Items where Subject is "T Technology > T Technology (General)"

Article

Abd Razak, Dzulkifli (2009) Craving freedom, we become slaves. New Sunday Times.

Abd Razak, Dzulkifli (2009) Innovation the way forward. New Sunday Times.

Abd Razak, Dzulkifli (2009) MY SAY: Innovation through a larger network. The Edge Malaysia.

Abd Razak, Dzulkifli (2009) MY SAY: The harsh world of innovation. The Edge Malaysia.

Abd Razak, Dzulkifli (2010) MY SAY: We don't know that we don't know. The Edge.

Abdullah, Ahmad Zuhairi and Bakar, M Zailani Abu and Bhatia, Subhash (2006) Activity And Deactivation Of Cr-Cu/modified ZSM-5 Catalyst In The Combustion Of Chlorinated VOC Pollutants In Air. Journal of industrial technology . ISSN 0128-4940 (In Press)

Abdullah, Ahmad Zuhairi and Bakar, M Zailani Abu and Bhatia, Subhash (2006) Catalytic Combustion Of VOC In Air Stream Over Bimetallic Chromium Copper Supported On SICL4-Modified H-ZSM-5 Catalyst. IIUM Engineering Journal, 7 (1). pp. 37-46.

CETREE, Pusat Pendidikan dan Latihan Tenaga Boleh Baharu, Kecekapan Tenaga dan Teknologi Hijau (2011) 1 Hijau 1 Komuniti Dan Pelancaran Jelajah Teknologi Hijau. Berita@Cetree.

CETREE, Pusat Pendidikan dan Latihan Tenaga Boleh Baharu, Kecekapan Tenaga dan Teknologi Hijau (2016) Kerjasama Bahagian Pembangunan Kurikulum (Bpk) Kementerian Pendidikan Malaysia Bersama Cetree&Gt Berkaitan Teknologi Hijau Untuk Diimplementasikan Dalam Sektor Pendidikan Di Malaysia. Berita@Cetree.

Nik Norulaini, Nik Norulaini and Ahmad Zuhair, Ahmad Zuhair and Muhamad Hakimi, Muhamad Hakimi and Mohd Omar, Mohd Omar (2001) Chemical Coagulation Of Setileable Solid-Free Palm Oil Mill Effluent (Pome) For Organic Load Reduction. Journal of Industrial Technology, 10 (1). pp. 55-72.

Ramayah, T. and Nejati, Mehran and Shafaei, Azadeh (2015) Modelling predictors of blog stickiness and retention by university students. Malaysian Journal of Library & Information Science, 20 (3). pp. 15-27.

Monograph

Abdul Latif, Muhammad Aadam (2018) Development Of Generator Circuit For Electron Temperature And Density Probe (Tenep) For Mysat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ahmad, Mardiana Idayu (2014) Fundamental study in the heat and mass transfer of a membrane-based energy recovery for building applications. Project Report. Universiti Sains Malaysia. (Submitted)

Ahmad Yusni, Amira Syuhadah (2018) Inspection Of Drill Bit Point Angle Using Image Processing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ahmad Zahiri, Saifulmajdy (2018) Development Of Natural Fiber Reinforced Composite Prepreg. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Akashah, Muhammad Amirul (2017) Productivity Of Construction Projects With Industrialized Building System (IBS) Technology Adoption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aminuddin, Mukhlisin (2018) Effect Of Fibre Orientation On The Mechanical Properties Of Sandwich Composite Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ayub, Khairul Rahmah and Ab. Ghani, Aminuddin and Leow , Cheng Siang and Shaharuddin, Syafiq Shaharuddin and Yusof, Mohd Fazly (2016) Feasibility and Practicality Of Green Roof For Stormwater Management in Malaysia. Project Report. Universiti Sains Malaysia. (Submitted)

Chia, Pei Kiak (2018) Hardware And Software Development Of ECG Biometric System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Chu, Yin Yeng (2017) Finite Element Simulation Of Laser Welding Of Tailor Welded Blank On Different Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fadzil, Nurul Farahanes Mohd Evaluation Of Tannin As Natural Coagulant For Pulp And Paper Mill Wastewater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Unpublished)

Foo, Chun Yit (2019) The Effects Of Lubrication On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ghazali, Arniza (2015) Oil palm biomass alkaline peroxide diversified pulp: mapping of Quality to application by degree of chromophorisation. Project Report. Universiti Sains Malaysia. (Submitted)

Hanafiah, Amir Hamzah M. (2019) Application Of Autonomous Maintenance To Reduce Failure Rate Of Bearings In Food Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ibrahim, Mahamad Hakimi (2007) Ambients Air Quality Monitoring In The state of Penang (2004). Project Report. Universiti Sains Malaysia.

Ismail, Norli (2015) Mechanism of solar radiation in retarding the bioactivity of pharmaceutical active Compounds (PhAs). Project Report. Universiti Sains Malaysia. (Submitted)

Kee, Seow Pei (2019) Brovey Transform Based Image Fusion For Impurities Segmentation And Detection On Edible Bird’s Nest. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Koay, Tze Yen (2018) Effect Of Cryogenic Treatment Prior To Equal Channel Angular Press (ECAP) Of Sac Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, Lai Kuan (2016) Disaster relief and preparedness: Nutritionally-balanced, cost effective, socially acceptable and sustainable emergency food aid design: A vital strategy for disaster abatement. Project Report. Universiti Sains Malaysia. (Submitted)

Lee, Mei Wen (2017) Stress Analysis Of Stretchable Thermal Sensor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Leow, Yoong Yang (2018) State-Of-Health Prediction Integrated With State-Of-Charge Monitoring Of A Lithium-Ion Battery Cell For Lifetime Prediction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Elektrik dan Elektronik. (Submitted)

Lim, Shu Bee (2017) Preparation, Characterization And Properties Of Epoxy Particles Filled Epoxy Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Megat, Nik Muhammad Ashraf Che (2019) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mohamad Tajudin, Nizar Alwi (2006) Performance Of GPS For Road Network Mapping And Analyzing Vehicle Position. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Suhaila (2021) Physical, Chemical Properties, And Effect Of Storage Condition On Antioxidant Activity Of An Instant Blue Drink From Butterfly Pea Flowers (Clitoria Ternatea). Project Report. Universiti Sains Malaysia. (Submitted)

Mohammed Kassim, Mohammed Zul Azeem (2018) The Effect Of Thickness Reduction On Microstructure And Mechanical Propertiesof Cold Rolled And Cryorolled Low Carbon Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Wei Quan (2018) Experimental Study On The Performance Of Vertical Axis Hydrokinetic Turbine In Realistic Stream Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Ramadass, Sureswaran (2007) Big Picture Codec for Multimedia Conferencing System. Project Report. Universiti Sains Malaysia.

Razali, Sali Amirah (2018) Study On Mechanical And Thermal Properties Of Fired Clay Brick From Five Different States In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sim, Chiow Moon (2018) Development Of The USM Wind Tunnel Validation Model For Calibration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Tajarudin, Husnul Azan (2017) Metabolism of municipal solid waste (msw) leachate for acetic and butyric acid conversion by C.Butyricum. Project Report. Universiti Sains Malaysia. (Submitted)

Wahab, Abdul Aniq Aqil Abd (2021) Global Path Planning For Solar-Powered Uav. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Zainul, Abdul Rahman (2017) Post-Fire Compression Properties Of Sandwich Composite Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Aeroangkasa. (Submitted)

Conference or Workshop Item

Ariffin, Fazilah and Mohd Noor, Azemi and A.H, Noor Haliza (2006) Development Of Hemicelluloses Biodegradable Films From Oil Palm Frond (Elais Guineensis). In: International Conference On Green and Sustainable Innovation "Integrated Approaches for Sustainable Society", November 29th - December 1st, 2006, Chiang Mai, Thailand.

Ismail, Norli and Ho, Chew Meng and Ling, Y.L. (2006) Anaerobic Digestion Of Mixed Chemical Pulping And Palm Oil Mill Effluent In Suspended Growth Anaerobic Digester. In: International Conference on Green and Sustainable Innovation " Integrated Approaches for Sustainable Society", November 29th - December 1st, 2006, Chiang Mai, Thailand.

Thesis

Ahmad, Nor Amalini (2015) Properties Of Edible Films Prepared From Fish Skin Gelatin Added With Different Fatty Acids And Their Sucrose Esters. Masters thesis, Universiti Sains Malaysia.

Al-Shalabi, Mohammed Abdel Lateif (2018) Enhanced Technique For Maximizing Wireless Sensor Networks Lifetime Based On Utilizing The Phenomena Of Overlapping Nodes And Data Transmission. PhD thesis, Universiti Sains Malaysia.

Alhalabi, Huda A. H. (2019) Multi-Hop Selective Constructive Interference Flooding Protocol For Wireless Sensor Networks. PhD thesis, Universiti Sains Malaysia.

Ang , Lily Zuin Ping (2016) Evaluation And Comparison On Chemical Components, Antioxidant, Antimicrobial, And Antidiabetes Activities From Selectedtropical Plants. PhD thesis, Universiti Sains Malaysia.

Annamalai, Nithyanan (2019) Molecular Dynamics Simulation Of Polyhydroxyalkanoate Synthase From Chromobacterium Sp. Usm2. Masters thesis, Universiti Sains Malaysia.

Aziz, Nurhanim Abdul (2018) Removal Of Sulphate In Waste Recycle Aggregate Using Bacillus Subtilis. PhD thesis, Universiti Sains Malaysia.

Baharom, Siti Zawiyah (2017) Activated Carbon From Longan Seed And Pistachios Shell Prepared Via Microwave Irradiated For Dye Removal. Masters thesis, Universiti Sains Malaysia.

Cheng , Yueh Fang (2015) Utilization Of Jering (Pithecellobium Jiringa Jack) Seed Flour For New Food Product Development. Masters thesis, Universiti Sains Malaysia.

Chong, Eunice Wan Ni (2021) Biodegradable Seaweed-Based Composite Films Incorporated With Calcium Carbonate Generated By Bacillus Sphaericus. PhD thesis, Perpustakaan Hamzah Sendut.

Embrandiri, Asha (2016) Effects Of Oil Palm Decanter Cake On Growth Of Selected Vegetables. PhD thesis, Universiti Sains Malaysia.

Ghani, Fitriah Abdul (2018) Effect Of Zn Addition On Microstructure, Intermetallic Compound Formation And Mechanical Properties Of Sn-0.7cu Solder On Cu Substrate. Masters thesis, Universiti Sains Malaysia.

Goh, Kim Huat (2020) Total Factor Productivity Analysis Of The Water Services Industry In Malaysia. Masters thesis, Perpustakaan Hamzah Sendut.

Hamid, Zubaidah Aimi Abdul (2011) Analysis of sap sugar and starch content of felled oil palm trunks at different storage time. Masters thesis, Universiti Sains Malaysia.

Hj Latip, Dayang Norlaila (2016) Microencapsulation Of Folic Acid Using Hydrolyzed Collagen By Conventional And Ultrasonic Spray Drying Method. Masters thesis, Universiti Sains Malaysia.

Ilias, Muhammad Khalish Mohammad (2022) A Comprehensive Study On Microbial Activity And Lipids Extraction From Chicken By-Product Waste Via Supercritical Carbon Dioxide For Biodiesel Production. Masters thesis, Perpustakaan Hamzah Sendut.

Koay , Ley Yee (2008) Pembalkan Delignifikasi Oksigen Dengan Pra-Rawatan Asidik Bagi Pulpa Soda-Aq Tandan Kosong Kelapa Sawit. Masters thesis, Universiti Sains Malaysia.

Lim, Ting Jin (2010) Physical Development And Physicochemical Characterization Of A Soy-Based Cream Cheese. Masters thesis, Universiti Sains Malaysia.

Loo, Milly Mei Li (2010) Production Of Cellulose Acetate : Effect Of Pretreatments And Acetylation Conditions On Recycled Paper Dust. Masters thesis, Universiti Sains Malaysia.

Maniam, Balamurali (2015) Thermal And Flicker Noise Analysis In Sample And Hold Circuit. Masters thesis, Universiti Sains Malaysia.

Mayeh, Moein (2013) Factors Influencing Intention To Use Tax E-Filing Systems: A Study On Taxpayers In West Malaysia. Masters thesis, Universiti Sains Malaysia.

Md Sani, Nur Ariffah (2015) Development Of Ternary Ni-Ag-P And Ni-Cu-P Using Electroless Coating On Copper Substrate. Masters thesis, Universiti Sains Malaysia.

Nik Muhammad@Mohd, Nik Aisyah (2015) Effect Of Various Acid Pretreatment On Physicochemical Properties And Sensory Profile Of Duck Feet Gelatine And Application In Surimi. Masters thesis, Universiti Sains Malaysia.

Ranjanthran, Mageswari (2018) The Effects Of Environmental Quality On Revisit Intention Among European Tourists To Malaysia. PhD thesis, Universiti Sains Malaysia.

Razali, Mohd Zulhairie (2015) Characterization Of Crosslinked Sodium Trimetaphosphate Starch From Oil Palm Trunk And Its Suitability As Particleboard Binder. Masters thesis, Universiti Sains Malaysia.

Saad, Hisham Haider Yusef (2018) New Structural Evolving Algorithms For Fuzzy Systems. PhD thesis, Universiti Sains Malaysia.

Saary, Nur Syahirah (2011) Determination Of 2-Pyrone-4, 6-Decarboxylic Acid Precurors From Oil Palm Tree Using Different Extraction Process. Masters thesis, Universiti Sains Malaysia.

Saleh, Sabiha Hanim (2010) Effect Of Hydrothermal Treatment On The Extractability And Digestibility Of Oil Palm (Elaeis Guineensis Jacq.) Fronds Derived Hemicellulose. PhD thesis, Universiti Sains Malaysia.

Samsudin, Mohd Nizam (2015) Assessing The Electronic Manufacturing Industry Suppliers Readiness Towards Green Technology Implementation. Masters thesis, Universiti Sains Malaysia.

Sarji, Noor Liyana (2016) Accumulation Characteristics Of Centella Asiatica L. As A Potential Cd-hyperaccumulator In Soil. Masters thesis, Universiti Sains Malaysia.

Shuib, Nor Shifa (2011) Physical and mechanical properties of extracted wood of tectona grandis and antifungal test of the extractive with phanerochaete chrysosporium. Masters thesis, Universiti Sains Malaysia.

Sim , Yi Jing (2015) Control Of Toxin-Producing Cyanobacterial Population Using Selected Agricultural Wastes. Masters thesis, Universiti Sains Malaysia.

Singh, Amar (2010) Development Of An Audit Protocol For The Investigation Of A Contaminated Site. PhD thesis, Universiti Sains Malaysia.

Tan , Sze Jack (2015) Extraction, Bioactivities And Identification Of Water-Soluble Phytochemicals From Lotus (Nelumbo Nucifera) Rhizome Of Malaysia And China Cultivars. Masters thesis, Universiti Sains Malaysia.

Utra, Uthumporn (2010) Hydrolysis Of Starch Below Gelatinization Temperature Using An Amylolytic Enzyme. PhD thesis, Universiti Sains Malaysia.

Wong, Chiang Ann (2018) Indoor Air Quality And Potential Health Risks In The Food Refinery In The Hot-Humid Tropics. Masters thesis, Universiti Sains Malaysia.

Yaacof, Nurashikin (2017) The Establishment Of Setback Distance For Malodour Mitigation From Palm Oil Mill. PhD thesis, Universiti Sains Malaysia.

Yew , Siew Chuen (2010) Physico-Chemical And Sensory Characteristics Of Muffin Substituted With Different Levels Of Mango Pulp Flour. Masters thesis, Universiti Sains Malaysia.

Zaki, Junaiza Ahmad (2010) Sifat-Sifat Anatomi Dan Kimia Kayu Getah Juvenil (Hevea Brasiliensis) Klon Lateks Balak Rrim 2009 Dan Rrim 2024. Masters thesis, Universiti Sains Malaysia.

Zubair, Ahmad Faiz (2019) Development Of Generative Computer-Aided Process Planning System For Lathe Machining. PhD thesis, Universiti Sains Malaysia.

Zwain, Haider Mohammed Naima (2016) Treatment Of Recycled Paper Mill Effluent Using Modified Anaerobic Inclining-Baffled Reactor. PhD thesis, Universiti Sains Malaysia.

Image

Universiti Sains Malaysia, Perpustakaan Hamzah Sendut (1983) Lawatan DYMM Seri Paduka Baginda Yang Di Pertuan Agong Ke USM, Februari 1983. III (AGONG 1983/108). [Image]

Teaching Resource

Bahan Sumber Mineral, Pusat Pengajian Kejuruteraan (2021) EBP 204/3 – Elastomeric Materials [Bahan Elastomer] Duration : 3 hours. [Teaching Resource] (Submitted)

PPJJ, Pusat Pengajian Jarak Jauh (2003) JAS 351(3) - TEORI STRUKTUR II APRIL 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2005) JIF 418 - SEMIKONDUKTOR DAN PERANTI MAC 05. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2005) JIM 316 - PENGANTAR PENYELIDIKAN OPERASI MAC 05. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JIM 416 - REKA BENTUK & ANALISIS FEB-MAC 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JNK 231/3 - MEKANIK MESIN FEB 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JUM 221/3 - KEBARANGKALIAN DAN STATISTIK GUNAAN FEB 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JUP 201/3 - PENGURUSAN KEJURUTERAAN I FEB 03. [Teaching Resource]

PPJJ, Pusat Pengajian Jarak Jauh (2003) JUP 212/3 - JURUTERA DALAM MASYARAKAT FEB 03. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAG 345-2 - ANALISIS GEOTEKNIK OKTOBER 04. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAK 463-2 - PENDERIAAN JAUH OKTOBER 04. [Teaching Resource]

PPKAW, Pusat Pengajian Kejuruteraan Awam (2004) EAS253E-3 - THEORY OF STRUCTURES OKTOBER 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 160-3 KIMIA FIZIKAL BAHAN KEJURUTERAAN MEI 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 210E KAWALAN PROSES FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 212-4 - BAHAN MENTAH & SERAMIK STURKTUR NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 215E BAHAN SEMIKONDUKTOR FEB 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 222-4 METALURGI FIZIKAL OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 324- BAHAN TERMAJU & KOMPOSIT APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBB 324- BAHAN TERMAJU & KOMPOSIT FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 324-4 BAHAN TERMAJU DAN KOMPOSIT APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 399-2 - KESELAMATAN & KESIHATAN PEKERJAAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 406-3 PEMILIHAN BAHAN APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 424 E-3 - SEMICONDUCTOR DEVICES & OPTOELEKTRONIC NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 425-3 REKABENTUK & PEMBANGUNAN BARANGAN SERAMIK APR-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 425-3 REKABENTUK & PEMBANGUNAN BARANGAN SERAMIK APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBB 443 - SERAMIK TEKNIKAL OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 443-4 SERAMIK TEKNIKAL OCT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBB 443-4 SERAMIK TEKNIKAL OCT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 443-4 SERAMIK TEKNIKAL MEI 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBB 524-3 - BAHAN KOMPOSIT NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBP 303-3 - BAHAN PLASTIK NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 308-3 KEJURUTERAAN PENGANGKUTAN BAHAN APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 308-3 KEJURUTERAAN PENGANGKUTAN BAHAN APRIL-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 322 PHYSICAL MINERAL PROCESSING OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 322-3 PEMPROSESAN FIZIKAL MINERAL OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 329-3 ENGINEERING GEOPHYSICS APRIL-MAY 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBS 339 EKONOMI MINERAL FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 339-3 EKONOMI MINERAL APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 339-3 EKONOMI MINERAL APRIL MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 339-3 MINERAL ECONOMICS APRIL MEI 06. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 322 - PERHUBUNGAN MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 442 - RANGKAIAN KOMPUTER NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 443 - PEMROSESAN ISYARAT DIGIT NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 510 - ADVANCED ANALOGUE CIRCUIT DESIGN NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 512- ADVANCED DIGITAL SIGNAL AND IMAGE PROCESSING NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 520 - EMBEDDED MICROPROCESSOR SYSTEM NOV 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE-453 - REKABENTUK SISTEM KAWALAN NOV 2005. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 231 - PEMACU DAN PENGGERAK MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEM 332 - TEORI REKABENTUK UJIKAJI MAC 05. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik (2005) EEE 436 - PERHUBUNGAN DIGIT NOV 05. [Teaching Resource]

PPKK, Pusat Pengajian Kejuruteraan Kimia (2003) EKC 211 - OPERASI PEMINDAHAN JISIM I FEB-MAC 03. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal EPP 201 MANUFACTURING TECHNOLOGY I (DEC 2015). [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 321(3) -TEKNOLOGI PEMBUATAN TERMAJU NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 332(3) - PROSES PEMBUATAN TERMAJU MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2003) EPP 362(3) - PENGLIHATAN MESIN INDUSTRI FEB-MAC 03. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 362E(3) - PENGLIHATAN MESIN INDUSTRI MAC 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 441(3) - PEMBUATAN TERSEPADU KOMPUTER NOV 05. [Teaching Resource]

PPKM, Pusat Pengajian Kejuruteraan Mekanikal (2005) EPP 451(3) -ROBOTIK DAN AUTOMASI NOV 05. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RAG 322 - SAINS PERSEKITARAN 2 FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RAK 343 - KAJIAN PERUMAHAN FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RDG 335 -ERGONOMIK SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) REG 261- PERKHIDMATAN BANGUNAN FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) REG 264E - INTRODUCTION TO INFORMATION TECHNOLOGY FEB 03. PENGANTAR TEKNOLOGI MAKLUMAT. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) REG 531 - SISTEM DAN REKABENTUK STRUKTUR SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) REG 561 - TEKNOLOGI PEMBINAAN DAN TEKNOLOGI BAHAN SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RET 563 - SISTEM PENGAUTOMATAN BANGUNAN 1 FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RET 563 - SISTEM PENGAUTOMATAN BANGUNAN 1 FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RET 564 - SISTEM PENGAUTOMATAN BANGUNAN 2 FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RHS 501- PERUMAHAN DAN ASPEK SOSIO-EKONOMI SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RHS 505 - UNDANG-UNDANG DAN PERUMAHAN FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RHS 506 - KAEDAH ANALISIS PERUMAHAN FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RLD 505 - TEORI DAN FALSAFAH REKA BENTUK LANDSKAP SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RLD 510 - ASAS-ASAS EKOLOGI SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RMK 252 - PENGANTAR PENGURUSAN PROJEK FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RMK 357 - PENTADBIRAN TANAH FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RMT 555 - PERSEKITARAN PERUNDANGAN FEB 03. (LEGAL ENVIRONMENT). [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RMT 556 - PENGURUSAN & ORGANISASI PROJEK FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RPG 131E - APPLIED QUANTITATIVE METHODS FEB 03. KAEDAH KUANTITATIF GUNAAN. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RPG 537 - PENGGUNAAN KOMPUTER UNTUK PERANCANGAN FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RPK 222E – CONSERVATION FEB 03. (PEMULIHARAAN). [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2003) RPK 233 - KAEDAH ANALISIS PERANCANGAN FEB 03. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2001) RPK 343 - ASPEK SOSIAL DALAM PERANCANGAN FEB 01. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RPK 531- TEORI DAN FALSAFAH PERANCANGAN SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (2002) RPK 533 - KAEDAH DAN TEKNIK PENYELIDIKAN SEP 02. [Teaching Resource]

PPPB, Pusat Pengajian Perumahan Dan Bangunan (1996) SBU 214 - TEORI PEMBANGUNAN ISLAM APRIL 1996. [Teaching Resource]

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (1995) JBB 121/3 - Bahan I - Mei - Jun 1995. [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JIB 317 - Fisiologi Tumbuhan (Februari/Mac 2004). [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2004) JIK 319- Spektroskopi Kimia Organik (Februari/Mac 2004). [Teaching Resource] (Submitted)

PPPJJ, Pusat Pengajian Pendidikan Jarak Jauh (2003) JTW 108 - Makroekonomi. [Teaching Resource] (Submitted)

PPTI, Pusat Pengajian Teknologi Industri (2005) IEK 209 - SISTEM PERUNDANGAN PERSEKITARAN KESIHATAN DAN KESELAMATAN MAC 05. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 311- MASYARAKAT DAN ALAM SEKITAR SEPT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IEK 314 - AUDIT PERSEKITARAN SEPT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (1996) IMG 416-3 - KAWALAN DAN PENILAIAN MUTU MAKANAN OKT-NOV 1996. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 205 - BAHAN PLASTIK APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 216 - TEKNOLOGI RESIN April 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IPK 216 - TEKNOLOGI RESIN APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2000) IPK 216 - TEKNOLOGI RESIN APRIL 2000. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IQK 210 - REKABENTUK UJIKAJI APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IUK 105 - APLIKASI KOMPUTER PERINDUSTRIAN SEPT-OKT 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 203/2 - REKABENTUK UJIKAJI FEB 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IUK 204/3 - PERKEMBANGAN PRODUK FEB 04. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2003) IWK 202 - TEKNOLOGI PANEL BERASASKAN KAYU APR 03. [Teaching Resource]

PPTI, Pusat Pengajian Teknologi Industri (2004) IWK 202E/4 - BIO-RESOURCES BASED PRODUCTS FEB 04. [IWK 202E/4 - PRODUK BERASASKAN BIO-SUMBER]. [Teaching Resource]