Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ1 Mechanical engineering and machinery"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | E | H | I | L | M | P | R | S | T | U | Y | Z
Number of items at this level: 107.

A

Abdullah, Ahmad Baharuddin and Shuib, Solehuddin (2007) Study On Design And Process Parameters Effect To The Development Of Optimal Die For Cold Forging Process. Project Report. Universiti Sains Malaysia.

Abdullah, S.J. and Ratnam, M.M. and Samad, Z. (2010) Focus Measure In A Liquid-Filled Diaphragm (LFD) Lens Using Passive Auto-Focus Method. In: 2010 11th. International Conference Control Automation, Robotics and Vision, 5-8th December 2010, Singapore.

Abdullah, Ahmad Baharuddin and Hasim, M.H and Mohd Ripin, Zaidi and Shuib, S (2005) Effect Of Design For Modularity Maintainability-A Premilary Study. In: Proceedings of the International Conference on Recent Advances in Mechanical & Materials Engineering, 30-31 May 2005, Kuala Lumpur, Malaysia.

Abdullah, Ahmad Baharuddin and Mohd Ripin, Zaidi and Mokhtar, M (2005) A Methodology To Evalute Design Efficiency Based On Assembly Criteria In Support Of Design For Modularity. Journal of IEM, 66 (1). pp. 34-40.

Abdullah, Ahmad Baharuddin and Samad, Amti and Mohd Ripin, Zaidi (2005) Kaedah Pengukuran Indek Keboleh-Selenggaraan Berdasarkan Rekabentuk Untuk Pemasangan (DFA)-Satu Kajian Kes. Jurnal Kejuruteraan, 17. ISSN 0128-0198

Abdullah, Ahmad Baharuddin and Yusoff, M. S. and Hasim, M.H and Shuib, S (2006) A Methodology To Determine Product Maintainability Based On Assembly Criteria - A Case Study Of Rear Matorcycle Brake Assembly. In: Decon 2006, Melaka.

Abdullah, Ahmad Baharuddin and Yusoff, M. S. and Mohd Ripin, Zaidi (2006) Integration Of Design For Modularity And Design For Assembly To Enhance Product Maintainability. In: International Conference on Manufacturing And Material processing , 14-16 March 2006, University Malaya.

Abdullah, M.Z. and Yusoff, H. and Mat Nawi, M.R. and Mansor, M.Z. and Mohd Ripin, Z. and Ahmad, R. (2006) Aerodynamic Analysis And Comparison Of Swallow And Pipette Bird. Working Paper. Universiti Sains Malaysia.

Abdullah, Mohd Zulkifly and Zainal Alauddin, Zainal Alimuddin and Seetharamu, K. N. and Idroas, Mohd Yusoff (2005) Experimental Investigation And Numerical Method Of Thermal Contact Resistance For Hard And Soft Materials. Project Report. Universiti Sains Malaysia.

Abdullah Aziz, Jalal and Aziz, Norashid and Chee, Hoong Phang (2004) Firing Of Limestone In JPN Pilot Plant. Working Paper. Universiti Sains Malaysia.

Ahmad, Rosmaini and Kamaruddin, Shahrul and Mokhtar, Mohzani and Almanar, Indra Putra (2006) The Application Of Preventive Replacement Strategy On Machine Component In Deteriorating Condition – A Case Study In The Processing Industries. In: International Conference on Man-Machine Systems (ICOMMS 2006), 15-16 September 2006, City Bayview Hotel, Langkawi, Malaysia.

Ahmad, Rosmaini and Kamaruddin, Shahrul and Mokthar, Mohzani and Almanar, Indra Putra (2006) Identifying the Best Fit Failure Distribution and the Parameters of Machine’s Component: A New Approach. In: International Conference on Man-Machine Systems (ICOMMS 2006), 15-16 September 2006, City Bayview Hotel, Langkawi, Malaysia.

Almanar, Prof.Madya Indra Putra and Mohd Ripin, Prof.Madya Zaidi and Abdullah, Prof.Madya M.Z. (2006) Feasibility Study Of Exploring Ultrasonic Flexural Wave As A Cooling Mechnism In Microelectronic Systems. Project Report. Universiti Sains Malaysia.

Ameen, Ahmadul and Hanan, H.L. and Ong, W.L. and Lee, K.O. (2005) An Investigation Into The Drying Of Malaysian Timbers. Working Paper. Universiti Sains Malaysia.

E

E, P Chiang and Bawadi, M A and Aswatha Narayana, P A and Zainal, Z.A. and Seetharamu, K N (2003) Wind Characteristics Influencing Wind Energy. In: 2nd Regional Conference On Energy Technology Towards A Clean Environment, 12-14 February 2003, Phuket Thailand.

H

Hj Abdul Azid, Assoc. Prof. Dr Ishak and Seetharamu, Prof. K.N. and Abdul Quadir, Assoc. Prof. Dr Ghulam (2002) Computational Methods In Flip Chip Assembly. Project Report. Universiti Sains Malaysia.

Hj Abdul Azid, Assoc. Prof. Dr Ishak and Seetharamu, Prof. K.N. and Abdul Quadir, Assoc. Prof. Dr Ghulam (2005) Mold Flow FEA Simulation Software Development. Project Report. Universiti Sains Malaysia.

Hj Abdul Azid, Assoc. Prof. Dr Ishak and Seetharamu, Prof. K.N. and Ahmad, Prof. Dr. Abdul Latif and Mohd Ripin, Prof.Madya Zaidi (2000) Controlling The Emission Of Pollution From The Boiler Of Palm Oil Mill By Using Neural Network And Genetic Algorithm. Pengawalan Pencemar Pencemar Udara Dari Dandang Kelapa Sawit Dengan Menggunakan Rangkaian Neural Dan Algoritma Genetik. Project Report. Universiti Sains Malaysia.

I

Idroas, M.Y. and Miskam, M.A. and Zainal, Z. A. and Mustafa, K.F. (2004) Thermal Analysis Of Solid Waste Gasifier-combustor. In: TA Conference 2004, 2004.

L

Lee, Kor Oon and Arunasalam, Parthiban and Ong, Kang Eu and Quadir, G. A. and Seetharamu, K. N. and Aswatha Narayana, P. A. and Abdullah, M. Z. and Azid, I. A. and Zainal Alauddin, Z. A. Optimization Of Thermodynamic Cycles For Gas Turbines Using Genetic Algorithms. Working Paper. Universiti Sains Malaysia.

M

Miskam, M.A. and Idroas, M.Y. and Alauddin, Z.A.Z. and Mustafa, K.F. (2004) Pre-Feasibility Study On The Effect Of The Gas Temperature To The Ash Separation Of Sawdust Gasification In Cyclone Gasifier. In: TA Conference 2004, 2004.

Miskam, M.A. and Idroas, M.Y. and Alauddin, Z.A.Z. and Mustafa, K.F. (2004) A Review Of Design Basis For Cyclone Gasification Of Sawdust. Working Paper. Universiti Sains Malaysia.

Miskam, M.A. and ldroas, M.Y. and Alauddin, Z.A.Z. and Mustafa, K.F. Fundamentals Of Cyclone Gasification Process And Operation. In: 3rd National Technical Postgraduate Symposium.

Miskam, Muhammad Azman and Zainal Alauddin, Prof. Madya Hj Zainal Alimuddin and Idroas, Mohd Yusof and Mustafa, Khairil Faizi (2005) Design And Fabrication Of Cyclone Gasifier System. Project Report. Universiti Sains Malaysia.

Mohd Ripin, Prof.Madya Zaidi (2006) Analysis Of Drum Brake Vibration Using Multibody Dynamics Approach With Explicit Finite Element Method. Project Report. Universiti Sains Malaysia.

Mustafa, K F and H W, Gitano-Briggs (2008) Effect Of Variation In Liquefied Petroleum Gas (LPG) Proportions In Spark Ignition Engine Emissions. In: International Conference on Environment 2008 (ICENV 2008): Environmental Management On Technology Towards Sustainable Development, 15 – 17 December 2008, G Hotel Penang,Malaysia.

Mustafa, Shaliza Azreen (2007) Aplikasi Ergonomik Dalam Sistem Kerja Untuk Kesejahteraan Motivasi Pekerja Menggunakan Terminal Paparan Visual. Masters thesis, Universiti Sains Malaysia.

P

PPJJ, Pusat Pengajian Jarak Jauh (2005) JIF 211 - MEKANIK 05. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2005) JIF 211 - MEKANIK MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 232 - SISTEM MEKATRONIK MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 251 - REKABENTUK MEKATRONIK I MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 351 - REKABENTUK MEKATRONIK II MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik EMK 320 - MEKANIK PEPEJAL II JUN 1994. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1994) EMK 320 - MEKANIK PEPEJAL II JUN 1994. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1994) EMK 351 - GETARAN MEKANIK DAN KAWALAN AUTOMATIK OKT-NOV 1994. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1994) EMK 401 - PEMINDAHAN HABA DAN JISIM OKT-NOV 1994. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (1994) EMU 212 - JURUTERA DALAM MASYARAKAT I JUN 1994. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1992) ATP 204 - PENGURUSAN PENGELUARAN JUN 1992. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1995) ATP 204 - PENGURUSAN PENGELUARAN JUN 1995. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMC311-3 - MECHATRONICS NOVEMBER 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1990) EMG 140-3 TEKNOLOGI PEMBUATAN I MAC APR 1990. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH 331(4) - FINITE ELEMENT METHOD IN MECHANICAL ENGINEERING APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMH 331(4) - KAEDAH UNSUR TERHINGGA DALAM KEJURUTERAAN MEKANIK APR-MEI 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMH 331E(4) - FINITE ELEMENT METHOD IN MECHANICAL ENGINEERING APRIL 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH 462E(3) - ENERGY CONVERSION SYSTEM APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH102-3 - FLUIDS MECHANICS JUN 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH211-3 - THERMODYNAMICS JUN 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH311-3 - APPLIED THERMODYNAMICS NOVEMBER 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMH331-4 - FINITE ELEMENT METHODS IN MECHANICAL ENGINEERING JUN 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1990) EMK 110-3 MEKANIK BENDALIR 1 JUN 1990. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1990) EMK 110-3 MEKANIK BENDALIR I MAC APR 1990. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1997) EMK 130 - KEJURUTERAAN MEKANIK SEPT 1997. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1990) EMK 130-3 MEKANIK KEJURUTERAAN JUN 1990. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1995) EMK 421 - ANALISIS TEGASAN APRIL 1995. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1997) EMK 421 - ANALISIS TEGASAN APRIL 1997. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1993) EMK 431 - GETARAN DALAM MESIN INDUSTRI APRIL 1993. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1995) EMK 431 - GETARAN DALAM MESIN INDUSTRI APRIL 1995. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 101(3) - MECHANICAL ENGINEERING OCT-NOV 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 101(3) - MEKANIK KEJURUTERAAN JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2004) EMM 101(3) - MEKANIK KEJURUTERAAN OKT 04. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMM 101(3) - MEKANIK KEJURUTERAAN OKT-NOV 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM 111(3) - STATICS APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 111(3) - STATIK JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMM 201(3) - MEKATRONIK OKT-NOV 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 201(4) - MECHATRONICS OCT-NOV 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2004) EMM 201(4) - MEKATRONIK OKT 04. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2004) EMM 211(3) - MEKATRONIK OKT 04. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMM 211(3) - MEKATRONIK OKT-NOV 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 212(4) - DINAMIK & MEKANISMA APRIL 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 212(4) - DINAMIK & MEKANISMA JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2003) EMM 212(4) - DINAMIK DAN MEKANISMA FEB-MAC 03. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EMM 212(4) - DINAMIK DAN MEKANISME APR-MEI 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM 212(4)- DYNAMICS & MECHANISMS APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM 322(3) - NOISE & VIBRATION APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EMM 322E(3)-NOISE AND VIBRATION JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM 401-3 - INSTRUMENTATIONS SYSTEM (SISTEM PERALATAN)NOV 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM101-3 - ENGINEERING MECHANICS NOVEMBER 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EMM111-3 - STATIC JUN 2008. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (1990) EMU 211-2 PENGURUSAN PERINDUSTRIAN MAC APR 1990. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPD 422(3) - MANUFACTURING SYSTEMS DESIGN APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EPD 422(3) - REKABENTUK SISTEM PEMBUATAN JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPM 102(2) - ENGINEERING ECONOMY APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPM 212(4) - METROLOGY AND QUALITY CONTROL APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPM 322(3) - INDUSTRIAL ENGINEERING APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPM 332(3) - QUALITY AND RELIABILITY APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPM 372(3) - ENGINEERING MANAGEMENT II APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EPM 372E(3) - PENGURUSAN KEJURUTERAAN II JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPP 321(3) - ADVANCED MANUFACTURING TECHNOLOGY APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPP 332-3 - ADVANCED MANUFACTURING PROCESSES APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2008) EPP 362(3) - INDUSTRIAL MACHINE VISION APRIL 08. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EPP 362E(3) - INDUSTRIAL MACHINE VISION APRIL 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2006) EPP 362E(3) - INDUSTRIAL MACHINE VISION APRIL-MEI 06. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2007) EPP 362E(3) - INDUSTRIAL MACHINE VISION JUN 07. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) Kaedah Pengukuran Indek Kebolehansenggaraan Produk Atau Sistem Kriteria Pemasangan. Jurnal Teknologi, 42 (A). pp. 91-106. ISSN 0127-9696 (Submitted)

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2003) Sifat-Sifat Asas Dan Kualiti Kayu Sentang (Azadirachta Excelsa) Pada Umur Yang Berbeza [QK495.M52 T158 2003 frb]. Masters thesis, Universiti Sains Malaysia.

R

Ratnam, Dr. Mani Maran and Lim, Chee Peng (Assoc. Prof. Dr.) and Samad, Dr. Zahurin (2005) Automatic Detection OF Multiple Defects In Weld Radiography. Project Report. USM.

Ratnam, Dr. Mani Maran and Shawkataly, Assoc. Prof. Dr. Abdul Khalil and Abd. Azid, Assoc. Prof. Dr. lshak (2005) Design Of Natural Fiber-Reinforced Composites Pallets. Project Report. USM.

Razali, Assoc. Prof. Dr: Radzuan (2007) Design And Failure Analysis Of A Compliant Wing. Project Report. Universiti Sains Malaysia.

Retnasamy, V and Ratnam, Mani Maran and Sundaraj, K and Sauli, Zaliman (2007) Tilt Detection Of Connectors Using Phase Shifting. In: Proceedings Of The Third IASTED International Conference On Advances In Computer Science And Technology , 2-4 April 2007, Phuket, Thailand .

S

Salman, M and Mansor, A Free-Form Surface Models Generation Using Reverse Engineering Technique-An Investigation. Project Report. Universiti Sains Malaysia.

Shariffuddin, Shafizan and Abdullah, Ahmad Baharuddin and Shuib, S (2005) Kesan Pemodularan KeAtas Interasi Dan Konfugarasi Komponen-Satu Kaian Ilmiah. In: National Seminar on Advanced Processes and Systems in Manufacturing (APSIM) 2005, 17-18 May 2005.

T

Ting, Ming Chung and Saad, Abdul Yamin (2008) Recuperative Energy Potential From A Typical Landfill In Malaysia. In: International Conference on Environment 2008 (ICENV 2008): Environmental Management On Technology Towards Sustainable Development, 15 – 17 December 2008, G Hotel Penang,Malaysia.

Tuan Habib, Syarifah Nor Farihah and Saad, Abdul Yamin (2008) Environmental Ranking Considerations For Setting Up A Recuperative Energy Incinerator. In: International Conference on Environment 2008 (ICENV 2008): Environmental Management On Technology Towards Sustainable Development, 15 – 17 December 2008, G Hotel Penang,Malaysia.

U

Umar, Alias and Mohd Ripin, Zaidi and Abdullah, Ahmad Baharuddin (2005) An Approach To Platform Design Using Design And Performance parameters Interactions. In: International Conference On Recent Advances Materials And Mechinical Engineering , 30-31 May 2005.

Umar, Alias and Mohd Ripin, Zaidi and Abdullah, Ahmad Baharuddin (2005) Pendekatan Modular Dalam Penentuan Platform Berdasarkan Integrasi Parameter Rekabentuk Dan Prestasi. In: National Seminar on Advanced Processes and Systems in Manufacturing (APSIM) 2005, 17-18 May 2005.

Y

Yusoff, H. and Mansor, M.Z. and Mat Nawi, M.R. and Abdullah, M.Z. and Mohd Ripin, Z. and Ahmad, R. (2006) Aerodynamic Performance Of Swallow Bird. Working Paper. Universiti Sains Malaysia.

Z

Zainal Alaudin, Prof. Madya Dr. Hj. Zainal Alimuddin and Ahmad, Noor Hisyam (2004) Pembangunan Penggas Siklon Untuk Habuk Kayu (DEVELOPMENT OF CYCLONE GASIFIER FOR SAWDUST). Project Report. Universiti Sains Malaysia.

This list was generated on Sat Nov 1 09:55:28 2014 MYT.
Share