Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ181-210 Mechanical movements"

Amiri, Pooya Lahijani (2014) Experimental And Kinetic Study On Co2 Catalytic Gasification Of Biomass Char Using Conventional And Microwave Heating. Masters thesis, Universiti Sains Malaysia.

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMC322 – Automatic Control [Kawalan Automatik] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EME 422 – Energy Conversion System [Sistem Penukaran Tenaga]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPM102 – Engineering Economy [Ekonomi Kejuruteraan] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Mohammud @ Mahmood, Mohd Mahadzir (2012) Enhancement Of Producer Gas Quality Through Co2 Absorption Using Cao-Sand Mixture In A Fluidized Bed Reactor. PhD thesis, Universiti Sains Malaysia.

A

Akhir, Maisara Azad Mat (2016) Development Of Nanostructured Gas Sensing Material As An Ethylene Gas Detector. Masters thesis, Universiti Sains Malaysia.

Aziz, Norhidayah Abdul (2018) Stress Analysis Of Stretchable Electronic Circuit. Masters thesis, Universiti Sains Malaysia.

C

Chan, Choon Kit (2016) 2d Human Motion Estimation Modeling For Classification. PhD thesis, Universiti Sains Malaysia.

H

Ho, Roger Zhen Yu (2018) Experimental And Numerical Analysis On The Cooling Performance Of Synthetic Jet At Low Reynolds Number. Masters thesis, Universiti Sains Malaysia.

M

Manap, Abdul Haadi Abdul (2016) Molecular Mechanics Simulations Of Quartz Etching Process. Masters thesis, Universiti Sains Malaysia.

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EME 432 – Internal Combustion Engine [Enjin Pembakaran Dalam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EME 442 – Biomechanics [Biomekanik]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMM 342 – Noise & Vibration [Hingar & Getaran] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPE442 – Advanced Semiconductor Manufacturing Technology [Teknologi Pembuatan Semikonduktor Termaju] Duration: 3 hours [Masa: 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPM 212 – Metrology and Quality Control [Metrologi dan Kawalan Kualiti] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPM322 – Industrial Engineering [Kejuruteraan Industri]Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPP212 – Advanced Manufacturing Technology [Teknologi Pembuatan Termaju]Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA KSCP Semester Examination Academic Session 2016/2017 August 2017 EMH 102 – Fluids Mechanics [Mekanik Bendalir] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA KSCP Semester Examination Academic Session 2016/2017 August 2017 EMH 211 – Thermodynamics [Termodinamik] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Appendix A. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMH 102 – Fluids Mechanics [Mekanik Bendalir]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMH 222 – Fluid Dynamics [Dinamik Bendalir]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMM 102 – Static [Statik]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMM 242 – Dynamic [Dinamik]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMT 212 – Computational Engineering [Kejuruteraan Pengkomputeran] Duration :3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EMT 302 – Mathematical Modelling In Engineering [Pemodelan Matematik Di Dalam Kejuruteraan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPE401 – Artificial Intelligence in Manufacturing [Kecerdikan Rekaan Dalam Pembuatan] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EPM 322 – Industrial Engineering [Kejuruteraan Industri] Duration : 3 hours Masa : 3 jam. [Teaching Resource] (Submitted)

Mekanik, Pusat Pengajian Kejuruteraan Mekanik (2018) Second Semester Examination Academic Session 2017/2018 May/June 2018 EME 452 – Tribology [Tribologi]. [Teaching Resource] (Submitted)

Mokhtar, Noorhafizah (2018) Simulation Of Blood Flow In Bi-Leaflet Mechanical Heart Valve. Masters thesis, Universiti Sains Malaysia.

N

Nashrudin, Muhammad Naqib (2018) Functionally Graded Niti Shape Memory Alloys By Ageing And Partial Annealing. Masters thesis, Universiti Sains Malaysia.

Nawawi, Nazihah (2014) Effect of Ni3Ti formation on the oxidation kinetics of NiTi shape memory alloys. Masters thesis, Universiti Sains Malaysia.

O

Ong Kean Aik, Kean Aik (2016) Experimental and Numerical Studies of Transient Heat Transfer in Electronics Packaging. PhD thesis, Universiti Sains Malaysia.

S

Said, Siti Haslinda Mohamed (2018) Disperse Phase Method Particle Study With Doped Nano-Particles In Sac305 Solder. Masters thesis, Universiti Sains Malaysia.

Subramonian, Sobana Raj (2015) Simulation On Atkinson-Miller Cycle Engine Of Four Stroke Two-Wheel Vehicle For Light Operating Condition. Masters thesis, Universiti Sains Malaysia.

T

Tan, Wan Ching (2018) Analysis And Performance Study Of Point-Absorber Wave Energy Converters Using Flow-3D_. Masters thesis, Universiti Sains Malaysia.

W

Woo, Wing Hon (2018) Development Of Moiré Fringe Recognition System Using Artificial Neural Network For 2-D Displacement Measurement. Masters thesis, Universiti Sains Malaysia.

Z

Zaki, Hafizah Hanim Mohd (2016) Formation Of Single Phase Niti Shape Memory Alloy Via Solid State Processing In Reducing Environment. PhD thesis, Universiti Sains Malaysia.