Experimental And Numerical Studies Of Transient Heat Transfer In Electronics Packaging

Ong, Kean Aik (2017) Experimental And Numerical Studies Of Transient Heat Transfer In Electronics Packaging. PhD thesis, Universiti Sains Malaysia.

[img]
Preview
PDF - Submitted Version
Available under License Creative Commons Attribution.

Download (981Kb) | Preview

    Abstract

    The demand for mobile and tablet devices is at all time high for the last decade, overwhelming attention has been paid to this field, the novelty studies that needed in industry to accompany this demand is to characterize the steady state and transient studies for satisfactory thermal performance on these devices, and ensuring reasonable thermal qualification time for chip and better production outputs. The part one of this study presents the steady state forced air thermal simulations with the attachment of heat spreader for various die power conditions (0.5W to 2.0W), the steady state thermal model has successfully been developed and optimized, and thermal contour for each die power was demonstrated. The simulated thermal model at steady state has been verified by thermocouple-measured junction temperature, with the maximum percentage difference at 6.02% only; the verified thermal model has been extended to characterize the thermal impacts of the various air flows on the resistance from die to the ambient. It utilizes heat path resistance network and simulation in a holistic manner for accurate thermal analysis. The results show that the heat path resistance from die to ambient is a function of air flow but not the die power, higher air flow will reduce the thermal resistance from die to ambient, and for this study the minimum thermal resistance obtained at 5.90C/W for maximum air flow. The part two of this study has been extended to transient heat transfer simulation, with the intention to understand what is the auxiliary heat source that required for the junction temperature to achieve 700C at transient mode? The auxiliary heat source is

    Item Type: Thesis (PhD)
    Subjects: T Technology > TJ Mechanical engineering and machinery > TJ1 Mechanical engineering and machinery
    Divisions: Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Thesis
    Depositing User: Mr Mohd Fadli Abd Rahman
    Date Deposited: 08 Sep 2017 15:59
    Last Modified: 08 Sep 2017 15:59
    URI: http://eprints.usm.my/id/eprint/36421

    Actions (login required)

    View Item
    Share