building Egress By Using Dem-Based Multi Agent Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kassim, Maimunah Abu (2017) Variability And Rainfall Against Slope Failure For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khan Kakar, Muhammad Rafiq (2015) Effects of adhesion failure on moisture damage of warm mix asphalt containing cecabase additive. PhD thesis, Universiti Sains Malaysia.

Khudria, Nur Atiqah Mohamad (2017) Degradation Of Dyes (Methylene Blue) Using Natural Rubber Incorporated With Silver Nanoparticles In Water Treatment Tank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kua, Chin Tong (2017) Determination Of Flood Load On Bridge Deck. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

L

Lani, Anuar Effendy Mat (2017) Radial Gate Hydraulic Modelling Of Sultan Abu Bakar DAM, Cameron Highland. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lau, Ji Wei (2017) Seismic Fragility Assessment Of Moment-Resisting Concrete Frame With Setback Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Chin Jie (2017) Analysis And Simulation Of Pedestrian Walking Characteristic At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Kenth Zheng (2017) Shear Behaviour Of Perforated Cold-Formed Steel Section. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Mei Ting (2017) Engineering Properties Of Warm Mix Asphalt Incorporating Fly Ash. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Sze Yee (2018) Verification And Validation Of Buildingexodus Based On The Walking Speed Of People With Disabilities (PWD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Weoi Jye (2018) Removal Of Total Coliform, E. Coli, UV254, Particles, Total Dissolved Solids (TDS), Suspended Solids (SS), And Colour Using Zeolite And Activated Carbon Mixture In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leong, Lee Vien Investigation On Volume-Delay Functions For Arterial Roads. Project Report. Universiti Sains Malaysia. (Submitted)

Leong, Weng Woh (2017) Behaviour Of Selected Criteria Air Pollutants During High Particulate Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Cheng Kuan (2018) The Structural Efficiency Of Tapered Steel Section With Perforation Under Lateral Torsional Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Wee Zheng (2018) Performance Of Rubberized Modified Asphalt Mixutres Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Yon Sheng (2017) Bending Behaviour Of Cold Formed Steel Structural Member With Perforated Section In House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lock, Pui Yee (2018) The Efficiency Of Tapered Steel Section With Perforation Under Shear Buckling Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Louis Tan, Pao Chiang (2018) Study On The Traffic Impact Of Logistic-Related Land Use. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Low, Zhao Xuan (2018) An Investigation On Construction Sequence Of Irregular Multi-Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

M

M Poovaneshvaran, Sharvin (2018) Evaluation Of Crumb Rubber And Latex Modified Asphalt Binders For Pavement Crack Sealant Purpose. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mah, Chia Ling (2017) The Behaviour Of LNAPL In Sand Due To Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Maizul, Elly Nur Myaisara (2018) Quantitative Analysis And Mapping Of Concrete Scanning Electron Microscope (SEM) Images. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Make, Chee Fong (2018) Effect Of The Vertical And Horizontal Web Reinforcement On Deep Beam With Strut-And-Tie Model With Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Noradila (2017) Study Of GAP Acceptance For Yield-Controlled Left-Turning Lane At Signalised Intersections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Razif, Muhammad Faiz Syazwan (2018) Removal Of Synthetic Methyl Orange DYE At Neutral pH BY NR-b-PVP/Ag Using Photodegradation Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md Wakif, Sarah Alia (2018) Experimental Study Of The Hydraulic Efficiency Between A Depressed And A Non-Depressed Grate In Bandar Baharu, Kedah. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Md.Nor, Nuramalina (2018) Treatment Of Toilet Odor Using Horizontally Placed Odor Removal Membrane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018/January 2019 EMM 331 – Solid Mechanics [Mekanik Pepejal] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

Merzuki, Muhammad Yusof (2017) Odour Emission From Palm Oil Mill With Different Effluent Treatment System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohajeri, Leila (2010) Process Parameters Optimization For Bioremediation Of Crude Oil In Contaminated Coastal Sediments. Engineering Doctorate thesis, Universiti Sains Malaysia.

Mohamad Nor, Nur Atiqah (2018) Comparison Of Road Traffic Noise At Residential Areas In Nibong Tebal, Penang And Klang Valley. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Nurul Atiqah (2017) Stress-Strain Response Of Full Scale Rubberized Reinforced Concrete Column Under Vertical Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed Izham, Aimi Syuhada (2018) Empirical Investigation Of Walking Speed For Bi-Directional Flow At Angled-Walkway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ali, Siti Najihah (2018) The Implementation Of Motorcycle Junction Box To Reduce Motorcycle Accident Rate In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Khairun Nizar Mohd Tajudin, Mohd Khairun Nizar Mohd (2017) Numerical Analysis Study Of Sarawak Barrage River Bed Erosion And Scouring By Using Smooth Particle Hydrodynamic (SPH). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Ruzi, Nor Aerina Aerin (2018) Effect Of Horizontal Pattern On Masonry Prism Strengthened Using Carbon Reinforced Polymer (Cfrp) And Glass Reinforced Polymer (Gfrp). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Sabri, Nurul Shafyra (2013) Design of Experiment (Doe) Study Of Hydroxyapatite (Ha) For Load Bearing Application Via 2k Factorial Design. Masters thesis, Universiti Sains Malaysia.

Mohd Yusoff, Nur Hayati (2018) Treatment Of Young Leachate Using Electrocoagulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusoff, Siti Nur Aishah (2018) Removal Of Solids, Total Coliform, E.Coli, UV254, Colour And Turbidity Using Limestone Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Yusri, Yushani Syafrina (2018) Sustainability Factors Influencing Industrialised Building System (LBS) Prospects For Post-Disaster Building Reconstruction From Productivity And Quality Aspects. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohsin, Mohammad Nazeem (2018) Effect Of Silica Fume Inclusion On Properties Of High Strength Concrete Containing High Volume Of Steel Slag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Moksin, Nordalila (2019) Development Of Magnetorheological Elastomers Based On Natural Rubber And Industrial Waste Nickel Zinc Ferrite. Masters thesis, Universiti Sains Malaysia.

Moreen, Daryl Justine (2018) Industrialised Building System (IBS) Quality Testing For Disaster Resilience From Technical And Non-Technical Perspectives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mudzrab, Fitri Mahamad (2017) A Study Of Building Automation System (Bas)- A Case Study At The School Of Civil Engineering, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Aidil Azami (2018) Study Of The Influence Of The Operational Parameters On The Removal Of Cod, Bod And Colour Of An Industrial Wastewater Treatment Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Nur Fatin (2017) Analysis On Distraction While Driving- A Case Study On Staffs And Students Of Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Zafira Nur Ezzati (2017) Buckling Capacity Of Cold-Formed Steel Structure Column Member With Perforation Section In Affordable House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

N

Nagalinggam, Tanagaraj (2017) Treatment Of Palm Oil Mill Effluent Odour Using Biofilter From Compost And Wood Chips Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagendran, Sharan Kumar (2017) Rippability Assessment In Hilly Terrain Of Weathered Sedimentary Rock Mass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Naserun, Nur Izzati (2018) Disinfection By-Products Precursors Removal By Simultaneous Coagulation And Disinfection In River Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nathan, Pavanithan (2017) The Effect Of Aggregate Types On The Performance Of Asphalt Mixture Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazir, Amni Umirah Mohamad (2017) Relative Humidity And Temperature Effect On Biological Contaminant At Public Access Building In Seberang Perai Selatan, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ng, Chun Hua (2018) Density And Permeability Properties Of Over Compacted Sands And Laterites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

O

OTHMAN, EZLINA (2009) The Performance Of Silica Sand For Leachate Treatment. Masters thesis, Universiti Sains Malaysia.

Ong, Ju Kit (2018) Mechanical Properties Of Reclaimed Asphalt Pavement Mixtures With Rejuvenator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Zhi Jia (2017) An Investigation On Construction Sequence Of Irregular Single Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

P

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2003) ESA 201(3) - PROSES RAWAK KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 201(3) - PROSES RAWAK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2003) ESA 202(3) - SIMULASI DAN PEMODELAN SISTEM DINAMIK APRIL 03. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 202(3) - SIMULASI DAN PEMODELAN SISTEM DINAMIK MAC 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 221E(3) - MECHANAICS OF SOLIDS NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 243(3) - AERODINAMIK NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 251(3) - TEORI SISTEM KAWALAN NOV 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 322(3) - DINAMIK STRUKTUR MAC 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa ESA 322/3 STRUCTURAL DYNAMICS (JUNE 2015). [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 341(3) - GASDINAMIK NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAA 384-2 - TEKNOLOGI PEMBINAAN OKTOBER 04. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAA 501(4) - OPERATIONAL METHODS & ENGINEERING MANAGEMENT APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAA211 - ENGINEERING MATHEMATICS FOR CIVIL ENGINEERS [MATEMATIK KEJURUTERAAN UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAA211 – ENGINEERING MATHEMATICS FOR CIVIL ENGINEERS [MATEMATIK KEJURUTERAAN UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (1993) EAA451-3 - TEORI STRUKTUR III - OKT-NOV 1993.pdf. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAG 245(3) - SOIL MECHANIC (MEKANIK TANAH) APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAG 245E(3) - SOIL MECHANICS EAG 245E(3) - MEKANIK TANAH MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EAG 345(3) - ANALISIS GEOTEKNIK APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAG 442(4) - KEJURUTERAAN GEOTEKNIK LANJUTAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG141 GEOLOGY FOR CIVIL ENGINEER [GEOLOGI UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG141 – GEOLOGY FOR CIVIL ENGINEER [GEOLOGI UNTUK JURUTERA AWAM] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAG245 – SOIL MECHANICS [MEKANIK TANAH] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAH 225(3) - HIDRAULIK MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EAH 422(4) - KEJURUTERAAN SUMBER AIR LANJUTAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAL235 – HIGHWAY AND TRAFFIC ENGINEERING [KEJURUTERAAN LEBUH RAYA DAN LALU LINTAS] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAL335 – TRAFFIC AND TRANSPORTATION ENGINEERING [KEJURUTERAAN PENGANGKUTAN DAN LALULINTAS] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS151 – STATICS AND DYNAMICS [STATIK DAN DINAMIK] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS152 – STRENGTH OF MATERIALS [KEKUATAN BAHAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS253 – THEORY OF STRUCTURES [TEORI STRUKTUR] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS254 – STRUCTURAL ANALYSIS [ANALISIS STRUKTUR] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2016) EAS354 STEEL AND TIMBER STRUCTURAL DESIGN (JUN 2016). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS664 – PRINCIPLE OF STRUCTURAL DESIGN (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS665 – BRIDGE ENGINEERING (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB 220/3 ENGINEERING POLYMERS [POLIMER KEJURUTERAAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB201/3 – ENGINEERING ECONOMY AND MANAGEMENT [ EKONOMI DAN PENGURUSAN KEJURUTERAAN] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EBB202/3 – CRYTALLOGRAPHY AND BONDING IN SOLIDS [KRISTALOGRAFI DAN IKATAN DALAM PEPEJAL] (AUGUST 2017). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2003) EUM 102(4) - MATEMATIK KEJURUTERAAN II EUM 112(4) - KAEDAH BERANGKA & STATISTIK KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 111 - MATEMATIK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 213(3) - PENYELIDIKAN OPERASI MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUM 222 - KEBANGKALIAN DAN STATISTIK GUNAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 213(2) - PERAKAUNAN PENGURUSAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 222(3) - JURUTERA DALAM MASYARAKAT MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 222(3) - JURUTERA DALAM MASYARAKAT NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUP 301(3) - PENGURUSAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2005) EUT 201(2) - TEKNIK BERFIKIR NOV 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam and PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik and PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral and PPKM, Pusat Pengajian Kejuruteraan Mekanikal and PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa and PPKK, Pusat Pengajian Kejuruteraan Kimia (2017) Web banner of International Conference of Global Network for Innovative Technology (IGNITE) and AWAM International Conference in Civil Engineering 2017. [Image]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 113-3 - BAHAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 113-3 BAHAN KEJURUTERAAN OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 113-3 ENGINEERING MATERIALS IKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 113-3 ENGINEERING MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 160(3) - KIMIA FIZIKAL BAHAN KEJURUTERAAN APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 160(3) - KIMIA FIZIKAL BAHAN KEJURUTERAAN MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 160-3 ENGINEERING PHYSICAL CHEMISTRY OF MATERIALS APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 160-3 KIMIA FIZIKAL BAHAN KEJURUTERAAN APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 202(3) - KRISTALOGRAFI & IKATAN DALAM PEPEJAL MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 210E(2) - PROCESS CONTROL MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 222-3 - REKABENTUK BAHAN KEJURUTERAAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 405E-3 - NON DESTRUCTIVE TESTING & FAILURE ANALYSIS NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 511 - TEKNIK PENCIRIAN BAHAN APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 522 CORROSIONS AND PROTECTION OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 522 CORROSIONS AND PROTECTION OCT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 524 - BAHAN KOMPOSIT APRIL 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 524-3 COMPOSITE MATERIALS OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 204(3) - BAHAN ELASTOMER MAC 2005. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 212(3) - PEMPROSESAN LATEKS MAC 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBP 415/3 FIBRE PROCESSING (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 333-3 PENCIRIAN BAHAN KEJURUTERAAN OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 417E GEOMECHANICS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 417E-3 GEOMECHANICS OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 417E-3 GEOMECHANICS OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 419E-2 BLASTING TECHNOLOGY APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 419E-2 BLASTING TECHNOLOGY APRIL-MAY 06. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 320 - MIKROPEMPROSES II NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2003) EEE 332 - PERHUBUNGAN APRIL 03. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 332 - PERHUBUNGAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 350 - SISTEM KAWALAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 432 - ANTENA DAN PERAMBATAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 223 - TERMOBENDALIR NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 423 - KEJURUTERAAN KEBOLEHPERCAYAAN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2003) EMH 211(3) - TERMODINAMIK APRIL 03. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 331E(3) - KAEDAH UNSUR TERHINGGA DALAM KEJURUTERAAN MEKANIK MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 372E(3) - PENYEJUKAN & PENYAMANAN UDARA MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 430 - KEJURUTERAAN PERISIAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMH 462E(3) - SISTEM PENUKARAN TENAGA MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 101(3) - MEKANIK KEJURUTERAAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 111(3) - STATIK NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 221(3) - KEKUATAN BAHAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 322E(3) - HINGAR DAN GETARAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 331(3) - MEKANIK PEPEJAL NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 202(3) - SISTEM PEMBUATAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 212(4) - TEKNOLOGI PEMBUATAN II MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 322E(3) - KEJURUTERAAN INDUSTRI MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 332(3) - KUALITI & KEBOLEHPERCAYAAN MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 441E(4) - PENGURUSAN PENGELUARAN NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPM 481E(3) -ERGONOMIK & KESELAMATAN INDUSTRI NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 201(3) -TEKNOLOGI PEMBUATAN I NOV 05. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RAG 121 - SAINS PERSEKITARAN 1 SEP 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 104 - MEKANIK KEJURUTERAAN APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 104 - MEKANIK KEJURUTERAAN FEB 04. [Teaching Resource]

Paid, Norazilah Mohamed (2017) Reliability Of Rapid Penang Operation In Mixed Traffic Situation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Prakas, Kumaravelu (2017) Study On The Characteristic Of Marine Dredged Sediment At Lumut Using Admixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Pusat Pengajian Kejuruteraan Awam, PPKAW (2016) EAG345 GEOTECHNICAL ANALYSIS (JAN 2016). [Teaching Resource]

Pusat Pengajian Kejuruteraan Awam, PPKAW (2016) EAH221 FLUID MECHANICS FOR CIVIL ENGINEERS (JAN 2016). [Teaching Resource]

Puzi, Nurul Fathiha Mohd (2017) The Effect Of Location For On-Site Detention (OSD) On Peak Attenuation Using Stormwater Management Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

R

Rakbi, Mohammad Firdaus (2018) Removal Of Phosphorus And Suspended Solids In Aquaculture Wastewater By Using Ferrous Sulphate In Coagulation Process Via Zeta Potential And Particle Size Measurements. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ramlan, Siti Nur Asifa (2017) Geochemical And Mineralogical Characteristics Of Selinsing Gold Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Ramli, Nur Amanina (2018) Study Of PM2.5 Concentration At School Near Road Side In Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rashid, Nur Aziemah Abd (2019) Artificial Barrier As To Enhance Removal Of E.Coli In Riverbank Filtration. PhD thesis, Universiti Sains Malaysia.

Razali, Sali Amirah (2018) Study On Mechanical And Thermal Properties Of Fired Clay Brick From Five Different States In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rohalim, Nurfatihah Idayu (2018) Determination Of Flood Inundation For Sungai Bertam By Hydraulic Physical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozi, Norainna Che (2017) Trihalomethanes Formation Potential In Groundwater And Surface Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

S

Salleh, Nur Aisyah Farhanah (2017) Removal Of Iron And Manganese Using Ejectors And Roughing Filter Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sapingi, Mohd Sharizal Mohd (2019) Adsorption Study Of Heavy Metals And Natural Organic Matters (Nom) In Groundwater Using Metakaolin. Masters thesis, Universiti Sains Malaysia.

Sazali, Mohd Asnizam (2017) Aquifer Characterization And Groundwater Potential Evaluation In The Sedimentary Rock Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Shahifulnaas, Muhammad Aiman (2017) Characterization, Delignification And Hydrolysis Of Malaysian Elephant Grass For The Recovery Of Sugar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Shubandrio, Farid Aizuddin (2018) Effects Of Partial Replacement Of Natural Aggregate By Recycled Aggregate From Asphalt Pavement On Properties Of Concrete. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sin, Jing Yao (2017) Characterization And Behaviour Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Wastewater With The Presence Of Ferrous Sulphate And Polyaluminium Chloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Surbakti, Medis Sejahtera (2017) Application Of Random Regret Minimization Model With Convexity-Concavity Parameter For Binomial Mode Choice Analysis. PhD thesis, Universiti Sains Malaysia.

Suri, Syaran (2016) Variability Effects Of Rainfall Events On Soil Erosion In Northernregion Of Peninsular Malaysia. Masters thesis, Universiti Sains Malaysia.

Susanna Liow, Soo Yee (2018) Flexural Behaviour Of Rubberized Concrete Compared To Normal Reinforced Concrete Rectangular Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

T

Tai, Joon Hong (2017) Assessment Of The Performance Loss And Repairabiity Of Earthquake Damaged Reinforced Concrete Buildings Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Chin Guan (2018) Seismic Response Analysis Of Buildings In Malaysia Subjected To Near-Field And Far-Field Ground Motions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jin Sheng (2017) The Behaviour Of LNAPL In Sand Due To Fluctuating Groundwater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Shin Ru (2018) Evaluation Of The Combined Effects Of Long Term Aging And Moisture Damage On Asphalt Mixture Incorporating Cubical Aggregates And Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Yih Ken (2018) Twin Tunnel Interaction Mechanism In Kenny Hill Formation Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Zi Guan (2018) The Effectiveness Of On-Site Detention For Water Quantity Control In Taman Ilmu Using Stormwater Management Model (SWMM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Taufik, Ruzainah Ahmad (2017) Spatial Analysis On Strong Winds Occurrence In The Northern Regionmalaysia Based On Interpolated Wind Speed And Wind Direction Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tayeh, Somia M. O. (2012) Color Removal from Synthetic Dye And Textile Wastewaters Using Adsorbent Prepared From Psyllium Husk. Masters thesis, Universiti Sains Malaysia.

Tee, Xin Lei (2018) Pedestrian Route Choice Of Vertical Facilities At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teruna, Izzul Akmal (2017) Performance Of Composite Adsorbent In River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Thai, Kim Sing (2017) Effect Of High Strength Concrete On Capacity Of Prestressed Beam For Bridge Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiffany, Ting Feng Nee (2017) Rural Area Development By Understanding Basic Infrastructure Needs Through Local Survey In Sibu, Sarawak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tommy, Huang Lick Wei (2019) Iron And Manganese Removal From Groundwater By Using Limestone Filter With Iron-Oxidizing Bacteria. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tung, Wen Yan (2018) Rock Slope Stability Assessment Using Photogrammetric Mapping And Limit Equilibrium Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

U

U Han , Thein Maung (2006) A Study On The Performance Of Limestone Roughing Filter For The Removal Of Turbidity, Suspended Solids, Biochemical Oxygen Demand And Coliform Organisms Using Wastewater From The Inlet Of Domestic Wastewater Oxidation Pond. Masters thesis, Universiti Sains Malaysia.

V

Vivian Lim, Wei Wen (2018) Study On The Behavior Of Right-Turning Vehicles At Different Types Of Unsignalised Intersections In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Von, Woei Chew (2019) Geological Evaluation Ahead Of Tunnel Face Using Tunnel Seismic Prediction Method And Japanese Highway Rock Mass Classification System. Masters thesis, Universiti Sains Malaysia.

Voon, Sze Nee (2017) Flexible Scheduling For Construction Project Using Fuzzy Logic Method And Critical Path Method (CPM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

W

W.Hussin, Assoc.Prof.Dr.W.Muhd Aminuddin (1998) Tunggukan Ukur Kadastra Negara - Kajian Statistik Dan Cabaran Juruukur Tanah. In: SEMINAR PERKEMBANGAN GEOGRAPHICAL INFORMATION SYSTEM(GIS) DALAM BIDANG UKUR TANAH., 25 APRIL 1998, POLIYEKNIK UNGKU OMAR,IPOH PERAK.

W.Hussin, Assoc.Prof.Dr.W.Muhd Aminuddin (1996) Ukur Kadastra - Pengendalian Sistem Dan Penyelesaian Masalah. In: KURSUS ASAS UKUR TANAH PERINGKAT KEBANGSAAN, 4-7 JUN 1996, LUMUT PERAK.

Wahab, Muhammad Fikri Abd (2017) Removal Of Solids, Total Coliform, E.Coli, Uv254, Colour And Turbidity Using Zeolite Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wan Hussin, Prof.Madya Dr Wan Muhd Aminuddin (1996) Pelaksanaan Sistem Ujian Berkomputer(Bahagian 1)(SLUB) Di JabatanPengangkutan Jalan Malaysia Dan Hubungannya Dengan Sistem Latihan Ujian Berkomputer. In: Jabatan Pengangkutan Jalan, 15 November 1996, Melaka.

Wan Mohd Ali, Wan Norfazlinda (2018) Investigation Of Microbiological Concentration In Indoor Air At School Classrooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Y

Yaacof, Nurashikin (2017) The Establishment Of Setback Distance For Malodour Mitigation From Palm Oil Mill. PhD thesis, Universiti Sains Malaysia.

Yap, Han Yin (2017) Optimization Of Project Duration And Constraint Resource Using Monte Carlo Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yazid, Muhammad Amar Firdauz (2018) Effect Of Ground Motion On Seismic Design Of Low To Medium Rise Infilled Moment Resisting Concrete Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yern, Chi Kian (2018) Assessment Of Structure-Specific Seismic Fragility Curves Of Buildings Using Spo2frag. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yunus, Nurul Yasarah Mohd (2017) A Study On The Extent Of Pond Accumulation Influence On Roadss Hydroplaning Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusof, Mohd Anuar Mohd (2017) Effect Of Plastering And Carbon Fibre Reinforced Polymer (CFRP) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Muhammad Firdaus (2017) Awareness Study On The Quality Assessment System In Construction (Qlassic) For Construction Works In Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Z

Zahed, Mohammad Ali (2010) Enhanced Biodegradation Of Dispersed Crude Oil Using Marine Microorganisms. PhD thesis, Universiti Sains Malaysia.

Zailan, Masezatti (2018) Prediction Of PM10 Concentration Using Multiple Linear Regression And Support Vector Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zainordin, Nazatul Syadia (2017) Association Between Walkability Index And Pedestrians’ Perspective In Reducing Exposure Of Schoolchildren To Ground Level Ozone. PhD thesis, Universiti Sains Malaysia.

Zakaria, Muhammad Norshazril Alif (2017) Thermal Comfort And Its Relation To Ventilation Approaches In Mosques. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zauki, Wan Nadhira Shaqina Wan (2017) Analysis Of Walking Accessibility To Rapid Penang Bus Services (Route 303) In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulkifly, Natasha Amiera Mohd (2017) Landfill Leachate Treatment Using Nano Composite Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zuraidi, Wan Muhammad Adib Wan (2017) Performance Of Actual And Laboratory Horizontal Roughing Filter For Turbidity And E.COLI Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

This list was generated on Sun Jun 26 15:12:59 2022 +08.
Share