| |||||||||
| |||||||||
Items where Subject is "T Technology > TJ Mechanical engineering and machinery"
Group by: Creators | Item Type Number of items at this level: 617. AAaron Ting, Zai Chiun (2018) Development Of Fuel Consumption Map Of A Myvi Engine Running On A Mixture Of RON 95 And RON 97 Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ab Azid, Nor Azianti (2018) Conceptual Analysis Of Total Productive Maintenance (TPM) And Reliability Centered Maintenance (RCM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abd Aziz, Muhamad Syaiful Akmal (2018) Application Of Internet Of Things On Temperature Measuring System On Wafer Furnace Sintering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abd Ghani, Muhammad Muzakkir (2022) Micro Pitting And Wear Assessment Of Spur Gear. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abd Rahman, Mohammad Fairuz (2018) Characteristics Study Of EFB Briquettes And Its Potential Use As Dual Fuel In CVCC. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Aziz, Siti Nuha Majiddah (2022) Design And Fabrication Of Flexible Strain Sensor For Food Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Jalal, Mohamad Soffian (2000) Analisis Bulatan Mohr Menggunakan Perisian MathCAD. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Malek, Noor Atikah (2018) Investigation On Hybrid Geometric Modelling Construction For Injection Mould Using CAD System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With Ti02 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With TiO2 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Mutalib, Nurul Rafika Amira (2022) Analysis Of Grease Degradation Under Elastohydrodynamic Lubricant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Rahim, Nur Adibah (2018) A Single Unit Concept And Design Of A High Maneuverability Mobile Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Rashid, Nordalilah (2000) Generation Of Vortices In Air Flow Throuh Plates In Tandem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Razak, Mohamad Noorhazim (2022) Study On Different Parameters Of An Inertia-Type Piezoelectric Actuator In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdul Wahab, Mohammad Hafeez (2017) Development Of Customer Friendly Method For Measuring Real Fuel Consumption Of Small Passenger Car. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdullah, Abdul Halim (2005) Power Generation From Biomass Fluidized Bed System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abdullah, Umar Mujahid (2019) Effects Of Nanoparticles Concentration To Transport Properties Of Nanofluids Using Molecular Dynamics Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Abdullah@Muhamad, Maswandy (2005) FEA MEMS Packaging For Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Abu Bakar, Md. Nazri (2005) Design And Fabrication Of Modular Fixture To Accommodate Flexible Assembly Systems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Adman, Amirul Akil (2019) The Effects Of Material Properties On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Adnan, Muhammad Zikri (2019) Design Optimization Using Numerical Simulation And Experimental Of Wind Energy Harvester Unit From Exhaust Fan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Adnan, Nahwan Hussaini (2017) Experimental Study Of An Inlet Guide Vane Design (IGVD) For Emulsified Biofuel Application In Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Adrian Lim, Zan Kuang (2022) Characterization Of Natural Resin And Synthetic Resin In Fiber Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Agusrianto, Yohn Hendra (2005) Design Of An Engine Using Hydrogen Fuel Derived From Biomass Gasification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad, Mohd Zuhair (2022) Analysis Of Martensitic Transformation And Bending Deformation Of NiTi Arch Wire Against Different Deflection And Temperature Range. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad, Musa (2022) Deformation Behaviour Of Metallic Cellular Structure Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad, Wan Mohd Alimie Wan (2017) Simulation Study Of Heat Exchanger Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ahmad Khaizi, Aini Syazwina (2022) A Pilot Study Of Heat Stress Risk Evaluation While Wearing Personal Protective Equipment Suit In A Tropical Climate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad Nadzri, Faiz Farhan (2022) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad Nordin, Ahmad Faris (2022) Lean Premixed Pre-Vaporized Combustion In A Swirl Stabilized Liquid Fuel Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ahmad Sobri, Ammar Solehi (2018) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig Humidity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Akashah, Akmal Rafiq (2018) Effectiveness Of Variable Stent Designs For Treatment Of Renal Artery Aneurysm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Alauden, Muhammad Rafiq (2022) Characteristics Study Of Emulsified Biofuel And Egg Yolk Oil (EBEYO) Properties And Its Performance In Compression-Ignition Engine Using New Formulated Surfactants And Composition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Alexander, Tan Wai Teng (2019) Effect Of Error Augmentation Training Strategy On Engagement In Rehabilitation Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ameen, Ahmadul and Mahmud, Khizir (2005) Desiccant Dehumidification With Hydronic Radiant Cooling System For Air-Conditioning Applicants In Humid Tropical Climates. Ashrae Transactions , 111 (2). pp. 225-237. Amin, Ahmad Bulya Md (2019) Pedal Exercise Machine For Physical Rehabilitation Of Stroke Patients. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Amirnudin, Saiful Nizal (2005) Design And Fabrication Manual Robot Specifically For Robocon 2005 Contest. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Amrik Singh, Dalbir Singh Banwait (2018) Development Of Lower Limb Stroke Rehabilitation Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ang, Cheau Hui (2022) Deformation And Stress Analysis Of 3D Printed Spanner Wrench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Angles, Liew Xin Juan (2017) Design And Development Of Basic Learning Modules For Open-Source Jaamsim Discrete Event Simulation Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Anuar, Muhamad Shafiq (2022) Design And Development Of Internet Of Things (IoT) Based System For Monitoring Energy Consumption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Anuar, Muhammad Akmal Adib (2019) Control Of Welding Robot Using Drone With Autopilot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Arbain, Azizi (2018) Measurement And Management Of Energy Usage In School Of Mechanical Engineering USM. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Arumugam, Sagaathevan (2019) Development Of Sonic Air Flow Meter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Awang, Muhamad Haidar (2019) Numerical Study Of Plate Heat Exchanger For Erema Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Awang Mansor, Muhammad Adib Haikal (2022) Analysis Of Design Of An Intervention Oil Palm Sickle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azam, Mohd Azizul (2000) Mampatan Beban Paksi Keatas Tiub Segienam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azaman, Amirul Fahmi (2022) The Effect Of Hydrogen Diffusion In Orthodontic NiTi Archwire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azhan, Anis Masturina (2022) Reduce Manufacturing Lead Time Through PDCA And Waste Elimination In Metal Casting Company: A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azhar, Mohamad Amiruddin (2022) 1D Multigrid Solver For Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azhar, Muhammad Asyraf (2022) Miniature Specimen Fracture Toughness Testing: A Concise Review. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Aziz, Asyraf Hasif (2018) Numerical Analysis Of Ultra-Fine Package Assembly With SAC305-TiO2 Nano-Reinforced Lead Free Solder At Different Peak Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Aziz, Lia Dayana Abdul (2019) Total Industrial Safety Culture In Manufacturing Sector. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Aziz, Mohd Rozaiman (2000) Kajian Terhadap Beban Mampatan Paksi Ke Atas Tiub Yang Mengandungi Buih Disediakan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Aziz, Muhammad Safwan Abdul (2019) Application Of The Dynamic Vibration Absorber To Reduce The Noise And Vibration Of The Automotive Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Aziz, Muhammad Shahrullah Abdul (2017) Development Of Localised Drive Cycle Under Real Traffic Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Azman, Amirul Azim (2018) Development And Characterization Of Biomass Steam Boiler For Externally Fired Micro Gas Turbine (EFMGT) System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azman, Muhammad Aqil (2017) Construction Of Multigrid Solver For 2D Heat Conduction Problem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Azmi, Amirul Asraf (2018) Supply Chain Management And Performance At Case Study Company. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azmin, Abdul Rahman (2022) Experimental Study Of Water Based Air Conditioning System For Space Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Azreezul, Azrul Zhafran (2018) Time-Lapse Of Plant Movement Classification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) BBachok, Zuraihana (2004) An Introductory Study On Fabrication Of Piezoelectric Ceramic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Badrul Hisham, Alya Nabilah (2022) Numerical Investigations On Sprue Configuration For Multi-Cavity Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Bahaaideen, Farhad Bilal (2011) Synthesis of Electroless Ni-P-Cg (graphite)-SiC Composite Coating on Piston Rings of a Small Two Stroke Utility Engine. PhD thesis, Universiti Sains Malaysia. Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Bakar, Muhammad Haziq Abu (2017) Simulation Of Muscle Loading In Two Activities With Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Bakar, Muhammad Haziq Abu (2019) Stent Configurations And Its Effectiveness In Renal Artery Aneurysm. Masters thesis, Universiti Sains Malaysia. Bakar, Norhayati Abu (2017) Design Of Mathematical Model For Locomotion Control Of Snake-Like Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Basir, Mohd Fairdaous (2017) Study Of Punch-Die Misalignment Using Machine Vision System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Basir, Nor Afiza Abdul (2019) Quality Analysis For Defect And Defective Component Parts On Printed Circuit Board (Pcb) Using Dmaic Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Basirah, Aiman (2022) Analysis Of Micro Generator Performance From Porous Media Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Baskaran, Barathan (2017) Performance Of Compressed Air Engine Modified From Spark Ignition Engine With Cam Modification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Baskaran, Barathan (2017) Performance of compressed air engine modified from spark ignition engine with cam modification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Boey, Keen Huang (2018) A Comparison Of The Different Algorithms For Essential Tremor And Parkinson’s Disease Tremor Differentiation Based On Hand Tremor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) CCe Ku Zanggi, Che Ku Mohd Arif (2005) Finite Element Analysis Of An Actuator In MEMS Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chai, Chang Yuan (2022) Analysis Of Heat Treatment Effect On Tensile Properties Of 3D Printed Carbon Fiber Composite And Comparing Mechanical Properties On Manufacturing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chai, Jien Wei (2017) Simulation Of Blood Flow Through Mechanical Heart Valve Using Ansys Fluid Structure Interaction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chai, Tying Tying (2019) Ferroelectric Thin Film Materials Deposition By Physical Vapor Deposition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chai, Yik Zhien (2019) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chan, Chun Seng (2005) Mathematical Modeling For Upgrading Low Rank Coal To High Rank Coal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chan, Jaan Huan (2005) Pick-And-Place Mobile Autonomous Robots. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chan, Jian Siang (2022) Performance Of Combustion Chamber For Micro Gas Turbine (MGT) Application Running On Palm Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chan, Kien Wing (2005) Numerical Simulation For Free Convection In Axisymmetric Porous Medium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chandhira, Gajjhenthra Richard Raj @ (2019) Pin Transfer Of Epoxy Resin (Glycerin) On The Led Housing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chang, Fan Ru (2018) Water And Salt Water Absorption, Hygrothermal And Tribological Propertires Of Nickel Zinc Ferrite Magnetorheological Elastomers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chee, Kar Wei The Potential Of Solar Energy For Domestic And Commercial Buildings. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chek, Muhammad Asyraf Wan (2019) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Cheong, Der Hwa (2017) Design And Fabrication Of Water Level Control Valve For Acid Filling System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chia, Yong Ham (2018) The Effect Of Various Carbonization Temperature And Duration On The Food Using Microwave Food Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chiang, Han Xi (2019) Structural Analysis Of Thermoformed Electroluminescent Printed Lighting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chiang, Xiao Tong (2019) Design And Development Of A Locking Mechanism For A Gear-Based Prosthetic Knee Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chik, Nur Aishah (2018) A Study Of Integrated CAD/CAM System With CNC Desktop Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chim, Yi Shen (2017) Effect Of Twist Drill Geometry And Drilling Parameters On Thrust Force In Single-Shot Drilling Of Stack-Up Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chin, Han Chuan (2018) Performance Of A Hydraulic Ram Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chin, Jiun How (2022) Performance Comparison Of AFC-CA, AFC-GA, AFC-PSO And AFC-NN In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chong, Jia Jun (2019) Influence Of Copper Pillar Bump Structure On Flip Chip Packaging During Reflow Soldering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chong, Shin Yun (2021) Implications Of Intravascular Catheter In A Blood Vessel During Medical Treatment Using Computational Fluid Dynamics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chong, Yian Sia (2003) Simulation Of Total Heat Loss From Wet Skin Surface Of Dairy Cattles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chong, Zhi Chien (2021) Design And Analysis Of Rubber Tapping Machine Using Ansys Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Choo, Kinn (2021) Performance Comparison Of Intelligent Tuning Methods Using Pid-Afcga And Pid-Afcpso In Attenuating The Vibration Of The Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Choo, Then Xiang (2021) Optimization Of Customized Tetra-Flute Drill Reamer For A Better Hole Quality In Single Shot Drilling Of Cfrp Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chow, Hong Man (2022) Effect Of Different Biodiesel Blends On Engine Performance, Emissions And Combustion Characteristics Under Various Engine Torques And Speeds Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chu, Wee Liang (2004) Mould Filling In Electronic Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chu, Yin Yeng (2017) Finite Element Simulation Of Laser Welding Of Tailor Welded Blank On Different Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Chua, Khai Shen (2018) The Application Of The DMAIC Techniques For Business Performances Case Study For Open Defect Of Single-Sided Flexible Circuit Board. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Chuah, Siong Wei (2022) Experimental Study Of Desiccant Material Pressure Drop. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) DD'raj, Joshua (2018) Biomechanical Testing Of Hip Protectors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Darun, Hasratul Azwan (2017) Identification Of Nonlinear Characteristic Of The Rubber Mount. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Daryl, Tan Hock Ann (2017) Motion Pattern Tracking Classification In Bowling Matches. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Daud, Nurul Ain Mat (2019) Effect Of Hole Size, Sheet Thickness And Material Type To The Performance Of The Self-Clinching Fastener. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Dorai Raj, Nanthakumar (2000) Simulation On Chip Scale Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) EEunice, Wong Siaw Chui (2017) Improving The Inventory Management In A Small And Medium Enterprise (SME) - A Case Study In A Printing Firm In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ezra Tan, Yi Chyn (2022) Philosophical Tools Of Lean Six Sigma In Service Sector: Implications For Organisational Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) FFadzieli, Nur Liyana Mohamad (2017) Investigation Of Dynamic Failure Mechanism Of Kenaf Composite Using Sem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Fadzil, Mohammad Azhar (2018) The Study Of Physiochemical Properties And Spraying Characteristics Of Hybrid Biofuel For Compression Ignition (CI) Engine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Fathi, Farhana Mohamad (2017) Design Of Thermal Cautery Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Fauzan, Alwi Sharil (2003) Finite Element Analysis On Side Door Impact Beam. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Fauzi, Muhammad Fahmi Hasifi Md (2019) Experimental Performance Of Humid Air Turbine Fueled By Biomass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Foo, Mun Yee (2019) Design Improvement For Replica Trophy Using Reverse Engineering And Cnc Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Fun, Seng Phan (2019) Modelling Of Mechanical Behaviour Of Electronics Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) GGan, Zheng Ho (2019) Thermal Analysis Of Non-Newtonian Fluid Flow Over Superhydrophobic Surface. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ganesan, Devesh Raj (2022) A Predictive Classification Model For Running Injury. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ganesan, Lagunesvary (2019) Experimental Study Of Soil As Porous Medium For Evaporative Cooling. Masters thesis, Universiti Sains Malaysia. Ganesan, Raguvaran (2019) Vibration Analysis Of The Dam Physical Model Due To The Effect Of Water Spilling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ganiashan, Eesvaran (2022) Structural Integrity Investigation Of SAC305 Lead Free Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ghazali, Mohamad Hazwan Mohd (2017) Design Of Master Mask Film, Fabrication Of PDMS Mold And Fabricate Uv Led Curing Unit To Test Imprint Capability Of Roll-To-Plate Nanoimprint Lithography System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Go, How Chiang (2017) Experiment And Simulation Reflow Process Of PDMS Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Goh, Ching Pang (2017) Analysis of Large In-Plane Displacement and Strain in Rubber Using 2-D Scanner-Based Digital Image Correlation. PhD thesis, Universiti Sains Malaysia. Gorment, Mohd. Zahiri (2001) Pembangunan Sistem Penggasan Biojisim Bagi Menjana Kuasa 20 kW Untuk Kegunaan Di Kawasan Pendalaman. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Gun, Yong Yin (2022) Optimization Of 3D Printing Of Shape Memory Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Gurasekeran, Prakash (2005) Hand Arm Vibration Exposure Of The Chainsaw Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) HHabidin, Mohamad Ridzuan (2022) 3D Scanner App For New Product Development Due To Covid-19 Endemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hamdan, Muhammad Hidayat (2018) Characterization Of The Noise And Vibration Patterns Of The Vehicle HVAC System Under Various Operating Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hamid, Mohamad Idham (2022) Experimental Study Of Building Materials Made Of Waste Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hamid, Siti Nuraimi Abdul (2017) Development Of A Crack Mouth Displacement Gauge For Fracture Mechanics Specimens. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Hamidi, Muhammad Nafiz (2022) Micropitting And Wear Assessment Of Roller Bearing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hamzah, Muhammad Al Amien (2018) Development Of A Meso-Scale Combustor For Liquid Fuel Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hashim, Muhamad Hasnusi (2001) Rekabentuk Sistem Penyejukan Pengering Dengan Bantuan Sistem Penyejukan Penyerapan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hashim, Muhammad Reduan (2017) Comparison Method Of Cutting Honeycomb Core. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Hashim, Nur Amanina Ayuni (2022) Witness Simulation Of Machine Breakdowns For Small, Medium And Large Aircrafts During Turnaround Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hasim, Mohd Hasrul (2005) Effect Of Accessibility And Assembly Method To Product Or System Maintainabilty. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hasnal, Ahmad Shazzulhilmi Ahmad (2017) Simulation Of Conventional Passenger Vehicle Using Engine Map With Different Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Hassan, Mohd Nor Hakim (2010) Study On The Development Of Ceramic Cutting Tool (ZTA / ZTA-MGO) And Its Machining Performance In Slot Milling. Masters thesis, Universiti Sains Malaysia. Heng, Chai Wei (2005) Mould Filling In Electronic Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Heng, Jing (2019) Digitalization Of Operator Skill Competency By Development Of Information System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Hing, Chen Teng (2021) Effect Of Vegetable Oil On Surface Roughness During Turning Of Aisi 1020 Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Hishamiakim, Mohamad (2019) Pseudoelasticity And Cyclic Behaviours Of Nickel-Rich NiTi Shape Memory Alloy. Masters thesis, Universiti Sains Malaysia. Ho, Teik Seng (2005) Analysis Of Lift In A Hovercraft Numerical Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ho, Zhe Wei (2018) Classification Analysis Of The Badminton Five Directional Lunges. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hooi, Khey Herng (2022) Effects Of Fin Length And Fin Valley On The Performance Of Bus Duct Conductor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Hussin, Muhamad Amirul Aiman (2022) Comparative Assessment Of Air-Cooled And Water-Cooled Thermoelectric Power System “Simulation Approach”. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) H’ng, Chin Yeong (2005) Investigation Into The Performance Of A Desiccant Cooling System Combined With Chilled Ceiling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) IIbrahim, Illuni Islamiah (2018) Wear And Friction On Gimbal Sealant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ibrahim, Mohamad Hanif (2018) Environmental Control For Catfish Drying House Using Raspberry PI Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ibrahim, Nazri (2018) Sound Absorption Study Of Three-Dimensional Printed Micro-Perforated Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ibrahim, Nurul Hakimi (2018) Design And Development Of Basic Teaching Modules For Open Source JaamSim Discrete Event Simulation Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ilias, Izzah Nadhilah (2022) Automatic Additive Manufacturing Product Generation Through Computer Aided Process Planning Using 3D/4D/5D Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ilias, Muhammad Ikmal (2018) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Iqbal, Ahmad Amir Shafiq Ahmad (2019) Mechanical Evaluation Of Femur Geometry And Hip Protectors Using Pendulum-Based System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ishak, Aulia (2018) Pembangunan Metodologi Pemilihan Dan Penilaian Teknologi Memproses Sisa Industri Kelapa Sawit Menggunakan Kaedah Analisis Hierarki Proses. PhD thesis, Universiti Sains Malaysia. Ishak, Mohd Asrul (2005) 20 kWe Biomass Downdraft Gasifier System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ismadi, Nurul Syamimi Zahirah (2022) Aerodynamic Design Of A Roof Fairing For Trucks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ismail, Ahmad Norarif Amin (2019) The Vibration Analysis Of Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Azmi Adsorption Characteristic of a Two Layer Hollow Cylindrical Silica Bed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Azmi (2018) Effect Of Nozzle Rotation Angles And Sizes On Thermal Characteristic Of Swirl Anti-Icing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Azmi (2019) Experimental Investigation On A Desiccant Silica Bed for Dehumidification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Azmi (2019) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Azmi (2019) Heat Transfer Perfomance Of A Synthetic Jet Generated By Diffuser-Shaped Orifice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Mohd Syaifuldin (2005) Determination Of Exhaust Gas Concentration Around The Exhaust Manifold Of A Petrol Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ismail, Muhammad Dhirar As Suhaimi (2019) Three-Dimensional Fatigue Crack Growth Analysis Using Failure Mechanism Approach In Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ismail, Nur Amirah (2018) Thermoforming Process Simulation Of Stretchable Electronic Circuit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ismail, Nur Azwahana (2022) Simulation Of Check-In Passenger Flow For International Departure Due To Covid19 Situations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ismail, Nurul Aqilah (2018) Gasoline Quality Monitoring Via Vehicle OBD Data Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Iswady, Fateen Adibah (2018) Wear And Friction On Loaded Conveyor Belt. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) JJaafar, Muhammad Afiq (2017) Drying rate and thermal properties of solid fuel produced from hydrothermal and vapourthermal carbonization of high moisture content biomass material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jafri, Muhammad Nabil Asyraf (2018) Analysis Of Artificial Signals Of CPS, Spark Timing, And Fuel Injection Timing Toward The Engine Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Jaludin, Ahmad Amin Azmi (2017) Design Innovation For Calligraphy Using Reverse Engineering And CNC Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamaludin, Haziq (2017) Performance Comparison Of The AFC-Crude Approximation And AFC-Fuzzy Logic Controllers In Reducing The Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamaludin, Haziq (2017) Performance Comparison Of The AFC-Crude Approximation And AFC-Fuzzy Logic Controllers In Reducing The Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamaludin, Lily (2017) Project Management Practices- Case Studies At Food & Beverage Smes In Seberang Perai Municipality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamaludin, Lily (2017) Project Management Practices- Case Studies At Food & Beverage Smes In Seberang Perai Municipality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamaludin, Mohd Nazim (2003) Design And Fabrication Of Small Scale Extrusion Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted) Jamil, Nurul Izzati Mohamad (2019) Study on drawing die radius to load and thinning pattern of aluminium alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jamil, Saiful Syazwan Shamsul (2017) On The Performance Of The Motorcycle Engine Using Used Lubricant Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Japar, Mohd Anuar (2004) Machinability Study Of Porous Sea Coral Material For Use In Bone Grafting. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Jasni, Saiful Nizam (2001) Analisis Retak Dalam Pakej Elektronik: Penentuan Orientasi Dan Sudut Retak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Jason, Edwin (2022) Non-Linear Contact Finite Element Analysis Of Split Hopkisnon Tensile Bar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Joshua Wong, Jia Yi (2018) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Juhari, Jusliha (2018) Development Of Nanocasted Tin Oxide For Ethanol And Acetone Gas Sensor. PhD thesis, Universiti Sains Malaysia. Juma’at, Mohamad Haziq (2019) Simulation Of Blood Flow Through Transcatheter Heart Valve (Thv) Using Ansys Fluid Structure Interaction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Jusoh, Zuraidah (2005) An Analytical Review Of The Relationship Between Dispatching Rules And Performance For Dynamic Scheduling In An Identical Parallel Machine Environment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) KKai Li, Gwee (2018) Optimization Of Lighting Parameters For Edible Bird's Nest Vision Inspection System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kairi, Muhammad Izhar (2019) Synthesis Of Graphene From Alternative Precursors And The Use Of Quartz Plate For Carbon Source Manipulation. PhD thesis, Universiti Sains Malaysia. Kamaluddin, Fazrullah (2019) Microwave Tar Thermal Cracking System For A 10kw Downdraft Gasifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Kamar Shah, Noor Fajwa (2022) Study And Analysis Of Piezo Bender For Energy Harvesting Application Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kamaruddin, Eddy (2005) Tutorial Software For Control Chart. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kamarudin, Khairunnisa (2017) Optimization Of High-Mix Low-Volume Manufacturing System Using Discrete Event Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Kang, Jing Yong (2018) Foot Orthosis For Patients With Diabetic Foot Ulcer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kathirvelu, Vemal (2018) Development Of Apps For Predictive Maintenance System A Case Study In HP. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kee, Tze Shen (2018) Optimizing 3D Printing Parameters For Best Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Khiew, Fook Yun (2018) Development Of Decision Support System For Scheduling Machine Loading By Using Microsoft Office. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Kho, Ee Ping (2017) Design And Fabrication Of Small Scale Laser Cutting Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Khoo, Boon Sheng (2022) Development Of A Virtual Vehicle Identification For Tracking Hit-And-Run Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Khor, Chong Hwa (2019) Classifying Indian Classical Dances By Motion Posture Patterns. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Khor, Hee Huat (2005) Biomems: Thermal Effects Analysis Of DNA Cocktail Solution (DCS) In A Microfluidic Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Khor, Li Sing (2017) Defect Reduction Through Customer-Vendor Collaboration In Kaizen. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ko, Peck Yin (2017) Lean Improvement To Reduce Usage Rate Of Production Supplies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Koh, Han Teng (2017) Multipronged Projects To Improve Flow And Responsiveness In Receiving. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Kumar, Kesava Raj Vijaya (2019) Food Waste Carbonization Using Icrowave Oven. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) LLai, Pin Siew (2019) Data Mining On Retail Banking Simulation Model To Devise Productivity Improvement Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Latiffi, Nur Ainul Nurina Ishak (2019) Improving The Force Delivery Trend Of Nickel-Titanium Archwire In Orthodontic Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Lau, Dick Mun (2018) Developing Mobile Application For Generic Human-Machine Communication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Laupe, Laudin (2017) Parametric Study On The Production Of Dried Long Fiber In Palm Oil Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Laupe, Laudin (2017) Parametric Study On The Production Of Dried Long Fiber In Palm Oil Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Law, Khuan Foo (2018) Measurement Of Engagement And Cortical Reorganization In Brains Of Stroke Patients Via Electroencephalography (EEG) As A Result Of Visual Feedback Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lee, Han Wei (2018) Analysis Of The Ultrasonic Cautery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lee, Hong Lean (2017) Design And Development Of Automated Engine Test Cell System For Single Cylinder Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Lee, Kai Chen (2022) Product Design And Development Using Virtual Reality And CAD/CAM System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lee, Lai Seng (2019) The Development Of 8-Inch Roll-To-Plate Nanoimprint Lithography(8-R2p-Nil) System With Uv-Led Exposure. Masters thesis, Universiti Sains Malaysia. Lee, Ming Wei (2019) Design Improvement Of Photobioreactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Lee, Yee Von (2017) Developmeny Of A Visual Display As A Monitoring System To Calculate Overall Equipment Effectiveness (OEE). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Lee, Zhao Yang (2022) Development Of Machine Learning User Interface For Pump Diagnostics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Leong, Yong Sheng (2021) Simulation Of Series And Parallel Hydraulic Hybrid Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Leslie Kneoh, Yen Sing (2018) Feedback Control Of Inverted Pendulum Using Raspberry Pi Microcontroller And Arduino UNO. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Liew, Jin Fung (2022) Simulation Of Passenger Flow For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Chen Wee (2017) Finite Element Simulation Of The Crashworthiness Test Of Non-Uniform Thickness Blank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Lim, Ching Hock (2018) Performance Characteristics Of Car Alternator Coupled Directly To Micro Gas Turbine (MGT). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Joe Yin Design And Development Of 2-In-1 Automatic Pet Feeder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Jou Wyn (2022) Experimental Study On Powder Coated Surface With Polydur Zinc Based Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Kwan Hue (2022) Fiber Misalignment Effect On Compressive Properties Of Jute And Kevlar Composite Under Impact And Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Li Zi (2018) Lean Six Sigma Game App For Android. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Si Ying (2022) Developing A Discrete-Event Simulation Model For Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Wen Kai (2022) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Lim, Zhi Wey (2017) Development Of Fuel Consumption Engine Map For Myvi Engine Volumetrically. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ling, Siok Mei (2018) Computational And Experimental Study On Horizontal-Axis Wind Turbine Slotted Blade Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Loh, Hong Yi (2017) Set Up Reduction On Sheet Metal Fabrication Company C's CNC Punching Section. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Loh, Jit Seng (2003) Application Of Asymptotic Waveform Evaluation (AWE) Method In Solving Thermal And Vibration Problems. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Loh, Yuan Ting (2019) Tribological Property Of Road Marking Paint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Louis, Mark Selvan Anthony Rogers (2017) Performance Of Micro Steam Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Low, Pei Ying (2017) Implementing Kanban Concept In Production Planning And Control For A Domestic Precast Manufacturing Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) MMahyuddin, Muhammad Syahir (2019) Development Of Hydraulic Regenerative Braking Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mak, Kam Sheng (2018) Simulation Of Preventive Maintenance Schedule In Reducing Machine Stoppage And Downtime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Manap, Abdul Haadi Abdul (2021) Molecular Dynamics Simulation Of Pdms Nanostructure Distortion In Soft Lithography Demolding Process. PhD thesis, Universiti Sains Malaysia. Manivelu, Vishnuwaaran (2017) Development And Perfomance Of Cogeneration Biomass Stove Integrated With Thermoelectric Generator (Teg). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mansor, Nur Hidayah (2018) Design And Optimization Of Transition For Air-Filled Substrate Integrated Waveguide. PhD thesis, Universiti Sains Malaysia. Marzuki, Nur Aimi Amanina Mohd (2019) Implications Of Pressure And Range Of Motion On Posterior Fixation Of Thoracolumbar Burst Fractures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mat Junoh @ Yunus, Muhammad (2000) Rekabentuk Mesin Penguji Hentakan Motosikal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Md Isa, Mohamad Syazwan (2018) Application Of The Structural Dynamic Modification (SDM) Method To Reduce Noise And Vibration Of Vehicle Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Md Sukri, Muhammad Ahnaf Ataulah (2022) Design And Testing Of Patient-Specific Ankle Foot Orthosis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Md Yusof, Mursyidah (2017) Automated Core And Cavity Design System For Mould Works Using Generative Method Of Computer Aided Process Planning. Masters thesis, Universiti Sains Malaysia. Md. Ali, Affandy (2000) Analisis Kitaran Melalui Kerajang Airfoil NACA (Lapisan Sempadan) Dan Kawasan Pusaran. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Megat, Nik Muhammad Ashraf Che (2019) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMC201 – Measurement & Instrumentation [Pengukuran & Peralatan] Duration : 3 hours (Masa : 3 jam). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EMC301 – Measurement & Instrumentation Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMC311 – Mechatronics [Mekatronik] Duration : 2 hours Masa : 2 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMC322 – Automatic Control [Kawalan Automatik] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EME 411 – Numerical Methods for Engineers [Kaedah Berangka Untuk Jurutera] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EME 422 – Energy Conversion System (Sistem Penukaran Tenaga). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EME 422 – Energy Conversion System [Sistem Penukaran Tenaga] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EME 431 – Refrigeration & Air Conditioning [Penyejukan & Penyamanan Udara] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EME 432 – Internal Combustion Engine Duration: 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EME 432 – Internal Combustion Engine [Enjin Pembakaran Dalam] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EME 442 – Biomechanics [Biomekanik] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EME 451 – Computational Fluid Dynamics [Pengkomputaran Dinamik Bendalir] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EME 452 – TRIBOLOGY Duration: 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EME 452 – Tribology (Tribologi). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EME 452 – Tribology [Tribologi] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EME431 – Refrigeration and Air Conditioning Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EME432 – Internal Combustion Engine (Enjin Pembakaran Dalam). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMH 102 – Fluid Mechanics Duration: 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMH 102 – Fluids Mechanics [Mekanik Bendalir] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMH 211 – Thermodynamics [Termodinamik] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EMH 222 – Fluid Dynamics (Dinamik Bendalir). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMH 222 – Fluid Dynamics [Dinamik Bendalir] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMH 222 – Fluid Dynamics [Dinamik Bendalir] Duration: 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMH 332 – Applied Thermodynamics [Termodinamik Gunaan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMH 441 – Heat Transfer [Pemindahan Haba] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 101 – Engineering Mechanics [Mekanik Kejuruteraan] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 101 – Engineering Mechanics [Mekanik Kejuruteraan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMM 102 – Statics Duration: 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM 102 – Statics. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMM 102 – Statics [Statik] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 213 – Strength of Materials [Kekuatan Bahan] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 213 – Strength of Materials [Kekuatan Bahan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMM 242 – Dynamics [Dinamik] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EMM 252 – Engineering Dynamics (Dinamik Kejuruteraan). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 331 – Solid Mechanics [Mekanik Pepejal] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMM 331 – Solid Mechanics [Mekanik Pepejal] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMM242 – Dynamics. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMM252 – Dynamics. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMT 211 – Engineering Probability & Statistics [Kebarangkalian & Statistik Kejuruteraan] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EMT 211 – Engineering Probability & Statistics [Kebarangkalian & Statistik Kejuruteraan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMT 212 – Computational Engineering Duration: 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMT 212 – Computational Engineering [Kejuruteraan Pengkomputeran] Duration :3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EMT 302 – Mathematical Modeling Duration: 2 hours (2+2). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EMT 302 – Mathematical Modelling In Engineering [Pemodelan Matematik Di Dalam Kejuruteraan] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EMT212 – Computational Engineering (Kejuruteraan Pengkomputeran). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPC431 – Robotic and Automation [Robotik dan Automasi] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPC431 – Robotic and Automation [Robotik dan Automasi] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EPE 401 – ARTIFICIAL INTELLIGENCE IN MANUFACTURING Duration : 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EPE 442 – ADVANCED SEMICONDUCTOR MANUFACTURING TECHNOLOGY Duration : 2 hours ( 2+2 hour for Asynchronous). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPE401 – Artificial Intelligence in Manufacturing [Kecerdikan Rekaan dalam Pembuatan] Duration : 2 hours Masa : 2 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE421 – Ergonomics And Industrial Safety [Ergonomik Dan Keselamatan Industri] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE421 – Ergonomics And Industrial Safety [Ergonomik Dan Keselamatan Industri] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPE431 – Project Management Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE431 – Project Management [Pengurusan Projek] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE431 – Project Management [Pengurusan Projek] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE441 – Nano and Micro Manufacturing Engineering [Kejuruteraan Pembuatan Mikro dan Nano] Duration : 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE441 – Nano and Micro Manufacturing Engineering [Kejuruteraan Pembuatan Mikro dan Nano] Duration : 2 hours Masa : 2 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE462 – Industrial Machine Vision [Penglihatan Mesin Industri] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPE462 – Industrial Machine Vision [Penglihatan Mesin Industri] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPE482 – Optical and Surface Metrology [Metrologi Optik dan Permukaan] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EPM 212 – METROLOGY AND QUALITY CONTROL Duration : 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EPM 322 – INDUSTRIAL ENGINEERING Duration : 2 hours ( 2+2 hour for Asynchronous). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2017) EPM 342 – PRODUCTION MANAGEMENT Duration : 2 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPM102 – Engineering Economy [Ekonomi Kejuruteraan] Duration : 2 hours Masa : 2 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM201 – Engineering Economy Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM212 – Metrology and Quality Control (Metrologi dan Kawalan Kualiti). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPM212 – Metrology and Quality Control [Metrologi dan Kawalan Kontrol] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM311 – Engineering Management [Pengurusan Kejuruteraan] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM311 – Engineering Management [Pengurusan Kejuruteraan] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPM321 – Manufacturing System Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM321 – Manufacturing System [Sistem Pembuatan] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM321 – Manufacturing System [Sistem Pembuatan] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPM322 – Industrial Engineering [Kejuruteraan Industri] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPM342 – Production Management [Pengurusan Pengeluaran] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM451 – Computer Integrated Manufacturing [Pembuatan Tersepadu Komputer] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPM451 – Computer Integrated Manufacturing [Pembuatan Tersepadu Komputer] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2021) EPP 212 – ADVANCED MANUFACTURING TECHNOLOGY Duration : 2 hours 30 minutes (plus 30 minutes submission). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP 331 – Manufacturing Technology II [ Teknologi Pembuatan II ] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP 331 – Manufacturing Technology II [ Teknologi Pembuatan II ] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP201 – Manufacturing Technology I [Teknologi Pembuatan 1] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP201 – Manufacturing Technology I [Teknologi Pembuatan 1] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP212 – Advanced Manufacturing Technology (Teknologi Pembuatan Termaju). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EPP212 – Advanced Manufacturing Technology [Teknologi Pembuatan Termaju] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP322 – Advanced Manufacturing Process [Proses Pembuatan Termaju] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2020) EPP322 – Advanced Manufacturing Process [Proses Pembuatan Termaju] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2022) EPP351 – Advanced Manufacturing Process Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EUM113 - Engineering Calculus (Kejuruteraan Lanjutan) Duration. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2019) EUM114 - Advanced Engineering Calculus (Kalkulus Kejuruteraan Lanjutan) Duration : 3 hours (Masa : 3 jam). [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EME 432 – Internal Combustion Engine [Enjin Pembakaran Dalam]. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan Mekanik (2020) EMM 331 – Solid Mechanics [Mekanik Pepejal] Duration : 3 hours. [Teaching Resource] (Submitted) Mekanik, Pusat Pengajian Kejuruteraan Pusat Pengajian Kejuruteraan (2019) First Semester Examination Academic Session 2018/2019 December 2018/January 2018 EMH 441 – Heat Transfer [Pemindahan Haba] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted) Mitchelle, Law Jyy Jinn (2019) Implementation Of Proportional, Integral And Derivative(Pid) Terms For Thermal Management Through Simulink And Arduino Platform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mohamad, Faiz (2017) Evaluation Of Load-Transfer Pattern In Implanted Femur By Patient-Specific Fe Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mohamad, Nurnadia Azwa (2018) Investigation On The Effect Of Dry Turning On AISI 305 Steel With Ceramic Inserts By Analysis Of Workpiece Surface Profile. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Hanifah, Mohamad Farhan (2018) The Study Of Vibration Motion Of Honey Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Nizar, Luqman Haikal (2022) Innovative Tool For Composite Machining In Aerospace Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Rafdzi, Muhammad Farid (2018) Influence Of Material Properties On The Aperture Filling During Stencil Printing Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Shaberi, Mohamad Nazhan (2022) Biomechanical Evaluation Of Spinal Loadings During Oil-Palm Plantation Tasks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Sidik, Mohamad Sabri (2005) Performance Analysis Of A Compliant Wing For A Light Aircraft. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamad Zahari, Ahmad Amirul (2022) Controlling An-Inverted Pendulum System Using A Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamed, Abdul Rahman (2005) Project Management For Robocon 2005. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamed, Intan Fadhlina (2000) The Study Of Hollow Rectangular Subjected To Torsional Force. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamed, Muhammad Aizuddin (2018) Research Of Screw Expeller On Oil Palm Seed: A CFD Study On Barrel Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamed Ghouse, Muhammad Suffi Fazari (2022) Simulation Of Cantilevered Piezoelectric Energy Harvesters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohamed Hanafee, Ameer Mohamed Abdeel Aziz (2018) Integration Of Machine Vision In Industrial Robot For Automated Composite Panel Punching. Masters thesis, Universiti Sains Malaysia. Mohammad Musa, Mohammad Taufiq Haiqal (2018) Design And Fabrication Of Shape Memory Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd, Mohd Syarifuddin (2000) Analisis Getaran Menggunakan Perisian Unsur Terhingga: “Analisis Kestabilan Brek Cakera”. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Abd Fatah, Ahmad Fuzamy (2018) Lanthanum Strontium Cobalt Ferrite-Copper Oxide As Cathode For Intermediate Temperature Solid Oxide Fuel Cell. Masters thesis, Universiti Sains Malaysia. Mohd Adnan, Muhammad Aimi (2018) The Use Of Response Surface Methodology (RSM) To Optimize The Twist Drill Geometry In Single Shot Drilling Of Stacked Alumina-Carbon Composite Layer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Azam, Muhammad Azfar Razin (2018) On The Performance Of The Motorcycle Engine Using Filtered Recycle Lubricant Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Faizal, Muhammad Faris (2022) Simulation Of Multistage Cascaded Thermoelectric Generators With Adaptive Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Hafni, Aidil Azwadi (2022) Mechanical-Physical Properties Characterization Of Alternative Materials For The Application In Highway Guardrail. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Harizi, Muhammad Hafizam Afiq (2022) Data Mining Analysis Of Chronic Kidney Disease (CKD) Level. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Nasir, Mohd Naziman (2005) Building Acoustic Analysis: Finite Element Method Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Noor Ariffin, Siti Syairah (2022) Tribological Study Of Additive Manufactured Aluminium Alloy ER5356 For Potential Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Nor Halimuddin, Normalyana (2022) Three-Dimensional Elastic-Plastic Crack Tip Stress Fields. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Senusi, Shahrullizam (2004) Design, Analysis And Prototyping Of Endosurgical Trocar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Shafee, Muhammad Amirul Farhan (2022) Predictive Analysis Of Ice, Hybrid And Electric Vehicle: Selected Case Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Shukor, Nurzayani Nabilah (2018) Design Innovation For Replica Trophy Using Reverse Engineering And CNC Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mohd Zaini, Mohamad Zulhisyam (2022) Potential Failure Mode In Pergau Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mokhtar, Mohamad Dzul Asyraf (2022) Development Of Omnidirectional Drive System Using Mecanum Wheels For Patient Transfer Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Moustafa Hebish, Anas Ahmed Moustafa Moustafa (2022) Optimization Of Mild Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muhaimi, Nur Muhaimin Aidil (2017) Designing A Combustion Chamber For Cascading Thermoelectric And Thermophotovoltaic Power System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Muhamad, Muzkhairil (2001) Mengenalpasti Kemungkinan Lokasi Retak Di Dalam Pakej Elektronik Menerusi Simulasi Kaedah Unsur Terhingga. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muhamad Fikri, Jaafar (2022) Shell Eco-Marathon Fuel Consumption Engine Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muhamad Yusli, Siti Rosyada (2018) The Numerical Comparison Study On The Effect Of The Anti-Icing Methods On Thermal Stress Distribution Of Nacelle Lip-Skin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muhamat, Noor Alwani (2017) Controlling Greenhouse Environment For Green Rose Plantation Using Raspberry Pi Microcontroller And Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Muhammad Rafiq, Mohammad Sabri (2018) Effect Of Temperature On Flexible Printed Circuit Board During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muhammad Shafeeq, Abdul Hannan (2018) Two-Dimensional Fatigue Crack Growth Analysis Using Extended Finite Element Method (XFEM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Muniandy, Vimalanathan (2005) Electronic Component Cooling Using Jet Aeration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Munisuaran, Kishen (2022) Performance Comparison Of Steam And Air-Steam Gasification Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Munusamy, Sharven (2022) Development Of A Portable Low Strain Rate Testing Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Murugaya, Thivines (2022) Design And Development Of Robot End-Effector For The Use In Lower-Limb Stroke Rehabilitation Exercises. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Musa, Shah Mudzaffar (2001) A Study Falling Particles In Various Types Of Fluids With Different Viscosity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Musa, Zainal (2017) Design Of An Easy To Clean Ceiling Fan For Domestic Users. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mustafa, Mohammed Irfan (2005) Experiment On EDM Machining For Advance Engineering Material Using Taguchi Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mustaffa, Nadirah (2017) Structural Analysis Of Stretchable Electronics Joint Under Tensile And Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mustaffa Kamal, Muzhaffar (2018) Design And Development Of A Tensile Split Hopkinson Gas Gun. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Mustapa, Nurul Safinaz (2017) Design Of Photobioreactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Mynn Wei, Teoh (2022) Detection And Counting Of E. Coli On Specialized Test Piece Using Yolo v4. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) NNabli, Muaz (2022) Predictive Analysis Of Demand Of Electric Vehicles In Malaysia And Its Potential. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Nasir, Md Khidir Amin Md (2019) Study Of Physiochemical Characteristics Of EFB Briquettes And Its Potential Use As Dual Feul In Cvcc. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nasir, Mohammad Nazmi Mohammad (2019) Silica gel multilayer desiccant hollow cylinder bed for axial flow dehumidification adsorption operations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nasir, Muhammad Amin Zaquan Mohd (2019) Uph Improvement On Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nawawi, Nazihah (2014) Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys. Masters thesis, Universiti Sains Malaysia. Nayagam, Brian Pravinnayagam Adie (2021) Analysis Of Vibration Characteristics In Centrifugal Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nazry, Farah Aisyah (2018) Computational Fluid Dynamics Of Urinary Catheterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ng, Eng Yeong (2019) Pretrained Convolutional Neural Networks As Feature Extrator Of Eggshell Mottling Pattern For Quality Inspection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ng, Fei Chong (2019) Non-Newtonian Fluid Analytical Filling Time Model With Contact Line Jump Underfill Encapsulation. PhD thesis, Universiti Sains Malaysia. Ng, Hou Guan (2000) Pembangunan Perisian Untuk Termodinamik Sistem Pendinginan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ngatmi, Faharudin (2005) Analysis Of The Effect Of Dynamic Issues In Scheduling Of Flow Shop Environment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ngo, Shi Hui (2022) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ngo, Yi Bin (2019) Development Of Ultrasonic Scalpel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nor, Amira Muhammad (2017) Fabrication methods of egg polymer matrix and inner banana trunk polymer matrix using injection moulding versus vacuum assisted resin transfer molding process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nordin, Mohd Zuhairi (2019) Combustion Stability Analysis Using Vegetable Oil In Micro Gas Turbine Combustion Chamber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nordin, Muhammad Nor Akmal (2022) Effects Of Oil Palm Plantation Tasks On Skeletal Muscle Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Norisam, Norsofea (2018) Precision Hole-Making On Composite Panel-Effect To Productivity And Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Norman, Hua Shijie (2005) Thermal Management In Stacked Dies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Nudin, Saparuddin (2017) Performance Of Micro Gas Turbine Combustion Chamber With Diesel Fuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nudin, Saparuddin (2017) Performance Of Micro Gas Turbine Combustion Chamber With Diesel Fuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Nur Zawani Syifaa, Mohd Muzaini (2018) Dewatering Method For Food And Kitchen Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) OOmar, Mohamad Tarmizi (2003) Pembuatan Plat Implan Menggunakan Keluli 316L. Masters thesis, USM. Omar, Mohammad Shafiq (2022) Meso-Scale Modelling Of Pultruded Hybrid Composite Under Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) On, Choong Wah (2003) Design And Fabrication Of Autnomous Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ong, Guan Kai (2022) Effects Of Air Inlet Angle On The Combustion And Emission Characteristics Of A Cylindrical Chamber Fueled With Waste Cooking Oil Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ong, Mei Kiem (2018) A Study On Mechanical Behaviour Of Lead-Free Solder Using Nanoindentation Test. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ong, Sin Joo (2018) Developing Android Application To Guide Lean Six Sigma PDCA Project. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ong, Toon Sai (2001) Development Of Manufacturing Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ong, Xhin Jie (2019) Design Of Ankle Foot Orthosis (Afo) Using 3d Printing For Patient Comfort And Agility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ong, Xuan Zhi (2016) Material Replenishment System For SMT Kitting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ong, Xuan Zhi (2016) Material Replenishment System For SMT Kitting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ong, Zi Hui (2022) Heat Dissipation Enhancement Using Staggered Fin Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ooi, Seng Yeong (2006) Design And Development Of Gas Argon Purging System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ooi, Yi Jing (2019) Relationship Of Tribological Property Of Different Flooring Textures On Human Mobility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Oon, Bee Mun (2019) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Osman, Muhamad Nazmi (2022) Conceptual Analysis Of Lean Principles And Tools In Manufacturing Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) PPPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 130/3 – MEKANIK KEJURUTERAAN FEB - MAC 03. [Teaching Resource] PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 238-3 FLUID MECHANICS OCT-NOV 07. [Teaching Resource] PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 238-3 FLUID MECHANICS OKT-NOV 06. [Teaching Resource] PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 238E-3 FLUID MECHANICS OKT 04. [Teaching Resource] PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 221 - PRINSIP DAN MEKANIK BAHAN NOV 05. [Teaching Resource] PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 212(4) - DINAMIK & MEKANISMA MAC 05. [Teaching Resource] PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EMH 362E(3) - ENJIN PEMBAKARAN DALAM MAC 05. [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EMC 201 MEASUREMENT & INSTRUMENTATION [PENGUKURAN & PERALATAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2015) EMC 201 MEASUREMENT & INSTRUMENTATION (DEC 2015). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMC 201 MEASUREMENT & INSTRUMENTATION [PENGUKURAN & PERALATAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMC 311 MECHATRONICS (DEC 2015). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMC 311 MECHATRONICS [MEKATRONIK] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EMC 311 MECHATRONICS [MEKATRONIK] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EME 411 NUMERICAL METHODS FOR ENGINEERS [KAEDAH BERANGKA UNTUK JURUTERA] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EME 411 NUMERICAL METHODS FOR ENGINEERS [KAEDAH BERANGKA UNTUK JURUTERA] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EME 411 NUMERICAL METHODS FOR ENGINEERS [KAEDAH BERANGKA UNTUK JURUTERA] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EME 431 REFRIGERATION & AIR CONDITIONING [PENYEJUKAN & PENYAMANAN UDARA] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EME 451 COMPUTATIONAL FLUID DYNAMICS [PENGKOMPUTERAN DINAMIK BENDALIR] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EME 451 COMPUTATIONAL FLUID DYNAMICS [PENGKOMPUTERAN DINAMIK BENDALIR] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EMH 211 THERMODYNAMICS [TERMODINAMIK] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMH 332 APPLIED THERMODYNAMICS [TERMODINAMIK GUNAAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMH 441 HEAT TRANSFER [PEMINDAHAN HABA] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EMM 101 ENGINEERING MECHANICS [MEKANIK KEJURUTERAAN (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMM 101 ENGINEERING MECHANICS [MEKANIK KEJURUTERAAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 201(4) - MEKATRONIK NOV 05. [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EMM 211(3) - MEKATRONIK NOV 05. [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMM 213 STRENGTH OF MATERIALS [KEKUATAN BAHAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMM 331 SOLID MECHANICS [MEKANIK PEPEJAL] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EMT 211 ENGINEERING PROBABILITY & STATISTICS [KEBARANGKALIAN & STATISTIK KEJURUTERAAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPC 431 – ROBOTIC AND AUTOMATION [ROBOTIK DAN AUTOMASI] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPE 431 PROJECT MANAGEMENT [PENGURUSAN PROJEK] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPE 441 MICRO AND NANO MANUFACTURING ENGINEERING [KEJURUTERAAN PEMBUATAN MIKRO DAN NANO] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPE 462 INDUSTRIAL MACHINE VISION [PENGLIHATAN MESIN INDUSTRI] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPM 321 MANUFACTURING SYSTEM [SISTEM PEMBUATAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPM 451 COMPUTER INTEGRATED MANUFACTURING [PEMBUATAN TERSEPADU KOMPUTER] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EPP 201 MANUFACTURING TECHNOLOGY I [TEKNOLOGI PEMBUATAN I] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EPP 322 ADVANCED MANUFACTURING PROCESS [PROSES PEMBUATAN TERMAJU] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2017) EPP 331 MANUFACTURING TECHNOLOGY II [TEKNOLOGI PEMBUATAN II] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource] PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (1995) JIF 211 – Mekanik - Mei - Jun 1995. [Teaching Resource] (Submitted) Pauzi, Adha Fahmi (2018) Experimental Of Tailor Welded Blanks Fabricated Using Friction Stir Welding (FSW). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Peh, Ching Guan (2018) Development Of Electronically Controlled Common Rail Fuel Injection System And Optimization Of Injector Parameters In Single Cylinder Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Poo, Chee Shen (2018) Performance Characteristic Of Single Stage Micro Gas Turbine (MGT) Running On Liquid Biofuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Poon, Heong Wai (2019) Evaluation Of Stress Relaxation In Bentonite Filled Rubber Under Tensile Load Using Scanner Based Digital Image Correlation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Pozai, Nurul Natasha Aiza (2022) Experimental Modelling And Control Of Linear Actuator For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) RRagupathy, Rohendran (2022) Experimental Study Of Heat Transfer Rate On Acoustic Liner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Raja Ghazilla, Raja Najihah (2004) Software Development For Design Of AOQ/AOQL Attribute Sampling Plan For Manufacturing Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Raja Gobal, Hehgeraj (2022) Study Of Deformation And Crack Propagation On Component During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rajasagaran, Kogulan (2018) Noise And Vibration Study Of Commercial Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rajenthiren, Sharaneish (2022) Numerical Analysis Of Polymer Melts Flow Behaviour In Grooved Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rajogoval, Illayakantthan (2022) Mining The Basic Reproduction Number (R0) Forecast For The Covid Outbreak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ramasamy, Mugilan (2005) Optimization Of Bar Linkage By Using Genetic Algorithms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ramlan, Nur Diyana (2022) Comparison Of Bio-Oil And Synthetic Lubricants Tribological Characters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ramli, Mohd Akmal (2018) Mems In Control Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Ramli, Muhammad Faiz (2019) Development Of Hydraulic Launch Assist Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ramly, Mohd Rizal (2000) Sukatan Prestasi Pembuatan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rani, Muhammad Rabbani Abd (2017) Simulation Study Of Flow Profile Of Air Chamber At Various Heat Supplied. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Rauf, Ahmad Arifin Abd (2017) Study Of Signal Processing Of Engine Knocking On Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Razak, Abang Muhammad Farith (2022) Optimization Of Flameless Cyclone Combustion Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Razak, Muhammad Ariff Solehin (2018) Numerical Study Of The In-Cylinder Air Flow Characteristic Generated By GVD For Air-Fuel Mixing Improvement Using Emulsified Biofuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Razali, Muhammad Safuan (2018) Thermoelectric Power System From A Liquid-Fueled Combustor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rohizam, Rajeeha (2022) Cycle Time Improvement Of Combined Punching And Drilling Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Roslaili, Muhamad Zulhilmi (2018) One Way FSI Study Of The Stress And Strain Distribution On The Water Dam Spillway Stilling Basin Baffles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Roslee, Muhammad Sharifuddin (2022) Investigating The Performance Of Metaheuristics To Optimize The Revenue Of Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rosli, Fadlhlin Sakina (2022) Compressive Properties Of Jute/Kevlar Under Static And Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rosli, Muhammad Farid Amirul (2022) Experimental Study On The Impact Of DBD Plasma Actuator Geometry And Electrical Input On Thrust Generation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Rosli, Muhammad Hisyamuddin (2018) Parallel Solvers Using PETSc For Nonlinear Conduction Problems In Higher Dimensions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) SS.Shaik Dawood, Anvar Mydin (2000) Numerical Analysis Of A Microchannel By Using Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) S.Syed Ahamed, Mohamed Yusuff (2005) Assessment Of Roughness Of Machined Surfaces Using Laser. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) SERC, Pusat Penyelidikan Sains & Kejuruteraan (2016) Science & Engineering Research Centre: Corporate Facilities & Space Working Area. [Image] SERC, Pusat Penyelidikan Sains & Kejuruteraan (2016) Science & Engineering Research Centre: Testing & Analysis Services Information Brochure. Documentation. Science & Engineering Research Centre. SERC, Pusat Penyelidikan Sains & Kejuruteraan (2016) Universal Testing Machine Electro-Mechanical 50kN. Documentation. Science & Engineering Research Centre. Sageman, Salmiyah (2017) Refurbishment And Upgrading The Different Types Of Motor Using Raspberry Pi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Sahar, Nurhamizah (2018) Heat Transfer In Staggered Oblique Fin Microchannels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Sahrudin, Intan Norshalina (2018) Experimental On Sulfur Reduction Process For Waste Product And Biodiesel Fuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Saifuddin, Siti Adawiyyah Siddiqa (2019) Development Of Artificial Intelligence (Ai) For Image Processing And Conceptual Distance Computation From Camera For Pick And Place Of Oil Palm Fresh Fruit Bunch (Ffb). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Salleh, Muhammad Safwan (2022) Simulation Of Flexible Capacitive Strain Sensor For Food Packaging Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Salleh, Siti Norfatihah (2022) Safety Culture Awareness Of Laboratory Activities Among Universiti Sains Malaysia (USM) Engineering Students. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Sam, Jun Kok (2019) Control Of 3d Printer Using Drone With Autopilot And Raspberry Pi Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Samad, Mohd Hazim Sadiq Abd (2017) Influence Of Squeegee Impact On Stencil Printing Process- CFD Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Sani, Muhammad Qayum (2018) Effects Of Octane Rating Of Commercially Available Gasoline Fuel On Engine Performance, Emissions And Combustion Characteristic In Spark Ignition (SI) Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Sekar, Sageein (2022) Development Of Affordable Full Body Isolation Pod. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Shaari, Mohd Farhan (2019) Performance Study Of Kitchen Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Shaharudin, Akmarul Hisham (2019) Thermoelectric Power System From A Liquid-Fueled-Fired Porous Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Shahidan, Muhammad Danish Haziq (2017) Effect Of Different Percentages Of Biodiesel-Diesel Blends On Combustion, Performance And Emission Characteristics Of Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Shamsudin, Siti Nor Atiqah (2018) A Study On Overall Equipment Effectiveness (OEE) For Performance Measurement Case Study For Surface Mount Technology (SMT) Department. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Shamsul Khair, Nurul Syifa’ (2022) Effect Of Ageing Treatment On Force-Deflection Behaviour Of NiTi Wire In Three-Point And Three-Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Sha’ari, Ahmad Syafiq Nazri (2021) Numerical Investigation Of Dva In Attenuating The Transmitted Handarm Vibration From The Motorboat Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Shea Wen, Lee (2022) Powered Stretcher For Patient Transfer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Siallagan, Sahala (2017) Impact And Benchmarking Study Toward Technology And Innovation Capabilities On Oil Palm Based Industries. PhD thesis, Universiti Sains Malaysia. Sidek, Nur Shafikah (2019) Design And Fabrication Of Chevron-Notch Plain-Strain Fracture Toughness Testing System For Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Sidup, Saiful Bahri (2004) Analysis Of Charge Flow In Exhaust Manifold Of Acar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Singh, Suraj (2022) Combustion Characteristics Study Of Low Grade Producer Gas From Carbonized Empty Fruit Bunch (EFB) Briquettes Gasification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Sulaiman, Mohammad Shah Affandi (2019) Combustion Characteristics Of A Swirl Combustor Operating On Kerosene Vegetable Cooking Oil (Vco) Fuel Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Syed, Mohammad Harith Yaccob (2017) Simulation Effect Of Hot Gas Impingement On Nacelle Lip Skin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Syn, Yang Leong (2000) Modifikasi Pencerna Anaerobic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) TTai, Pei Li (2019) Design And Development Of An Ankle Joint Rotator For Lower Limb Prosthesis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Chin Cheang (2006) Study On The Characteristics Of Ballastic Black Coated On Solar Evacuated Tubes – Determination Of Efficiency Factor For Varying Solar Insolations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Han Peng (2018) Parallel And Series Electric Hybrid Vehicle Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Jian Xin (2019) Construction Of Hybrid Geometric Modelling For Injection Mould Using Cadcam System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Juh Hau (2017) Quality Management In Micro Enterprises Food And Beverage Processing Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Pe Hao (2019) Assessment Of Fabric Waste As Fuel In Biomass Gasification System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Sak Jie (2019) Active Vibration Control Of The Suspended Handle Using Inertia-Type Piezoelectric Actuator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Sher Wen (2022) Final Design Improvement Of Replica Trophy From Prototype To Mass Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Su Sze (2019) Data Mining On Machine Breakdowns And Effectiveness Of Scheduled Maintenance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Sze Ming (2017) Simulation Of Preventive And Corrective Maintenance Schedule In Reducing Machine Stoppage And Downtime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Teong Sheng (2017) Development Of Micro Heating Element By Optical Lithography On Alumina Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Wai Yee (2018) Development Of A New Method To Measure The Creep Behavior Of Rubber With The Addition Of Bentonite Based On Scanner-Based Image Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Yan Xu (2018) Developing Flow In Microchannel Having Regular Microstructure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Yong Quan (2022) Finite Element Analysis Of Pull-Out Performance Of Bone Screw. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tan, Yong Ren (2019) The main factors affecting key characteristics of fuel-efficient driving and safe driving. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Zheng Heng (2017) Performance Testing Of LPG-Fired Monotube Steam Generator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tan, Zheng Heng (2017) Performance Testing Of LPG-Fired Monotube Steam Generator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tang, Jau Hoong (2018) Knowledge Discovery Of Noise Level In Lecture Rooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tarmizi, Illma Laili Yasmin (2018) Design And Fabrication Of Semi-Auto Wafer Scriber For 4-In And 8-In Wafers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Taufik, Rais Ahmad (2019) Scalable Fabrication Of Nickel Micropillars Using Ultra-Violet Photolithography Process For Microelectronics Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tay, Ying Keat (2022) Evaluation Of Turbidity Measuring Using IoT Based Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Teoh, Chee Haw (2018) Development Of Linkage Mechansim For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Teoh, Cheng Lay (2017) Development Of Instantaneous Fuel Consumption Measuring System Using Arduino. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Teoh, Chin Keng (2018) Design And Fabrication Of Spin Coating System For 8-Inch Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Teoh, Jing Xiang (2018) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Teow, Soo Pei (2005) Weld Defect Classification Using Polar Radius Signature And Neural Network. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Tharumaalingam, Vimalraj (2022) Fuel Consumption And Fuel Economy Of Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Thenesh, Selvam (2017) Effect Of Tool Wear On Turned Surface Using Continous Wavelet Transform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tiew, Yin Cheng (2017) Smart Leg Rehabilitation System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Ting, Kin Choon (2017) Experimental Parameters Study Of Micro-Perforated Panel And The Application On Vacuum Cleaner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Toh, Han Yaung (2019) Moiré Method Based Tilt Sensing System For Landslides Monitoring Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Tong, Wen Le (2018) Mechanical Evaluation Of Locking Compression Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Too, Mei Xian (2019) Effect of machining parameters on the surface finish quality of natural fiber composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) VVoon, Zhen Liang (2019) Vibration And Noise Attenuation On A Straight Chain Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) WWahab, Andyqa Abdul (2019) Experimental Investigation On The Performance Of Regeneration For Axial Flow Multilayer Silica Gel Hollow Cylinder Desiccant Bed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Wahidon, Amirul Faez (2019) Experimental Modelling And Control Of Pneumatic Cylinder For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Wan, Dun Ye (2018) Study Of Engine Performance And Emissions Characteristics Of A SI Engine Fueled With Different Octane Rating Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wan, Kok Seong (2005) Optimization Of Injection Molding Parameters Fo Production Of Polypropylene Plastic Tray Using Taguchi Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wan Abdullah, Mohd Ridzuan (2000) Identifying Harmful Pollutants From Conventional Energy System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wan Ismail Khairudin, Wan Ahmad Firdaus (2005) Design And Development Of Biomechanics Calculation Software For Hand Movement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wan Mamat, Wan Mohd Fadhli (2004) Optimization Of Wire And Tube Condenser In Refrigeration Cycle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wanatasanappan, Vignesh Vicki (2021) Experimental Study On Ai2o3-Tio2 And Ai2o3-Cuo Hybrid Nanofluids For Lithium Ion Battery Cooling. PhD thesis, Universiti Sains Malaysia. Wei Tong, Koh (2022) Air-Drill With Accelerometer And Microphone For Composite Drilling Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wong, Ci Qian (2019) Development Of A Material Delivery System Of 3d Printing Used For Building Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Wong, Ee Fun (2016) Crack analysis using extended finite element method with virtual crack closure technique. Masters thesis, Universiti Sains Malaysia. Wong, Hsueh Chung (2018) Classification Of Eggshell Translucent Areas For Quality Determination Using Alexnet. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wong, Jen Nyap (2018) Simulation Of Active Force Control Using Intelligent Methods To Reduce Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wong, Kah Jian (2017) On The Correlation Factor Between Key Characteristics Of Efficient Driving And Safe Driving. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Wong, Nguk Sing (2004) Thermal Analysis Of The Composite Wall Subjected To Time Dependent Temperature Variation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wong, Pei Wen (2022) Mechanical Properties Of Porous NiTi Shape Memory Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Wong, Zie Jen (2022) Vibration-Fatigue Assessment On Electronics Interconnections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) YYahaya, Muhammad Azizi (2017) Effect Of Fluoride And Acid On Shape Memory Behaviours Of Niti Orthodontic Archwire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yanki Naidu, Ramesh (2005) Technical & Financial Analysis Of Biomass Cogeneration Power Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yap, Chui Sheng (2005) Performance Of Internal Combustion Engine Using Fuel From Biomass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yap, Eng Sam (2018) Mixing In Microchannel Patterned With Superhydrophobic Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yap, Mew Yaw (2019) Numerical Simulation On The Performances And Emissions Of The Direct Injection Compression Ignition Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yap, Pooi Yee (2018) Study On Various Adhesion Mechanism For A Wall Climbing Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yap, Woan Wei (2019) Conceptual Analysis Of Lean Manufacturing (Lm) Principles For Small And Medium Enterprise (Sme). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yassine Mahamat, Ibrahim Mahamat (2022) Effect Of Transition Taper Length On Air-Filled Substrate Integrated Waveguide Losses. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yeap, Seng Chye (2003) Heat Pump Assisted Clothes Dryer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yeap, Yi Ling (2018) On The Electricity Demand In Relation To Rise Of Electric Vehicles In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yee, Qian Hui (2022) Design And Development Of A Flight Operator Safety Audit System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yeo, Ying Heng (2019) Diesel Engine Control And In-Cylinder Peak Pressure Monitoring System Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yeoh, Keat Hor (2016) Hydrothermal and Vapothermal Carbonization of Agricultural Wastes to Produce Solid Fuel. Masters thesis, Universiti Sains Malaysia. Yeoh, Pang Tee (2001) Analisis Persembahan Pengumpul Tenaga Suria Plat Rata. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yeoh, Shen Horng (2017) Finger Motion In Classifying Offline Handwriting Patterns. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yeoh, Sze Chee (2018) Vibration Attenuation On Vacuum Cleaner By Rubber Mount. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yong, Cheng Wai (2017) Innovation And Firm's Performance In Malaysia Seberang Perai Region SME's Food Processing Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yusman, Muhammad Syafiq Farhan (2022) Fatigue Life Prediction For Small Component Welds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yusof, Norazian (2005) An Approach To Assembly Facilities Layout Design Problems Using Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yusof, Wan Putera Saidina Umar Wan (2019) Fluid-Structure Interaction (Fsi) And Sediment Transport Study Of Tnb Hydropower Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yusoff, Norwahida (2018) Quantification Of Three-Dimensional Elastic-Plastic Crack-Tip Stress Fields. PhD thesis, Universiti Sains Malaysia. Yusoff, Nur Maisara Mohamed (2019) Effect Of Pressure And Droplet Number On Smt Adhesive Dispensing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Yusri, Akmal (2022) Stress-Strain Behaviour Of Conductive Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Yusri, Muhammed Aqel (2018) Development And Performance Characteristics Of A Swirl Combustor Operating On VCO-Blended Fuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) ZZafrullah, Muhammad Naseeruddin (2018) Low-Cost Retrofit Hybrid System For Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zainal Abiden, Zabeer Abhar (2018) The Performance Of Steam Engine System With Retrofitted Reciprocating Engines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zainal Abidin, Nur Sarah (2022) Evaluation Of Sound Absorption Of Micro Perforated Panel Made By Palm Oil Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zainal Abidin, Zulhanim (2005) Product Demand Forecasting Using Artificial Neural Network (ANN). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zakaria, Muhammad Naim (2022) Characterization Of Strain Hardening Three Dimensional Crack-Tip Stress Field. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zakaria, Muhammad Syafiq (2022) Design Of A Miniature Axial Blower For A Portable Thermal Comfort System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zalkapli, Muhammad Amir (2022) Nanoindentation Of Copper Thin Film On Silicon Substrates. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zan, Muhammad Zaeem Mohamad (2017) Performance Characterisric Improvement Of An Upscaled Gammatype Stirling Engine By Using Heat Regenerator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Zan, Muhammad Zaeem Mohamad (2017) Performance Characterisric Improvement Of An Upscaled Gammatype Stirling Engine By Using Heat Regenerator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Zia, Ud Din (2018) Producer Gas Cleaning Process From Biomass Gasification And Its Impact On Solid Oxide Fuel Cells Performance. PhD thesis, Universiti Sains Malaysia. Zubir, Muhammad Syukri (2022) Effect Of Epoxy Materials And Gold Wire Number On Led Encapsulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zubir, Zulfahmi (2022) Bioelectricity Generation Of Glycerine Waste In Microbial Fuel Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zulkifili, Al Azim Faiz (2022) Design Of Kenaf Fiber Polymer Composite For Interior Car Door Panel Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zulkifli, Ahmad Fazlullah (2022) Finite Element Analysis Of Bending Delamination In Multilayer Circuit Boards PCBs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zulkifli, Aliff Danial (2018) Design Of Multi-Service Access Node (MSAN) Roadside Cabinet Battery Compartment Lock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zulkifli, Amirul Amri Mohd (2017) On Obtaining The First Impact Response Of Split Hopkinson Pressure Bar Apparatus. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted) Zulkifli, Zikri (2018) Design And Fabrication Of A Projectionlithography Machine For The Application Of Microfluidic Pattern Using Commercially Available UV LED. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) Zulkurnain, Amru (2018) Effect Of Thermal Energy On The Filling Time Of Composite Encapsulant Underfilling Process With Various Filler Loading Of Nano Silica Filler Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted) |
