Items where Subject is "T Technology > T Technology (General) > T1-995 Technology(General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | - | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z |
Number of items at this level: 1798.

Amouzgar, Parisa (2011) Development And Properties Of Resin Impregnated Microwave Dried Oil Palm Trunk Core Lumber. Masters thesis, Universiti Sains Malaysia.

Ng, Boon Sing (1994) Kajian Kesan Abu Sekam Padi Ke Atas Sifat-Sifat Pematangan Dan Fizikal Bagi Getah Asli Terepdksida. Masters thesis, Universiti Sains Malaysia.

Rahiman, Muhammad Iqmal (2015) Effect of Chemical Treatments of Banana Leaf On The Physical Properties. Masters thesis, Universiti Sains Malaysia.

Rajah, Siva Balan Rukumangatha (2014) Characterization And Properties Of Selected Biomass Nanofiller Reinforce Advanced Ceramic. PhD thesis, Universiti Sains Malaysia.

Roslan , Rohaizu (2015) Isolation And Characterization Tempo Oxidized Nanocrystalline Cellulose From Oil Palm Empty Fruit Bunch. PhD thesis, Universiti Sains Malaysia.

Woon, Hon Wei (2005) Investigation On The Properties Of Thermoplastic Elastomers (Tpes) Based On Blends Of Recycle Polyethylene (Rpe) I Ethylene-Propylene-Diene Terpol Ymer (Epdm). Masters thesis, Universiti Sains Malaysia.

-

-, Md. Abu Hanif (2006) Physico-Chemical Changes Of Gluten Matrix As A Result Of Maillard Reaction With Glucose. PhD thesis, USM.

.

., Eti Indarti (2017) Poly(Lactic Acid) Bionanocomposites Reinforced With Tempo-Oxidized Oil Palm Empty Fruit Bunch Nanocrystalline Cellulose. PhD thesis, Universiti Sains Malaysia.

., Muthia Dewi (2012) Quality And Stability Of Duck Sausages. Masters thesis, Universiti Sains Malaysia.

A

Abustan, I and Sulaiman, A H and Abdul Wahid, N (2008) Urban Rainfall-Runoff Study To Validate The Design Chart In The Malaysian Urban Storm Water Management Manual (MSMA). In: 11th International Conference on Urban Drainage, Edinburgh, 31 AUGUST - 5 SEPTEMBER 2008, Scotland, UK.

A.Aziz, Zabedah (2015) Reka Bentuk, Pembangunan Dan Penilaian Koswer Multimedia Pembelajaran Tajwid Terhadap Kefahaman Dan Kemahiran Bacaan Al-Quran Murid Sekolah Menengah. PhD thesis, Perpustakaan Hamzah Sendut.

Ab Ghani, A and Zakaria, Nor Azazi and C, K Chang and Ainan, A (2008) Sustainable Urban Drainage System (SUDS) – Malaysian Experiences. In: 11th International Conference on Urban Drainage, Edinburgh, 31 AUGUST - 5 SEPTEMBER 2008, Scotland, UK.

Ab Kadir, Mohd Omar (2015) Semi-continuous extraction of palm kernel oil from palm kernels using supercritical carbon dioxide (SC-C02) with solvent recycling system. Project Report. Universiti Sains Malaysia. (Submitted)

Ab. Rahman, Nur Ain (2018) The Effects Of Enzyme Inhibition On The Myristicin Content And The Quality Parameters Of Nutmeg (Myristica Fragrans) Pickles. Masters thesis, Universiti Sains Malaysia.

Abbas, Syed Zaghum (2014) Isolation And Characterization Of Cadmium Resistant Bacteria From Industrial Wastewater. Masters thesis, Universiti Sains Malaysia.

Abbas, Syed Zaghum (2014) Isolation And Characterization Of Cadmium Resistant Bacteria From Industrial Wastewater. Masters thesis, Perpustakaan Hamzah Sendut.

Abd Aziz, Azniwati (2009) Kesan Penambahan Pengisi Montmorilonit Terhadap Sifat-Sifat Komposit Kenaf-Polipropilen. Masters thesis, Universiti Sains Malaysia.

Abd Karim, Norani (2017) Modified Oil Palm Starch As A Potential Binder For Particleboard. PhD thesis, Universiti Sains Malaysia.

Abd Samat, Siti Nuraya (2022) Anti-Freeze Stabilizer System Based On Azidated Glycerol For Natural Rubber Latex. PhD thesis, Perpustakaan Hamzah Sendut.

Abd. Rahim, Rohaidah (1996) Kajian Penggunaan Semula Lateks Getah Asli Lampau Matang. Masters thesis, Universiti Sains Malaysia.

Abdalla Al - Zrog, Abdalla Mohamed (2014) Heavy Metals Uptake By Chilli Plants (Capsicum Annuum L.) Planted In Rice Husk Char And Coco Peat Media. Masters thesis, Universiti Sains Malaysia.

Abdaslam Shaah, Marwan Abdulhakim (2022) Synthesis Of Bio-Aviation Fuel From Candlenut (Aleurites Moluccanus) Oil Using Supercritical Carbon Dioxide Extraction. PhD thesis, Perpustakaan Hamzah Sendut.

Abdelrahman Alothman, Mohammad Nazih (2009) The Changes In The Antioxidant Capacity Of Selected Tropical Fruits Upon Treatment With Gaseous Ozone And Ultraviolet C Radiation [T1-995]. Masters thesis, Universiti Sains Malaysia.

Abdul Aziz, Noor Aziah (2012) Utilization of Mango (Mangifera indica L.variety Chok Anan peel.A Nen generation fibre ingredient In bread. Technical Report. Universiti Sains Malaysia.

Abdul Halim, Nur Nadia Adila (2021) Risk Assessment Of Occupational Accidents In The Construction Industry In The Northern Region Of Peninsular Malaysia. Masters thesis, Universiti Sains Malaysia..

Abdul Hamid, Zubaidah Aimi (2011) Analysis Of Sap Sugar And Starch Content Of Felled Oil Palm Trunks At Different Storage Time. Masters thesis, USM.

Abdul Hamid, Zubaidah Aimi (2016) Accumulation Of Carbohydrate Reserve And Its Composition In Oil Palm Trunk. PhD thesis, Universiti Sains Malaysia.

Abdul Sukor, Nur Amiranajwa (2015) Nano Hybrid Oil Palm Ash/Shell Filled Kenaf Fiber Reinforced Vinyl Ester Composites. Masters thesis, Universiti Sains Malaysia.

Abdul Wahid, Nur Hafizah (2021) Effects Of Heat Moisture Treatment On The Physicochemical Properties Of Legume Flours. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Abdul Wahid, Nur Hafizah (2021) Effects Of Heat Moisture Treatment On The Physicochemical Properties Of Legume Flours. Project Report. Pusat Pengajian Teknologi Industri.

Abdul wahab Taiwo, Owolabi Folahan (2016) Alkaline Peroxide Mechanical Pulping Of Oil Palm Fronds Vascular Bundle Fibres. PhD thesis, Universiti Sains Malaysia.

Abdullah, Jamaluddin and Hassan, Ahmad Yusoff (2005) Rapid Prototyping In Orthopeadics: Principles And Applications. In: Bone Grafts And Bone Substitutes. World Scientific Publishing , Singapore, pp. 547-561. ISBN 981-256-089-0

Abdullah, Nor Fatihah (2017) Production Of Red Mud Composite As Coagulant For Harvesting Chlorella Vulgaris. Masters thesis, Universiti Sains Malaysia.

Abdullah, Uthumporn Utra @ Sapina (2016) Investigation on the effect of tea polyphenol extracts to digestion properties. Technical Report. Universiti Sains Malaysia.

Abiodun, Ajijolakewu Kamoldeen (2017) Co-Hydrolysis Of Oil Palm Empty Fruit Bunch Fibres By Commercial Cellulase And Crude Xylanase SOURCED FROM Aspergillus Niger USM SD2 AND Trichoderma Asperellum USM SD4 Towards Bio-Ethanol Production. PhD thesis, Universiti Sains Malaysia.

Abobaker, Mahmod Sidati Ali (2023) Treatment Of Leachate By Scenedesmus Sp. Via Different Modestypes Of Bioreactors And Its Potential For Bioethanol Production. PhD thesis, Universiti Sains Malaysia.

Abu Bakar, Azizah (2012) Penghasilan Komposit Poliuretana-Kenaf Menggunakan Pengacuanan Tidak Balas Suntikan. PhD thesis, Perpustakaan Hamzah Sendut.

Adilla Mahmud, Nur (2020) Enzymatic Hydrolysis And Lactic Acid Bacteria Fermentation Of Okara. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Affandi, Norhazirah and Zzaman, Wahidu and Yang, Tajul Aris and Mat Easa, Azhar (2017) Production of Nigella sativa Beverage Powder under Foam Mat Drying Using Egg Albumen as a Foaming Agent. beverages, 3 (9). pp. 1-15. ISSN 2306-5710

Ahamad Zabidi, Mardiana (2008) Effects Of Partial Substitution Of Wheat Flour With Chempedak (Artocarpus Integer) Seed Flour On The Physicochemical, Organoleptic And Microbiological Attributes Of The Bread. Masters thesis, Universiti Sains Malaysia.

Ahmad, Harlina (2017) Suitability study of pressmud as an alternative materials for landfill soil cover amendment for minimizing leaching capability of heavy metals. Technical Report. Universiti Sains Malaysia.

Ahmad, Mardiana Idayu (2017) Design and development of a membrane-based energy recovery systm integrated with turbine ventilator for building application in hot-humid climate. Technical Report. Universiti Sains Malaysia.

Ahmad, Mohd. Nizam (2004) Aplikasi Pengoptimuman Berbilang Kriteria Pada Rekabentuk Femur Palsu (Artificial Hip Prosthesis) Untuk Mengurangkan Hadangan Tegasan (Stress Shielding). Masters thesis, Perpustakaan Hamzah Sendut.

Ahmad, Noor Afiqah (2017) Crosslinking Of Alkaline Peroxide Oil Palm Empty Fruit Bunch Fibres Via Azide-Alkyne Click Chemistry: Synthesis And Characterization. Masters thesis, Universiti Sains Malaysia.

Ahmad, Nor Afiqah (2020) Survival And Heat Resistance Of Salmonella Enterica Serovar Weltevreden In Blanched Vegetables At Different Temperatures. Project Report. Universiti Sains Malaysia. (Submitted)

Ahmad, Nur Anis (2016) Risk Assessment And Occupational Exposure Of Pesticides Among Paddy Farmers In Kampung Permatang Keriang, Pulau Pinang, Malaysia. Masters thesis, Universiti Sains Malaysia.

Ahmad, Syuhairah (2016) Effect Of Vegetable Incorporation On The Nutritional And Shelf Life Qualities Of Chicken-Based Sausage-Like Product. Masters thesis, Universiti Sains Malaysia.

Ahmad Tamezi, Raihan Amani (2021) Physical And Antioxidant Properties Of Cassava-based Rice Analogue. Other. Universiti Sains Malaysia. (Submitted)

Akhtar, Naseem (2023) Characterization And Environmental Sustainability Assessment Of Groundwater System As An Auxiliary Resource For Paddy Irrigation In Labu Kubong, Teluk Intan, Perak. PhD thesis, Universiti Sains Malaysia.

Al Ogaili, Riyadh Rahef Nuiaa (2023) An Enhanced Mechanism To Detect Drdos Attacks On Dns Using Adaptive Thresholding Technique. PhD thesis, Perpustakaan Hamzah Sendut.

Al-Hassan, Ahmed Ali S. (2011) Development And Characterization Of Edible Films From Sago Starch/Surimi By-Products Fish Gelatin Blends. PhD thesis, Universiti Sains Malaysia.

Al-Nemrat, Asem Mustafa Moh’ad (2019) Modified Sumudu Transform Analytical Approximate Methods For Solving Boundary Value Problems. PhD thesis, Universiti Sains Malaysia.

Aladaileh, Mohammad Adnan Ahmad (2021) Generalized Entropy-Based Approach With A Dynamic Threshold To Detect Ddos Attacks On Software Defined Networking Controller. PhD thesis, Perpustakaan Hamzah Sendut.

Alfatah, Tata (2023) Properties And Characterization Of Lignin Nanoparticles Reinforced Biopolymer Films. PhD thesis, Perpustakaan Hamzah Sendut.

Alhamead Al Absi, Basim Ahmad Abed (2020) Secure-Rpl: Approach To Prevent Resource-Based Attacks In Wireless Sensor Networks Using Balanced Clustering. PhD thesis, Universiti Sains Malaysia.

Alif Faiz Mohd Din, Muhammad (2020) Extraction Of Secondary Metabolite In Tetraselmis Suecica Using Different Solvent Polarity. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Allafi, Faisal Aboelkasim Salem (2022) Cleaning And Sterilization Of Sheep Wool Fiber Using Supercritical Carbon Dioxide. PhD thesis, Perpustakaan Hamzah Sendut.

Alrawi, Reem A. and Nik Ab Rahman, Nik Norulaini and Ahmad, Anees and Ismail, Norli and A. K., Mohd Omar (2013) Characterization of Oily and Non-Oily Natural Sediments in Palm Oil Mill Effluent. Journal of Chemistry, 2013 (298958). pp. 1-11. ISSN 2090-9063

Alsaedi, Alyaa Abdulhussein Kareem (2023) Antibiotic Resistance Microbial Inactivation And Lipid Extraction From Sewage Sludge For Biodiesel Production Using Supercritical Co2 Technology. PhD thesis, Universiti Sains Malaysia.

Amar, Kifayah (2002) Kajian Pelaksanaan Kualiti Dalam Organisasi-Organisasi Pengeluaran Di Indonesia. Masters thesis, Universiti Sains Malaysia.

Amin, Siti Faridah Mohd (2009) Development Of Reduced Calorie Chocolate Cake With Jackfruit Seed (Artocarpus Heterophyllus LAM.) Flour And Polydextrose Using Response Surface Methodology (RSM) Programmed. Masters thesis, Universiti Sains Malaysia.

Amir, Sazereen (2021) Physicochemical And Rheological Properties Of Fish Gelatin Modified By Tannic Acid. Other. Universiti Sains Malaysia. (Submitted)

Anandita, Nadira (2020) Optimization Of Power From Food Waste Using Membrane-less Microbial Fuel Cell. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Anandita, Nadira (2020) Optimization Of Power From Food Waste Using Membrane-Less Microbial Fuel Cell. Other. Universiti Sains Malaysia. (Submitted)

Anbalagan, Lavanya (2022) Halochlorella Rubescens Cultivation In Photobioreactors For Optimum Lipid Production. Masters thesis, Perpustakaan Hamzah Sendut.

Ang, Xin Yee (2022) Effects Of Lactobacillus Spp. Against Vaginal Candidiasis In Pregnant Women. Masters thesis, Perpustakaan Hamzah Sendut.

Ang , Lin Suan (2010) Chemical Characterisation And The Effect Of Alkaline Pulping Of Malaysia Cultivated Kenaf (Hibiscus Cannabinus). Masters thesis, Universiti Sains Malaysia.

Anuar, Fatin Nabila (2020) Reduction Of Oil Adsorption In Banana Fritter Balls: The Effect Of Hydrocolloid Substitution. Project Report. Universiti Sains Malaysia. (Submitted)

Anuar, Mohamad Aiman Mohamad (2020) The Development Of Aerated Dodol Product Using Foam Mat Drying Technology. Project Report. Universiti Sains Malaysia. (Submitted)

Aprilia, Sri (2015) Characterization, Properties And Degradation Of Carbonized Jatropha Seed Shell Filled Vinyl Ester Composites. PhD thesis, Universiti Sains Malaysia.

Ariffin, Fazilah (2016) Structural, flow mechanism and thermal roperties study of oil palm (Elaeis guineensis) trunk syrup. Project Report. Universiti Sains Malaysia. (Submitted)

Ariffin, Nurul Anis Jasmin (2021) Optimization Of Pre-Treatment Conditions Of Acid Blanching And Pectinase In Production Of Papaya Juice. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ashikin, Nurin Syahindah Syasya Nor (2018) Oil Palm Empty Fruit Bunch-Seaweed Biocomposite As Potential Soil Erosion Mitigation For Oil Palm Plantation. Masters thesis, Universiti Sains Malaysia.

Asim, M. and Abdan, Khalina and Jawaid, M. and Nasir, M. and Dashtizadeh, Zahra and Ishak, M. R. and Enamul Hoque, M. (2015) A Review on Pineapple Leaves Fibre and Its Composites. International Journal of Polymer Science, 2015 (950567). pp. 1-16. ISSN 1687-9422

Asis, Ahmad Jaril (2017) Palm Oil Mill Effluent Tertiary Treatment Using Ferrous Sulphate. PhD thesis, Universiti Sains Malaysia.

Asrul Hadi, Nurul Sofea (2021) A Preliminary Study: Protein Extraction Of Migratory Locust (Locusta Migratoria) Via Alkaline Isoelectric Precipitation Method. Project Report. Universiti Sains Malaysia. (Submitted)

Awalludin, Mohd Fahmi (2016) Preparation And Optimization Of Liquefied Oil Palm Trunk Based Adhesive For Particleboard Application. PhD thesis, Universiti Sains Malaysia.

Awam, Pusat pengajian Kejuruteraan (2019) Second Semester Examination 2018/2019 Academic Session June 2019 EAA484 – Building Construction and Technology (Teknologi Pembinaan dan Bangunan) Duration: 2 hours (Masa: 2 jam). [Teaching Resource] (Submitted)

Awang, Huda (2018) Feasibility Of Manganese Sequestration By Genetically Modified Escherichia coli K-12. Masters thesis, Universiti Sains Malaysia.

Ayob, Nor Amira Izzati (2021) Properties Of Poly (Lactic Acid) / Polybutylene Adipate Terephthalate Reinforced With Oil Palm Empty Fruit Bunch Composites For Fused Deposition Modeling 3d Printing. Masters thesis, Universiti Sains Malaysia..

Azahari, Baharin (2012) Reinforcement of natural rubber latex films by Banana flour. Technical Report. Universiti Sains Malaysia.

Azahari, Nur Amiera Kamilia (2020) The Challenges In The Development Of Bread Using Modified Cassava Flour (Mocaf) With Addition Of Roselle Calyces Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Azahari, Nur Amiera Kamilia (2020) The Challenges In The Development Of Bread Using Modified Cassava Flour (Mocaf) With Addition Of Roselle Calyces Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Azimi, Nurazlina (2011) Kesan Penggantian Separa Tepung Gandum Dengan Tepung Sukun (Artocarpus Communis) Ke Atas Sifat Fizikokimia Roti. Masters thesis, Universiti Sains Malaysia.

Aziz, Mu’azah Md (2022) Meneroka Interaksi Pelajar Terhadap Hafalan Al-qur'an Menggunakan Aplikasi Mudah Alih Berasaskan Teknik Loci, Pengulangan Jarak, Dan Pengetulan Kandungan. PhD thesis, Universiti Sains Malaysia.

Aziz, Shalihatun Azlin and Mat Isa, Nor Ashidi and Ngah, Umi Kalthum and Ibrahim, Haidi and Aziz, Mohd Ezane (2007) A Pc-Based Freehand Three-Dimensional Ultrasound. In: Proceedings Of The Third IASTED International Conference On Advances In Computer Science And Technology , 2-4 April 2007, Phuket, Thailand .

Azlim, Nurnabila Afiqah (2020) Development Of Ph-Sensitive Gelatin-Based Intelligent Film Incorporating Dragon Fruit Skin Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Azman, Amzar (2011) Synthesis And Characterization Of Fire Retardant Paper Via Phosphorylation. Masters thesis, Universiti Sains Malaysia.

Azman, Noor Amira Syamimi Noor (2020) Effect Of Wax-Based Oleogel As Novel Frying Medium On Oxidative Stability And Anthocyanin Retention Of Purple Sweet Potato Chips. Project Report. Universiti Sains Malaysia. (Submitted)

Azman, Nur Thaherah Mior (2020) Physicochemical Properties And Enzyme Activity Of Polyphenol Oxidase And Peroxidase From Fresh Pomelo (Citrus Maxima) Juice. Project Report. Universiti Sains Malaysia. (Submitted)

Azuar, Siti Azahani (2016) Palm Oil Mills Effluent Treatment Through Vermifiltration Employing Eudrilus Eugeniae. Masters thesis, Universiti Sains Malaysia.

B

Badri, Nur Alisa Abdul Mutalib @ Ahmad (2020) Comparison Of Autoclave And Vacuum Oven Treatment On Rice Bran Stability And Chemical Properties. Project Report. Universiti Sains Malaysia. (Submitted)

Baghwetah, Ahmed Mohammed Ahmed (2009) Effect Of Different Dietary Lipid Sources On Growth, Tissue Fatty Acid Composition And Muscles Quality Of African Catfish (Clarias Gariepinus). Masters thesis, Universiti Sains Malaysia.

Baharuddin, Nur Shuhada (2020) Lactic Acid Production From Broken Rice Via Fermentation Process. Other. Universiti Sains Malaysia. (Submitted)

Baharudin , Nurul Syuhada (2014) Polychaete Assisted Sand Filter In Treating Synthetic Wastewater. Masters thesis, Universiti Sains Malaysia.

Bahurmiz, Osan Maroof and Ahmad, Rosma and Ismail, Noryati and Adzitey, Frederick and Sulaiman, Shaida Fariza (2016) Antimicrobial Activity of Various Plant Extracts on Pseudomonas Species Associated with Spoilage of Chilled Fish. Turkish Journal of Agriculture: Food Science and Technology, 4 (11). pp. 1017-1023. ISSN 2148-127X

Bakar, Muhammad Khairulnizam Abu (2010) Fish Gelatin From Surimi Processing By-Products: Extraction And Characterization. Masters thesis, Universiti Sains Malaysia.

Bakar, Azizah Abu (2018) Preparation And Characterization Of Polyurethane Composites Reinforced By Kenaf Core. PhD thesis, Universiti Sains Malaysia.

Bakar, Nur Aisyah Munirah Abu (2020) Effect Of Ozone Washing On Physicochemical Properties And Gel Strength Of Surimi Made From African Catfish (Clarias Gariepinus). Project Report. Universiti Sains Malaysia. (Submitted)

Bakar, Padilah (2018) Determination Of Biogenic Amines In Fish Based Products Using Liquid Chromatographic And Capillary Electrophoresis. Masters thesis, Universiti Sains Malaysia.

Barzideh, Zoha and Abd Latiff, Aishah and Gan, Chee Yuen and Abedin, Md. Zainul and Alias, Abd Karim (2014) ACE Inhibitory and Antioxidant Activities of Collagen Hydrolysates from the Ribbon Jellyfi sh (Chrysaora sp.). Food Technology and Biotechnology, 52 (4). pp. 495-504. ISSN 1330-9862

Baskaran, Mohana (2016) The Effect Of Addition Of Polylactic Acid On The Properties Of Oil Palm Trunk Particleboard And Its Potential As A Phantom Material. PhD thesis, Universiti Sains Malaysia.

Baskaran, Mohana (2011) Properties Of Particleboards Made From Oil Palm Trunk With Addition Of Poly-3-Hydroxybutyrate. Masters thesis, Universiti Sains Malaysia.

Behrouz, Amir Talebi (2016) Nickel Ion Extraction Using Liquid-Liquid Extraction And Supported Liquid Membrane. PhD thesis, Universiti Sains Malaysia.

Bhupinder Kaur, Bhupinder Kaur (2008) Development And Physico-Chemical Characterization Of Granular Cold Water-Soluble Sago (Metroxylon Sagu Rottb.) Starch. PhD thesis, Universiti Sains Malaysia.

Boey, Jet Yin (2023) Biological Treatment Of Spent Coffee Ground (Scg) And Its Influence On The Mechanical Properties Of Biopolymer Composite. Masters thesis, Universiti Sains Malaysia.

Boey, Peng Lim (1978) Palm oil fractionation and carotene extraction. PhD thesis, Universiti Sains Malaysia.

Boon, Jia Geng (2014) The Characterization Of Some Physical And Mechanical Properties Of Medium Density Particleboard Made From Oil Palm Trunk Without Formaldehyde Based Adhesives. PhD thesis, Universiti Sains Malaysia.

Boon , Jia Geng (2009) Investigation Of Antifungal Activity Of Difference Parts Of Cerbera Odollam And Effect Of Extracts On Some Properties Of Particleboards. Masters thesis, Universiti Sains Malaysia.

Bujang, Aisah (2007) Effect Of Counter-Rotating Twin Screw Extruder On The Physicochemical And Functional Properties Of Sago (Metroxylon Sagu) Starch. PhD thesis, Perpustakaan Hamzah Sendut.

Bukhari, Noriha (1998) Kesan pengolahan ,kalsium terhadap kualiti buah betik tempatan. Masters thesis, Universiti Sains Malaysia.

C

C, K Chang and Ab Ghani, A and Zakaria, Nor Azazi and Yusof, M F and Ayub, K R and S, H Lai and Hasan, A M M and A, Ainan (2008) Rehabilitation Of Ex-Mining Pond And Existing Wetland For Integrated Stormwater Management. In: 11th International Conference on Urban Drainage, Edinburgh, 2008, Scotland.

C., C. SEOW (1995) Modified atmosphere packaging of a traditional Malaysian nyonya cake: A preliminary study. In: Advanced In Food Research Seminar IV, 21-22 Nov 1995, Universiti Pertanian Malaysia Serdang Selangor.

C. Arjuman, Navaneethan (2021) An Improved Secure Router Discovery Mechanism To Prevent Fake Ra Attack In Link Local Ipv6 Network. PhD thesis, Perpustakaan Hamzah Sendut.

CETREE, Pusat Pendidikan dan Latihan Tenaga Boleh Baharu, Kecekapan Tenaga dan Teknologi Hijau (2016) “Towards Greener” Politeknik Seberang Perai, Pulau Pinang 2016. Berita@Cetree.

CHEONG, MUN WAI (2009) Supplementation Of Nitrogen Sources And Growth Factors In Pineapple Waste Extract Medium For Optimum Yeast (Candida Utilis) Biomass Production [T1-995]. Masters thesis, Universiti Sains Malaysia.

Ch'ng, Weng Kee (2011) Quality Attributes Of Bread Using Mango (Mangifera Indica) Peel Flour. Masters thesis, Universiti Sains Malaysia.

Chan, Hui Tin (2014) Effect Of Ozone Treatment On The Physicochemical Properties Of Corn, Sago And Tapioca Starches. Masters thesis, Universiti Sains Malaysia.

Chang, Siu Hua (2011) Simultaneous Extraction And Stripping Of Cu(II) Ions Through Vegetable Oil-Based Bulk Liquid Membrane. PhD thesis, Universiti Sains Malaysia.

Chapakiya, Habilla (2012) Effect Of Selected Non-Starch Polysaccharides And Bulk Sweeteners On The Properties Of Acid-Thinned Starch Jelly Candy. Masters thesis, Universiti Sains Malaysia.

Charles, Ng Wai Chun (2022) Integration Of Sodium Alginate With Bacillus Subtilis As Microbial Composite For Fertilizer Coating Towards Green Agriculture. PhD thesis, Universiti Sains Malaysia.

Chauhan, Husn Ara (2022) Preparation And Characterization Of Graphene Oxide - Zinc Oxide Nanocomposite In Degradation Of Phenanthrene From Aqueous Solutions. Masters thesis, Perpustakaan Hamzah Sendut.

Che Azmi, Norhaida (2008) Rtes-30usm : Pengklonan Menerusi Perhimpunan, Ekspresi Dan Penilaian Penggunaannya Dalam Ujian IgG4-Elisa Bagi Mengesan Jangkitan Toksokara. Masters thesis, Universiti Sains Malaysia.

Che Ibrahim, Ahmad Kamarulnajuib (2007) Kinetic Parameter Studies Of Activated Sludge Process For Anaerobic Pre-Treated Palm Oil Mill Effluent. PhD thesis, Perpustakaan Hamzah Sendut.

Che Ismail, Che Mohamad Hazwan (2022) Characterization Of Hydrophobic Seaweed Film Reinforced With Kenaf Bast Cellulose Nanofibers. PhD thesis, Perpustakaan Hamzah Sendut.

Che Ismail, Che Mohamad Hazwan (2017) Oil Palm Empty Fruit Bunch Pulp Filled Polypropylene Composites Using Handsheet Making Concept. Masters thesis, Universiti Sains Malaysia.

Che Ku Alam, Che Ku Abdullah (2010) Impregnation Of Oil Palm Trunk Lumber (optl) Using Therm.oset Resins For Structural Applications. Masters thesis, USM.

Chen, Chwen Jen (2005) The Design, Development And Evaluation Of A Virtual Reality (Vr)-Based Learning Environment: Its Efficacy In Novice Car Driver Instruction. PhD thesis, Perpustakaan Hamzah Sendut.

Chen, Sin Min (2017) Comparative Study Of Graphic Arts In Print For Political Propaganda Between Malaysia And China. Masters thesis, Universiti Sains Malaysia.

Chew , Shio Heong (2011) Development And Quality Assessment Of Fermented Pegaga (Centella Asiatica) Tea. Masters thesis, Universiti Sains Malaysia.

Chin, Wen Yi (2020) Development Of Fermented Water Kefir Amaranth Drink. Project Report. Universiti Sains Malaysia. (Submitted)

Chin Peng, Lim (2020) Effect Of A Lactobacilli Probiotic On Longevity And Mobility Of Male Drosophila Melanogaster With Alzheimer’s Disease. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Chok, Wen Xin (2020) Extraction And Identification Of Elastase Inhibitory Peptides From Digested Ovalbumin As Skin Anti-Aging Therapeutics Agent. Other. Universiti Sains Malaysia. (Submitted)

Chong, Li Choo (2011) Effects Of Pre-Treatments On The Physicochemical And Functional Properties Of Musa Acuminata X Balbisiana Cv. Awak Flour. PhD thesis, Universiti Sains Malaysia.

Chong, Yin Hui (2017) Effect Of Pre-Treatment On The Bleachability Of Tropical Mixed Hardwood Kraft Pulps Towards Oxygen And Modified Oxygen Delignification. PhD thesis, Universiti Sains Malaysia.

Chou, Kian Weng (2011) Effect Of The Organic Loading Rate On The Performance Of Mesophilic And Thermophilic Anaerobic Digestion Of Palm Oil Mill Effluent. Masters thesis, Universiti Sains Malaysia.

Chou, Kian Weng (2018) Energy Recovery And Carbon Dioxide Emission Perspectives Of Anaerobic Digestion Of Palm Oil Mill Effluent. PhD thesis, Universiti Sains Malaysia.

Chuah, Li Oon (2016) Ecology, Diversity, Antibiotic Resistance Of Lactic Acid Bacteria (LAB) Isolated From Plant Sources And Their Role In Natural Fermentation Of Tempoyak. PhD thesis, Universiti Sains Malaysia.

Chuen Yeong, Kah (2020) Determination Of The Effect Of Ph On Microalagal Growth And Protein Content In Locally Isolated Tetraselmis Suecica And Scenedesmus Parvus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Chye, Su Jin (2013) Development And Quality Evaluation Of Malaysian Jackfruit 'Dadih' Using Cow's Milk And Goat's Milk. Masters thesis, Universiti Sains Malaysia.

D

David, Bala Jeremiah (2016) Aerobic Treatment And Biodegradation Of Palm Oil Mill Effluent By Indigenous Microorganisms. PhD thesis, Universiti Sains Malaysia.

David Pandya Kumar, Jeya Amantha (2016) Effects Of Multimedia Induced Emotions On Achievement Intrinsic Motivation And Satisfaction Among Polytechnic Students With Different Levels Of Emotional Intelligence. PhD thesis, Perpustakaan Hamzah Sendut.

Devi Vadiveloo, Sajetra (2020) Effects Of Camptothecin On Pichia Pastoris Strain Smd1168h Expressing Dna Topoisomerase I On Agar Plates. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Dewi, Ratna Sari (2015) Kesan Kepekatan Natrium Klorida, Kaedah Pengeringan Dan Penyimpanan Ke Atas Kualiti Dendeng Ikan Yu (Chiloscyllium sp). Masters thesis, Universiti Sains Malaysia.

Din, Muhammad Alif Faiz Mohd (2020) Extraction Of Secondary Metabolite In Tetraselmis Suecica Using Different Solvent Polarity. Other. Universiti Sains Malaysia. (Submitted)

Dinesh Weerasooriya, Poonanulkarage Ruwan (2022) Characterization Of Regenerated Cellulose Films From Oil Palm Empty Fruit Bunch Incorporated With Bifeo3 As A Potential Photocatalyst. PhD thesis, Perpustakaan Hamzah Sendut.

E

Eka Hamonangan , Dongoran (2011) The Effect Of Physical Treatment And Fermentation On Chemical And Nutritional Composition Of Malaysian Rubber Seed. Masters thesis, Universiti Sains Malaysia.

Eldenfria, Atef Hamza (2018) The Effects Of Continuous Adaptation Of Online Contents Based On The Aptitude Profile On Learners’ Engagement. PhD thesis, Universiti Sains Malaysia.

Eng, Hui Yi (2023) The Effect Of Rice Bran Oil And Its Oil Fraction As Shortening Substitute In Bread Production. Masters thesis, Universiti Sains Malaysia.

Eng, Kean Tiek (2012) Effects Of Pretreatment And Enzymatic Hydrolysis On Oil Palm Frond For Use As Yeast Cultivation Medium. Masters thesis, Universiti Sains Malaysia.

Eng Keng, Seow (2019) Textual Properties Of Glutinous Rice Flour Gels And Dodol As Influenced By High Diastase Honey. PhD thesis, Universiti Sains Malaysia.

Ezzreen Zafhrina Mohamad Redza, Nur (2020) Fermentation And Purification Of Lipase By Burkholderia Metallica Using Column Reactor. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

F

Falza, M.A. and Kumar, R.N. and Rozman, H.D. (2003) Ultraviolet Radiation Cured Bio-Fibre Composites From Oil Palm Empty Fruit Bunch. In: Proceedings Of The Advanced Technology Congress 2003, 20-21 May 2003 , Kuala Lumpur Malaysia.

Farizatul Husna Mohd Noor, Nur (2020) Analysis Of Palm Oil Waste After Pretreatment Using Environmental Recycling System (Ers) For The Potential Application As Animal Feed. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Fatah, Ireana Yusra A. and Khalil, H. P. S. Abdul and Hossain, Md. Sohrab and Aziz, Astimar A. and Davoudpour, Yalda and Dungani, Rudi and Bhat, Amir (2014) Exploration of a Chemo-Mechanical Technique for the Isolation of Nanofibrillated Cellulosic Fiber from Oil Palm Empty Fruit Bunch as a Reinforcing Agent in Composites Materials. Polymers, 6 (10). pp. 2611-2624. ISSN 2073-4360

Fatah, Ireana Yusra Abdul (2010) Cell Wall Architecture, Properties And Characteristics Of Bamboo, Kenaf AndRice Straw Fibers. Masters thesis, Universiti Sains Malaysia.

Fauzi, Fauzi (2015) Acetone Soluble Cellulose Acetate From Oil Palm Empty Fruit Bunches (Opefb) Via A One Step Heterogeneous Process For Membrane Applications. PhD thesis, Universiti Sains Malaysia.

Feili, Reza (2014) Utilization Of Jackfruit (Artocarpus Heterophyllus Lam.) Rind Powder As Value Added Ingredient In Bread. Masters thesis, Universiti Sains Malaysia.

Foo, Wan Teck (2013) Textural And Rheological Properties Of Gelatin Or Gellan In Maize Starch – Egg White Composite Gels. PhD thesis, Universiti Sains Malaysia.

G

Gallage, Tharindu Danaja Peiris (2011) Effect on processing method on composition,antinutrients,and physicochemical propertiesof palm kernel cake. Masters thesis, Universiti Sains Malaysia.

Ghaben, Ayman Ibrahim Ali (2023) Statistical-Based Mechanism For Detecting Hyper Text Transfer Protocol Ddos Attacks. PhD thesis, Universiti Sains Malaysia.

Ghalib, Raza Murad and C. S., Chidan Kumar and Hashim, Rokiah and Sulaiman, Othman and Fun, Hoong Kun (2015) Crystal structure of 2-(1,3-dioxoindan-2-yl)isoquinoline-1,3,4-trione. Acta Crystallographica Section E: Crystallographic Communications, 71. 06-07. ISSN 2056-9890

Ghani, Rahimi Ab. (1984) Penempatan Peneroka Di Rancangan Kemajuan Tanah Beris Lalang, Bachok Suatu Penilaian Sosio – Ekonomi Para Peneroka. Project Report. Universiti Sains Malaysia. (Submitted)

Gideon, Olaiya Niyi (2022) Properties And Characterisation Of Bamboo Cellulose Nanofibre Reinforced Polylactic Acid – Chitosan Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Golkhatmi, Azam Majooni (2021) The Design And Evaluation Of Information Visualization For Scholarly Databases In Reducing Cognitive Overload And Improving Comprehension. PhD thesis, Universiti Sains Malaysia.

Govindasamy, Malliga K. (2011) The Effects Of Embodied Pedagogical Agent Integrated With Students' Commonly Asked Questions In The Learning Of Science Among Low Achievers. PhD thesis, Universiti Sains Malaysia.

H

H Simatupang, Maruli Importance of teakwood extractives on wood properties and for tree breeding. In: 3rd Conference On Forestry And Forest Products Research 1995.(CFFPR-95), 3-4 October 1995..

H Simatupang, Maruli (1995) Importance of teakwood extractives on wood properties and for tree breeding. In: 3rd Conference On Forestry And Forest Product Research 1995 (CFFPR), 3-4 October 1995., Kuala Lumpur.

H Simatupang, Maruli Location of caoutchouc in teak. In: 3rd Conference On Forestry And Forest Product Research 1995 (CFFPR), 3-4 October 1995., Kuala Lumpur.

H Simatupang, Maruli Microcrystalline cellulose (MCC) dari batang kelapa sawit dengan menggunakan ledakan stim.(Steam Explosion). In: Simposium Nasional Polimer 95, Pameran Polimer., 11 - 12 Julai 1995, Jakarta, Indonesia.

H. Simatupang, Maruli (1994) Chemical composition of oil palm extractives. In: 3rd Tropical Pulp And Paper Conference , 5-7 December 1994, Regent Hotel Kuala Lumpur.

H. Simatupang, Maruli Chemical composition of oil palm extractives. Technical Report. Universiti Sains Malaysia. (Submitted)

H. Simatupang, Maruli Investigations on the influence of the addition of carbon dioxide on the production and properties of rapidly set wood-cement composites. Cement & Concrete Composites.

Hafiz, Nidaullah and Nadarajan, Abirami and Ahamed Kamal, Shamila Syuhada and Chuah, Li Oon and Huda, Nurul and Tan, Teik Pei and Zainal Abidin, Farah Wahida and Rusul, Gulam (2017) Prevalence of Salmonella in poultry processing environments in wet markets in Penang and Perlis, Malaysia. Veterinary World, 10 (3). pp. 286-292. ISSN 0972-8988

Halim, Noor Haliza Abdul (2010) Characterization Of Physico-Chemical And Film Properties Of Hemicelluloses B From Oil Palm Frond (Elaeis Guineensis). Masters thesis, Universiti Sains Malaysia.

Hamdi, Shaymaa Mundher Ahmed (2011) Reduction Of Heavy Metals Sludge By Vermicomposting Technique. Masters thesis, Universiti Sains Malaysia.

Hamzah, Rosniza (2007) Sintesis Dan Pencirian Kimia Nanokomposit Getah Asli Terepoksida [ENR-50] Dengan Terbitan Silseskuizin: 1,3,5,7,9,11,14-Heptasiklopentil Trisiklo[7.3.3.1 5,11]- Heptasiloksana-Endo-3,7,14-Triol Dan 1,3,5,7-Tetraetilbisiklo[3. 3.1]-Tetrasiloksana-Ekso-3,7 –Diol [T174.7. R822 2007 f rb]. Masters thesis, Universiti Sains Malaysia.

Hamzah, Tuan Muhamad Hassan Tuan (2018) Isolation Of Microcrystalline Cellulose From Oil Palm Empty Fruit Bunch Bleached Pulp: Statistical Optimization Of Acid Hydrolysis And Characterization. Masters thesis, Universiti Sains Malaysia.

Hanapi, Hazimah (2020) Preparation And Characterization Of Ph-Sensitive Fish Gelatin Film Containing Anthocyanins Extracted From Rambutan Peel. Project Report. Universiti Sains Malaysia. (Submitted)

Hanif, Md. Abu (2006) Physico-Chemical Changes Of Gluten Matrix As A Result Of Maillard Reaction With Glucose. Masters thesis, Universiti Sains Malaysia.

Hao, Moo Keng (2023) Identifying The Components And Factors Of Graduate’s Employability: The Perspectives Of Policymakers, University Administrators, Undergraduates And Employers In Penang. Masters thesis, Universiti Sains Malaysia.

Hasan, Nik Nur Hidayah Nik (2020) Physicochemical Properties And Antioxidant Activity Of Green Grass Jelly Containing Sago Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Hasbullah, Iznan Husainy (2023) Enhanced Trust-nd Protocol To Prevent Temporal Denial-of-service Vulnerabilities On Ipv6 Link-local Network. Masters thesis, Universiti Sains Malaysia.

Hasbullah, Nur Ili (2021) The Physicochemical Properties And Effect Of Storage Period On Powder Properties Of Instant ‘Masak Lodeh’. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Hashim, Mohammad Fizree (2012) Characterization Of Nano-Structured Oil Palm Ash And Its Influence As Filler In Epoxy Composites. Masters thesis, Universiti Sains Malaysia.

Hashim, Rokiah Properties and characterization of bio-adhesive based wood composite. Project Report. Universiti Sains Malaysia. (Submitted)

Hassan, Luma Khairy (2018) Characterization Of Rambutan (Nephelium lappaceum L.) Seed Fat And Its Mixture With Cocoa Butter For Potential Application In Dark Chocolate. PhD thesis, Universiti Sains Malaysia.

Hassan, Nur Hassanah Mohd (2023) Optimizing The Production Of Short-Peptide Tagged Ss3A Recombinant Protein As A Potential Serological Biomarker For Strongyloidiasis. Masters thesis, Perpustakaan Hamzah Sendut.

Herpandi, Herpandi (2014) Physicochemical Properties And Protein Digestibility Of Tuna By-Products Obtained Through Enzymatic Hydrolysis. PhD thesis, Universiti Sains Malaysia.

Hintaw, Ahmed Jameel (2023) Secure Hybrid Scheme For Securing Mqtt Protocol Based On Enhanced Symmetric Algorithm. PhD thesis, Perpustakaan Hamzah Sendut.

Ho, Yeek Chia (2000) Characterization Of Pectin As Biopolymeric Flocculant And Its Effectiveness In The Treatment Of Turbid Waste Water. Masters thesis, Universiti Sains Malaysia.

Hong, Lee Fen and Cheng, Lai Hoong and Chong, Yew Lee and Kok, Khiang Peh (2015) Characterisation of Physicochemical Properties of Propionylated Corn Starch and Its Application as Stabiliser. Food Technology and Biotechnology, 53 (3). pp. 278-285. ISSN 1330-9862

Hormat, Nurhuda (2020) Usage Of Edible Coating To Improve The Quality And Shelf Life Of Tomato (Solanum Lycopersicum). Project Report. Universiti Sains Malaysia. (Submitted)

Hossain, Md. Azmal (2012) Modelling And Forecasting Of Flow Rate, Water Level And Water Quality Of Muda River And Beris Dam At Sungai Muda Catchment, Kedah Darul Aman, Malaysia. PhD thesis, Universiti Sains Malaysia.

Hussin, Farah Salina (2011) Preparation And Characterization Of Xylo-Oligosaccharides From Oil Palm Frond (Elaeis Guineensis). Masters thesis, Universiti Sains Malaysia.

H’ng , Yin Mun (2016) Flow And Turbulence Characteristics Through A Vertical-Axis Wind Turbine Using Eddy Covariance Method. Masters thesis, Universiti Sains Malaysia.

I

Ibrahim, Mahamad Hakimi Synthesis and characterization of polymeric materials and their applications in removal and recovery of heavy metals from industrial wastewater. Project Report. Universiti Sains Malaysia. (Submitted)

Ibrahim, Shamsudin (2008) Transportation Optimization Model Of Palm Oil Products For Northern Peninsular Malaysia. PhD thesis, Universiti Sains Malaysia.

Ibrahim, Shamsudin (2008) Transportation Optimization Model Of Palm Oil Products For Northern Peninsular Malaysia. PhD thesis, Universiti Sains Malaysia.

Ikhlas, Boni (2011) Quality Characteristics Of Quail Meatballs. Masters thesis, Universiti Sains Malaysia.

Ishak, Siti Aisyah (2016) Application Of Banana Stem And Rice Straw Derived Bio-Flocculants For Textile Wastewater Treatment. Masters thesis, Universiti Sains Malaysia.

Islam, Md. Saiful and Hamdan, Sinin and Ahmad, Mansor and Hasan, Mahbub and Hassan, Azman and Mohamad Haafiz, M. K. and Jawaid, M. (2014) Effect of PVA-co-MMA Copolymer on the Physical, Mechanical, and Thermal Properties of Tropical Wood Materials. Advances in Materials Science and Engineering, 2014 (626850). pp. 1-8. ISSN 1687-8434

Ismail, Ishamri (2010) Functional Properties, Changes During Storage And Application Of "Duckrimi" (Surimilike Material From Duck Meat) On Sausage. Masters thesis, Universiti Sains Malaysia.

Ismail, Mohammad Saiful Nidzam (2022) Optimisation Of Palm Oil Degumming Process Towards Refined Bleached Deodorised Palm Oil Safety And Quality. Masters thesis, Perpustakaan Hamzah Sendut.

Ismail, Nor Azlina (2011) Komposit Poliester Tak Tepu Dipenguat Gentian Kenaf Dan Nano Zarah (montmorilonit). Masters thesis, USM.

Ismail, Nor Azlina (2010) Komposit Poliester Tak Tepu Dipenguat Gentian Kenaf Dan Nano Zarah (Montmorilonit). Masters thesis, Universiti Sains Malaysia.

Ismail, Norhuda (2005) Studies On Mass Transfer Characteristics Of Palm Kernel Oil Extraction Using Supercritical Carbon Dioxide. PhD thesis, Perpustakaan Hamzah Sendut.

Ismail, Norli (2016) Two-stage Anaerobic Digestion of Palm Oil Mill Effluent with Aerobic Post-treatment. Technical Report. Universiti Sains Malaysia.

Izatul Anis Muhammad Jais, Nur (2020) Kinetic Model For Growth And Influence Of Ph On The Growth Of Halochlorella Rubescens In A Fabricated Photobioreactor. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

J

Jafarzadehkhosravi, Shimae (2017) Development Of Semolina Film Reinforced With Zinc Oxide And Kaolin Nanoparticles. PhD thesis, Universiti Sains Malaysia.

Jais, Nur Izatul Anis Muhammad (2020) Kinetic Model For Growth And Influence Of pH ON THE Growth Of Halochlorella Rubescens In A Fabricated Photobioreactor. Other. Universiti Sains Malaysia. (Submitted)

Jakera, Shakera (2022) In Vitro And In Vivo Studies Of Chicken Gut To Produce Chicken Probiotics By Isolated Microbes From Local Fermented Foods. Masters thesis, Perpustakaan Hamzah Sendut.

Jalaludin, Nurul Syafira Nabila (2021) Foam Properties Of Bahulu Batter As Influenced By Stabilizers. Other. Universiti Sains Malaysia. (Submitted)

Jamian, Nurul Sufiana (2019) Characterization Of Modern Water Isotopes Of Northeast Monsoon Precipitation In Kelantan. Masters thesis, Universiti Sains Malaysia.

Jawaid, Mohammad (2011) Development and characterization of oil palm empty fruit bunch/jute fibres reinforced epoxy hybrid composites. PhD thesis, Universiti Sains Malaysia.

Joey Lew Hui, Lin (2020) Identification Of Morphology, Growth Kinetic And Secondary Metabolites Synthesized In Green Freshwater Microalgae (Coccomyxa Dispar). Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Jumhuri, Nadiah (2016) Properties Of Particleboard Made From Treated Oil Palm Trunk Particles. Masters thesis, Universiti Sains Malaysia.

K

K. C. , Rasaratnam (1975) A study of some accelerator combinations in the vulcanization of rubber. Masters thesis, Universiti Sains Malaysia.

Kader Ali, Noor N and Soon, Bin Y. and Goh, Lee S. and Ahmad Razi, Nur A. (2015) Symptoms versus problems (SVP) in household high speed broadband (HSBB): regaining momentum for Unifi, Malaysia. Problems and Perspectives in Management International Research Journal, 13 (2). pp. 330-346. ISSN 1727-7051, 1810-5467 (online)

Kamaludin, Ramizah (2023) Combination Of Aspergillus Niger Fermentation And Broken Rice As Coagulant For Treatment Of Palm Oil Mill Effluents. Masters thesis, Universiti Sains Malaysia.

Kamaruzzaman, Noor Qamarina (2020) Development And Characterization Of Yogurt Like Probiotic Product From Jackfruit (Artocarpus Heterophyllus) Seed Milk. Project Report. Universiti Sains Malaysia. (Submitted)

Kathiri, Ali Mohammed Fael Hubais Al (2023) A Study On Academic Staff’s Perceptions Of Internationalisation Of The Curriculum In University Of Technology And Applied Science, Salalah. PhD thesis, Universiti Sains Malaysia.

Khairul Affendi, Nurul Haziqah (2021) Protein Extraction Of Locust (Locusta Migratoria) Via Acid Method. Other. Universiti Sains Malaysia. (Submitted)

Khalaf Ali, Almanasir Yazan (2021) Application Of Oil Palm Empty Fruit Bunch (Opefb) – Treated Palm Oil Mill Effluent (Pome) Sludge Pellet On Soil Erosion And Its Implication On Simulated Experiment. Masters thesis, Universiti Sains Malaysia.

Khaleel, Ahmed Isam (2017) Factors Affecting Nurses’ Motivation And Confidence For Increased Self-Regulated And Collaborative Learning In Second Life Environment. PhD thesis, Universiti Sains Malaysia.

Khalid, Hirda Lailani (2021) Optimizing Alternative Wind Power For Energy Efficient Building Design In Tropical Bot-Humid Climate Of Malaysia. Masters thesis, Universiti Sains Malaysia.

Khan, M. F. and Latif, M. T. and Saw, W. H. and Amil, N. and Nadzir, M. S. M. and Sahani, M. and Tahir, N. M. and Chung, J. X. (2016) Fine particulate matter in the tropical environment: monsoonal effects, source apportionment, and health risk assessment. Atmospheric Chemistry and Physics, 16 (2). pp. 597-617. ISSN 1680-7316

Khan, Mohammod Sazid Zaman (2012) Providing Ubiquitous Positioning Using Context Aware Handover Algorithm. Masters thesis, Universiti Sains Malaysia.

Khir, Mohammad Aliff Shakir Mohamad Jamil (2018) Factors Affecting Water Absorption Of Hydrophilic Polymeric Membrane Based On Crosslinked Empty Fruit Bunch And Polyvinyl Alcohol. Masters thesis, Universiti Sains Malaysia.

Khoo, Zenyang (2020) Investigation Of Different Harvesting Methods For Microalgae Coccomyxa Sp. Biomass. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Khosravihaftkhany, Shabnam (2015) Ultrasound-Assisted Biosorption Process For The Removal Of Lead And Iron On Landfill Leachate Using Pretreated Oil Palm Biomass. PhD thesis, Universiti Sains Malaysia.

Koay , Ee Ling (2011) The Effect Of Chemically Modified Lignin As A Filler In Ultraviolet Curable Resin System. Masters thesis, Universiti Sains Malaysia.

Kok, Boon Hui (2020) Production Of Novel Recombinant Anti-PFHRP2 VNAR-G1 Protein Using Escherichia COLI BL21(DE3) Expression System. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Kok, Boon Hui (2020) Production Of Novel Recombinant Antipfhrp2 Vnar-G1 Protein Using Escherichia Coli Bl21(De3) Expression System. Other. Universiti Sains Malaysia. (Submitted)

Kolhar, Manjur Sayyad Badasha (2010) Real Time Conference Gateway For Heterogeneous Clients : Real Time Switching Clients And Inter-Asterisk Exchange Clients. PhD thesis, Universiti Sains Malaysia.

Kong, Suh Chin (2004) Force-Guided Robot In Mobile Phone Assembly [TK6570.M6 K82 2004 ff rbrb Kejuruteraan] [Microfiche 7706]. Masters thesis, Universiti Sains Malaysia.

Kuan, Yau Hoong (2017) Duck Feet Gelatin – Characterization And The Effects Of Sugars And Salts On Its Gelation, Foaming And Emulsifying Properties. PhD thesis, Universiti Sains Malaysia.

Kwek, Teik Huat (2000) Kajian Kualiti Air Di Kawsan Lembaga Kemajuan Pertanian Muda (Mada). Project Report. Universiti Sains Malaysia. (Submitted)

L

Laghari, Shams Ul Arfeen (2023) Cryptographic Authentication-Based Mechanism For Securing Secs/Gem Communications For Industry 4.0 Manufacturing. PhD thesis, Universiti Sains Malaysia.

Lam, Xue Mei (2020) Preparation And Characterization Of Intelligent Packaging Based On Torch Ginger Extract And Sago Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Lam, Xue Yuan (2020) Stability Of Wax-Based Oleogel As Novel Frying Medium Of Par-Fried French Fries. Project Report. Universiti Sains Malaysia. (Submitted)

Lamaming, Junidah (2012) The Effect Of Additives On The Properties Of Oil Palm Trunk Binderless Particleboard. Masters thesis, Universiti Sains Malaysia.

Lamaming, Junidah (2016) Isolation And Characterization Of Cellulose Nanocrystals From Oil Palm Trunk. PhD thesis, Universiti Sains Malaysia.

Lamaming, Sofie Zarina (2023) Properties Of Soy Protein Isolate-chitosan Bioadhesives For Production Of Oil Palm Trunk Particleboard. Masters thesis, Universiti Sains Malaysia.

Lau, Amy Sie Yik (2018) A Randomized, Double Blind, Placebo-Controlled Study On The Efficacy Of Bifidobacterium Longum BB536 In Reducing Symptoms Of Respiratory And Gastrointestinal Diseases Among Young Children. Masters thesis, Universiti Sains Malaysia.

Lau, Yen Yie (2015) Study Of Bi-Functionalized Laterite Soil In Treating Dye Wastewater Through Coagulation-Flocculation And Degradation. Masters thesis, Perpustakaan Hamzah Sendut.

Leau, Yu Beng (2016) A situation assessment and prediction mechanism for network security situation awareness. PhD thesis, Universiti Sains Malaysia.

Lee, Chih Fang (2014) Investigation On Nasal Airflow Of Malaysian Females Using Cfd. PhD thesis, Universiti Sains Malaysia.

Lee, Keat Teong (2009) A Comparative Study On The Energy Policies In Japan And Malaysia In Fulfilling Their Nations Obligations Towards The Kyoto Protocol. Working Paper. Universiti Sains Malaysia. (Unpublished)

Lee, Khai Ern (2012) Preparation, Characterization And Application Of Magnesium Salt-Polyacrylamide Hybrid Materials In Dye Wastewater Treatment. PhD thesis, Perpustakaan Hamzah Sendut.

Lee, Lai Yee (2021) Development Of Selective Extraction For Cd(II), Cu(II) And Ni(II) Ions Using Dual Flat Sheet Supported Liquid Membrane System. PhD thesis, Perpustakaan Hamzah Sendut.

Lee, Zi Xin (2020) Influence Of Nitrogen Sources On Growth Profile And Their Kinetic Studies In Newly Isolated Acidophilic Microalgae, Coccomyxa Dispar And Scenedesmus Parvus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Lee, Zi Xin (2020) Influence Of Nitrogen Sources On Growth Profile And Their Kinetic Studies In Newly Isolated Acidophilic Microalgae, Coccomyxa Dispar And Scenedesmus Parvus. Other. Universiti Sains Malaysia. (Submitted)

Leh , Cheu Peng (2016) Production of second generation bioethanol-effect of various pre-treatments on non-wood biomass towards sugar production. Technical Report. Universiti Sains Malaysia.

Leong, Kah Yan (2020) Physical Extraction Of Flagella Via Ultrasonication From Bacillus Subtilis 168 With Various Control Elements. Other. Universiti Sains Malaysia. (Submitted)

Leong, Yin Hui (2011) Risk Assessment Of Aflatoxins In Nuts And Nut Products Amongst Adult Population In The State Of Pulau Pinang. PhD thesis, Universiti Sains Malaysia.

Leow, Kim Teck (2020) Polysaccharides-Rich Extract From Fruiting Body Of Mushroom (Pleurotus Pulmonarius) As A Potential Source Of Prebiotic. PhD thesis, Universiti Sains Malaysia..

Leow, Kim Teck (2020) Polysaccharides-Rich Extract From Fruiting Body Of Mushroom (Pleurotus Pulmonarius) As A Potential Source Of Prebiotic. PhD thesis, Universiti Sains Malaysia.

Liew, Wen Chian (2020) Microbial Production Of Polyhydroxybutyrate (Phb) By Burkholderia Cepacia BPT1213 From Different Carbon Sources And Its Fermentation Kinetics. Other. Universiti Sains Malaysia. (Submitted)

Lim, Chin Peng (2020) Effect Of A Lactobacilli Probiotic On Longevity And Mobility Of Male Drosophila Melanogaster With Alzheimer’s Disease. Other. Universiti Sains Malaysia. (Submitted)

Lim, Hui Ting (2020) Effects Of A Lactobacilli Probiotic On Survival And Mobility Of Female Drosophila Melanogaster With Alzheimer’s Disease. Other. Universiti Sains Malaysia. (Submitted)

Lim, Jia Her (2020) Isolation, Prevalence And Antibiotic Resistance Of Salmonella Spp. In Fish Obtained From Wet Markets In Penang, Malaysia. Project Report. Universiti Sains Malaysia. (Submitted)

Lim, Siew Guan (2020) Physicochemical And Functional Properties Of Mango Seed Dietary Fiber Extract (Msdfe), Papaya Seed Dietary Fiber Extract (Psdfe) And Honeydew Seed Dietary Fiber Extract (Hsdfe). Project Report. Universiti Sains Malaysia. (Submitted)

Lim, Siew Khim (2021) Enzymatic Hydrolysis Of Soy Okara And Fermentation Using Lactobacillus Sp. To Improve Its Nutritional And Functional Benefits As Functional Food Ingredient. Masters thesis, Universiti Sains Malaysia.

Lim, Yee Ling (2017) Removal Of 17a- Ethynylestradiol (EE2) In Aqueous Solution Using Adsorption Onto Palm Kernel Shell (PKS) And Algal Bioremediation. PhD thesis, Universiti Sains Malaysia.

Lim, Chooi Ling (2009) Treatment of a reactive dye, a disperse dye, and their mixtures using h2o2/pyridine/cu (II) system [T1-995]. Masters thesis, Universiti Sains Malaysia.

Liong , Min Tze (2016) Development of bioactive films from lactic acid bacteria for dermal diseases. Technical Report. Universiti Sains Malaysia.

Liong , Min Tze (2013) Understanding the mechanisms of dermal inhibitive and bioactive compounds from lactobacilli and bifidobacteria. Project Report. Universiti Sains Malaysia.

Loi, Hsean Ren (2023) Enhanced Production Of Nitrate Reductase By Lactic Acid Bacteria For The Synthesize Of Silver Nanoparticles. Masters thesis, Universiti Sains Malaysia.

Loo, Chee Yeong (2009) Penyaringan dan pengoptimuman penghasilan protein intrasel yis dalam medium sisa pertanian untuk industri makanan. Masters thesis, Universiti Sains Malaysia.

Looi, Chee Meng (2000) Sifat-Sifat Higroterma Dan Rekahan Komposit Poliamida 6 Diperkuatkan Gentian Kaca Pendek. Masters thesis, Universiti Sains Malaysia.

Low, Yan Kitt (2020) The Effects Of Acid Dipping And In-Pack Pasteurization On The Safety And Quality Of Fresh Rice Noodles. Masters thesis, Universiti Sains Malaysia.

Low , Ling Wei (2011) Decolorization And COD Reduction Of Methylene Blue Dye Wastewater Through Adsorption Using Raw And Modified Bagasse. Masters thesis, Universiti Sains Malaysia.

Lukman, Ismed (2010) Development And Characterization Of Duck Nuggets. Masters thesis, Universiti Sains Malaysia.

M

M.R., Nurul Fazita and Jayaraman, Krishnan and Bhattacharyya, Debes and Hossain, Md. Sohrab and M.K., Mohamad Haafiz and H.P.S., Abdul Khalil (2015) Disposal Options of Bamboo Fabric-Reinforced Poly(Lactic) Acid Composites for Sustainable Packaging: Biodegradability and Recyclability. Polymers, 7 (8). pp. 1476-1496. ISSN 2073-4360

M.R., Nurul Fazita and Krishnan, Jayaraman and Debes, Bhattacharyya and M.K., Mohamad Haafiz and Chaturbhuj K., Saurabh and M. Hazwan, Hussin and H.P.S, Abdul Khalil (2016) Green Composites Made of Bamboo Fabric and Poly (Lactic) Acid for Packaging Applications—A Review. Materials, 9 (6). pp. 1-29. ISSN 1996-1944

MUSA, LUQMAN (2009) Penghasilan Komposit Poliester Tak Tepu Terisi Teras Kenaf Dan Pengisi Nano Melalui Teknik Tekan Panas [T1-995]. PhD thesis, Universiti Sains Malaysia.

Maghazechi, Avan Farouq Qadir (2023) Rheological Characterization And Fouling Mitigation Of Coconut Cream Emulsion. PhD thesis, Universiti Sains Malaysia.

Mahamud, Amalia (2009) Antioxidant And Antifungal Activities Of Some Malaysian Commercial Timbers. Masters thesis, Universiti Sains Malaysia.

Mahamud Pauzi, Farhana (2015) The Effect Of Chemical Treatment On The Pulp And Paper Properties Of Banana (Musa Sp.) Stem And Its Effect On Blending With Secondary Fibers. Masters thesis, Universiti Sains Malaysia.

Mahmoud Al-Emari, Salam Radi (2022) Abnormal Transactions Detection In The Ethereum Network Using Semi-Supervised Generative Adversarial Networks. PhD thesis, Perpustakaan Hamzah Sendut.

Mahmud, Nur Adilla (2020) Enzymatic Hydrolysis And Lactic Acid Bacteria Fermentation Of Okara. Other. Universiti Sains Malaysia. (Submitted)

Maniam, Manivannan Melvin Ravindran (2020) Understanding The B-Cyclodextrin Inclusion Complex Formation And Its Application In Antimicrobial Active Packaging System. Project Report. Universiti Sains Malaysia. (Submitted)

Mansur, Fatin Zafirah (2016) Feasibility Of An Air-To-Air Energy Recovery System For Building In Hot-Humid Environment. Masters thesis, Universiti Sains Malaysia.

Masduki, Mohd Masri (2017) Enhancement Of Hybrid Fibre Reinforced Vinyl Ester Composite Using Nanococonut Shell. Masters thesis, Universiti Sains Malaysia.

Mat Easa, Azhar Development of cosmos caudatus (Ulam Raja)-enriched beef burger. Project Report. Universiti Sains Malaysia. (Submitted)

Mat Salleh, Ummi Shafiqah (2011) Effects Of Ultraviolet Treatment On The Mechanical And Physical Properties Of Edible Starch Blend Films. Masters thesis, Universiti Sains Malaysia.

Md. Nasir, Siti Norfariha (2016) Pretreatment And Iiydrolysis Of Rice Straw And Fruits Peel Waste By Using Vermiwash For Bioethanol Production. Masters thesis, Perpustakaan Hamzah Sendut.

Mekanik, Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018/January 2019 EPP 331 – Manufacturing Technology II [ Teknologi Pembuatan II ] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

Mhd.Ramle, Sitti Fatimah (2009) Study On Antioxidant Activities And Antifungal Properties Of Some Malaysian Timbers From Selected Hardwoods Species. Masters thesis, Universiti Sains Malaysia.

Mirmohammadi, Mirtaghi (2010) Evaluation Of Diisocyanates And Their Metabolites In Selected Iranian Polyurethane Factories. PhD thesis, Universiti Sains Malaysia.

Mirza Mohammad Faizal, Mohammad (2020) Effect Of Different Yeast Extract Concentration In Membrane-less Microbial Fuel Cell (Ml-mfc) For Electricity Generation Using Food Waste As Substrate. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Mistar, Eka Marya (2023) Properties Enhancement Of Propionylated Kenaf Fiber Reinforced Vinyl Ester Composites With The Addition Of Bionanocarbon. PhD thesis, Universiti Sains Malaysia.

Mlambo, Larry Kurai (2023) Evaluation Of Cell-Free Supernatant Of Lactic Acid Bacteria, Lactiplantibacillus Plantarum K014 Against Skin Pathogen Bacteria. Masters thesis, Universiti Sains Malaysia.

Mobin Siddique, Md.Bazlul (2010) Enhancement of the physical and chemical properties of palm oil blends. PhD thesis, Universiti Sains Malaysia.

Mohaideen, Katheem Kiyasudeen Seeni (2018) Eudrilus Eugeniae As A Plug Flow Reactor. PhD thesis, Universiti Sains Malaysia.

Mohamad, Lydia (2021) A Study On The Dual Application Of Black Soldier Fly Larvae (Hermetia Illucens): Protein-Rich Animal Feed And Biological Polyhydroxybutyrate (Phb) Extraction Agent. Masters thesis, Universiti Sains Malaysia.

Mohamad, Maheera (2014) Minimization Of Heavy Metals Migration From Landfill Leachate By Using Admixture Of Laterite Soil And Pressmud. Masters thesis, Perpustakaan Hamzah Sendut.

Mohamad, Rohaslinda (2017) Detection And Identification Of Cyanobacterial Toxin Encoding Gene In Malaysia. Masters thesis, Universiti Sains Malaysia.

Mohamad Amini, Mohd Hazim (2009) Extracts Of Cerbera Odollam For Anti Bacteria Activity And Evaluation On Some Wood Product Properties After Impregnation. Masters thesis, Universiti Sains Malaysia.

Mohamad Kassim, Mohamad Haafiz (2011) Cellulose Phosphate From Oil Palm Biomass As Potential Biomaterial. Masters thesis, USM.

Mohamed, Siti Hajar (2022) Isolation Of Nano-Crystalline Cellulose From Waste Cotton Cloths Using Supercritical Carbon Dioxide Technology As Bio Adsorbent For Cr(Vi) Removal. Masters thesis, Perpustakaan Hamzah Sendut.

Mohammad Faizal, Mohammad Mirza (2020) Effect Of Different Yeast Extract Concentration In Membrane-Less Microbial Fuel Cell (ML-MFC) For Electricity Generation Using Food Waste As Substrate. Other. Universiti Sains Malaysia. (Submitted)

Mohammad Hani Ahmad, Alrosan (2022) Structural Interactions And Fermentation Of Lentil Protein With Other Proteins To Improve The Functional And Nutritional Properties. PhD thesis, Perpustakaan Hamzah Sendut.

Mohd Amin, Siti Faridah (2009) Optimization Of Jackfruit Seed(Artocarpus Heterophyllus LAM.) Flour And Polydextrose Content In The Formulation Of Reduced Calorie Chocolate Cake. Masters thesis, Universiti Sains Malaysia.

Mohd Hani, Norziah (2005) Development of enzymatically-debranched starch products from sago And tapioca starch for use as fat replacer in foods. Project Report. Universiti Sains Malaysia.

Mohd Hani, Norziah Studies on the kinetics of Sol-Gel transition and gelation mechanism of fish gelatin extracted from fish byproducts. Project Report. Universiti Sains Malaysia. (Submitted)

Mohd Johary, Nurnadia (2021) Mechanical Properties Of Bamboo Particle Reinforced Polylactic Acid (Pla) Composite Using Taguchi Method. Masters thesis, Universiti Sains Malaysia.

Mohd Saad, Nurul 'Atiqah (2014) The Effects Of Chemical Modification And Layering On Properties Of Woven And Nonwoven Kenaf Fiber Reinforced Epoxy Composites. Masters thesis, Universiti Sains Malaysia.

Mohd Saad, Nurul `Atiqah (2021) Celulosic Nanofiber Kenaf Bast Using Supercritical Co2 Technique As Reinforcement In Nanocomposite For Premium Packaging Applications. PhD thesis, Universiti Sains Malaysia.

Mohd Zain, Nor Fauziah (2017) Optimization Of Polyhydroxyalkanoate (PHA) Production By Burkholderia Cepacia BPT1213 Using Waste Glycerol As The Sole Carbon Source. Masters thesis, Universiti Sains Malaysia.

Mohd Zukeri, Mohd Ridzuan Hafiz (2015) Morfologi Gentian Dan Sifat Kertas Pemukulan Pulpa Peroksida Beralkali Daripada Tandan Buah Kosong Kelapa Sawit. Masters thesis, Universiti Sains Malaysia.

Mohd-Asharuddin, Syazwani and Othman, Norzila and Mohd Zin, Nur Shaylinda and Tajarudin, Husnul Azan (2017) A Chemical and Morphological Study of Cassava Peel: A Potential Waste as Coagulant Aid. MATEC Web of Conferences, 103 (06012). pp. 1-7. ISSN 2261-236X

Mokhtar, Muhammad Wirawan Mohd (2020) Development Of Extruded Food Snack Using Modified Cassava Flour (Mocaf) With Addition Of Local Herbs. Project Report. Universiti Sains Malaysia. (Submitted)

Mos, Hasimah (2023) Comparison Of Carbon Oxidation Losses From A Bare Drained Peatland Using Different Techniques. Masters thesis, Universiti Sains Malaysia.

Mousavi, Leila (2018) Evaluation Of Antihyperglycemic Effects, Nutritional/Antinutritional Values And Phytochemical Contents Of Ocimum Tenuiflorum Linn. PhD thesis, Universiti Sains Malaysia.

Moyeen, Tahsina (2020) Physicochemical And Antibacterial Characteristics Of Citrus Essential Oil Nanoemulsions. Project Report. Universiti Sains Malaysia. (Submitted)

Muhamad, Siti Shafini (2007) Kesan Penggantian Separa Tepung Gandum, Tepung Biji Nangka (Artocarpus Heterophyllus) Dan Polidekstrosa Ke Atas Ciri-Ciri Kualiti Mufin Kurang Lemak. Masters thesis, Universiti Sains Malaysia.

Muhammad, Syahidah A. and Russell D., Frew and Alan R., Hayman (2015) Compound-specific isotope analysis of diesel fuels in a forensic investigation. Frontiers in Chemistry, 3 (12). pp. 1-10. ISSN 2296-2646

Muhammad Niza, Noorzalila (2022) Treatment Of Stabilized Landfill Leachate Using Batch Electrocoagulation With Vibration-Induced Electrode Plates. PhD thesis, Perpustakaan Hamzah Sendut.

Muhenda, Mary Basaasa (2006) Technological Knowledge Transfer From Foreign Partners To Uganda's International Joint Venture : A Case Of The Manufacturing Industries. PhD thesis, Universiti Sains Malaysia.

Mukhtalifah, Sukhufum Starch Based Antioxidant Active Packaging. Project Report. Universiti Sains Malaysia. (Submitted)

Muniandy, Jayanthi (2022) Factors Influencing Esp Learners’ Behavioural Intention Towards The Use Of Edmodo At A Malaysian Public University. PhD thesis, Perpustakaan Hamzah Sendut.

Munusamy, Sri Raj Rajeswari (2011) Numerical And Experimental Studies On Production Of Fine Silica In An Opposed Fluidized Bed Air Jet Mill. PhD thesis, Universiti Sains Malaysia.

Murad, Marfaiza (2014) Life Cycle Assessment: Case Study In Wafer Fabrication. Masters thesis, Perpustakaan Hamzah Sendut.

Murata, Yoshinori and Danjarean, Hatairat and Fujimoto, Kiyohiko and Kosugi, Akihiko and Arai, Takamitsu and Ibrahim, Wan Asma and Suliman, Othman and Hashim, Rokiah and Mori, Yutaka (2015) Ethanol fermentation by the thermotolerant yeast, Kluyveromyces marxianus TISTR5925, of extracted sap from old oil palm trunk. AIMS Energy, 3 (2). pp. 201-213. ISSN 2333-8326

Mustahil, Noorul Linda Suraya (2012) Chemically Modified Kenaf Bast Fibres Reinforced Polyster Composites. Masters thesis, Universiti Sains Malaysia.

Mustahil, Noorul Linda Suraya (2017) Development Of Unsaturated Polyester Hybrid Composites Filled With Empty Fruit Bunch And Oil Palm Ash. PhD thesis, Universiti Sains Malaysia.

Mustapha, Asniza (2011) Development Of New Organic Wood Paints With Lignin As Additive. Masters thesis, Universiti Sains Malaysia.

Muthu, Vikneswaran (2019) Controlled Release Of Nutrients From Coconut Water-Based Hydrogels. Masters thesis, Universiti Sains Malaysia.

N

N., Zafirah and N. A., Nurin and M. S., Samsurijan and M. H., Zuknik and M., Rafatullah and M. I., Syakir (2017) Sustainable Ecosystem Services Framework for Tropical Catchment Management: A Review. Sustainability, 9 (4). pp. 1-25. ISSN 2071-1050

Nadhari, Wan Noor Aidawati Wan (2011) Study On Properties Of Binderless,Particleboard From Oil Palm (Elaeis Guineensis) Biomass. Masters thesis, Universiti Sains Malaysia.

Nasir , M (1994) Current status of composite activities in Malaysia. In: Composite Materials And Their Application In The Australasian Region., 8-9 december 1994, Composite building LG 204 The University Of Hong Kong.

Nasrollah Vakili, Mohammadtaghi Vakili (2016) Adsorption Of Reactive Dyes By Hexadecylamine And 3-Aminopropyl Triethoxysilane Modified Chitosan Beads. PhD thesis, Universiti Sains Malaysia.

Nasrudin, Nurshatila (2021) Enhancement Of Oat Milk Suspension Stability Via Enzyme Hydrolysis Manipulation. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Navaneethan, Yugenraj (2020) Prevalence, Characterization And Biofilm Formation Of Toxigenic Bacillus Cereus Isolated From Ready-To-Eat Cooked Rice In Penang. Masters thesis, Universiti Sains Malaysia.

Ng, Jing Sheng (2021) Adulteration Detection Of Edible Palm Oil Using Infrared Untargeted Screening And Targeted Fatty Acid Diagnostic Ratio Coupled With Chemometrics. Masters thesis, Universiti Sains Malaysia..

Ng, Soo Huey (2011) Improvement in oxygen delignification of oil palm empty fruit bunches (EFB) soda-aq pulp and use of experimental design for process optimization. Masters thesis, Universiti Sains Malaysia.

Ng, Zhang Jin (2023) Purification, Characterization, And Microemulsion Spray Formulation Of Enterocin Secreted By Enterococcus Faeciumcc2 Against Oral Pathogen Streptococcus Mutansukmcc 1019. PhD thesis, Universiti Sains Malaysia.

Ng Tat Lun, Darren (2015) Synthesis And Characterisation Of Colloidal Alpo-S Nanocrystals Templated By L-Ethyl-2,3- Dimetiiylimidazolium Hydroxide. Masters thesis, Perpustakaan Hamzah Sendut.

Nidaullah, Hafiz (2018) Prevalence, Antibiotic Resistance And Genetic Diversity Of Salmonella Serovars Isolated From Various Meats Of Wet And Hypermarkets In Pulau Pinang And Perlis Malaysia. PhD thesis, Universiti Sains Malaysia.

Nisaa, Azka Ainun (2023) Anti-candida And Microbiota Properties Of Breastmilk. Masters thesis, Universiti Sains Malaysia.

Nongman, Abdul Fattah (2018) Production, Characterization And Mechanical Evaluation Of Biocomposite Based On Banana Pseudostem Fibre And Agar. Masters thesis, Universiti Sains Malaysia.

Noor, Nur Farizatul Husna Binti Mohd (2020) Analysis Of Palm Oil Waste After Pretreatment Using Environmental Recycling System (Ers) For The Potential Application As Animal Feed. Other. Universiti Sains Malaysia. (Submitted)

Nopianti, Rodiana (2011) Cryoprotective Effect Oflow Sweetness Sugar On Physicochemical Properties Of Threadfin Bream (Nemipterus Spp.) Surimi During Frozen Storage. Masters thesis, Universiti Sains Malaysia.

Nordin, Noor Afeefah (2018) Characterisation Of Cellulose Nanocrystals From Oil Palm Fronds For Carboxymethyl Cellulose Bio-Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Nordin, Rumaisa (2019) Drying Characteristics And Quality Attributes Of Black Tea Under Superheated Steam Drying. PhD thesis, Universiti Sains Malaysia.

Nordin, Syamilah (2021) Fungal Contamination Of Spices Used In Local Malaysian Cuisines. Project Report. Universiti Sains Malaysia. (Submitted)

Nur Aqilah Abdul Wahab, Siti (2020) Biosynthesis Of Poly(3-hydroxybutyrate) By Cupriaviadus Necator Dsm 428 Utilizing Waste Date Fruits As A Carbon Source. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Nurnadia Diyana Sulaiman, Wan (2020) Production Of Protein Hydrolysates From Soy Okara By Aspergillus Oryzae. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

O

Ong, Wen Le (2021) Optimization Of Papaya (Carica Papaya) Juice Quality Through Acidified Blanching Water And Pectinase Enzyme Pre-treatments. Project Report. Universiti Sains Malaysia. (Submitted)

Ooi, Jia Yi (2020) Development Of Cream Crackers Containing Coconut Palm Sugar: Nutritional Composition And Sensory Analysis. Project Report. Universiti Sains Malaysia. (Submitted)

Ooi , Seong Chuan (2016) Indoor Air Conditions And Energy Consumption In Air-Conditioned Office Rooms In Hot-Humid Climate : Towards Better Energy Management. Masters thesis, Universiti Sains Malaysia.

Oon, Li Juen Development Of Dried Black Grass Jelly (Mesona Chinensis) Containing Different Tapioca And Sago Starch Ratio. Project Report. Universiti Sains Malaysia. (Submitted)

Othman, Mohd Firdaus (2016) Production Of Acetic And Butyric Acid From Treated Leachate By Clostridium Butyricum Ncimb 7423 In Stirred Tank And Membrane Reactor. Masters thesis, Universiti Sains Malaysia.

Othman, Nur Hanani (2021) Development Of Rice-Based Snacks Fortified With Pumpkin Flour. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

P

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 311 – Enzyme Technology April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBK 212 – Renewable Biomass April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBK 312 – Issues In Bioprocess Technology April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBK 313 - Bioprocess Instrumentation & Control April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEG 102 – Introduction To Environmental Technology April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 202 – Food Commodities November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 209 – Physical Properties OF Food November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 212 – Management Of Halal Food November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 221 – Food Ingredients November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IMK 308 – Food Preservation Principles June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 308 – Food Preservation Principles November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 309 – Food Processing Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 101 – Principles Of Coatings Technology April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 105 – Bio-Resources Based Products June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 205 – Chemical Additives & Paper Properties June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 308 – Food Preservation Principles June 2010. [Teaching Resource]

PPIK, Pusat Pengajian Ilmu Kemanusiaan (1997) HMA 101 - PENGANTAR PENGAJIAN BAHASA MALAYSIA SEPT 1997. [Teaching Resource]

PPIK, Pusat Pengajian Ilmu Kemanusiaan (1989) HMP202 - STANDARDISASI BAHASA MALAYSIA EJAAN PERISTILAHAN DAN PERKAMUSAN MAC APRIL 1989. [Teaching Resource]

PPIK, Pusat Pengajian Ilmu Kemanusiaan (1994) HMP204 - LINGUISTIK SEJARAH DAN PERBANDINGAN BAHASA MELAYU POLINESIA APRIL 1994. [Teaching Resource]

PPIK, Pusat Pengajian Ilmu Kemanusiaan (1989) HMP204 - LINGUISTIK SEJARAH DAN PERBANDINGAN BAHASA MELAYU POLINESIA MAC APRIL 1989. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2004) JAS 362/2- Rekabentuk Struktur III (Februari/Mac 2004). [Teaching Resource] (Submitted)

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNG 240/3 - TEKNOLOGI PEMBUATAN I FEB 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 111/3 – MEKANIKAL BENDALIR I FEB-MAC 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 321/3 - MEKANIK BENDALIR II FEB-MAC 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 352/4 - SISTEM PERALATAN FEB-MAC 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 401/3 - ENJIN PEMBAKARAN DALAM FEB-MAC 2003. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 430/3 - MEKANIK PEPEJAL II FEB-MAC 2003. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 451/4 - GETARAN MEKANIK DAN KAWALAN AUTOMATIK FEB-MAC 2003. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 572/3- PEMBUATAN LANJUTAN FEB-MAC 2003. [Teaching Resource]

PPKA, PUSAT PENGAJIAN KEJURUTERAAN AWAM (1998) EAJ 443-4 - KEJURUTERAAN GEOTEKNIK LANJUTAN FEB 1998. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2007) EAS 354-3 REKABENTUK STRUCKTUR KAYU 7 KELULI APRIL 07. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAS 663-4 DYNAMICS AND STABILITY OF STRUCTURES OCT 04. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (1996) EBB 121-3 - BAHAN I OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1988) EBS 216-3 - UKUR II OKT 1988. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1998) EBS 217-3 - GEOMEKANIK FEB 1998. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1995) EBS 305-2 - MEKANIK BENDALIR OKT-NOV 1995. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1989) EBS 305-3 - MEKANIK BENDALIR OKT-NOV 1989. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1996) EBS 305-3 - MEKANIK BENDALIR OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 121-3 - BAHAN I SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 211-3 - METALURGI FIZIKAL SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 212-4 - RAW MATERIALS & STRUCTURAL CERAMICS APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 215-3 - SEMICONDUCTOR MATERIALS APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 220-3 - ENGINEERING POLYMER JUN 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 222-4 - PHYSICAL METALLURGY APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 316-3 - CORROSIONS & DEGRADATION APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 316-3 - CORROSIONS & DEGRADATION JUN 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1996) EBB 316-3 - KAKISAN & DEGRADASI OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 316-3 - KAKISAN & DEGRADASI SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 324-4 - ADVANCED MATERIALS AND COMPOSITES APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 336-3 - MATERIALS THERMODYNAMIC APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 338-3 - PROCESS CONTROL APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 341-3 - QUALITY CONTROL APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1996) EBB 404-2 - UNIT OPERASI DALAM PEMPROSESAN BAHAN OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1996) EBB 405-3 - PENYIASATAN KEGAGALAN & UJIAN TAK MUSNAH OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 405-3 - PENYIASATAN KEGAGALAN & UJIAN TAK MUSNAH SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 406-3 - PEMILIHAN BAHAN APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 409-3 - KUASA BENDALIR & MESIN TURBO APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBB 425-3 - REKABENTUK & PEMBANGUNAN BARANGAN SERAMIK APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 511-3 - MATERIALS CHARACTERISATION TECHNIQUE JUNE 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 511-3 - TEKNIK-TEKNIK PENCIRIAN BAHAN SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBB 512-3 - GAMBARAJAH KESEIMBANGAN FASA SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 512-3 - PHASE DIAGRAM AND PHASE EQUILIBRA JUN 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 524-3 - COMPOSITE MATERIALS JUN 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 204-3 ELASTOMERIC MATERIALS APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBP 303-3 BAHAN PLASTIK OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBP 310-3 PEMPROSESAN PLASTIK OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 314-3 - RESIN MANUFACTURING APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 314-3 PENGHASILAN RESIN APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBP 314-3 TEKNOLOGI PENGHASILAN RESIN APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 317-3 - ADVANCED POLYMER COMPOSITES APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 317-3 - KOMPOSIT POLIMER TERMAJU JUN 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 324-3 - POLYMER DEGRADATION AND ENVIRONMENT APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 400 REKABENTUK PRODUK DAN ANALISIS KEGAGALAN OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 400-3 - PRODUCT DESIGN AND FAILURE ANALYSIS NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBP 400-3 REKABENTUK PRODUK DAN ANALISIS KEGAGALAN OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBP 402-3 REKABENTUK ACUAN & DAI APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBP 402-3 REKABENTUK ACUAN & DAI APRIL-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP 415-3 - FIBRE PROCESSING NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP402-3 - REKABENTUK ACUAN & DAI APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBP412-3 - SPECIALITY ENGINEERING POLYMERS APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 215-3 - COMMUNICATION AND SIZING APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBS 215-3 - KOMINUSI & PENSAIZAN SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBS 215-3 KOMINUSI DAN PENSAIZAN FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 219-3 - INTRODUCTION TO MINING ENGINEERING APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBS 232-3 MINERALOGI OPTIK FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 232-3 OPTICAL MINERALOGY APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 242-3 - PETROGRAPHY & ORE MICROSCOPY APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 308-3 - MATERIALS TRANSPORT ENGINEERING APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 322-3 - PHYSICAL MINERAL PROCESSING NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 323-3 - PYROMETALLURGY APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 329-3 - ENGINEERING GEOPHYSICS APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 339-3 - MINERAL ECONOMICS APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 417-3 - GEOMECHANIS NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 419E-3 - BLASTING TECHNOLOGY APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBS 421-3 - GEOMEKANIK SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 432-3 - KIMIA ALAM SEKITAR UNTUK AMALAN KEJURUTERAAN APRIL 08. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2002) IPK 216-3 - PENGHASILAN RESIN APRIL 02. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1988) EBS 305 - MEKANIK BENDALIR OKT 1988. [Teaching Resource]

PPKE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1991) EET 409 - SISTEM KOMPUTER JUN 1991. [Teaching Resource]

PPKE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1991) EET 409 - SISTEM KOMPUTER MAC-APR 1991. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPE 441 MICRO AND NANO MANUFACTURING ENGINEERING (DEC 2015). [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Bangunan & Perancangan (School of Houusing, Building & Planning) (1991) RMT 554 - PROJEK MANAGEMENT III SEPT 1999. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (1996) AGW 601 - ORGANISATIONAL ANALYSIS AND DESIGN OKT-NOV 1996. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RLD 508 - PENILAIAN IMPAK ALAM SEKITAR FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RLD 512 - HIDROLOGI DAN KAWASAN TADAHAN FEB 01. [Teaching Resource]

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (2000) RLD 512/3 — Hidrologi dan Kawasan Tadahan - Februari 2000. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (2001) RMK 354 - Undang-Undang binaan - Februari - Mac 2001. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (1998) RMK 358 - Ekonomi Bangunan - Ogos - September 1998. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (1998) RMT 553 - Project Management II - August - September 1998. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (1998) RMT 553 -Pengurusan Projek II - Ogos - September 1998. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (2000) RMT 555 — Pengurusan Projek IV - Februari 2000. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perancangan (1998) RPG 131 - Kaedah Kuantitatif Gunaan - Ogos - September 1998. [Teaching Resource] (Submitted)

PPPBP, Pusat Pengajian Perumahan Bangunan Dan Perumahan (1998) RPK 334 - Perancangan Lalulintas - Ogos - September 1998. [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JAL 33113- Kejuruteraan Pengangkutan Dan Lalu Lintas (Februari /Mac 2004). [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JIF 319- Fizik Pengkomputeran (Februari/Mac 2004). [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JNK 130/3 - Mekanik Kejuruteraan - Februari - Mac 2004. [Teaching Resource]

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JNK 231/3 - Mekanik Mesin - Februari - Mac 2004. [Teaching Resource]

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JNK 303/4 - Termodinamik Gunaan Dan Pemindahan Haba - Februari - Mac 2004. [Teaching Resource]

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JNK 320/3 - Mekanik Pepejal I - Februari - Mac 2004. [Teaching Resource]

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JNK 321/3 - Mekanik Bendalir II - Februari - Mac 2004. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 405 – FOOD PACKAGING NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) 1EK 101 - PENGHITUNGAN PROSES KIMIA SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) 1PK 314/2 - KEJURUTERAAN GETAH. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) EBB 212-4 - SERAMIK I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) EBB 213 - POLIMER & KOMPOSIT OKT 1988. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) EBB 213-3 - POLIMER & KOMPOSIT OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) EBB 216-2 - KAWALAN MUTU APRIL 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) EBB 218 - PROSES-PROSES PENGANGKUTAN JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) EBB 218-3 - PROSES PENGANGKUTAN FEB 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) EBB 218-3 - PROSES-PROSES PENGANGKUTAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) EBB 218-3 - PROSES-PROSES PENGANGKUTAN OKT NOV 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) EBB 218-3 - PROSES-PROSES PENGANGKUTAN OKT NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) EBB 219-3 - TERMODINAMIK BAHAN APRIL 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) EBB 220-3 - POLIMER I OKT NOV 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) EK 317 – ENVIRONMENTAL MANAGEMENT APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IBG 102 – BIOLOGY FOR TECHNOLOGISTS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IBG 102 – BIOLOGY FOR TECHNOLOGISTS APRIL-MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IBG 202 – INDUSTRIAL MICROBIOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IBG 202 – Industrial Microbiology November 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IBG 204 – BIOANALYSIS II APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IBK 101-3 - SAINS BAHAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IBK 101-3 SAINS BAHAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IBK 201 – FUNDAMENTALS OF BIOPROCESS TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IBK 212 – RENEWABLE BIOMASS APR MAY 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IBK 314 – DOWNSTREAM PROCESS TECHNOLOGY APRIL-MAY 2011. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) ICO 390-3 - PEMPROSESAN ISYARAT DIGIT SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEG 100 - INTRODUCTION TO ENVIRONMENTAL TECHNOLOGY APR 06. [PENGENALAN KEPADA TEKNOLOGI PERSEKITARAN]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEG 100/3 - PENGENALAN TEKNOLOGI PERSEKITARAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEG 100/4 -PENGENALAN TEKNOLOGI PERSEKITARAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEG 101 – INTRODUCTION TO ENVIRONMENTAL SCIENCE MAY 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEG 101 – INTRODUCTION TO ENVIRONMENTAL SCIENCE MAY 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEG 102 - INTRODUCTION TO ENVIRONMENTAL TECHNOLOGY APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 101 - CHEMICAL PROCESS CALCULATIONS APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 101 - CHEMICAL PROCESS CALCULATIONS JUNE 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 101 - PENGHITUNGAN PROSES KIMIA MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 101- CHEMICAL PROCESS CALCULATIONS APR 06. [PENGHITUNGAN PROSES KIMIA]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IEK 101- PENGHITUNGAN PROSES KIMIA OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 101/3 - PERHITUNGAN PROSES KIMIA FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 102 - TREATMENT DISPOSAL & MANAGEMENT OF SOLID & SCHEDULED WASTE APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 102 - TREATMENT, DISPOSAL & MANAGEMENT OF SOLID & SCHEDULED WASTE APR 06. [PENGOLAHAN, PELUPUSAN & PENGURUSAN SISA PEPEJAL & SISA TERJADUAL]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 102 13 - PENGOLAHAN, PELUPUSAN DAN PENGURUSAN SISA PEPEJAL & SISA TERTADUAL FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 102/3 - PENGOLAHAN PELUPUSAN PENGURUSAN SISA PEPEJAL DAN SISA TERJADUAL FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IEK 103 - OPERASI UNIT I OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 103 - UNIT OPERATIONS I APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 103- OPERASI UNIT I MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 103/3 - OPERASI UNIT I FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 10313 - OPERASI UNIT 1 FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 105 - BIOCHEMISTRY APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 105 – TREATMENT & MANAGEMENT OF SOLID WASTE APRIL-MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 106/3 - SISTEM PERUNDANGAN PERSEKITARAN KESIHATAN DAN KESELAMATAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 107 - THERMODINAMIK APRIL-MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 107 - THERMODYNAMICS APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 107/3 - TERMODINAMIK FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 108 – PROCESS FLUID MECHANICS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 108 – PROCESS FLUID MECHANICS APRIL-MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 203 - REKABENTUK PERALATAN PENGOLAHAN AIR APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 203E - WATER TREATMENT PLANT DESIGN APR 06. [REKABENTUK PERALATAN PENGOLAHAN AIR]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 204 - OPERASI UNIT II SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 205 - TEKNOLOGI KAWALAN PENCEMARAN UDARA APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 205 - TEKNOLOGI KAWALAN PENCEMARAN UDARA APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 205 – AIR POLLUTION CONTROL TECHNOLOGY APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 205/3 - TEKNOLOGI KAWALAN PENCEMARAN UDARA FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 205/3 - TEKNOLOGI KAWALAN PENCEMARAN UDARA FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 206 - OPERASI UNIT 11 JUN 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 206 - OPERASI UNIT 111 MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 206 - OPERASI UNIT III APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 206 - OPERASI UNIT III APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 206/3 - OPERASI UNIT III FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 206/3 - OPERASI UNIT III FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 208 /3 - PERALATAN PENGOLAHAN HINGAR DAN BUNYI FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 208/3 - PERALATAN PENGOLAHAN HINGAR DAN BUNYI FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 208E - NOISE AND SOUND CONTROL TECHNOLOGY MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 209 - SISTEM PERUNDANGAN PERSEKITARAN KESIHATAN DAN KESELAMATAN APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 209 - SISTEM PERUNDANGAN PERSEKITARAN, KESIHATAN DAN KESELAMATAN JUN 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 209/3 - SISTEM PERUNDANGAN PERSEKITARAN, KESIHATAN DAN KESELAMATAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 211 – EQUIPMENT DESIGN FOR WATER TREATMENT APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 212 – PROCESS HEAT TRANSFER NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 213 – MASS TRANSFER AND SEPARATION PROCESSES APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IEK 214-3 - KEJURUTERAAN ELEKTRIK SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 215 – ENVIRONMENTAL,SAFETY AND HEALTH LEGISLATION APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 303/3 - PENGURUSAN SISA TERJADUAL INDUSTRI FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 304E - NOISE AND SOUND CONTROL TECHNOLOGY [PERALATAN PENGOLAHAN HINGAR DIN BUNYI] APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 305 - REKABENTUK PERALATAN PENGOLAHAN AIR SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 307 – NOISE AND VIBRATION CONTROL TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 308 – INDUSTRIAL WASTEWATER TREATMENT PLANT DESIGN NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 308/3 - REKABENTUK LOJI PENGOLAHAN AIR SISA INDUSTRI FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 308/3 - REKABENTUK LOJI PENGOLAHAN AIR SISA INDUSTRI FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 309 - KIMODINAMIK SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IEK 309-3 - KIMODINAMIK SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 309E - CHEMODYNAMICS SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 311 - MASYARAKAT DAN ALAM SEKITAR NOV 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 314 - AUDIT PERSEKITARAN SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 314 – ENVIRONMENTAL AUDIT NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IEK 316 - SISTEM PENGURUSAN PERSEKITARAN APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IEK 316 - SISTEM PENGURUSAN PERSEKITARAN APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IEK 316/3 - SISTEM PENGURUSAN PERSEKITARAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 316/3 - SISTEM PENGURUSAN PERSEKITARAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IEO 492 - LITAR ELEKTRONIK TERKAMIL SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IEO 493-3 - KOMUNIKASI II SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IFL 423-6 PEMPROSESAN DAN PENGILANGAN MAKANAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IIK 404-3 - TEKNOLOGI POLIMER (GETAH) II JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 101-201-3 - PENGHITUNGAN PROSES KIMIA SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IKK 101-3 & IKK 201-3 - PENGHITUNGAN PROSES KIMIA OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 101/201/3 - Penghitungan Proses Kimia. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 200-4 - PENGANTAR OPERASI PEMINDAHAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IKK 200-4 - PENGANTAR OPERASI PEMINDAHAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 200-4 - PENGANTAR OPERASI PEMINDAHAN JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IKK 200-4 PENGANTAR OPERASI PEMINDAHAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 200/4 - PENGANTAR OPERASI PEMINDAHAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 200/4 - PENGANTAR OPERASI PEMINDAHAN JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 200/4 - PENGANTAR OPERASI PEMINDAHAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 200/4 - PENGANTAR OPERASI PEMINDAHAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 200/4 - PENGANTAR OPERASI PEMINDAHAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 201 - PENGHITUNGAN PROSES KIMIA JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 201 - PENGHITUNGAN PROSES KIMIA JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 201 - PENGHITUNGAN PROSES KIMIA OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 201 -3 - PENGHITUNGAN PROSES KIMIA SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 201-3 - PENGHITUNGAN PROSES KIMIA JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 201-3 PENGHITUGAN PROSES KIMIA JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IKK 201-3 PENGHITUNGAN PROSES KIMIA SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 201/3 - Penghitungan Proses Kimia. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 201/3 - PENGHITUNGAN PROSES KIMIA JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 201/3 - PENGHITUNGAN PROSES KIMIA JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 201/3 - PENGHITUNGAN PROSES KIMIA OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 201/3 - PENGHITUNGAN PROSES KIMIA OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 201/3 - PENGHITUNGAN PROSES KIMIA OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 203 - OPERASI UNIT I MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 203-4 - OPERASI UNIT I MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 203-4 - OPERASI UNIT I JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IKK 203-4 - OPERASI UNIT I SIDANG 1988. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 203-4 - OPRASI UNIT I JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 203-4 OPERASI UNIT I JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 203-4 OPERASI UNIT I JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IKK 203-4 OPERASI UNIT I SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 203/4 - OPERASI UNIT I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 203/4 - OPERASI UNIT I JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 203/4 - OPERASI UNIT I MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 203/4 - OPERASI UNIT I OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 203/4 - OPERASI UNIT MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 203/4 - Operasi Unit 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 203/4 - Operasi Unit I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IKK 203/4,IKK 205/3 - Operasi Unit I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IKK 204/2 & IKK304/2 - Operasi Unit II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 205-3 - OPERASI UNIT I SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 304 - OPERASI UNIT II OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IKK 304-2 - OPERASI UNIT II SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 304-2 - OPERASI UNIT II JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 304-2 - OPERASI UNIT II JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 304-2 - OPERASI UNIT II JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 304-2 - OPERASI UNIT II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 304-2 - OPERASI UNIT II SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 304/2 - OPERASI UNIT II JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 304/2 - OPERASI UNIT II JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 304/2 - OPERASI UNIT II JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 304/2 - OPERASI UNIT II OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 304/2 - OPERASI UNIT II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 304/2 - OPERASI UNIT II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 406 - OPERASI UNIT III MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 406-4 - OPERASI UNIT III MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IKK 406-4 - OPERASI UNIT III SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 406-4 - OPERASI UNIT III APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKK 406-4 - OPERASI UNIT III JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IKK 406-4 - OPERASI UNIT III JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IKK 406-4 - OPERASI UNIT III JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IKK 406-4 - OPERASI UNIT III SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 406/4 - OPERASI UNIT III JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 406/4 - OPERASI UNIT III JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IKK 406/4 - OPERASI UNIT III JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IKK 406/4 - OPERASI UNIT III MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IKK 406/4 - OPERASI UNIT III MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IKK 406/4 - Operasi Unit III. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IKK 406/4 - Operasi Unit III. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IKM 310-3 - MIKROBIOLOGI MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 102/4 - Biokimia Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 10214- Biokimia Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMG 103 - FOOD CHEMISTRY APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMG 103 – FOOD CHEMISTRY APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMG 103/3 - KIMIA MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 103/3 - KIMIA MAKANAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 201 - MIKROBIOLOGI MAKANAN SEPTEMBER 2002. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 201-4 - MIKROBIOLOGI MAKANAN OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 201-4 - MIKROBIOLOGI MAKANAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 203 - ANALISIS KIMIA MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 203 – CHEMICAL ANALYSIS OF FOOD JUN 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 203 – CHEMICAL ANALYSIS OF FOOD NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 203-4 - ANALISIS MAKANAN I OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 203-4 - ANALISIS MAKANAN I SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMG 204 - ANALISIS PERALATAN MAKANAN APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 204 - ANALISIS PERALATAN MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMG 204 – INSTRUMENTAL ANALYSIS OF FOOD APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMG 204 – INSTRUMENTAL ANALYSIS OF FOOD APRIL-MAY 2011. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 204-4 - ANALISIS MAKANAN OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 204-4 ANALISIS MAKANAN II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 205 & IMG 313 - Prinsip-Prinsip Pengawetan Makanan 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 206/3 - Prinsip Pengawetan Makanan II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 207/3 - Pembungkusan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IMG 208 - BIOTEKNOLOGI MAKANAN MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 208/4 & IMG 304/4 - BIOTEKNOLOGI MAKANAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMG 208/4 - BIOTEKNOLOGI MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMG 210-3 - MIKROBIOLOGI MAKANAN I JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMG 210/3 - MIKROBIOLOGI MAKANAN I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMG 210/3 - MIKROBIOLOGI MAKANAN I JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 211 – FOOD MICROBIOLOGY I NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMG 222 - MIKROBIOLOGI MAKANAN II APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMG 222 – FOOD MICROBIOLOGY II APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 302/4 - PEMPROSESAN MAKANAN II FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMG 305 - PEMBUNGKUSAN MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IMG 306 - PENILAIAN DERIA DAN JAMINAN MUTU MAKANAN APR 06. [SENSORY EVALUATION AND QUALITY ASSURANCE OF FOOD]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMG 306/3 - PENILAIAN DAN JAMINAN MUTU MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 312 - TEKNOLOGI FERMENTASI MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMG 312-3 - TEKNOLOGI FERMENTASI MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMG 312-4 - TEKNOLOGI FERMENTASI SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMG 312-4 TEKNOLOGI FERMENTASI SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMG 312/4 - TEKNOLOGI FERMENTASI APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 312/4 - TEKNOLOGI FERMENTASI JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMG 312/4 - TEKNOLOGI FERMENTASI MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 312/4 - TEKNOLOGI FERMENTASI MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 314 - PEMBUNGKUSAN MAKANAN OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMG 314-2 - PEMBUNGKUSAN MAKANAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMG 314-2 - PEMBUNGKUSAN MAKANAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 314-2 - PEMBUNGKUSAN MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMG 314/2 - Pembungkusan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMG 314/2 - PEMBUNGKUSAN MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMG 314/2 - PEMBUNGKUSAN MAKANAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 314/2 - PEMBUNGKUSAN MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMG 315 – BIOTEKNOLOGI MAKANAN NOV 2008. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 315 – FOOD BIOTECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 316 - PENILAIAN DERIA MAKANAN OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMG 316-2 - PENILAIAN DERIA MAKANAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 316-2 - PENILAIAN PENDERIAA MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 316/2 - PENILAIAN DERIA MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMG 316/2 - PENILAIAN PENDERIA MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMG 317/3 - Teknologi Enzim. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IMG 318-4 - BIOTEKNOLOGI MAKANAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IMG 319-2 - TEKNOLOGI PEMBUNGKUSAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 319-2 - TEKNOLOGI PEMBUNGKUSAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 319-2 TEKNOLOGI PEMBUNGKUSAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMG 411 – SENSORY EVALUATION AND QUALITY ASSURANCE OF FOOD NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 414-3 - PRINSIP PENGAWETAN MAKANAN II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 415 - TEKNOLOGI ENZIM MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMG 415-4 - TEKNOLOGI ENZIM MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMG 415/4 - TEKNOLOGI ENZIM APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMG 415/4 - TEKNOLOGI ENZIM MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 415/4 - TEKNOLOGI ENZIM MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 416 - Penilaian Dan Kawalan Mutu Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMG 416/3 - Penilaian Dan Kawalan Mutu Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMG 418-4 - PENGOLAHAN & PENGGUNAAN SISA PEMPROSESAN MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMG 418/2 - Pengolahan & Penggunaan Sisa Pemprosesan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMG 418/4 - PENGOLAHAN DAN PENGGUNAAN SISA PEMPROSESAN MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMG 418/4 - PENGOLAHAN DAN PENGGUNAAN SISA PEMPROSESAN MAKANAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMG 418/4 - PENGOLAHAN DAN PENGGUNAAN SISA PEMPROSESAN MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMG 420-3 - PEMPROSESAN MAKANAN I SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMG 421/3 - Pemprosesan Makanan II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 205/3 - Bahan Makanan (Asal Tumbuhan). [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 101 - Biokimia Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 102 - BIOKIMIA MAKANAN MAC APRIL 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 102-3 - BIOKIMIA MAKANAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 102-3 - BIOKIMIA MAKANAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 102-3 - BIOKIMIA MAKANAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMK 102-3 BIOKIMIA MAKANAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 102/3 - BIOKIMIA MAKANAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 102/3 - BIOKIMIA MAKANAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 102/3 - BIOKIMIA MAKANAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 102/3 - BIOKIMIA MAKANAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 103 - INTRODUCTION TO FOOD SCIENCE AND TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 103 - PENGENALAN SAINS DAN TEKNOLOGI MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMK 104 - NUTRITION APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 104 – NUTRITION APRIL MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK 104/3 - PEMAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 104/3 - PEMAKANAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 105 - BIOKIMIA SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMK 201/2 & IMK 101/2 - Pemakanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 201/3- Biokimia Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IMK 202 - BAHAN MAKANAN APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 202 - KOMODITI MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 202 – FOOD COMMODITIES NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IMK 202-4 - BAHAN MAKANAN OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IMK 202/4 - BAHAN MAKANAN SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 205 - BAHAN MAKANAN (ASAL TUMBUHAN) OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 205-3 - BAHAN MAKANAN (ASAL TUMBUHAN ) SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 205-3 - BAHAN MAKANAN (ASAL TUMBUHAN) SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 205/3 - BAHAN MAKANAN (ASAL TUMBUHAN) MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 205/3 - BAHAN MAKANAN (ASAL TUMBUHAN) OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 205/3 - BAHAN MAKANAN (ASAL TUMBUHAN) OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 205/3 - BAHAN MAKANAN (ASAL TUMBUHAN) OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 206 - BAHAN MAKANAN ASAL HAIWAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 206-3 - BAHAN MAKANAN (ASAL HAIWAN). [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 206-3 BAHAN MAKANAN (ASAL HAIWAN) MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMK 206-3 BAHAN MAKANAN (ASAL HAIWAN) SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 206/3 - BAHAN MAKANAN ( ASAL HAIWAN ) MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 206/3 - BAHAN MAKANAN (ASAL HAIWAN) APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 206/3 - BAHAN MAKANAN (ASAL HAIWAN) APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 206/3 - BAHAN MAKANAN (ASAL HAIWAN) APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 206/3 - BAHAN MAKANAN (ASAL HAIWAN) MAC-APRIL 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 206/3 - Sains Makanan Haiwan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 207-2 - PEMAKANAN MANUSIA MAC APR 1990@. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 207-2 - PEMAKANAN MANUSIA MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 207-2 - PEMAKANAN MANUSIA SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMK 207-2 PEMAKANAN MANUSIA SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 207/2 - PEMAKANAN MANUSIA MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 207/2 - PEMAKANAN MANUSIA APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 207/2 - PEMAKANAN MANUSIA APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 207/2 - PEMAKANAN MANUSIA APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 207/2 - PEMAKANAN MANUSIA MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 207/2 - Pemakanan Manusia. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 208/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN I FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IMK 208/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN I FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 209 – PHYSICAL PROPERTIES OF FOOD JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK 209/2 - SIFAT-SIFAT FIZIKAL MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 209/2 - SIFAT-SIFAT FIZIKAL MAKANAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IMK 209/2 - SIFAT-SIFAT FIZIKAL MAKANAN FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 210/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 210/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN II FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IMK 210/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN II FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 212 – HALAL MANAGEMENT NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 221IMK 301 – FOOD INGREDIENTS NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 301 - INGREDIEN MAKANAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK 301E - FOOD INGREDIENTS SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IMK 302 - TEKNOLOGI PRODUK PRIMER TEMPATAN TERPILIH APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IMK 302 - TEKNOLOGI PRODUK PRIMER TEMPATAN TERPILIH OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 302 - TEKNOLOGI PRODUK PRIMER TEMPATAN TERPILIH SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK 302 - TEKNOLOGI PRODUK PRIMER TEMPATAN TERPILIH SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 303-3 - TEKNOLOGI POLIMER (AM) JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 304/2 - SAINS MAKANAN LANJUTAN APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IMK 304/2 - SAINS MAKANAN LANJUTAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IMK 305/2 - SANITASI KILANG MAKANAN SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IMK 305/2 - SANITASI KILANG PEMAKANAN SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IMK 307 - KESELAMATAN MAKANAN APR 06. [FOOD SAFETY]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 308 – FOOD PRESERVATION PRINCIPLES JUNE 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 308 – FOOD PRESERVATION PRINCIPLES NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 309 – FOOD PROCESSING TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 310 - MIKROBIOLOGI MAKANAN OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 310 - Mikrobiologi Makanan II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 310-2 - MIKROBIOLOGI MAKANAN II OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 310-2 - MIKROBIOLOGI MAKANAN II OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 310-3 - MIKROBIOLOGI MAKANAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 310-3 - MIKROBIOLOGI MAKANAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 310/3 - MIKROBIOLOGI MAKANAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 310/3 - MIKROBIOLOGI MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 310/3 - MIKROBIOLOGI MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 311 - ANALAISIS MAKANAN & PERUNDANGAN MAKANAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 311 - ANALISIS MAKANAN & PERUNDANGAN MAKANAN JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 311 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 311-3 - ANALISIS & PERUNDANGAN MAKANAN JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 311-3 - ANALISIS 7 PERUNDANGAN MAKANAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 311-3 - ANALISIS MAKANAN & PERUNDANGAN MAKANAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMK 311-3 ANALISIS MAKANAN DAN PERUNDANGAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 311-4 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 311-4 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 311/3 - ANALISIS & PERUNDANGAN MAKANAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 311/3 - ANALISIS DAN PERUNDANGAN MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 311/3 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 311/3 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 311/3 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 311/3 - ANALISIS MAKANAN DAN PERUNDANGAN MAKANAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 311/4 - Analisis Makanan & Perundangan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 313 - PRINSIP PENGAWETAN MAKANAN OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 313-3 - PRINSIP-PRINSIP PENGAWETAN MAKANAN OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 313-4 - PRINSIP PENGAWETAN MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IMK 313-4 PRINSIP-PRINSIP PENGAWETAN MAKANAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 313/3 - PRINSIP-PRINSIP PENGAWETAN MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 313/4 - PRINSIP-PRINSIP PENGAWETAN MAKANAN JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 313/4 - PRINSIP-PRINSIP PENGAWETAN MAKANAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 313/4 - PRINSIP-PRINSIP PENGAWETAN MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 313/4 - PRINSIP-PRINSIP PENGAWETAN MAKANAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 315 - SANITASI KILANG MAKANAN OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 315-2 - SANITASI KILANG MAKANAN SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 315-3 - SANITASI KILANG MAKANAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 315/2 - SANITASI KILANG MAKANAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 315/2 - SANITASI KILANG MAKANAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 315/2 - SANITASI KILANG MAKANAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 317-4 - ANALISIS MAKANAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 317-4 - ANALISIS MAKANAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 317/4 - Analisis Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 318-2 - REKABENTUK EKSPERIMEN DALAM PENYELIDIKAN MAKANAN OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 318/2 - Rekabentuk Eksperimen Dalam Penyelidikan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 404 – FOOD PRODUCT DEVELOPMENT NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 407 – FOOD SAFETY APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 407 – FOOD SAFETY JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 408-4 - PENGOLAHAN SISA DAN SANITASI PERKILANGAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IMK 408-4 - PENGOLAHAN SISA DAN SANITASI PERKILANGAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 413 - PRINSIP-PRINSIP PENGAWETAN MAKANAN JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 413-4 PRINSIP-PRINSIP PENGAWATAN MAKANAN OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IMK 413-4 - PRINSIP-PRINSIP PENGAWETAN MAKANAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 413/4 - Prinsip-Prinsip Pengawetan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 417 - PEMPROSESAN & PERKILANGAN MAKANAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IMK 417 - PEMPROSESAN DAN PERKILANGAN MAKANAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IMK 417-4 - PEMPROSESAN & PERKILANGAN MAKANAN. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IMK 417-4 - PEMPROSESAN DAN PERKILANGAN MAKANAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IMK 417-4 - PEMPROSESAN DAN PERKILANGAN MAKANAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IMK 417-4 - PEMPROSESAN DN PERKILANGAN MAKANAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IMK 417/4 - Pemprosesan Perkilangan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 417/4 - PEMPROSESAN & PERKILANGAN MAKANAN JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 417/4 - PEMPROSESAN & PERKILANGAN MAKANAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IMK 417/4 - PEMPROSESAN & PERKILANGAN MAKANAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IMK 417/4 - PEMPROSESAN DAN PERKILANGAN MAKANAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IMK 417/4 - PEMPROSESAN DAN PERKILANGAN MAKANAN JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 421 – PRIMARY PRODUCTS TECHNOLOGY JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 421 – PRIMARY PRODUCTS TECHNOLOGY NOV 2009 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 421 – PRIMARY PRODUCTS TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK208/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN I FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK210/3 - PENGAWETAN DAN PEMPROSESAN MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IMK307/3 - KESELAMATAN MAKANAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IML 415-3 METALURGI GUNAAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 10/13 - Kimia Polimer l. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 100 - PENGANTAR POLIMER OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 100-3 - PENGANTAR POLIMER SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 101 - Kimia Polimer I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 101/3 - SINTESIS POLIMER FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 102-3 - FIZIK POLIMER I OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 102-3 - FIZIK POLIMER I SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 201 - Kimia Polimer I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 201-3 - KIMIA POLIMER I MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 201-3 - KIMIA POLIMER I JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 201-3 - KIMIA POLIMER I OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 201-3 - KIMIA POLIMER I SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 201-3 - KIMIA POLIMER I SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 201-3 - KIMIA POLIMER I SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPK 201-3 KIMIA POLIMER I SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPK 201-3 KIMIA POLIMER I SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 201/3 - KIMIA POLIMER I JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 201/3 - KIMIA POLIMER I OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 201/3 - KIMIA POLIMER I OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 201/3 - Kimia Polimer I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 202 - FIZIK POLIMER I MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 202-3 - FIZIK POLIMER I SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 202-3 - FIZIK POLIMER I OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 202/3 - FIZIK POLIMER I MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 202/3 - FIZIK POLIMER I MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 203-3 - TEKNOLOGI PEREKAT DAN GENTIAN APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 203/3 - TEKNOLOGI PEREKAT DAN GENTIAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 203/3 - TEKNOLOGI PEREKAT DAN GENTIAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 203/3 - Teknologi Perekat Dan Gentian dan IPK 303/3 - Teknologi Polimer (Am). [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IPK 204 - TEKNOLOGI GETAH I APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 204 - TEKNOLOGI GETAH I OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 204-304-3 - TEKNOLOGI POLIMER (GETAH) I SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 204-304-3 - TEKNOLOGI POLIMER (GETAH) I SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 205 - Teknologi Plastik I & IPK 305 - Teknologi Polimer (Plastik) 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 205/4 - BAHAN PLASTIK FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 205i4 - TEKNOLOGI PLASTIK I FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IPK 206-3 - PENCIRIAN POLIMER SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 206-3 - PENCIRIAN POLIMER SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 206-301-3 - KIMIA POLIMER II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 216 dan IPK 417/3 - Teknologi Resin. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 216//3 - PENGHASILAN RESIN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 216/3 - PENGHASILAN RESIN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 218/3 - PEMPROSESAN LATEKS FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 218/3 - PEMPROSESAN LATEKS FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 301 - Kimia Polimer II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 301-3 - KIMIA POLIMER II MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPK 301-3 - KIMIA POLIMER II SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 301-3 - KIMIA POLIMER II JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 301-3 - KIMIA POLIMER II SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 301/3 - KIMIA POLIMER II JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 301/3 - KIMIA POLIMER II JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 301/3 - KIMIA POLIMER II JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 301/3 - KIMIA POLIMER II OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 301/3 - KIMIA POLIMER II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 301/3 - KIMIA POLIMER II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 302 - FIZIK POLIMER II MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 302-3 - FIZIK POLIMER II MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 302-3 207-3 - FIZIK POLIMER II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 302-3 FIZIK POLIMER II SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPK 302-3 FIZIK POLIMER II SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 302/3 - Fizik Polimer II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 302/3 - FIZIK POLIMER II JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 302/3 - FIZIK POLIMER II OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 302/3 - FIZIK POLIMER II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 302/3 - FIZIK POLIMER II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IPK 303-3 - TEKNOLOGI POLIMER (AM) APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 303-3 - TEKNOLOGI POLIMER (AM) I MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 303-3 - TEKNOLOGI POLIMER (AM) I SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 303-3 - TEKNOLOGI POLIMER (AM) SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 303-3 - TEKNOLOGI POLIMER(AM)I JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 303-3 TEKNOLOGI POLIMER (AM)APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 303/3 - TEKNOLOGI POLIMER (AM) APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 303/3 - TEKNOLOGI POLIMER (AM) MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 303/3 - TEKNOLOGI POLIMER MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 303/3 - Teknologi Polimer (Am). [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 304-3 - TEKNOLOGI POLIMER (GETAH) I JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 304-3 - TEKNOLOGI POLIMER (GETAH) I OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IPK 304-3 - TEKNOLOGI POLIMER (GETAH) I OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 304-3 - TEKNOLOGI POLIMER (GETAH) I SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 304-3 - TEKNOLOGI POLIMER (GETAH) I SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 304-3 -TEKNOLOGI POLIMER (GETAH) I OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPK 304-4 TEKNOLOGI POLIMER (GETAH) I SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 304/3 - TEKNOLOGI POLIMER (GETAH) I JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 304/3 - TEKNOLOGI POLIMER (GETAH) I OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 304/3 - TEKNOLOGI POLIMER (GETAH) I OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 304/3 - TEKNOLOGI POLIMER (GETAH) OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 304/3 - Teknologi Polimer (Getah) I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 305 - TEKNOLOGI POLIMER PLASTIK MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 305 - Teknologi Polimer (Plastik) I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IPK 305-4 - TEKNOLOGI POLIMER (PLASTIK) I APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 305-4 - TEKNOLOGI POLIMER (PLASTIK) I APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 305-4 - TEKNOLOGI POLIMER (PLASTIK) OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 305-4 - TEKNOLOGI POLIMER (PLASTIK) SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 305/4 - TEKNOLOGI POLIMER (PLASTIK) I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 305/4 - TEKNOLOGI POLIMER (PLASTIK) I MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 305/4 - TEKNOLOGI POLIMER (PLASTIK) I OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 306/3 - GETAH PEMPROSESAN DAN PRODUK FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 306/3 - TEKNOLOGI GETAH II FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 307 - PEMPROSESAN PLASTIK SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IPK 307 - TEKNOLOGI PLASTIK II SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IPK 307-3 - TEKNOLOGI PLASTIK II SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IPK 314 - KEJURUTERAAN GETAH APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 314-2 - KEJURUTERAAN GETAH APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 314/2 - KEJURUTERAAN GETAH FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 315 - PLASTIK KEJURUTERAAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 315-3 - PASTIK KEJURUTERAAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 315-3 - PLASTIK KEJURUTERAAN JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 315/3 - PLASTIK KEJURUTERAAN OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 316 - DEGRADASI POLIMER DAN ALAM SEKITAR SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 317/3 - KOMPOSIT POLIMER MAJU FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IPK 317/3 - KOMPOSIT POLIMER MAJU FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 403 - TEKNOLOGI POLIMER9AM) II SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 403-3 - TEKNOLOGI POLIMER (AM) II SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 403-3 - TEKNOLOGI POLIMER (AM) II JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 403-3 - TEKNOLOGI POLIMER (AM) II OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 403-3 - TEKNOLOGI POLIMER AM(II)JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IPK 404 - TEKNOLOGI POLIMER GETAH II MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 404-3 - TEKNOLOGI POLIMER (GETAH) II MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IPK 404-3 - TEKNOLOGI POLIMER (GETAH) II APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 404-3 - TEKNOLOGI POLIMER (GETAH) II APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 404-3 - TEKNOLOGI POLIMER (GETAH) II JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IPK 404-3 - TEKNOLOGI POLIMER (GETAH) II SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IPK 404-3 -TEKNOLOGI POLIMER (GETAH)II JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 404/3 - TEKNOLOGI POLIMER (GETAH) II MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 40413 - Teknologi Polimer (Getah) II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 405-3 - TEKNOLOGI POLIMER (PLASTIK) II JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 405-3 - TEKNOLOGI POLIMER (PLASTIK) II OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IPK 405-3 - TEKNOLOGI POLIMER (PLASTIK) II OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IPK 405-3 - TEKNOLOGI POLIMER (PLASTIK) II OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 405/3 - TEKNOLOGI POLIMER (PLASTIK) II JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IPK 405/3 - TEKNOLOGI POLIMER (PLASTIK) II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 405/3 - TEKNOLOGI POLIMER (PLASTIK) II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 405/3 - Teknologi Polimer (Plastik) II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 414 - KEJURUTERAAN GETAH APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IPK 414 - Kejuruteraan Getah. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 414-2 - KEJURUTERAAN GETAH APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IPK 414-2 - KEJURUTERAAN GETAH JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IPK 414-2 - KEJURUTERAAN GETAH OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IPK 414/2 - KEJURUTERAAN GETAH OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IPK 417-3 - TEKNOLOGI RESIN APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPL 412-2 KIMIA POLIMER III SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IPO 404-2 TEKNOLOGI POLIMER (GETAH) III SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IQK 105-3 - PERANTI SEMIKONDUKTOR MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 105-3 - PERANTI SEMIKONDUKTOR APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 105/3 - PERANTI SEMIKONDUKTOR APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 105/3 - PERANTI SEMIKONDUKTOR MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 105/3 - PERANTI SEMIKONDUKTOR MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 106-3 - MESIN ELEKTRIK APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 106/3 - MESIN ELEKTRIK APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IQK 111 - LITAR ELEKTRIK & ELEKTRONIK OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 111 - LITAR ELEKTRIK DAN ELEKTRONIK SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 111-3 - LITAR ELEKTRIK DAN ELEKTRONIK OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 111-3 - LITAR ELEKTRIK DAN ELEKTRONIK SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 111-3 - LITAR ELEKTRIK DAN ELEKTRONIK SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 114-3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IQK 121 - PERANTI SEMIKONDUKTOR APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 121 - Peranti Semikonduktor. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IQK 122 - MESIN ELEKTRIK APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 122 - MESIN ELEKTRIK APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 201 - MESIN ELEKTRIK OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 201 - Mesin Elektrik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 202 - Metrologi. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 202-3 - METROLOGI OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 202/3 - METROLOGI JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IQK 202/3 - METROLOGI OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 202/3 - METROLOGI OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 202/3 - METROLOGI OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 203 - Peranti Semikonduktor. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 203 - KEKUATAN BAHAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 203 - KEKUATAN BAHAN JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 203 - PERANTI SEMIKONDUKTOR OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 203/3 - KEKUATAN BAHAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 203/3 - KEKUATAN BAHAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 203/3 - KEKUATAN BAHAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 203/3 - KEKUATAN BAHAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 204/3 - TERMODINAMIK KEJURUTERAAN KIMIA APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 204/3 - TERMODINAMIK KEJURUTERAAN KIMIA APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 204/3 - TERMODINAMIK KEJURUTERAAN KIMIA APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 204/3 - TERMODINAMIK KEJURUTERAAN KIMIA MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 204/3 - TERMODINAMIK KEJURUTERAAN KIMIA MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 205 - TEKNOLOGI MIKROPEMPROSES APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 205/3 - TEKNOLOGI MIKROPEMPROSES APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 205/3 - TEKNOLOGI MIKROPEMPROSES APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 205/3 - TEKNOLOGI MIKROPEMPROSES MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 205/3 - TEKNOLOGI MIKROPEMPROSES MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 206 - MESIN ELEKTRIK MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 206/3 - MESIN ELEKTRIK JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IQK 206/3 - MESIN ELEKTRIK OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 207 - Sistem Digit. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 207/3 - SISTEM DIGIT JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IQK 207/3 - SISTEM DIGIT OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 207/3 - SISTEM DIGIT OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 207/3 - SISTEM DIGIT OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 207/3 - SISTEM DIGIT OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 208 - Sistem Peralatan & Ukuran I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 208/3 - SISTEM PERALATAN & UKURAN I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 208/3 - SISTEM PERALATAN & UKURAN I APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 208/3 - SISTEM PERALATAN & UKURAN I MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 208/3 - SISTEM PERALATAN & UKURAN I MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 208/3 - SISTEM PERALATAN DAN UKURAN I APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 210/2 - REKABENTUK UJIKAJI APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 210/3 - REKABENTUK UJIKAJI FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 211 - SISTEM DIGIT SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 211 - SISTEM DIGIT SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 211-3 - SISTEM DIGIT SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 211/3 - SISTEM DIGIT SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 212 - METROLOGI SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 212-3 - METROLOGI SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 212/3 - METROLOGI SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 212/3 - METROLOGI SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 213/3 - KEBOLEHPERCAYAAN DAN ANALISIS KEGAGALAN SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 213/IQK 404 - KEBOLEHPERCAYAAN DAN ANALISIS KEGAGALAN SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 214 - KAWALAN MUTU SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 214/3 - KAWALAN MUTU SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 221 - TEKNOLOGI MIKROPROSES APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 221/3 - TEKNOLOGI MIKROPROSES FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 222/3 - ASAS SISTEM PERALATAN & UKURAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 223 - TERMODINAMIK APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 223/3 - TERMODINAMIK APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 223/3 - TERMODINAMIK FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 224 - SISTEM KAWALAN APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 224/3 - SISTEM KAWALAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 302-3 - AUTOMASI DALAM KAWALAN PROSES JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 302/3 - AUTOMASI DALAM KAWALAN PROSES OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 302/3 - AUTOMASI DALAM KAWALAN PROSES OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 302/3 - AUTOMASI DALAM KAWALAN PROSES OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 302/3 - AUTOMASI DALAM KAWALAN PROSES OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 303/3 - ANALISIS & KAWALAN SISTEM-SISTEM PROSES OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 303/3 - ANALISIS & KAWALAN SISTEM-SISTEM PROSES OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 303/3 - ANALISIS & KAWALAN SISTEM-SISTEM PROSES OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 303/3 - ANALISIS DAN KAWALAN SISTEM-SISTEM PROSES OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 303/3 - Analisis & Kawalan Sistem-Sistem Proses. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 304/3 - Teknologi Pengeluaran. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IQK 304/3 - TEKNOLOGI PENGELUARAN OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 304/3 - TEKNOLOGI PENGELUARAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 304/3 - TEKNOLOGI PENGELUARAN OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 304/3 - TEKNOLOGI PENGELUARAN OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 305 - PERALATAN KAWALAN PROSES JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 305/3 - PERALATAN KAWALAN PROSES APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 305/3 - PERALATAN KAWALAN PROSES APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 305/3 - PERALATAN KAWALAN PROSES MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 306-214-3 KAWALAN MUTU SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 306/214/3 - KAWALAN MUTU SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 306/3 - KAWALAN MUTU II APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 306/3 - KAWALAN MUTU II APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 306/3 - KAWALAN MUTU II MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 307 - ANALISIS KEGAGALAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 307/3 - ANALISIS KEGAGALAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 307/3 - ANALISIS KEGAGALAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 308 - Ergonomik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 308/3 - ERGONOMIK APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 308/3 - ERGONOMIK APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 308/3 - ERGONOMIK APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 308/3 - ERGONOMIK MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 309 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN I OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 309-4 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 309/4 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 310/3 - SISTEM KAWALAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IQK 311 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN II APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 311 - Automasi Perindustrian Dan Teknologi Pembuatan". [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 312 - TEKNOLOGI MIKROPROSES OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IQK 313 - SISTEM PERALATAN DAN UKURAN II APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 313-3 - SISTEM PERALATAN DAN UKURAN II SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 313/3 - SISTEM PERALATAN DAN UKURAN II SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 313/402/3 - SISTEM PERALATAN UKURAN II OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 314 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN I SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 314 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN I SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 314/3 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN I SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 315 - SISTEM PERALATAN DAN UKURAN II APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 315 - SISTEM PERALATAN DAN UKURAN II SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 315/3 - SISTEM PERALATAN DAN UKURAN II SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 315/3 - SISTEM PERALATAN DAN UKURAN II SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 316 - PENGAJIAN KES KAWALAN MUTU SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IQK 316 - PENGAJIAN KES KAWALAN MUTU SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IQK 316/2 - PENGAJIAN KES KAWALAN MUTU SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IQK 321/4 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN II FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IQK 321/4 - AUTOMASI PERINDUSTRIAN DAN TEKNOLOGI PEMBUATAN II FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IQK 321/IQK 311 - AUTOMASI PERINDUSTRIAN & TEKNOLOGI PEMBUATAN II APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 402 - SISTEM PERALATAN & UKURAN II JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 402/3 - Sistem Peralatan Dan Ukuran II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 402/3 - SISTEM PERALATAN & UKURAN II JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 402/3 - SISTEM PERALATAN DAN UKURAN II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 402/3 - SISTEM PERALATAN DAN UKURAN II OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 402/3 - SISTEM PERALATAN DAN UKURAN II OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 403 - AUTOMASI INDUSTRI JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 403/3 - Automasi Industri. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IQK 403/3 - AUTOMASI INDUSTRI OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 403/3 - AUTOMASI INDUSTRI OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 403/3 - AUTOMASI INDUSTRI OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 403/3 - AUTOMASI INDUSTRI OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 404 - Kebolehpercayaan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 404-213-3 - KEBOLEHPERCAYAAN DAN ANALISIS KEGAGALAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 404/213/3 - KEBOLEHPERCAYAAN DAN ANALISIS KEGAGALAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 404/3 - Kebolehpercayaan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IQK 405 - REKABENTUK UJIKAJI OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 405/3 - REKABENTUK UJIKAJI OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IQK 405/3 - Rekabentuk Ujikaji. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK 406 - Susunatur Kilang Dan Pengendalian Bahan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IQK 406/2 - SUSUNATUR KILANG DAN PENGENDALIAN BAHAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IQK 406/2 - SUSUNATUR KILANG DAN PENGENDALIAN BAHAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IQK122 - Mesin Elektrik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IRK 304/2 - Operasi Unit II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) ITL 430-3 - KILANG KIMIA DAN PROSES KIMIA IIIA SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) ITL 430-3 KILANG KIMIA DAN PROSES KIMIA III A SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) ITO 430-3 KILANG KIMIA DAN PROSES KIMIA IIIB SIDANG 1986-87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 101 - SAINS BAHAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUK 101-3 - SAINS BAHAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 101/3 - SAINS BAHAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IUK 101/3 - SAINS BAHAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 101/3 - SAINS BAHAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 101/3 - SAINS BAHAN MAC-APRIL 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 1013 - SAINS BAHAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 104 - MEKANIK KEJURUTERAAN MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 104 - Mekanik Kejuruteraan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 104 - Mekanik Kejuruteraan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUK 104-3 - MEKANIK KEJURUTERAAN MAC APR 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IUK 104-3 - MEKANIK KEJURUTERAAN SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IUK 104-3 MEKANIK KEJURUTERAAN SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 104/3 - MEKANIK KEJURUTERAAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IUK 104/3 - MEKANIK KEJURUTERAAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 104/3 - MEKANIK KEJURUTERAAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 104/3 - MEKANIK KEJURUTERAAN JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 104/3 - MEKANIK KEJURUTERAAN JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 104/3 - MEKANIK KEJURUTERAAN MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 104/3 - MEKANIK KEJURUTERAAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 105 - Aplikasi Komputer Perindustrian. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 105 - APLIKASI KOMPUTER PERINDUSTRIAN OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 105 - APLIKASI KOMPUTER PERINDUSTRIAN OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IUK 105 - APLIKASI KOMPUTER PERINDUSTRIAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 105 - APLIKASI KOMPUTER PERINDUSTRIAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 105 - Aplikasi Komputer Perindustrian. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 105 - Aplikasi Komputer Perindustrian. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IUK 105 - COMPUTER APPLICATION IN INDUSTRY JUNE 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 105-4 APLIKASI KOMPUTER PERINDUSTRIAN SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 105/4 - APLIKASI KOMPUTER PERINDUSTRIAN SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 105/4 - APLIKASI KOMPUTER PERINDUSTRIAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 105E - COMPUTER APPLICATIONS IN INDUSTRY JUN 06. [APLIKASI KOMPUTER PERINDUSTRIAN]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 105E - COMPUTER APPLICATIONS IN INDUSTRY JUNE 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 106 - STATISTIK UNTUK TEKNOLOGI OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IUK 106 - STATISTIK UNTUK TEKNOLOGIS SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 106 - STATISTIK UNTUK TEKNOLOGIS SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 106-3 - STATISTIK UNTUK TEKNOLOGIS SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 106/3 - STATISTIK UNTUK TEKNOLOGIS SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 106E - STATISTICS FOR TECHNOLOGIST JUN 06. [STATISTIK UNTUK TEKNOLOGIS]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 106E - STATISTIK UNTUK TEKNOLOGIS SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IUK 107 – CHEMISTRY FOR TECHNOLOGIST NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 108 – STATISTIK DENGAN APLIKASI KOMPUTER NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 114 - KEJURUTERAAN ELEKTRIK MAC APRIL 1989 0000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 114-3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 114/3 - KEJURUTERAAN ELEKTRIK & ELEKTRONIK OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 191 - MATEMATIK I APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 191 - MATEMATIK I OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 191 - MATEMATIK I SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 191 - MATEMATIK I SEPT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IUK 191 - MATEMATIK I SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IUK 191 – MATHEMATIC I NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 191 – MATHEMATICS I NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 191/4 - MATEMATIK FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 191/4 - MATEMATIK I APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IUK 191/4 - MATEMATIK I OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IUK 191/4 - MATEMATIK I SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 191/4 - Matematik I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 191E - MATEMATIK I SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 191E - MATHEMATIC I JUN 06. [MATEMATIK I]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IUK 203 - REKABENTUK UJIKAJI APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 203 - REKABENTUK UJIKAJI APRIL-MEI 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IUK 203 - REKABENTUK UJIKAJI MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 203 - Rekabentuk Ujikaji. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 203/2 - REKABENTUK UJIKAJI FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 203/2 - REKABENTUK UJIKAJI FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IUK 204 - PERKEMBANGAN PRODUK APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 204/3 - PERKEMBANGAN PRODUK FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 204/3 - PERKEMBANGAN PRODUK FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 204/3 - PERKEMBANGAN PRODUK FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 204/3 - PERKEMBANGAN PRODUK FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 207-3 - KAEDAH DAN AMALAN TEKNOLOGIS OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUK 207-3 - KAEDAH DAN AMALAN TEKNOLOGIS JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUK 207-3 - KAEDAH DAN AMALAN TEKNOLOGIS SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IUK 207-3 KAEDAH DAN AMALAN TEKNOLOGIS SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUK 207/3 - KAEDAH DAN AMALAN TEKNOLOGIS OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 208 – EXPERIMENTAL DESIGN WITH COMPUTER APPLICATIONS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 208 – EXPERIMENTAL DESIGN WITH COMPUTER APPLICATIONS JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IUK 291 - MATEMATIK APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 291 - MATEMATIK I SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IUK 291 - MATEMATIK II APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 291 - MATEMATIK II JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 291 - MATEMATIK II SEPT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IUK 291 - MATEMATIK II SEPT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IUK 291 - MATEMATIK II SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IUK 291 - Matematik II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 291 – MATEMATIK II APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 291 – MATHEMATICS II JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 291/4 - MATEMATIK II FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IUK 291/4 - MATEMATIK II OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IUK 291/4 - MATEMATIK II SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 291E - MATHEMATIC II JUN 06. [MATEMATIK II]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 291E/4 - MATHEMATICS II FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 302/3 - PENGURUSAN INDUSTRI FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 302/3 - PENGURUSAN INDUSTRI FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IUK 303 - PENGURUSAN SISA INDUSTRI SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IUK 303 - PENGURUSAN SISA INDUSTRI SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 303 - PENGURUSAN SISA INDUSTRI SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IUK 303/3 - PENGURUSAN SISA INDUSTRI SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IUK 304 - PENGURUSAN KUALITI INDUSTRI APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IUK 304 – PENGURUSAN KUALITI INDUSTRI APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUL 105 - FIZIK AM I OKT NOV 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUL 105-3 - FIZIK AM I JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUL 105-3 - FIZIK AM I JUN 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) IUL 105-3 - FIZIK AM I SIDANG 1988 89. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IUL 105-3 FIZIK AM I SIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1987) IUL 105-3 FIZIK AM I SIDANG 1986 87. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1988) IUL 105-3 FIZIK AM ISIDANG 1987 88. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUL 105/3 - FIZIK AM I JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUL 105/3 - FIZIK AM I JUN 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUL 105/3 - FIZIK AM I JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IUL 105/3 - FIZIK AM I OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IUL 105/3 - FIZIK AM I OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IUL 105/3 - FIZIK AM I OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IUL 105/3 - FIZIK AM I OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 100 - BIO-SUMBER SEBAGAI BAHAN MENTAH INDUSTRI OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 100 - BIO-SUMBER SEBAGAI BAHAN MENTAH INDUSTRI SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IWK 100 - LIGNOSELULOSA SEBAGAI BAHAN MENTAH INDUSTRI OGOS SEPT 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 100 - LIGNOSELULOSA SEBAGAI BAHAN MENTAH SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 100 – BIO-RESOURCE AS INDUSRIAL RAW MATERIALS NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 100/2 - LIGNOSELULOSA SEBAGAI BAHAN MENTAH INDUSTRI SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IWK 100/2 - LIGNOSELULOSA SEBAGAI BAHAN MENTAH INDUSTRI SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 101 - ASAS TEKNOLOGI PENGLITUP FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 101 - PRINCIPLES OF COATINGS TECHNOLOGY APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IWK 101 - TEKNOLOGI PENGLITUP I APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 101 – PRINCIPLES OF COATINGS TECHNOLOGY JUNE 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IWK 101& IYK 101 - Teknologi Penglitup l. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 101- ASAS TEKNOLOGI PENGLITUP JUN 06. [PRINCIPLES OF COATINGS TECHNOLOGY]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 101- ASAS TEKNOLOGI PENGLITUP MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 101/4 - ASAS TEKNOLOGI PENGLITUP FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 101/4 - ASAS TEKNOLOGI PENGLITUP FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IWK 102 & IYK 102 - Teknologi Kayu I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 102 - ASAS SAINS & TEKNOLOGI PERKAYUAN MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 102 - ASAS SAINS DAN TEKNOLOGI BIO-SUMBER SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 102 - ASAS SAINS DAN TEKNOLOGI BIOSUMBER JUN 06. [PRINCIPLES OF BIORESOURCE SCIENCE & TECHNOLOGY]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IWK 102 - TEKNOLOGI KAYU I APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 102 – PRINCIPLE OF BIO-RESOURCE SCIENCE AND TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 102 – PRINCIPLES OF BIO-RESOURCE SCIENCE & TECHNOLOGY NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 102/4 - ASAS SAINS DAN TEKNOLOGI PERKAYUAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 102/4 - ASAS SAINS DAN TEKNOLOGI PERKAYUAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 103 - PENGHASILAN PULPA & PENGITARAN KERTAS MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 103 – PULP PREPARATION AND PAPER RECYCLING APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 103/4 - PENGHASILAN PULPA DAN PENGITARAN KERTAS FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 103/4 - PENGHASILAN PULPA DAN PENGITARAN KERTAS FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 103/4 - PENGHASILAN PULPA DAN PENGITARAN KERTAS SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 103/4 - TEKNOLOGI KERTAS I APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 104 - MEKANIK KEJURUTERAAN FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 104 - MEKANIK KEJURUTERAAN MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 104 - MEKANIK KEJURUTERAAN MEI 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 104/3 - MEKANIK KEJURUTERAAN APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 104/3 - MEKANIK KEJURUTERAAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 104/3 - MEKANIK KEJURUTERAAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 105 - BIO-RESOURCE BASED PRODUCTS JUNE 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 105 - BIO-RESOURCES BASED PRODUCTS APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 105 – BIO-RESOURCES BASED PRODUCTS JUNE 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 105E/WW 202E - BIO-RESOURCES BASED PRODUCTS APR 06. [PRODUK BERASASKAN BIO-SUMBER]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 201 - BAHAN MENTAH DAN KIMIA PENGLIPUTAN SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IWK 201 - TEKNOLOGI PENGLITUP II APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IWK 201 - TEKNOLOGI PENGLITUP II SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 201 – RAW MATERIALS & COATING CHEMISTRY NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 201 – RAW MATERIALS & COATINGS CHEMISTRY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 201/4 - TEKNOLOGI PENGLITUP II APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IWK 201/4 - TEKNOLOGI PENGLITUP II APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 201/4 - TEKNOLOGI PENGLITUP II SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 201E/4 - BAHAN MENTAH DAN KIMIA PENGLITUPAN SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IWK 202 - TEKNOLOGI KAYU II APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 202 . /4 - TEKNOLOGI PANEL BERASASKAN KAYU. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 202/4 - TEKNOLOGI PANEL BERASASKAN KAYU FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 202E - PRODUCTS BASED ON BIO-RESOURCE MAR 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 202E - PRODUCTS BASED ON BIORESOURCE MAY 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 202E/4 - BIO-RESOURCES BASED PRODUCTS FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IWK 203 & IYK 303 - Teknologi Kertas II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 203 - PENYEDIAAN STOK & PEMBUATAN KERTAS FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 203 - PENYEDIAAN STOK & PEMBUATAN KERTAS MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 203 – STOCK PREPARATION & PAPER MAKING NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 203/4 - PENYEDIAAN STOK & PEMBUATAN KERTAS FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 203/4 - PENYEDIAAN STOK & PEMBUATAN KERTAS FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 204 - PEMBANGUNAN PRODUK BIOSUMBER KERTAS & PENGLITUP APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 204E - BIO-RESOURCE PAPER AND COATINGS PRODUCT DEVELOPMENT APR 06. [PERKEMBANGAN PRODUK BIO-SUMBER, KERTAS & PENGLITUP]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 205 - ADITIF & SIFAT KERTAS APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 205 – PAPER PROPERTIES AND ADDITIVES APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 301 - PROSES DAN PERALATAN PENGLITUPAN SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IWK 301 - TEKNOLOGI PENGLITUP III APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 301 – COATINGS PROCESS & EQUIPMENTS NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 301/3 - PROSES & PERALATAN PENGLITUPAN FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 301/3 - PROSES & PERALATAN PENGLITUPAN APRIL 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 301/3 - PROSES & PERALATAN PENGLITUPAN FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 302 - KEJURUTERAAN KAYU APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 302 - KEJURUTERAAN KAYU JUN 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 302 - KEJURUTERAAN KAYU SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 302 - KEJURUTERAAN KAYU SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IWK 302 - TEKNOLOGI KAYU III SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 302 – WOOD ENGINEERING APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 302 – WOOD ENGINEERING JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 302/3 - TEKNOLOGI KAYU III SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 303 - ADITIF DAN SIFAT KERTAS JUN 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 303 - ADITIF DAN SIFAT KERTAS SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 303/3 - ADITIF & SIFAT KERTAS SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 303/3 - TEKNOLOGI KERTAS 3 SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IWK 303/3 - TEKNOLOGI KERTAS 3 SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 304 - PENGELUARAN PERABUT SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1999) IWK 304 - PENGELUARAN PERABUT SEPT 1999. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 304 - PENGELUARAN PERABUT SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 304 – FURNITURE PRODUCT- NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2001) IWK 304/3 - PENGELUARAN PERABOT SEPT 01. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 305 - TEKNOLOGI PENGLITUP TERMAJU APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 305 /2 - TEKNOLOGI PENGLITUP TERMAJU FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 305 – ADVANCED TECHNOLOGY OF COATINGS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 305/2 - TEKNOLOGI PENGLITUP TERMAJU FEB 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 305E - ADVANCED COATINGS TECHNOLOGY APR 06. [TEKNOLOGI PENGLITUP TERMAJU]. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK 305E - ADVANCED COATINGS TECHNOLOGY MAY 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 305E - ADVANCED COATINGS TECHNOLOGY OCT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 305E - ADVANCED TECH. OF BIO-RESOURCE UTILIZATION PAPER & COATING SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2008) IWK 306 - GENTIAN DAN KOMPOSIT LIGNOSELULOSIK APRIL 08. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 306 - GENTIAN DAN KOMPOSIT LIGNOSELULOSIK FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 306 - GENTIAN DAN KOMPOSIT LIGNOSELULOSIK OKT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2006) IWK 307 - TEKNOLOGI KERTAS TERMAJU APR 06. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2002) IWK 307 - TEKNOLOGI KERTAS TERMAJU SEPT 02. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 307 – ADVANCED PAPER TECHNOLOGY – INSTRUMENTAL ANALYSIS FOR PULP & PAPER -NOVEMBER 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 307/2 - TEKNOLOGI KERTAS TERMAJU FEB-MAC 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK201E - RAW MATERIALS & COATINGS CHEMISTRY OCT 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK204E - BIO-RESOURCE PAPER AND COATINGS PRODUCT DEVELOPMENT MAR 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK306/2 - GENTIAN DAN KOMPOSIT LIGNOSELULOSIK FEBRUARI 2003. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2005) IWK307- TEKNOLOGI KERTAS TERMAJU MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 100-IWK 100-2 - LIGNOSELULOSA SEBAGAI BAHAN MENTAH SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 100/IWK 100/2 - LIGNOSELULOSO SEBAGAI BAHAN MENTAH INDUSTRI SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 101- Teknologi Penglitup 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 103 - Teknologi Kertas I. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 201/4 - TEKNOLOGI PENGLITUP I JUN 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1990) IYK 201/4 - TEKNOLOGI PENGLITUP I OKT-NOV 1990. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 201/4 - TEKNOLOGI PENGLITUP I OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 201/4 - TEKNOLOGI PENGLITUP I OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 201/4 - TEKNOLOGIS PENGLITUP I OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 202/4 - TEKNOLOGI KAYU I APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 202/4 - TEKNOLOGI KAYU I APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 202/4 - TEKNOLOGI KAYU I APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 202/4 - TEKNOLOGI KAYU I JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 202/4 - TEKNOLOGI KAYU I MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 202/4 - TEKNOLOGI KAYU I OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 203 - TEKNOLOGI KERTAS I MAC-APR 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 203/4 - TEKNOLOGI KERTAS I APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 203/4 - TEKNOLOGI KERTAS I APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 203/4 - TEKNOLOGI KERTAS I MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 211 - Teknologi Penglitup IA. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 212 - TEKNOLOGI KAYU IA APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 213/3 - Teknologi Kertas IA. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 222 - Teknologi Kayu IB. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 223 - Teknologi Kertas IB. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 301/4 - TEKNOLOGI PENGLIPUTAN II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 301/4 - TEKNOLOGI PENGLITUP II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 301/4 - TEKNOLOGI PENGLITUP II OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 301/4 - TEKNOLOGI PENGLITUP II OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 301/4 - Teknologi Penglitup II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 302/4 - TEKNOLOGI KAYU II APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 302/4 - TEKNOLOGI KAYU II APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 302/4 - TEKNOLOGI KAYU II MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 303 - Teknologi Kertas. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 303 - TEKNOLOGI KERTAS II APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 303/4 - TEKNOLOGI KAYU II APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 303/4 - TEKNOLOGI KERTAS II OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 303/4 - TEKNOLOGI KERTAS II OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 303/4 - TEKNOLOGI KERTAS II OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 304/4 - Rekabentuk Perabut. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 304/4 - REKABENTUK PERINDUSTRIAN APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 304/4 - REKABENTUK PERINDUSTRIAN APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 304/4 - REKABENTUK PERINDUSTRIAN APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 304/4 - REKABENTUK PERINDUSTRIAN MAC-APR 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1991) IYK 305/4 - ANALISIS DATA OKT-NOV 1991. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 305/4 - ANALISIS DATA OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 305/4 - ANALISIS DATA OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 305/4 - ANALISIS DATA OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 305/4 - Analisa Data. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 401-3 - TEKNOLOGI PENGLITUP III JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 401/3 - TEKNOLOGI PENGLITUP III APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 401/3 - TEKNOLOGI PENGLITUP III APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 401/3 - TEKNOLOGI PENGLITUP III APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 401/3 - Teknologi Penglitup III. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 401/3 - Teknologi Penglitup III. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 402-3 - TEKNOLOGI KAYU III JUN 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 402/3 - TEKNOLOGI KAYU III APRIL 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 402/3 - TEKNOLOGI KAYU III APRIL 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 402/3 - TEKNOLOGI KAYU III JUN 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 402/3 - TEKNOLOGI KAYU III OKT-OV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 402/3 - Teknologi Kayu III. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1995) IYK 403 - TEKNOLOGI KERTAS III APRIL 1995. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 403/3 - TEKNOLOGI KERTAS III OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 403/3 - TEKNOLOGI KERTAS III OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1992) IYK 404/4 - TEKNOLOGI PENGURUSAN OKT-NOV 1992. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1993) IYK 404/4 - TEKNOLOGI PENGURUSAN OKT-NOV 1993. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1994) IYK 404/4 - TEKNOLOGI PENGURUSAN OKT-NOV 1994. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 404/4 -Teknologi Pengurusan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 405-4 - TEKNOLOGI KAYU KERTAS DAN PENGLITUP MAJU SEPT OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) IYK 405/4 - TEKNOLOGI KAYU KERTAS DAN PENGLITUP MAJU SEPT-OKT 1997. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IYK 405/4 - Teknologi Kayu. Kertas Dan Penglitup Termaju. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) IYK 406/4 - TEKNOLOGI PENGLITUP III APRIL 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) Imk 417/4 - Pemprosesan Dan Perkilangan Makanan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) Iyk 221/3 - Teknologi Penglitup IB. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) lOK 204 - Termodinamik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lOK 221 & lOK 312 - Teknologi Mikro-Proses. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lOK 222/3 - Sistem Peralatan dan Ukuran 1. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lOK 224/310 - Sistem Kawalan. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lQK 12/13 - Peranti Semikonduktor. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lQK 122 - Mesin Elektrik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lQK 223 - Termodinamik. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lQK 311 - Automasi Perindustrian Dan Teknologi Pembuatan II. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) lQK 407 - Pengajaran Kes Kawalan Mutu & Rekabentuk Ujikaji. [Teaching Resource]

PPTI, Pusta Pengajian Teknologi Industri (2010) IMK 103 – INTRODUCTION TO FOOD SCIENCE AND TECHNOLOGY JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Indsutri (2010) IUK 303 – INDUSTRIAL WASTE MANAGEMENT APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1989) EBB 212 - SERAMIK I JUN 1989. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1998) EBB 219-3 - TERMODINAMIK BAHAN FEB 1998. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IBK 211 – FOOD BIOPROCESS TECHNOLOGY NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEG 102 – INTRODUCTION TO ENVIRONMENTAL TECHNOLOGY APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 101 – CHEMICAL PROCESS CALCULATIONS NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 105 – TREATMENT AND MANAGEMENT OF SOLID WASTE APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 107 – THERMODINAMIK APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 212 – PROCESS HEAT TRANSFER JUNE 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 213 – MASS TRANSFER AND SEPARATION PROCESSES JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IEK 306 – TREATMENT AND MANAGEMENT OF SCHEDULED WASTE NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IEK 309–CHEMODYNAMICS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMG 204 – INSTRUMENTAL ANALYSIS OF FOOD JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IMK 209 – PHYSICAL PROPERTIES OF FOOD JUNE 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IMK 308 – FOOD PRESERVATION PRINCIPLES JUNE 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IUK 304 – INDUSTRIAL QUALITY MANAGEMENT APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 100 – BIORESOURCE AS INDUSTRIAL RAW MATERIALS NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 101 - PRINCIPLES OF COATINGS TECHNOLOGY APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 105 – BIO-RESOURCE BASED PRODUCTS APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 203 – STOCK PREPARATION AND PAPERMAKING NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 204 – BIO-RESOURCE, PAPER AND COATINGS PRODUCT DEVELOPMENT APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 301 – COATINGS PROCESS & EQUIPMENTS NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 304 – FURNITURE PRODUCT NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2010) IWK 306 – FIBRE AND LIGNOCELLULOSIC COMPOSITES APR MAY 2010. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2009) IWK 307 – ADVANCED PAPER TECHNOLOGY –INSTRUMENTAL ANALYSIS OF PULP AND PAPER NOV 2009. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1997) EBB 212-4 - BAHAN MENTAH DAN SERAMIK STRUKTUR APRIL 1997. [Teaching Resource]

Poh, B. T. and Lamaming, J. and Tay, G. S. (2014) Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend Based Pressure-Sensitive Adhesive. Journal of Coatings, 2014 (369352). pp. 1-6. ISSN 2356-7236

Poh, B. T. and Lamaming, J. and Tay, G. S. (2013) Dependence of Adhesion Properties on Blend Ratio of Ethylene-Propylene-Diene Rubber/Standard Malaysian Rubber Blend Adhesive. Journal of Coatings, 2013 (383276). pp. 1-6. ISSN 2356-7236

Poh, B. T. and Lamaming, Junidah (2013) Effect of Testing Rate on Adhesion Properties of Acrylonitrile-Butadiene Rubber/Standard Malaysian Rubber Blend-Based Pressure-Sensitive Adhesive. Journal of Coatings, 2013 (519416). pp. 1-6. ISSN 2356-7236

Poh, B. T. and Teh, Y. Y. (2014) Dependence of Adhesion Property of Epoxidized Natural Rubber (ENR 25)/Ethylene-Propylene-Diene Rubber Blend Adhesives Crosslinked by Benzoyl Peroxide. Journal of Coatings, 2014 (526369). pp. 1-7. ISSN 2356-7236

Poh , Beng Teik (2016) Viscoelastic,compatibility and morphological study of rubber adhesives. Technical Report. Universiti Sains Malaysia.

Ponnusamy, Rajeswary (2009) Synthesis And Characterization Of Chlorine-Free Polycyclotriphosphazene As Adhesive For Glass. Masters thesis, Universiti Sains Malaysia.

Pooja, Singh (2014) Effect Of White Rot Fungi Variation On The Biopulping Of Oil Palm Trunk. PhD thesis, Universiti Sains Malaysia.

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 102 – Biology For Technologists April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 203 - Bioanalysis 1 November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 204 – Bioanalysis II April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 211 - Bioanalysis II April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 302 – Bioreactor Operation November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBG 303 – DNA & Metabolite Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBK 201 – Fundamentals Of Bioprocess Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IBK 201 – Fundamentals of Bioprocess Technology November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IBK 212 – Renewable Biomass April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEG 101 – Introduction To Environmental Science November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEG 102 – Introduction To Environmental Technology April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IEK 101 – Chemical Process Calculations June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IEK 101 – Chemical Process Calculations November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 101 – Chemical Process Calculations November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 105 – Treatment & Management Of Solid Waste April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 107 - Thermodynamics April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 108 – Process Fluid Mechanics April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IEK 108 – Process Fluid Mechanics June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 205 – Air Pollution Control Technology April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 205 – Air Pollution Control Technology April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 211 – Equipment Design For Water Treatment April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 211 – Equipment Design For Water Treatment April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 212 – Process Heat Transfer June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 212 – Process Heat Transfer November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 213 – Mass Transfer & Separation Processes April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 213 – Mass Transfer & Separation Processes April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IEK 213 – Mass Transfer & Separation Processes June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 215 – Environmental, Safety & Health Legislation April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 215 – Environmental, Safety & Health Legislation April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IEK 306 – Treatment & Management Of Scheduled Waste June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 306 – Treatment & Management Of Scheduled Waste November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IEK 306 – Treatment and Management of Scheduled Waste November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IEK 307 – NOISE AND VIBRATION CONTROL TECHNOLOGY NOVEMBER 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 307 – Noise & Vibration Control Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IEK 308 – Industrial Wastewater Treatment Plant Design November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 308 – Industrial Wastewater Treatment Plant Design November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 309 - Chemodynamics April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 309 - Chemodynamics April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IEK 314 – Environmental Audit November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 314 – Environmental Audit November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 317 – Environmental Management April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 317 – Environmental Management April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 103 – Food Chemistry April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 103 – Food Chemistry April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 203 – Chemical Analysis Of Food November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IMG 203 – Chemical Analysis of Food November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 204 – Instrumental Analysis Of Food April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IMG 211 – Food Microbiology I November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 211 – Food Microbiology I November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 222 – Food Microbiology II April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 222- Food Microbiology II April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 405 – Food Packaging November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 411 – Quality Management Of Food & Sensory Evaluation November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IMK 103 - Introduction to Food Science and Technology November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 103 – Introduction To Food Science & Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 104 - Nutrition April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IMK 104 - Nutrition April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 105 - Biochemistry November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IMK 209 – Physical Properties of Food November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 404 – Food Product Development November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 407 – Food Safety April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IMK 407 – Food Safety April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 407 – Food Safety June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 421 – Primary Products Technology June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IMK 421 – Primary Products Technology November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 421 – Primary Products Technology November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IUK 107 – Chemistry For Technologist November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 107 – Chemistry For Technologist November 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IUK 191 – Mathematics I June 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 208 – Experimental Design With Computer Aapplications June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 208 – Experimental Design With Computer Applications April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 291 – Matematik II April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IUK 291 – Mathematics II April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 303 – Industrial Waste Management April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IUK 303 – Industrial Waste Management April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 304 – Industrial Quality Management April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IUK 304 – Industrial Quality Management April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IWK 100 – Bioresource As Industrial Raw Materials November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 103 – Pulp Preparation and Paper Recycling April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 103 – Pulp Production & Paper Recycling April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 105 – Bio-Resource Based Products April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 105 – Bio-resource Based Products April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IWK 201 – Raw Materials & Coatings Chemistry November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 204 – Bio-Resource, Paper & Coating Product Development April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 204 – Bio-resource, Paper And Coatings Product Development April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 205 – Chemical Additives & Paper Properties April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 205 – Paper Properties And Additives April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IWK 301 – Coatings Process & Equipments November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 302 – Wood Engineering April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 302 – Wood Engineering April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2009) IWK 304 – Furniture Product November 2009. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 305 – Advanced Technology OF Coatings April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 305 – Advanced Technology of Coatings April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 306 – Fibre And Lignocellulosic Composites April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2011) IWK 306 – Fibres & Lignocellulosic Composites April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, ppti (2011) IUK 208 – Experimental Design With Computer Applications April-May 2011. [Teaching Resource]

Pusat Pengajian Teknologi Industri, ppti (2010) IWK 101 - Principles Of Coatings Technology April-May 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IEK 213 – Mass Transfer & Separation Proceses June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMG 204 – Instrumental Analysis Of Food June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 103 – Introduction To Food Science & Technology June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IMK 209 – Physical Properties Of Food June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IUK 291 – Mathematics II June 2010. [Teaching Resource]

Pusat Pengajian Teknologi Industri, PPTI (2010) IWK 302 – Wood Engineering June 2010. [Teaching Resource]

Puspanadan, Soopna A/p (2021) Application Of Selected Marine Microalgae In Thermoplastic Starch Production. PhD thesis, Universiti Sains Malaysia..

Putra, Syed Zhafer Firdaus Syed (2011) Kesan Resin Pemelekat Terhadap Sifat-Sifat Perekat Untuk Getah Asli Terepoksida. Masters thesis, Universiti Sains Malaysia.

ppka, PUSAT PENGAJIAN KEJURUTERAAN AWAM (1998) EAJ 444-4 - STRUKTUR TANAH DAN PEMBAIKAN TAPAK OGOS-SEPT 1998. [Teaching Resource]

ppkbsm, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1989) EBS 212 - PEMPROSESAN MINERAL I JUN 1989. [Teaching Resource]

ppkbsm, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1988) EBS 212 - PEMPROSESAN MINERAL I NOV 1988. [Teaching Resource]

ppkbsm, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1993) EBS 212-3 - PEMPROSESAN MINERAL I APRIL 1993. [Teaching Resource]

ppkbsm, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1995) EBS 212-3 - PENGENALAN KEPADA PEMPROSESAN MINERAL OKT-NOV 1995. [Teaching Resource]

ppkbsm, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (1996) EBS 212-3 - PENGENALAN KEPADA PEMPROSESAN MINERAL OKT-NOV 1996. [Teaching Resource]

R

Radzi, Hilma Aini Md (2020) Incorporation Of Banana Peel Fiber In Jelly As A Functional Food Precursor. Project Report. Universiti Sains Malaysia. (Submitted)

Rafi, Najihah Mohd (2020) Effects Of Glucono-Delta-Lactone (Gdl) On Pasting, Rheological And Textural Properties Of Waxy Rice Starch. Project Report. Universiti Sains Malaysia. (Submitted)

Rahman, Khairul Hafizuddin Abdul (2017) Effect Of Cellulosic Material From Oil Palm Empty Fruit Bunches (Opefb) On The Reinforcement Properties Of Recycled Paper. Masters thesis, Universiti Sains Malaysia.

Rahman, Nurulhasanah Abdul (2022) Policy Transfer In Critical Perspective: The Case Of Malaysia My Second Home Programme. PhD thesis, Perpustakaan Hamzah Sendut.

Rahman, Rosmiza Abd (2020) The Use Of Aquafaba, Plant Protein Isolate And Soy Lecithin To Replace Egg In Kuih Bahulu. Project Report. Universiti Sains Malaysia. (Submitted)

Ramadhan, Kurnia (2012) Physicochemical And Sensory Properties Of Surimi-Like Material From Duck Meat And Its Application In Burger. Masters thesis, Universiti Sains Malaysia.

Ramli, Nur Azhani ‘Atifah (2017) Palm Oil Mill Decanter Cake As Soil Conditioner: A Study On Kailan (Brassica Oleracea Var. Alboglabra). Masters thesis, Universiti Sains Malaysia.

Ramli, Rafidah Aida (2009) Physicochemical characteristics of calcium-treated jackfruit (artocarpus heterophyllus) pulps during chilled storage. PhD thesis, Universiti Sains Malaysia.

Ramli, Rozi Nuraika (2021) Screening And Characterization Of Starch Produced From Marine Microalgae Klebsormidium Flaccidum Gn-2. Masters thesis, Perpustakaan Hamzah Sendut.

Ramli, Saadiah (2020) Enzymatic Hydrolysis And Yeast Fermentation Of Okara. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Ramli, Saadiah (2020) Enzymatic Hydrolysis And Yeast Fermentation Of Okara. Other. Universiti Sains Malaysia. (Submitted)

Rashid, Nor Syahirah Abd (2020) Plant-Based Milk As An Alternative To Dairy Milk - The Challenges And Way Forward. Project Report. Universiti Sains Malaysia. (Submitted)

Rashid, Rinani Shima Abd. (2011) Enzymatic Production Of Sago Starch Oligosaccharides And Their Fermentation By Lactobacillus SPP. Masters thesis, Universiti Sains Malaysia.

Rawi, Nurul Fazita Mohammad (2010) Properties Of Hybrid Plywood From Oil Palm Trunk (OPT) Veneer And Empty Fruit Bunches (EFB) Mat. Masters thesis, Universiti Sains Malaysia.

Razak, Nadhilah Muhammad (2018) Characterization And Properties Of Carboxymethyl Celluloses – Oil Palm Empty Fruit Bunch Hemicelluloses Blend And Nanocomposite Films. Masters thesis, Universiti Sains Malaysia.

Razali, Yasmin Syafikah (2018) Acetic And Butyric Acids From Fermented Leachate By Various Extraction Methods : Optimization And Recovery Studies. Masters thesis, Universiti Sains Malaysia.

Redza, Nur Ezzreen Zafhrina Mohamad (2020) Fermentation And Purification Of Lipase By Burkholderia Metallica Using Column Reactor. Other. Universiti Sains Malaysia. (Submitted)

Romli, Muhammad Hazim (2020) The Effects Of Figs As Sugar Substitute On Physicochemical Properties Of Soymilk Ice Cream. Project Report. Universiti Sains Malaysia. (Submitted)

Romli, Siti Rashima (2015) Effects Of Different Gelling Agents And Puree Content In The Preparation Of Red Pitaya Fruits (Hylocereus Polyrhizus) Gummy Candy. Masters thesis, Perpustakaan Hamzah Sendut.

Romli, Siti Rashima (2023) Effects Of Pineapple Consumptions On Sensory Perceptions, Somatosensation And Taste Threshold. PhD thesis, Perpustakaan Hamzah Sendut.

Roslan, Rohaizu (2011) Penghasilan selulosa fosfat daripada tandan buah kelapa sawit kosong (OPEFB) dan pengoptimuman proses dengan menggunakan Kaedah sambutan permukaan (RSM). Masters thesis, Universiti Sains Malaysia.

Ruo, Ping Ang and Leong, Sin Teoh and Mooi, Kwai Chana and Miswan, Noorizan and Boon, Yin Khoo (2016) Comparing the expression of human DNA topoisomerase I in KM71H and X33 strains of Pichia pastoris. Electronic Journal of Biotechnology, 21. pp. 9-17. ISSN 0717-3458

Ruri , Aditya Sari (2011) Development Of Betacyanin Pigment Extract And Microencapsulated Powder From Red Pitaya Fruit (Hylocereus Polyrhizus). Masters thesis, Universiti Sains Malaysia.

S

S., Vigneswari and H. P. S., Abdul Khalil and A. A., Amirul (2015) Designing of Collagen Based Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) Scaffolds for Tissue Engineering. International Journal of Polymer Science, 2015 (731690). pp. 1-10. ISSN 1687-9422

Saari, Norhafizah (2012) Effect Of Particle Geometry On Properties Of Binderless Particleboard From Oil Palm (E/Aeis Guineensis) Trunk. Masters thesis, Perpustakaan Hamzah Sendut.

Saboori, Behnaz (2013) The Relationship Between Economic Growth, Energy Consumption And Trade With Environmental Degradation: The Case Study Of Five Asean Countries. PhD thesis, Universiti Sains Malaysia.

Salih, Suhair Shatti (2016) Reduction Of Escherichia Coli In Ablution, Lake And River Water Using Porcelanite. Masters thesis, Universiti Sains Malaysia.

Salim, Nurjannah (2009) Investigation On Performance Of Oil Palm Trunk As A Laminated Veneer Lumber Using Various Thermoset Adhesives. Masters thesis, Universiti Sains Malaysia.

Samaila, Kamaludeen (2022) The Effects Of Study-Summary-Quiz Based Flipped Learning Model On Pre-Service Teachers’ Ict Skills, Achievement, Engagement, And Self-Efficacy. PhD thesis, Universiti Sains Malaysia.

Samsudin, Nurul Afifah (2021) Microbial Contamination Of Dried Chillies, Chilli Pastes, And Chilli Powder Sold At Retail Market In Penang. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Sanayei, Yasaman (2012) Simultaneous Production Of Bioflocculating Agent And Treatment Of Cibacron Yellow FN-2R By Sphingomonas Paucimobilis Using Sequencing Batch Reactor. PhD thesis, Universiti Sains Malaysia.

Sanjalawe, Yousef Khader Khattar (2020) Enhanced Cloud Service Broker Selection Policy Based On Differential Evolution Algorithm. PhD thesis, Universiti Sains Malaysia.

Sarebanha, Sanaz (2014) Physical And Mechanical Properties Of Films Prepared Using Jackfruit Waste Flour And Polyvinyl Alcohol. Masters thesis, Universiti Sains Malaysia.

Sarji, Noor Liyana (2016) Accumulation Characteristics Of Centella Asiatica L. As A Potential Cd-hyperaccumulator In Soil. Masters thesis, Universiti Sains Malaysia.

Sarker, Md. Zaidul Islam (2003) Supercritical carbon dioxide fractionation of palm kernel oil and formulation of cocoa butter replacers fat. PhD thesis, Universiti Sains Malaysia.

Sarmin, Siti Noorbaini (2009) Effect Of Cold Setting Adhesives And Glue Spread On Properties Of Oil Palm Trunk Laminated Veneers. Masters thesis, Universiti Sains Malaysia.

Sarmin, Siti Noorbaini (2009) Effect of cold setting adhensives and glue spread on properties of oil palm trunk laminated veneers[T1-995]. Masters thesis, Universiti Sains Malaysia.

Saw, Sue San (2021) Physicochemical And Emulsifying Properties Of Pre-Treated Octenyl Succinic Anhydride (Osa) Sago Starch In Emulsion. Masters thesis, Perpustakaan Hamzah Sendut.

Selamat, Mohd Ezwan (2014) Particleboard Made From Modified Crosslinked Carboxymethyl Starch From Oil Palm Trunk As Bio-Adhesives. Masters thesis, Universiti Sains Malaysia.

Seow, Eng Keng (2019) Textural Properties Of Glutinous Rice Flour Gels And Dodol As Influenced By High Diastase Honey. PhD thesis, Perpustakaan Hamzah Sendut.

Sethu, Puspalatha (2006) Studies On The Formulation And Mechanical And Dynamic Properties Of Natural Rubberichloroprene Rubber Blend For Rubber Bushing Application. PhD thesis, Universiti Sains Malaysia.

Seyedreihani, Seyedeh Fatemeh (2015) Assessment Of Ulam Raja (Cosmos Caudatus) Extract As A Functional Ingredient In Beef Patty And Green Tea. PhD thesis, Universiti Sains Malaysia.

Shadi, Abdubaki Mohamed Hussen (2022) Physicochemical Treatment Of Stabilized Landfill Leachate Using Electroflotation And Iron Oxide Nanoparticles Coagulation. PhD thesis, Perpustakaan Hamzah Sendut.

Shamsudin, Nurul Athirah (2021) Effects Of Glucono-delta Lactone (Gdl) Dipping And In-pack Pasteurization Treatment On Rice Starch Noodles Properties Upon Storage. Project Report. Universiti Sains Malaysia. (Submitted)

Shareeda, Mahmood Arif Lafta Al (2022) An Efficient Framework Of Identity-based Conditional Privacy-preserving Authentication For Vehicular Ad Hoc Networks. PhD thesis, Universiti Sains Malaysia.

Shawkataly, Abdul Khalil (2015) Studies on the fundamental properties of cellulosic nanofibers of selected cultivated bamboo species. Project Report. Universiti Sains Malaysia. (Submitted)

Shee, Wei Yee (2021) Development Of Dragon Fruit Peel-based Snacks Bar. Other. Universiti Sains Malaysia. (Submitted)

Shuhada Baharuddin, Nur (2020) Lactic Acid Production From Broken Rice Via Fermentation Process. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Shunmugam, Nannthini (2016) Effect Of Essential Oils And Organic Acids On Selected Food-Borne Pathogens And Physicochemical Properties Of Shrimps. Masters thesis, Universiti Sains Malaysia.

Sidek, Siti Shafinaz Mohd (2020) Modification Of Tamarind Seed Starch With Octenyl Succinic Anhydrate (Osa) In The Production Of Mayonnaise. Project Report. Universiti Sains Malaysia. (Submitted)

Sidik, Nur Ain Rafidah Md (2020) Enzymatic-Treatment And Different Drying Conditions On Gac Aril (Momordica Cochinchinensis Spreng.) Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Silvia, Deli (2011) Production Of Cold And Hot Press Of Nigella Sativa L Oil And Meal Using Screw Press. Masters thesis, Universiti Sains Malaysia.

Sim , Sze Yin (2011) Effects Of Cryostabilizers And Cryoprotectant On Frozen Chinese Steamed Bread Dough. Masters thesis, Universiti Sains Malaysia.

Soh, Zainal Hisham Che (2013) Distributed T-Way Test Generation Strategies Using Tuple Space Approach. PhD thesis, Universiti Sains Malaysia.

Soo, Kai Wai (2017) Rubber Blend (ENR25/NBR) Based Pressure-Sensitive Adhesives. PhD thesis, Universiti Sains Malaysia.

Soon, Yong Qi (2021) Incorporation Of Enzymatically Treated Stabilised Rice Bran In Butter Cookies: A Study On Physical, Textural And Rheological Properties. Project Report. Universiti Sains Malaysia. (Submitted)

Sreedharan, Dharni Kuhan (2021) Isolation Of Lactobacillus Brevis C23 For Production Of Bacteriocin-Like Inhibitory Substance Against Food Borne Pathogen, Listeria Monocytogenes. Masters thesis, Universiti Sains Malaysia.

Su , Claire Xin-Hui (2016) Reactive Cibacron Blue Dye Wastewater Treatment Using Combined Technology Of Thermolysis And Inorganic-Organic Hybrid Polymer Coagulation-Flocculation. Masters thesis, Universiti Sains Malaysia.

Sua, Pei Ru (2017) Effect Of Polyethylene Glycol And Silica-Based Flame Retardant Materials On Properties Of Ultraviolet Curable Palm Oil Resin. Masters thesis, Universiti Sains Malaysia.

Suid, Nurul Hamiza (2014) Adhesion Properties Of Benzoly Peroxide Crosslinked Epoxidized Natural Rubber (ENR 25) - Based Pressure Sensitive Adhesives. Masters thesis, Perpustakaan Hamzah Sendut.

Sulaiman, Nurul Syuhada (2013) Evaluation Of Oil Palm Trunk Based Adhesive For Particleboard. Masters thesis, Universiti Sains Malaysia.

Sulaiman, Syazana (2016) Physico-Chemical And Functional Properties Of Syrups Derived From Oil Palm Trunk (Elaeis guineensis) SAPS Compared With Commercial Syrups. Masters thesis, Universiti Sains Malaysia.

Sulaiman, Ummi Syakina (2020) Production Of Protein Hydrolysates From Soy Okara By Rhizopus Oligosporus. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Sulaiman, Ummi Syakina (2020) Production Of Protein Hydrolysates From Soy Okara By Rhizopus Oligosporus. Other. Universiti Sains Malaysia. (Submitted)

Sulaiman, Wan Nurnadia Diyana (2020) Production Of Protein Hydrolysates From Soy Okara By Aspergillus Oryzae. Other. Universiti Sains Malaysia. (Submitted)

Surya, Indra (2002) Reinforcement Of Natural Rubber And Epoxidized Natural Rubbers With Amine-Treated Silica. Masters thesis, Universiti Sains Malaysia.

T

T Mohd Yusof, Tengku Nadiah (2017) Screening Of Selected Terrestrial Plants For The Control Of Cyanobacterial Growth. Masters thesis, Universiti Sains Malaysia.

Tai, Nyok Ling (2012) Production And Characterization Of Ultraviolet Cured Palm Oil Based Resin. Masters thesis, Universiti Sains Malaysia.

Tan, Bee Hooi (2016) Characteristics Of Fish Protein Powder Prepared From Snakehead (Channa Striata) Raside On Specialised Lipid Diet. Masters thesis, Universiti Sains Malaysia.

Tan, Chiew Ming (1994) Modifikasi Hidrotermal Terhadap Sifat-Sifat Fiziko-Kimia Tepung Beras. Masters thesis, Universiti Sains Malaysia.

Tan, Jie Yi (2021) Survival And Penetration Of Salmonella Spp. Inoculated On Washed And Unwashed Eggshell Stored At Different Temperatures. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Kean Meng (2023) Co2 Biofixation And Carbohydrate Biosynthesis By Locally Isolated Acidophilic Microalgae For Biobutanol Production Through Simultaneous Saccharification And Fermentation. PhD thesis, Universiti Sains Malaysia.

Tan, Kwan Liang (2020) The Effect Of Different Pineapple Ripeness On The Physicochemical, Microbiological Properties Of Fermented Kefir Drink. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Wei Ting (2020) Evaluation Of Rice Husk Powder As An Anticaking Agent In Coffee Powder. Project Report. Universiti Sains Malaysia. (Submitted)

Tan, Zi Ni (2016) Physicochemical Properties And Prebiotic Potential Of Native, Resistant And Hcl-Resistant Starches From Sago (Metroxylon Sagu). PhD thesis, Universiti Sains Malaysia.

Tan, C. S. and Teng, T.T. and Hakimi, Mahamad and Lim, C. P. and Pang, F. M. and Seng, C. E. (2004) A New Viscosity Equation For Bin Aqueous Solutions. In: Proceedings of the 18th Symposium of Malaysian Chemical Engineers (SOMCHE 2004), 2004.

Tan Sali, Afiza (2009) Kesan suhu fermentasi, jenis ikan dan kepekatan garam terhadap sifat fizikokimia budu [T1-995]. Masters thesis, Universiti Sains Malaysia.

Tang, Chiau Yong (2018) Performance Of Integrated Energy Recovery For Split Unit Air-Conditioning System In Hot And Humid Environment. Masters thesis, Universiti Sains Malaysia.

Tang, Hock Wei (2022) Characterisation Of Bacteriocin-Like Inhibitory Substances Derived From Locally Isolated Lactobacillus Paracasei Fd1 And Its Synergic Impact With Antibiotics. Masters thesis, Universiti Sains Malaysia.

Tay, Kai Xin (2018) The Determinants Of Long And Medium Haul International Tourists’ Length Of Stay In Malaysia. PhD thesis, Universiti Sains Malaysia.

Tay , Guan Seng (2013) Thermoplastic composites prepared from non-woven fibers mat. Technical Report. Universiti Sains Malaysia.

Teh, Sue Siang (2010) Bioactivity Of Soymilk Fermented By Lactic Acid Bacteria Immobalized On Agrowastes. Masters thesis, Universiti Sains Malaysia.

Teo, Chin Heng (1992) Kajian Resonans Magnet Nukleus Denyut Dan Kalorimetri Penskanan Diferensial Ke Atas Retrogradasi Kanji. Masters thesis, Perpustakaan Hamzah Sendut.

Teoh, Qi Yin (2021) Evaluation Of Direct Ozone Depuration On Shelf-Life Of Fresh Tropical Oysters (Crassostrea Iredalei). Project Report. Universiti Sains Malaysia. (Submitted)

Tham, Mun Wai (2022) Effect Of Maleic Anhydride Grafting On Properties Of Bamboo And Jute Fibres Woven Fabric Reinforced Polylactic Acid Composites. PhD thesis, Universiti Sains Malaysia.

Tie, Adrina Pei Lang (2004) Physico-Chemical Properties Of Starch In Sago Palm (Metroxylon Sagu) At Different Growth Stages. Masters thesis, USM.

Tina Nurkhoeriyati, Tina Nurkhoeriyati and Nurul Huda, Nurul Huda and Ahmad, Ruzita (2010) Perkembangan Terbaru Teknologi Surimi. In: Seminar Sehari Pengembangan Perikanan Dalam Menghadapi Asean Community 2015., January 2010, Sekolah Tinggi Kelautan Dan Perikanan Indonesia Indonesia Jalan Tirta No. 1 C Komp.Kantor Bupati Deli Serdang Lubuk Pakam Sumatera Utara..

Ting Lim, Hui (2020) Effects Of A Lactobacilli Probiotic On Survival And Mobility Of Female Drosophila Melanogaster With Alzheimer’s Disease. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Torkamani, Amirehsan (2018) Impact Of Pressurized Extraction And Electrohydrodynamic Encapsulation Methods On Antioxidative Properties Of Momordica Charantia Fruit Extract. PhD thesis, Universiti Sains Malaysia.

Tuwayrish S, Alanazi Sultan (2023) Adopting Theories-Based Model Of Information Security Compliance Behaviour For Healthcare Employees In Kingdom Of Saudi Arabia. PhD thesis, Universiti Sains Malaysia.

U

U, Uthumporn, and D.L, Laila, and M.S, Rabeta, and H, Aida, and A.S, Ruri, (2016) Effects of Different Cooking Methods on the Physico-Chemical and Quality Attributes of Eggplants. International Journal on Advanced Science, Engineering and Information Technology , 6 (4). pp. 460-464. ISSN 2088-5334

Umar, Mohammad Faisal (2022) Bioremediation Of Benzene And Its Derivatives Producing Renewable Energy Through Benthic Microbial Fuel Cells. PhD thesis, Perpustakaan Hamzah Sendut.

V

Varastegani, Boshra (2014) The Preparation And Characterization Of Papa Ya Slices And Flour And The Potential Of Flour In Cookie Preparation. Masters thesis, Perpustakaan Hamzah Sendut.

Vasanti Nair, Chanderan K. and Chee , C. Seow and Sulebele, Guruprasad A. (1996) Effects of frying parameters on physical changes of tapioca chips during deep-fat frying. International Journal of Food Science & Technology, 31 (3). pp. 249-256. ISSN 0950-5423

Veerapan Pakerisamy, P. Jayanthee (2015) Kesan Kaedah Inkuiri Atas Talian Secara Kolaboratif Bersama Perancahan Penghujahan Terhadap Penaakulan Dan Kualiti Hujah Dalam Kalangan Pelajar Sejarah Tingkatan 4. PhD thesis, Universiti Sains Malaysia.

Veeriah, Harivaindaran (2015) Effect Of Superheated Steam (Shs) Pre-Treatment On Quality Of Fish Oil From Catfish (C/Arias Batrachus). Masters thesis, Perpustakaan Hamzah Sendut.

Vinnie, Ang Jia Wen (2020) Comparison On Composition And Physical Properties Of Dried Locust (Locusta Migratoria Manilensis) Powder From Different Sources. Project Report. Universiti Sains Malaysia. (Submitted)

W

Wahab, Siti Nur Aqilah Binti Abdul (2020) Biosynthesis Of Poly(3-Hydroxybutyrate) By Cupriaviadus Necator Dsm 428 Utilizing Waste Date Fruits As A Carbon Source. Other. Universiti Sains Malaysia. (Submitted)

Wahid, Zulqarnain (2016) Enhancement Of Bamboo Nanofiller In Pineapple Leaf Fiber Reinforced Polyester Composites. Masters thesis, Perpustakaan Hamzah Sendut.

Wahid, Zulqarnain (2016) Enhancement Of Bamboo Nanofiller In Pineapple Leaf Fiber Reinforced Polyester Composites. Masters thesis, Perpustakaan Hamzah Sendut.

Wan Abdullah, Wan Nadiah (2017) Alcohol in foods: Detection and halal limits. Technical Report. Universiti Sains Malaysia.

Wan Othman, Wan Nornadirah (2014) Characterization Of Oil Palm Shell Nano Filler In Hybrid Kenaf/Coconut Fibres Reinforced Polyester Composites. Masters thesis, Perpustakaan Hamzah Sendut.

Wan Othman, Wan Nornadirah (2014) Characterization Of Oil Palm Shell Nano Filler In Hybrid Kenaf/Coconut Fibres Reinforced Polyester Composites. Masters thesis, Universiti Sains Malaysia.

Wan Sharuddin, Wan Nursyazreen Dalila (2016) Palm Kernel Testa Removal And Its Effects On Extracted Oil Quality. Masters thesis, Universiti Sains Malaysia.

Wang, Jiao (2017) Optimization Of Rhodamine B Dye Removal From Aqueous Solutions By Liquid-Liquid Extraction. Masters thesis, Universiti Sains Malaysia.

Wei, Yee Min (2023) Antibacterial Effects Of Phomopsidione Isolated From Diaporthe Fraxini Against Methicillin-resistant Staphylococcus Aureus (Mrsa) With Gene Expression And Metabolomics Profiling. Masters thesis, Universiti Sains Malaysia.

Wen Chian, Liew (2020) Microbial Production Of Polyhydroxybutyrate (Phb) By Burkholderia Cepacia Bpt1213 From Different Carbon Sources And Its Fermentation Kinetics. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Wijekoon, Marasinghe Mudiyanselage Jeevani Osadee (2011) Chemical composition and biological properties of etlingera elatior jack. (torch ginger) inflorescence. Masters thesis, Universiti Sains Malaysia.

Wong, Kean Seng (2020) Development Of Edible Oleogel For Capsaicin Delivery. Project Report. Universiti Sains Malaysia. (Submitted)

Wong, Lee Min (2012) Physico-Chemical Properties Of Sponge Cake Made From Wheat Flour Incorporated With Mango (Mangifera Indica Var. Chokanan) Pulp And Peel Flour. Masters thesis, Universiti Sains Malaysia.

Wong , Chyn Boon (2016) Development Of Lactobacillus Plantarum Antibacterial Proteins As Bacteriocides Against Staphylococcus Aureus. PhD thesis, Universiti Sains Malaysia.

Y

Yahya, Esam Bashir Abdulsalam (2022) Preparation And Properties Of Cinnamon Essential Oil Loaded Antibacterial Nanocellulose/chitosan Aerogels For Biomedical Applications. PhD thesis, Universiti Sains Malaysia.

Yahya, Mohd Khairul Azri (2012) Effects of storage time and tree height on sugar and starch compositions of oil palm trunk biomass. Masters thesis, Universiti Sains Malaysia..

Yan Leong, Kah (2020) Physical Extraction Of Flagellavia Ultrasonication From Bacillus Subtilis 168 With Various Control Elements. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Yang, Wen Huey Physicochemical Properties Of Pre-Treated Cuttlebone Powder And Its Potential As An Alternative Calcium Source. Project Report. Universiti Sains Malaysia. (Submitted)

Yau, Xiang Ming (2020) Development Of Sesame Oil-Based Non-Dairy Creamer. Project Report. Universiti Sains Malaysia. (Submitted)

Yeap, Kiew Lee (2014) Preparation, Characterization And Application Of Hybrid Polymer In Dye Wastewater Treatment. Masters thesis, Universiti Sains Malaysia.

Yeo , Siok Koon (2012) Bioconversion Of Isoflavones In Synbiotic-Soymilk Using Physical Treatments (Ultrasonication, Electroporation And Ultraviolet) On Lactobacilli And Bifidobacteria. PhD thesis, Universiti Sains Malaysia.

Yeoh, Shin Yong (2022) Development Of Hydrocolloids-Coated Noodles For Enhanced Salt Release In The Mouth. PhD thesis, Perpustakaan Hamzah Sendut.

Yeong, Kah Chuen (2020) Determination Of The Effect Of Ph On Microalagal Growth And Protein Content In Locally Isolated Tetraselmis Suecica And Scenedesmus Parvus. Other. Universiti Sains Malaysia. (Submitted)

Yhaya, Mohd Firdaus (2016) Study of Nanocellulose Fibrils. Derived from Bioresource Waste: Reduction of Agglomeration and Cross-linking. Project Report. Universiti Sains Malaysia. (Submitted)

Ying, Jocelynn Kee Xiao (2022) Design Optimization And Characterization Of White Light For Led Street Light Application. PhD thesis, Universiti Sains Malaysia.

Yong, Cheng Chung (2016) Effects Of Protein-Rich Fraction From Lactobacillus Plantarum Usm8613 Against Dermal Staphylococcus Aureus. PhD thesis, Universiti Sains Malaysia.

Yong, Chin Hong (2022) Adulteration Detection Of Stingless Bee Honey Using Untargeted 1h-Nmr Metabolomics In Addressing The Limitation Of Stable Carbon Isotope Ratio Analysis. Masters thesis, Universiti Sains Malaysia.

Yunus, Muhamad Nurul Hisyam (2023) Ergonomic Assessment Of Firefighting Activities And Musculoskeletal Disorders Using Inertial Measurement Unit Motion Capture Method. Masters thesis, Universiti Sains Malaysia.

Yusof, Ahmad Sauffi (2019) Study Of Cu-Doped Zno Films Deposited On Different Substrates Using Magnetron Sputtering. Masters thesis, Universiti Sains Malaysia.

Yusof, Nur Firdaus Mohamed (2010) Effect Of Storage Time In Different Humidity Conditions On Mechanical And Physical Properties Of Hybrid Medium Density Fibreboard (MDF). Masters thesis, Universiti Sains Malaysia.

Yusoff, Rosnah Muhd (2011) Pulpability Of Oil Palm Empty Fruit Bunch Via Alkaline Peroxide Treatment. Masters thesis, Universiti Sains Malaysia.

Yussof, Nor Shariffa (2010) Enzymatic Hydrolysis Of Native Granular And Modified Starch Below Gelatinization Temperature. Masters thesis, Universiti Sains Malaysia.

Yussof, Nor Shariffa (2010) Enzymatic Hydrolysis Of Native Granular And Modified Starch Below Gelatinization Temperature. Masters thesis, Universiti Sains Malaysia.

Z

Zain, Noorul Wahidah Mat (2011) Physicochemical Properties Of Starch From Sago (Metroxylon Sagu) Palm Grown In Mineral Soil At Different Growth Stages. Masters thesis, Universiti Sains Malaysia.

Zain, Nur Syafiqah Mat (2023) Aquaculture Production And Employee Wellness Between Brackish Water And Freshwater Farmers In Penang State. Masters thesis, Universiti Sains Malaysia.

Zainal, Nahrul Hayawin (2011) Biodegradation of various oil palm fibre waste via vermicomposting. Masters thesis, Universiti Sains Malaysia.

Zainal Abidin, Nur Amirah (2021) Partial Substitution Of Wheat Flour With Locust (Locusta Migratoria) Powder In White Salted Noodle Incorporated With Spi And Mtg With Incomplete Information: An Experimental Study. Project Report. Pusat Pengajian Teknologi Industri. (Submitted)

Zainal Abidin, Nur Farehah (2017) Reduction Of Ammoniacal Nitrogen In Semiconductor Wastewater Using Sequence Batch Reactor By Vermiwash-Isolated Bacteria. Masters thesis, Universiti Sains Malaysia.

Zakaria Katrawi, Anwar Hussein (2022) Enhanced Late-Straggler Algorithm With On-Demand Etl For Big Data Retrieval. PhD thesis, Perpustakaan Hamzah Sendut.

Zarini, An Nabil (2016) Using Fruit Enzymes For Extraction And Characterisation Of Collagen From Black Tilapia (Oreochromis Niloticus) Skin. Masters thesis, Universiti Sains Malaysia.

Zikri, Wan Zulaikha Adrina Wan Ahmad (2020) Glycemic Index Values Of Instant Multigrain Beverage: Current Knowledge And Future Prospects. Project Report. Universiti Sains Malaysia. (Submitted)

Zubaidi, Shahad Khaldoon Abdulameer Al (2021) The Short Term Study Of Polylactic Acid Microplastics Uptake By Eudrilus Eugeniae. Masters thesis, Universiti Sains Malaysia.

Zuknik, Mark Harris (2016) Development Of A Novel Palm Kernel Testa Removal Method And Characterization Of Its Effects. PhD thesis, Universiti Sains Malaysia.

Zulfigar, Siti Balqis (2019) Extraction, Purification And Characterization Of Artocarpus Altilis Latex Protease As A Fibrino(Geno)lytic Agent. PhD thesis, Universiti Sains Malaysia..

Zulfigar,, Siti Balqis (2012) Purification And Characterization Of Protease From Artocarpus Integer Leaf. Masters thesis, Universiti Sains Malaysia.

Zulkifli, Nur Zafirah (2019) Stable Isotopes Analyses Of Carbon-13 And Nitrogen-15 In Kelantan River Sediments. Masters thesis, Universiti Sains Malaysia.

Zulkifli, Zarina (2021) E-Government And Trust In Public Administration From The Perspective Of E-Notifikasi Users. PhD thesis, Perpustakaan Hamzah Sendut.

Zulkipli, Ayu Shazwani (2021) Nutritional Composition, Toxicity Study Of Squid And Cuttlefish Ink Hydrolysates And Flavour Improvement Using Maillard Reaction. Masters thesis, Universiti Sains Malaysia.

Zzaman, Wahidu (2015) Effect Of Superheated Steam Roasting On Quality Characteristics Of Cocoa Beans (Theobroma Cacao L.). PhD thesis, Universiti Sains Malaysia.

‘Asri, Norsyahira (2020) Microbiological Contamination Of Kerabu Dishes Sold At Cafes And Food Stalls In Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia. (Submitted)

This list was generated on Thu Nov 14 04:52:51 2024 +08.
Share