Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General) > TA401-492 Materials of engineering and construction. Mechanics of materials"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 223.

Santiagoo, Ragunathan (2013) Characterization And Properties Of Polypropylene Recycled Acrylonitrile Butadiene Rubber Rice Husk Powder Composites. [Teaching Resource] (Submitted)

A

Ahmad Shah, Noor Aisyah (2007) Nanostructured Materials As Catalysts For The Production Of Gasoline From Used Palm Oil And Crude Palm Oil : Synthesis, Characterization And Activity Studies [TA418.9.N35 A299 2007 f rb]. Masters thesis, Universiti Sains Malaysia.

Ab Rashid, Nazirah (2020) Properties Of Biocompatible Mg-Zn Alloy Based Hybrid Composite Fabricated By Powder Metallurgy. PhD thesis, Universiti Sains Malaysia.

Abdullah, Nabihah (2019) Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder. Masters thesis, Universiti Sains Malaysia.

Abidin, Nurul Zawani Zainal (2019) Influence Of Acidic Calcium Phosphate Solution Concentration On The Properties Of Dicalcium Phosphate Dihydrate Coated On Β-Tricalcium Phosphate Pellets. Masters thesis, Universiti Sains Malaysia.

Abu Bakar, Nor Atikah (2020) Effect Of Hydrochloric Acid Cleaning On Nickel Foam Current Collector For Supercapacitor. Masters thesis, Universiti Sains Malaysia.

Agam, Maclive Wilkinson (2018) Limit Equilibrium And Finite Element – Shear Strength Reduction Stability Analysis, Kota Bunyih Yailings Dam, Pengkalan Hulu, Perak, Malaysia¬¬. Masters thesis, Universiti Sains Malaysia.

Ahmad, Atiqah (2018) Synthesis Of Silica Nanocolloids Encapsulated Dyes For Bio-Imaging And Bio-Labeling Applications. Masters thesis, Universiti Sains Malaysia.

Ahmad, Farrah Noor (2020) Mechanical Properties And Bioactivity Of Ti-Nb-Ha Composite Fabricated By Mechanical Alloying. PhD thesis, Universiti Sains Malaysia.

Ahmad, Mohamad Ibrahim (2016) The Velocity Impact Response Of Filled And Unfilled Polypropylene Honeycomb Core Sandwich Structure. Masters thesis, Universiti Sains Malaysia.

Ahmad, Muhammad Syafiq (2020) Effect Of Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Low Carbon Steel Using Martensite Starting Microstructure. Masters thesis, Universiti Sains Malaysia.

Ahmad Hamdi, Amirah (2018) Effect Of Magnesium And Tin As Sintering Additives On Microstructure And Compressive Properties Of Porous Aluminum. Masters thesis, Universiti Sains Malaysia.

Aldhire, Tarek Mokhtar Abubaker (2019) Effect Of Additives On Zinc Silicon Carbide Composite Coating On Mild Steel By Electrodeposition. PhD thesis, Universiti Sains Malaysia.

Alhareb, Ahmed Omran Salem (2017) Poly Methyl Methacrylate Denture Base Filled With Nitrile Butadiene Rubber And Ceramic Particles. PhD thesis, Universiti Sains Malaysia.

Ali Al-Obaidi, Nihad Khalaf (2008) Fabrication And Characterization Of Electrochemically Formed Nanocrystalline Porous Si And Gaas [TA418.9.N35 B152 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Alias, Siti Salwa (2016) Preparation And Characterization Of Porous Chitosan Membrane Soaked In Ammonium Acetate Electrolyte For Proton Batteries. PhD thesis, Universiti Sains Malaysia.

Altayef Al-Jubouri, Ali Abadi (2006) The Influence Of Equal Channel Angular Pressing Angles On The Microstructure And Properties Of Al-Si-Mg Alloy [TA483. J91 2006 f rb]. PhD thesis, Universiti Sains Malaysia.

Andre, Ningkan Gaduan (2016) Preparation, Characterisation And Micromechanical Modelling Of Resin Transfer Moulded Nonwoven Kenaf Fibre Epoxy Composites. Masters thesis, Universiti Sains Malaysia.

Anuar, Muhammad Firdaus (2019) Friction Stir Welding Of Cryorolled Al 5083 Alloy Optimization Of Process Parameters Using Taguchi Technique. Masters thesis, Universiti Sains Malaysia.

Ariawan, Dody (2016) Mechanical, Morphological, Thermal, And Durability Properties Of Resin Transfer Moulded Kenaf Fibre Reinforced Unsaturated Polyester Composites. PhD thesis, Universiti Sains Malaysia.

Arivalakan, Sarasijah (2019) Fabrication Of Iron Oxide Nanoparticles 3-Aminopropyltriethoxysilane Modified Electrode For Cd (Ii) Ions And Pb (Ii) Ions Detection. Masters thesis, Universiti Sains Malaysia.

Arshad, Norshamira (2018) Synthesis And Characterization Of Graphene Filled Epoxy And Pedot Pss Composites. Masters thesis, Universiti Sains Malaysia.

Awam, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2016/2017 Academic Session June 2017 EAS152 – Strength of Materials [Kekuatan Bahan] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

Aziz, Nazatul Shafiqah Abdul (2019) Cotton Candy Machine Explore Its Potential For Fabrication Of Polymer Microfiber For Vascular Tissue Engineering Application. Masters thesis, Universiti Sains Malaysia.

Aziz, Nur Azilina Abdul (2018) Synthesis And Electrochemical Properties Of Licoo2 Cathode With Graphite Or Graphene Anode For Aqueous Rechargeable Lithium Batteries. PhD thesis, Universiti Sains Malaysia.

Azmi, Muhammad Afiq (2018) Numerical Analysis During Encapsulation Process Of Molded Underfill With Multi Flip Chip Package. Masters thesis, Universiti Sains Malaysia.

B

Bahanurddin, Nor Fatin Khairah (2020) Potassium Sodium Niobate Formulation And Cold Isostatic Process For Improve Piezoelectric Properties. PhD thesis, Universiti Sains Malaysia.

Bakhtiar, Nur Suraya Anis Ahmad (2019) Preparation And Characterization Of Muscovite-Carbon Nanotubes Epoxy Layered Silicate Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Balakrishnan, Venugopal (2008) Biochemical Characterization Of The Interaction Between CTCF/YB-1 Transcription Factors With HPV 16 And 18 E7 Oncoprotein And Their Involvement During C-MYC Gene Regulation In Cell Proliferation Pathway [QR406. V471 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Baser, Muhammad Fadlin Hazim (2020) Isothermal Aging Of Sn-3.0ag-0.5cu And Sn100c Solder Alloys Processed Via Equal Channel Angular Pressing. Masters thesis, Universiti Sains Malaysia.

Basry, Nur Adila Amira (2020) Bioactive Surface Modification Of Ti-Nb Alloy By Alkaline Treatment In Potassium Hydroxide Solution. Masters thesis, Universiti Sains Malaysia.

Borhan, Adibah (2018) The Effects Of Core Shell Impact Modifier On Properties And Crystallization Behaviour Of Poly(Lactic) Acid. Masters thesis, Universiti Sains Malaysia.

Budiman, Faisal (2015) The Formation Of Iron Oxide Nanowires And Nanosheets By Thermal Oxidation Of Iron For Cr(Vi) Removal By Adsorption. Masters thesis, Universiti Sains Malaysia.

C

Chan, Boon Peng (2014) Mechanical And Tribological Properties Of Ultra High Molecular Weight Polyethylene With Zinc Oxide Antibacterial Agent For Joint Implant. PhD thesis, Universiti Sains Malaysia.

Chang, Boon Peng (2014) Mechanical And Tribological Properties Of Ultra High Molecular Weight Polyethylene With Zinc Oxide Antibacterial Agent For Joint Implant. PhD thesis, Universiti Sains Malaysia.

Che Ismail, Nor Hafizah (2020) Preparation, Characterisation And Properties Of Uscovite/Acrylonitrile Utadiene Styrene Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Choong, Lai Fan (2020) Investigation Of Adhesion Between Microwave Plasma Treated Epoxy And Silicone. PhD thesis, Universiti Sains Malaysia.

D

Dandan Satia, Mohd Saidina (2015) Preparation and Characterization of Calcium Copper Titanate Filled Epoxy Composites for Embedded Capacitor Applications. Masters thesis, Universiti Sains Malaysia.

Darsono, Teguh (2016) Fabrication Of Gold Nanodot On Silicon Substrate By Scanning Probe Microscopy And Its Characterization. PhD thesis, Universiti Sains Malaysia.

Daud, Shuhairiah (2017) The Effect Of Palm Kernel Shell Hybridization And Surface Treatments On Properties Of Natural Rubber Composites. Masters thesis, Universiti Sains Malaysia.

Dzulkafly, Nuur Syuhada (2018) Studies On Cleaning Efficiency Of Various Natural Rubber Latex Cleaning Compounds. Masters thesis, Universiti Sains Malaysia.

F

Fadhlullah, Solahuddin Yusuf (2017) Design And Implementation Of Human Crowd Density Estimation System With Energy Harvesting In Wireless Sensor Network Platform. PhD thesis, Universiti Sains Malaysia.

G

Ghani, Fitriah Abdul (2018) Effect Of Zn Addition On Microstructure, Intermetallic Compound Formation And Mechanical Properties Of Sn-0.7cu Solder On Cu Substrate. Masters thesis, Universiti Sains Malaysia.

H

Hadi, Nur Haslina Nasirah Abdul (2020) Investigation Of Dynamic Mechanical Properties Of Magnetorheological Elastomer Based On Nickel Zinc Ferrite And Natural Rubber. Masters thesis, Universiti Sains Malaysia.

Hamran, Noramirah (2018) Effect Of Combination Ultrasonic And Ball Milling Techniques Of Fillers Dispersion On Mechanical And Pgysical Properties Of Natural Rubber Latex Films. Masters thesis, Universiti Sains Malaysia.

Hamzah, Rostam Affendi (2017) Improvement Of Local-Based Stereo Vision Disparity Map Estimation Algorithm. PhD thesis, Universiti Sains Malaysia.

Harun, Kausar (2018) First-Principles Calculations On Solgel Zinc Oxide Nanoparticles Optoelectronic Properties. Masters thesis, Universiti Sains Malaysia.

Hasan, Nurliyana Abu (2019) Titanium Dioxide Formation Via Anodization And Thermal Oxidation For Photoreduction Of Chromium (Vi). Masters thesis, Universiti Sains Malaysia.

Hay, Mar Aung Kyaw (2020) Cdse And Tio2 Photoanode By Electrophoretic Deposition For Quantum Dot Sensitized Solar Cell. PhD thesis, Universiti Sains Malaysia.

Hlaing, Nwe Ni (2016) Synthesis, Characterization And Co2 Adsorption Of Caco3, Ca(Oh)2 And Inert Materials Incorporated Ca(Oh)2. PhD thesis, Universiti Sains Malaysia.

I

Ibrahim, Najwa (2019) Chlorination Of Nitrided Malaysian Ilmenite Concentrate Reduced With Polypropylene And Coal. Masters thesis, Universiti Sains Malaysia.

Ibrahim, Nurul Farhana (2019) Synthesize And Characterization Of Bioactive Glass Powder Based On Sio2-Cao-Na2o-P2o5 System. PhD thesis, Universiti Sains Malaysia.

Ibrahim, Suhawati (2020) Preparation Of Low Molecular Weight Natural Rubber Via Photooxidation In Latex State. PhD thesis, Universiti Sains Malaysia.

Isa, Norain (2020) Synthesis Of Silver Nanoparticles Using Kyllinga Brevifolia Extract And Immobilisation On Tio2 Nanotubes For Methyl Blue Dye Removal. PhD thesis, Universiti Sains Malaysia.

Ishak, Mohamad Nizam (2019) Electrophoretic Deposition Of Cdse Nanoparticles Photoanode For Quantum Dots Sensitized Solar Cells. PhD thesis, Universiti Sains Malaysia.

Ishak, Mohamad Izha (2004) The Effect Of Alloying Elements On Wear Behaviour Of Ni-Al [TA483. I98 2004 f rb] [Microfiche 7664]. Masters thesis, Universiti Sains Malaysia.

Ismail, Khairu Nizar (2006) Penghasilan Agregat Ringan Dari Abu Bahan Api Terhancur Sebagai Bahan Utama [TA441. K45 2006 f rb]. PhD thesis, Universiti Sains Malaysia.

Ismail, Suhaina (2005) Sintesis Dan Pencirian Zeolit Daripada Abu Terbang [TA455.F55 S947 2005 f rb] [Microfiche 8567]. Masters thesis, Universiti Sains Malaysia.

Ivy, Gan (2019) Extraction Of Nanocellulose And Characterization Of Migration Behaviour For Poly(Lactic Acid) Nanocellulose Silver Nanocomposite. Masters thesis, Universiti Sains Malaysia.

J

Jaafar, Hidayani (2019) Modified Dye-Sensitized Solar Cell (Dssc) For Enhancement Of Photovoltaic Properties. PhD thesis, Universiti Sains Malaysia.

Jalil, Aiizat Ikhwan Abdul (2020) Electricity Harvesting From Water Vapour Using Chitosan Film. Masters thesis, Universiti Sains Malaysia.

Jamaludin, Abdul Rashid (2016) Development Of High Performance Porcelain And Alumina Foam Structure For Porous Medium Burner. PhD thesis, Universiti Sains Malaysia.

K

Kamarudin, Farrah Izzatul Ain (2020) Preliminary Study On Bioceramics Containing Gallic Acid. Masters thesis, Universiti Sains Malaysia.

Karim, Ahmad Fikri Abdul (2019) Preparation And Characterization Of Kenaf Filled Natural Rubber Latex Foam. PhD thesis, Universiti Sains Malaysia.

Kasim, Shah Rizal (2008) Sintesis B - TCP Dengan Kaedah Basah Serta Penghasilan Dan Pencirian Komposit B - TCP/ CPP [TA455.C43 S525 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Keokangdong, Sengphet (2014) Development Of Porous Ceramic Clay Bodies Using Four Different Types Of Bioresource Wastes. PhD thesis, Universiti Sains Malaysia.

Khairuddin, Nur Aishahatul Syafiqa Mohammad (2019) Properties Enhancement Effect Of The Electrosprayed Carbon Nanotube Coating On Glass Fibre Epoxy Laminated. Masters thesis, Universiti Sains Malaysia.

Khan Kakar, Muhammad Rafiq (2015) Effects of adhesion failure on moisture damage of warm mix asphalt containing cecabase additive. PhD thesis, Universiti Sains Malaysia.

Kho, Chun Min (2018) Development Of Transport Phenomena Mathematical Models For Linear And Concentric Microdialysis Probes With Diffusion Limited And Convection Enhanced Operational Features. PhD thesis, Universiti Sains Malaysia.

Khor, Jia Yen (2019) Investigation Of Surface Properties For Self-Cleaning Coating On Ceramic Wall Tiles. Masters thesis, Universiti Sains Malaysia.

Khusaini, Nur Nadirah Mohd (2018) Effect Of Indium On Microstructure And Intermetallic Compound Formation During Isothermal Aging Of Sncu Solder Alloy. Masters thesis, Universiti Sains Malaysia.

Ko, Ying Hao (2008) Investigation Of Elastomeric Pad Attenuation Of Hand-Transmitted Vibration [TA455.E4 K75 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Kok Loon, Lam (2005) Morphological, Mechanical And Thermal Properties Of Amorphous Copolyester/Polyoxymethylene Blends [TA455.P58 L213 2005 f rb]. Masters thesis, Universiti Sains Malaysia.

Kudori, Siti Nurul Izzati (2020) The Effect Of Kenaf Loading And Hybridization Of Kenaf With Empty Fruit Bunch Fibers Or Halloysite Nanotube On Properties Of Natural Rubber Latex Foam. Masters thesis, Universiti Sains Malaysia.

Kwo, Han Kiu (2007) Study Of Adhesion Properties Of Natural Rubber, Epoxidized Natural Rubber, And Ethylene-Propylene Diene Terpolymer-Based Adhesives [TA455.R8 K98 2007 f rb]. Masters thesis, Universiti Sains Malaysia.

L

Lee, Kar Chun (2018) Anodization Of Titania Nanotube Arrays In Electrolyte Ontaining Hydrogen Peroxide. Masters thesis, Universiti Sains Malaysia.

Lee, Kok Onn (2007) Studies Of Convective Drying Using Numerical Analysis On Local Hardwood [TA419.A2 L478 2007 f rb]. Masters thesis, Universiti Sains Malaysia.

Leo, Choe Peng (2008) Bimodal Porous Ceramic Membrane Via Nanosized Polystryene Templating : Synthesis, Characterization And Performance Evaluation [TA455.C43 L576 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Lim, Guat Wei (2016) Molecularly Imprinted Polymer Layer Using Navicula sp. Frustules As Core Material For Lysozyme Recognition. PhD thesis, Universiti Sains Malaysia.

Lim, Kai Sheng (2018) Characterization Of Various Types Of Nanofillers Filled Crosslinked Polyethylene Composites For Cable Application. Masters thesis, Universiti Sains Malaysia.

Lim, Kar Wai (2018) Evaluation Of Pdms-Based Uv-Crosslinked Hydrogels Properties For Tissue Engineering Applications. Masters thesis, Universiti Sains Malaysia.

Lim, Zhe Xi (2020) Resistive Switching Prospects Of Aloe Vera-Based Thin Films For Nonvolatile Memory Application. PhD thesis, Universiti Sains Malaysia.

M

MOHAMED, ABDULLAHI ALI (2007) A Study On The Physical And Mechanical Properties Of Asphaltic Concrete Incorporating Crumb Rubber Produced Through Dry Process [TA443.A7 A136 2007 f rb]. PhD thesis, Universiti Sains Malaysia..

Mahzan, Saiful Lizan (2004) Kesan Rawatan Haba Terhadap Sifat-Sifat Fizikal, Mekanikal Dan Daya Ketahanan Rotan Manau (Calamus manan) [TA418.95. S132 2004 f rb] [Microfiche 8165]. Masters thesis, Universiti Sains Malaysia.

Mat, Nurus Sakinah Che (2018) Curing, Mechanical And Aging Properties Of Bentonite Filled Ethylene Propylene Diene Monomer Composites. Masters thesis, Universiti Sains Malaysia.

Md Hanafiah, Faizal (2008) Kajian Prestasi Mortar Terubahsuai Bergentian Semulajadi Di Dalam Persekitaran Agresif [TA436. F175 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Md Sani, Nur Ariffah (2015) Development Of Ternary Ni-Ag-P And Ni-Cu-P Using Electroless Coating On Copper Substrate. Masters thesis, Universiti Sains Malaysia.

Mekanik, Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018 / January 2019 EMM 213 – Strength of Materials [Kekuatan Bahan] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018 / January 2019 EMM 213 – Strength of Materials [Kekuatan Bahan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2019) Second Semester Examination Academic Session 2018/2019 June 2019 EPM322 – Industrial Engineering [Kejuruteraan Industri] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted)

Misman, Muhammad Afiq (2017) The Effect Of Amino Functional Starch On The Mechanical And Degradation Properties Of Carboxylated Nitrile Butadiene Rubber Latex Films. PhD thesis, Universiti Sains Malaysia.

Mohamed, Julie Juliewatty (2003) Penghasilan Dan Pencirian Komposit Matriks Zn Diperkuat Partikel SiC Melalui Kaedah Metalurgi Serbuk. [TA418.9.C6 J94 2003 f rb] [Microfiche 7546]. Masters thesis, Universiti Sains Malaysia.

Mohammad, Nur Farahiyah (2017) Synthesis And Characterization Of Mesoporous Carbonated Hydroxyapatite For Drug Delivery Application. PhD thesis, Universiti Sains Malaysia.

Mohammadi, Hossein (2019) Synthesis And Characterization Of Strontium And Cobalt Doped Akermanite Bioceramics. PhD thesis, Universiti Sains Malaysia.

Mohd Salim, Nurul Nadia (2017) Effects Of Strontium And Samarium Dopants On The Dielectric Properties Of Nickel Oxide. Masters thesis, Universiti Sains Malaysia.

Mohd Zaini, Nurul Aizan (2020) Preparation And Properties Of Sepiolite-Filled Ethylene Propylene Diene Terpolymer Composites. PhD thesis, Universiti Sains Malaysia.

Mokhtar, Ahmad Kamil Fakhruddin Mohd (2017) Fabrication Of Porous Cordierite By Gelcasting Method. Masters thesis, Universiti Sains Malaysia.

Mutalib, Nor Azaniza Abdul (2015) Innovative Approach For Production Of Epoxy Syntactic Foams Consisting Of Epoxy Hollow. Masters thesis, Universiti Sains Malaysia.

Muthalib, Nurhidayah Abdul (2019) Raw Material Characterization And Reductive Leaching Of Low Grade Manganese Ore With Bamboo Sawdust In Sulphuric Acid. Masters thesis, Universiti Sains Malaysia.

Muttalib, Siti Nadzirah Abdul (2017) Effect Of Different Filler Preparation Method On Properties Of Natural Rubber Palygorskite Nanocomposites. Masters thesis, Universiti Sains Malaysia.

Myo, Thuya Thein (2016) Synthesis And Characterization Of Wox Zno Nanocomposites On Polyethylene Terephthalate (Pet) Fiber For Photocatalytic Application. PhD thesis, Universiti Sains Malaysia.

N

Nguyen, Hoang Trinh (2019) Development Of Palm Kernel Oil Polyol - Based Shape Memory Polyurethane With Polyethylene Glycol (Peg) And Poly Caprolactone (Pcl) As Soft Segment. Masters thesis, Universiti Sains Malaysia.

Noh, Mohamad Zaky (2008) Studies On The Performance Of Mild Steel-Alumina Joining Fabricated Via Friction Welding [TA470. Z21 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Noordin, Norasiah Mohammad (2017) Optimization of silver nanoparticles sizes in ag-cu nanopaste as die-attach materials for high temperature applications. Masters thesis, Universiti Sains Malaysia.

Nor, Nor Aina Mohd (2017) Synthesis Of Natural Rubber Palygorskite Composite Via Combine Latex Compounding And Melt Mixing. Masters thesis, Universiti Sains Malaysia.

Norazman, Muhammad Anas (2017) The Effect Of Pre - Treatment Followed By Cryorolling On The Microstructures, Mechanical Properties And Corrosion Behaviour Of Al 5052 Alloy. Masters thesis, Universiti Sains Malaysia.

Nosbi, Norlin (2017) The Synthesis, Functionalisation And Characterisation Of Carbon Nanotubes Alumina Hybrid Compound And Its Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Nyein, Nyein (2017) Optimized Fabrication Of Tio2 Nanotube Arrays By Anodization For Solar Cell Applications. PhD thesis, Universiti Sains Malaysia.

O

Ong, Pek Ling (2009) Hydrothermal Process Route In The Synthesis Of Zinc Oxide Powder. Masters thesis, Universiti Sains Malaysia.

Onimisi, Jimoh Abdullateef (2017) Industrial And Geological Study Of Protozoic Metacarbonate Rocks From Southern And Central Nigeria. PhD thesis, Universiti Sains Malaysia.

P

PPJJ, Pusat Pengajian Jarak Jauh (2005) JIF 419 - SAINS BAHAN MAC 05. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2006) ESA 221(3) - SOLID MECHANICS OKT - NOV 06. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2007) ESA 221(3) - SOLID MECHANICS OKT-NOV 07. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2004) ESA 221E(3) - MECHANICS OF SOLIDS OKT 04. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2007) ESA 224(3) - MACHINING AND MATERIALS PROCESSING APRIL 07. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2006) ESA 224(3) - PEMESINAN DAN PEMPROSESAN BAHAN APR-MEI 06. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2003) ESA 224(3) - PEMESINAN DAN PEMPROSESAN BAHAN FEB-MAC 03. [Teaching Resource]

PPKA, Pusat Pengajian Kejuruteraan Aeroangkasa (2005) ESA 224(3) - PEMESINAN DAN PEMPROSESAN BAHAN MAC 05. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (1995) EAA452-3 - REKA BENTUK STRUKTUR LANJUTAN - APRIL 1995.pdf. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (1997) EAS 281-3 - TEKNOLOGI KONKRIT DAN KAEDAH BINAAN SEPT 1997. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2016) EAS152 STRENGTH OF MATERIALS (JUN 2016). [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2017) EAS152 – STRENGTH OF MATERIALS [KEKUATAN BAHAN] (AUGUST 2017). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBB 113 ENGINEERING MATERIALS (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 160-3 KIMIA FIZIKAL BAHAN KEJURUTERAAN FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBB 202/3 CRYSTALLOGRAPHY & BONDING IN SOLIDS (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 222-3 DESIGN OF ENGINEERING MATERIALS OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 224-3 REKABENTUK BAHAN KEJURUTERAAN OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 236-3 MATERIALS THERMODYNAMICS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 245-3 CHARACTERISATION OF ENGINEERING MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 318-3 - TEMBIKAR PUTIH & KACA SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1996) EBB 318-3 - TEMBIKAR PUTIH DAN KACA OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 345-3 CHARACTERISATION OF ENGINEERING MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 345-3 PENCIRIAN BAHAN KEJURUTERAAN OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 405E NON-DESTRUCTIVE TESTING OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 511 MATERIALS CHARACTERISATION TECHNIQUES OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 511-3 - MATERIALS CHARACTERISATION TECHNIQUES NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 511-3 MATERIALS CHARACTERIZATION TECHNIQUES MAY 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 511-3 MATERIALS CHARACTERIZATION TECHNIQUES OCT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 511-3 MATERIALS CHARACTERIZATION TECHNIQUES OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 522-3 - CORROSION & PROTECTION NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 524-3 - COMPOSITE MATERIALS NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 524-3 COMPOSITE MATERIALS MAY 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 524-3 COMPOSITE MATERIALS OCT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 524-3 COMPOSITE MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 551-4 - MATERIALS CHARACTERISATION NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1993) EBB303-2 - KAKISAN DAN DEGRADASI - Jun 1993. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1991) EBB303-2 - KAKISAN DAN DEGRADASI - OKT-NOV 1991. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1992) EBB303-2 - KAKISAN DAN DEGRADASI - OKT-NOV 1992. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1993) EBB303-2 - KAKISAN DAN DEGRADASI - OKT-NOV 1993. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBB303-2 - KAKISAN DAN DEGRASI - OKT-NOV 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB316-3 - KAKISAN DAN DEGRASI - SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB324-4 - BAHAN TERMAJU DAN KOMPOSIT - JUN 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1991) EBB405-3 - ANALISIS KEGAGALAN DAN UJIAN TAK MUSNAH - OKT-NOV 1991. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1992) EBB405-3 - ANALISIS KEGAGALAN DAN UJIAN TAK MUSNAH - OKT-NOV 1992. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1993) EBB405-3 - ANALISIS KEGAGALAN DAN UJIAN TAK MUSNAH - OKT-NOV 1993. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBB405-3 - ANALISIS KEGAGALAN DAN UJIAN TAK MUSNAH - OKT-NOV 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB405-3 - FAILURE ANALYSIS AND NON-DESTRUCTIVE TESTING - NOVEMBER 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB405-3 - PENYIASATAN KEGAGALAN DAN UJIAN TAK MUSNAH - SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1992) EBB406-3 - PEMILIHAN BAHAN - MAC-APRIL 1992. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBB406-3 - PEMILIHAN BAHAN -APRIL 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1995) EBB406-3 - PEMILIHAN BAHAN -APRIL 1995. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBB406-3 - PEMILIHAN BAHAN -JUN 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB511-3 - MATERIALS CHARACTERISATION TECHNIQUES - JUN 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB511-3 - TEKNIK-TEKNIK PENCIRIAN BAHAN - SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBP 204-3 BAHAN ELASTOMER APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBP 204-3 ELASTOMERIC MATERIALS APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 303 PLASTIC MATERIALS OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 303-3 - PLASTIC MATERIALS NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 400-3 - REKABENTUK PRODUK & ANALISIS KEGAGALAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP400-3 - PRODUCT DESIGN AND FAILURE ANALYSIS - NOVEMBER 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP415-3 - FIBRE PROCESSING - NOVEMBER 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBS 417/3 GEOMECHANIC (JAN 2016). [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMM 213 STRENGTH OF MATERIALS [KEKUATAN BAHAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 221(3) - KEKUATAN BAHAN MEI 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2004) EMM 221(3) - KEKUATAN BAHAN OKT 04. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMM 221(3) - KEKUATAN BAHAN OKT-NOV 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 221(3) - STRENGTH OF MATERIALS OCT-NOV 07. [Teaching Resource]

Pang, Ai Ling (2018) Compatibility And Degradability Of Kenaf-Filled Linear Low Density Polyethylene Polyvinyl Alcohol Composites. PhD thesis, Universiti Sains Malaysia.

Phan, Chee Hong (2015) Fabrication And Properties Of Electromagnetic Interferences Shielding Epoxy Composites For Electronic Packaging Application. Masters thesis, Universiti Sains Malaysia.

Phoumiphon, Nordala (2017) Effect Of Annealing On Microstructure And Mechanical Properties Of 0.06% Carbon Steel. PhD thesis, Universiti Sains Malaysia.

Poh, Koon Poo (2004) Pembangunan Konkrit Ringan Menggunakan Polisterena, Serbuk Aluminium Dan Kayu Dalam Kejuruteraan Awam [TA439. P747 2004 f rb] [Microfiche 7540]. Masters thesis, Universiti Sains Malaysia.

Prastomo, Niki (2007) Synthesis And Characterization Of Low Bandgap Nanocrystalline T-Zirconia [TA418.9.N35 N692 2007 f rb]. Masters thesis, Universiti Sains Malaysia.

Putra Jaya, Ramadhansyah (2008) Kesan Agregat Berkubik Dan Pengusiaan Ke Atas Sifat Kejuruteraan Konkrit Asfalt ACW14 [TA441. R165 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

R

RamlI, Nurul Hidayah (2020) Platinum Nanodendrites Modified Electrode For Lead (Pb) Detection. Masters thesis, Universiti Sains Malaysia.

Rashid, Mohamad Rohaidzat Mohamed (2018) Synthesis And Evaluation Of Geopolymer Properties Using Sago Pith Waste Ash. PhD thesis, Universiti Sains Malaysia.

Rashid, Tuan Nur Izzah Tuan Ab (2018) Effect Of Ca Addition On Piezoelectric And Dielectric Properties In b0.93la0.02sr0.05(Zr0.52ti0.48)O3 (Plszt) System. Masters thesis, Universiti Sains Malaysia.

Razy, Ahmad Hafiz Mohamad (2018) Design And Implementation Of Liquid-Based Fine-Tunable Solenoid Mems Inductor. Masters thesis, Universiti Sains Malaysia.

Redin, Hanna Bakar (2019) Effect Of Aging Time, Calcination And Sintering Temperature To Β-Tricalcium Phosphate (Β-Tcp). Masters thesis, Universiti Sains Malaysia.

Ridhuan, Nur Syafinaz (2019) Functionalization Of Zinc Oxide Nanorods For Glucose Biosensor Application. PhD thesis, Universiti Sains Malaysia.

Robin, Ong Su Kiat (2016) Time Domain Reflection Method To Detect Copper Wire Micro Crack Weld Defect. PhD thesis, Universiti Sains Malaysia.

Rodzi, Siti Nur Hazwani Mohamad (2015) Properties Of Biocompatible Mg-Zn Hydroxyapatite Composites Fabricated By Different Powder Mixing Techniques. Masters thesis, Universiti Sains Malaysia.

Rosdi, Muhamad Ridhwan Hafiz (2016) Preparation And Development Of An Ethylene Vinyl Acetate (Eva) Copolymer Emulsification System For Pour Point Depressant (Ppd) Application. Masters thesis, Universiti Sains Malaysia.

Roslan, Putri Nur Salsabila (2020) Properties Of Glass Fibre Epoxy Laminated Composites With Electrospray Of Different Carbon Nanotubes Concentrations. Masters thesis, Universiti Sains Malaysia.

S

Saharudin, Khairul Arifah (2015) Development Of Nonmetal-Doped Tio2 Nanotube Photocatalyst For Decolorization Of Methyl Orange. PhD thesis, Universiti Sains Malaysia.

Saleh, Siti Shuhadah Md (2017) Synthesis And Properties Of Phenolic Based Hybrid Carbon Nanotube Inorganic Filled Composites. PhD thesis, Universiti Sains Malaysia.

Salleh, Siti Zuliana (2017) Natural Rubber Recycled Chloroprene Rubber Blends Preparation And Properties. PhD thesis, Universiti Sains Malaysia.

Samsudin, Mohd Shamsul Farid (2008) Rheological Behavior Of Talc And Calcium Carbonate Filled Polypropylene Hybrid Composites [TA455.P58 S528 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Sapari, Nur Khafiza (2018) Anisotropic Shear Behavior Of Jointed Rock Masses At Ulu Jelai Hydroelectric Project, Pahang. Masters thesis, Universiti Sains Malaysia.

Satia, Mohd Saidina Dandan (2019) Fabrication And Characterization Of Graphene-Based Ink. PhD thesis, Universiti Sains Malaysia.

Shahri, Ali Tolooiyan (2008) Analyses On The Stability Of Irrigation Channel Embankment With Geosynthethic Reinforcement [TA455.G44 S525 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Sia, Chen How (2007) Theoretical Studies Of Dielectric Susceptibility In Ferroelectric Thin Film [TA418.9.T45 S563 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Siddiqui, Maliha (2016) Effect Of Li2co3 Addition On The Piezoelectric And Dielectric Properties Of Pb0.93la0.02sr0.05(Zr0.52ti0.48)O3 Ceramics. Masters thesis, Universiti Sains Malaysia.

Soaid, Nurul Izza (2019) Synthesis Of Free Standing Anodic Zro2 Nanotubes In Potassium Carbonate Ethylene Glycol Electrolyte For Photocatalyst Application. Masters thesis, Universiti Sains Malaysia.

Surya, Indra (2016) The Potential Of Alkanolamide As A New Additive In Natural And Synthetic Rubber Compounds. PhD thesis, Universiti Sains Malaysia.

Sutanto, Nelvi (2019) Photodegradation Performances Of Low-Density Polyethylene Composites Loaded With Photocatalysts. PhD thesis, Universiti Sains Malaysia.

Syukron, Muhammad (2016) Effect Of Heat Treatment And Equal Channel Angular Pressing On The Microstructures, Hardness And Wear Resistance Of A356 Aluminium Alloy With Tib2. PhD thesis, Universiti Sains Malaysia.

T

Taib, Mustaffa Ali Azhar (2018) Formation Of Tio2nanotubular Structure In Fluorinated Ethylene Glycol Electrolytes Containing Additives By Anodisation. PhD thesis, Universiti Sains Malaysia.

Tan, Pi Lin (2017) Metalloporphyrins Based Semiconducting Thin Films Deposition And Characterization For Organic Field Effect Transistor. PhD thesis, Universiti Sains Malaysia.

Teo, Pao Ter (2016) Utilization Of Electric Arc Furnace Steel Slag As Partial Replacement Of Raw Materials In Ceramic Tile. PhD thesis, Universiti Sains Malaysia.

Teoh, Cherh Yi (2008) Performance Evaluation Of Steel Slag As Natural Aggregates Replacement In Asphaltic Concrete [TA445.5. T314 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Teoh, Hui Chiang (2018) Fabrication And Optimization Of Cyanoacrylate Nanocomposites For Ion Beam Etching Process On Hard Disk Slider. PhD thesis, Universiti Sains Malaysia.

Tham Cho Yin, Cho Yin (2015) Preparation of Poly (LACTIC ACID) (PLA) Microspheres for Drug Delivery System. Masters thesis, Universiti Sains Malaysia.

U

Udayakumar, Sanjith (2019) Characterization And Alkaline Fusion Recovery Process Of Rare Earths And Thorium From Malaysian Monazite. Masters thesis, Universiti Sains Malaysia.

Ullah, Faheem (2018) Synthesis, Characterization And Physicochemical Investigations Of Chitosan Built Hydrogel For Controlled Drug Delivery Applications. PhD thesis, Universiti Sains Malaysia.

W

Wong, Wai Yee (2017) Fabrication Of 3d Porous Beta Tricalcium Phosphate Bone Scaffold Coated By Oly(Vinyl Alcohol) And Poly(Lactic Acid)_. Masters thesis, Universiti Sains Malaysia.

Y

Yap, Gay Suu (2008) Studies On Mechanical Properties Of Poly (Methyl Methacrylate) And Poly (Methyl Methacrylate) - Modified Natural Rubber Blend [TA455.P58 Y25 2008 f rb]. Masters thesis, Universiti Sains Malaysia.

Yaraghi, Ali (2020) Investigation Of Potential Weathered Ree-Bearing Granitoid Crust From Dinding District Of Western Tin Belt, Peninsular Malaysia. PhD thesis, Universiti Sains Malaysia.

Yeoh, Cheow Keat (2008) Synthesis And Characterization Of Barium Titanium Oxide (Batio3) And Calcium Copper Titanium Oxide (Cacu3ti4o12) Pellets And Thin Films [TA455.C43 Y46 2008 f rb]. PhD thesis, Universiti Sains Malaysia.

Z

Zaaba, Nor Fasihah (2017) Preparation, Characterization, Properties And Degradation Behaviour Of Peanut Shell Powder Recycled Polypropylene Composites. PhD thesis, Universiti Sains Malaysia.

Zainudin, Harmiza (2018) Effect Of Magnesium-Silicon Substitution On The Characteristics Of Carbonated Hydroxyapatite For Synthetic Bone. Masters thesis, Universiti Sains Malaysia.

Zakaria, Muhammad Razlan (2020) Woven Carbon Fiber Epoxy Composite Laminates Reinforced With Carbon Nanotube Interlayer Using Electrospray Deposition Method. PhD thesis, Universiti Sains Malaysia.

Zakaria, Siti Aminah (2018) Microstructure Analysis, Mechanical Properties And Corrosion Behaviour Of Cryorolled Aluminium 1100 Alloy With Different Heat Treatment. Masters thesis, Universiti Sains Malaysia.

Zaman, Rosyaini Afindi (2018) Synthesize And Characterization Of Al2o3–, Batio3–, Tio2–, Cuo–Ccto Composites For Wideband Dielectric Resonator Application. PhD thesis, Universiti Sains Malaysia.

This list was generated on Wed Jan 27 05:32:49 2021 +08.
Share