Items where Subject is "T Technology > TN Mining Engineering. Metallurgy"

Ahmad, Zainal Arifin and Ratnam, Mani Maran (2016) High wear Resistant Ceramic Cutting inserts With Enhanced Toughness For High-Speed Machining. Project Report. Universiti Sains Malaysia. (Submitted)

Ariffin, Azlan and Abdul Rashid, Azura and Saowaroj, Chuajuljit and Oshima, Masahiro (2013) Optimization and Characterization of Raw Waste Latex/Polystyrene Blends. Project Report. Universiti Sains Malaysia. (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 219/3 - Pengenalan Kepada Kejuruteraan Perlombongan [Introduction To Mining Engineering] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 242/3 — Petrography and Ore Microscopy [Petrografi dan Mikroskopi Bijihl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 329 — Engineering Geophysics [Kejuruteraan Geofizikl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 418/3 — Petroleum Engineering [Kejuruteraan Petroleum] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS308/3 — Materials Transport Engineering [Kejuruteraan Pengankutan Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Ismail, Hanafi (2013) Potential Of Oil Palm Ash As A New Filler in Natural Rubber Compounds. Project Report. Universiti Sains Malaysia. (Submitted)

Mohamad, Hasmaliza and Ahmad, Zainal Arifin and Ibrahim, Norfadhilah (2013) In-Situ Synthesis of A-Cordierite using Talc, Kaolin and Dolomite Through Glass Route by. Project Report. Universiti Sains Malaysia. (Submitted)

Wye Kheong, Patrick Lim (2012) Characterization Of Halogen-Free Core Material With Various Flame Retardants. Masters thesis, Universiti Sains Malaysia.

A

Ab Han, Norfateha (2018) Weathering Classes In Relation To Physical And Mechanical Properties Of Decomposed Granite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Halim, Mohd Fahmi Hafiz (2018) Effect Of Spot Welding Processing Parameters On Ferrous And Non Ferrous Metal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Jabar, Muhamad Hafizuddin (2022) Processing Of Red Gypsum Using Hyddrocyclone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Karim, Amirul Aiman (2018) Grindability Of Fine Particle Gold Ore Using Vertical Stirred Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Rahim, Muhammad Anwar (2022) Characteristic And Potential Of Perlis Carbonate Rock In The Downstream Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Aziz, Khairunnisa (2018) Epoxy-Polyamide-Methyl Ethyl Ketone Laminate Systems Simulation On The Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Halim, Mohammad Aminuddin (2022) Simulation Study Of Clinker/Grinding Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Halim, Muhammad Helmi (2018) Assessment Of Quarry Environmental Modeling Software Version 2.0 (QEMS V2.0) For Estimation Of Noise At Crusher Boundary. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Jalil, Nurhanisah (2022) Comparison Analysis Of Rock Fragmentation After Blasting Between Imagej Analizer And Wipfrag Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Kudus, Muhammad Helmi (2018) Preparation, Characterization And Properties Of Graphene Filled Epoxy Nanocomposites Produced Using Colloidal Polymerization Method. PhD thesis, Universiti Sains Malaysia.

Abdul Nashir, Mohd Khairul Nidzam (2018) Mineralogy And Geochemical Study Of Air Piau, Kelantan Gold Prospect (Drill Core). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahim, Ainul Afeeqah Athirah (2018) Manganese Removal In Groundwater Treatment Using High Grade Limestone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahman, Hazrina (2004) Pengelasan Mineralogi Dan Kimia Bagi Lempung Dari Sarawak Barat, Malaysia Untuk Kegunaan Dalam Industri Jubin Di Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahman, Najihatul Nabihah (2018) Analysis Of Rock Fragmentation Using Wipfrag At Lafargeholcim Rawang Quarry, Selangor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Razak, Muhamad Syahizat (2018) Groundwater Exploration By Using Electrical Resistivity Survey. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Wahab, Haziq Mudzakir (2018) Effect Of High Temperature On Oxidation Behavior Of Superheater Materials Formation Of Protective Oxide Scale. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdullah, Noor Salihah (2018) Evaluation Of Hydroxyapatite From Fish Bone As Potential Protein Adsorber And Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abu Bakar, Nur Adriana Nazifa (2019) Effect Of Grain Refinement Process Using Equal Channel Angular Pressing On The Properties And Corrosion Behaviour Of Sn-3.0ag-0.5Cu Solder. Masters thesis, Universiti Sains Malaysia.

Adzaman, Amir Faisal (2022) Study On The Rock Quality Designation (RQD) And Groundwater Cavity Of The Kuala Lumpur Limestone Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Muhammad Hamizan (2022) Lead Removal Through The Adsorptions Of Reactivated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Ahmad, Nur Husna (2018) Study On The Relationship Between Tensile And Hardness Properties On Several Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad @ Sofa, Hazwani Syaza (2018) Characterization And Properties Of Natural Rubber/Recycled Acrylonitrile-Butadiene Rubber Blends. PhD thesis, Universiti Sains Malaysia.

Ahmad Romil, Rozaida (2018) A Study On The Relationship Of Rock Strenght And Grindability Of Limestone, Granite And Metallic Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmadipour, Mohsen (2018) Fabrication, Characterization And Humidity Sensing Properties Of Radio Frequency Magnetron Sputtered Calcium Copper Titanate (CCTO) Thin Film. PhD thesis, Universiti Sains Malaysia.

Alaudin, Nur Asleena (2018) Self Assembly Gold Nanoparticles Modified Electrode For The Electrochemical Detection Of Mercury And Lead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alias, Nur Syahida (2018) Multicomponent Gas-Solid Reactions Kinetic Modelling Of NiOFe2O3 Reduction In Natural GAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alias, Nurhaswani (2015) Synthesis And Electrochemical Behavior Of Lifepo4/C With Air-Electrode For Aqueous Lithium Ion Battery. Masters thesis, Universiti Sains Malaysia.

Amanda Kwok, Si En (2022) Electrochemical Characterization Of Tin Electrode In Synthetic Seawater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ameer, Nur Dinie (2018) Evaluation Of Tin In Amang From Rahman Hydraulic Tin Sdn. Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amir, Amalina (2005) Kesan Penambahan SnO2 Terhadap Bahan Ferroelektrik Baru BaTi2O5 Melalui Kaedah Tindak Balas Pepejal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amiruddin, Atikah Zulaikha (2018) Soldering Characteristics And Corrosion Behaviour Of Indium Added To SAC305 Solder Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ang, Chai Pin (2022) Effect Of Multi-Wall Carbon Nanotubes On The Performance Of Self-Healing Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Anor, Nur Ilmadiena (2022) Experimental Study Of The Effect Of Granite Cutting Waste As Partial Replacement Of Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ariff, Ummi Fatisya Ain (2022) Characterization Of β-TCP Coated On Stainless Steel 316. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Asri, Muhammad Anas (2018) Blasted ORE Fragmentation And Its Influence On Excavators Productivity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Atan, Mohd Nidzam Adha (2022) Structure-Properties Relationship Of Open Cell Ethylene Vinyl Acetate Foam For Sound Insulation Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Au Yong, Huey Leen (2022) Investigation Of Silver Oxide Nanoparticles In Polymannose Thin Film On Resistive Switching Characteristics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Awang Kechik, Nur Aliah Hazirah (2018) Effect Of Blast Designs On Rock Fragmentation At Lafarge Kanthan Quarry, Chemor, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azami, Khairunnisa Azalin (2018) Effect Of Electron Beam Irradiation Of High Density Polyethylenewaste Tire Powder (Hdpewtp) Blends On Processability, Tensile Properties And Morphological Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azizan, Muhammad Ikhram Hakim (2022) Characteristic Of Silica Sand From Kuantan, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azlan Shah, Siti Nuraqilah (2022) Aluminium Pollution In Sediment Of Perai River, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Afif Hafizhan (2022) Study On Reclycing Of Industrial Steel Waste In The Production Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Nur Iylia Ayuni (2022) The Effect Of Surface Property Towards Bacterial Biofilm Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Azman, Syamil Akhyar (2022) Fabrication Of 3D Biodegradable PBAT/PLA Blends Electrospun Nanofiber For Cardiac Patch Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azmi, Latifah Suha (2018) Physical And Chemical Characterization Of Iron Ore From East Coast Of Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azmi, Nurul Atiqah (2022) Corrosion Of Nanocomposite Sn/Ag Coating On Copper Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

B

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 332/3 — Whitewares and Glasses [Tembikar Putih dan Kaca] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 236/3 — Materials Thermodynamic [Termodinamik Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (In Press)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 333/3 — Transport Processes [Proses-Proses Pengangkutan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 344/3 — Mechanical Metallurgy [Metalurgi Mekanikal] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 428/3 — Occupational Safety And Health [Keselamatan Dan Kesihatan Pekerjaan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 441/3 — Applied Metallurgy [Metalurgi Gunaan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 201/3 — Mendapan Mineral [ Mineral Deposits] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 315/3 - Hydrometallurgy [Hidrometalurgi] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 32213 — Mineral Physical Processing [Pemprosesan Fizikal Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 425/3 - industrial Minerals [Mineral Perindustrian] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 215/3 — Comminution and Sizing [Kominusi dan Pensaizanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 419/2 - Blasting Technology [Teknologi Peletupanl Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 432/3 — Environmental Chemistry for Engineering Practice [Kimia Alam Sekitar Untuk Amalan Kejuruteraanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS308/3 — Materials Transport Engineering [Kejuruteraan Pengankutan Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 323/3 — Pyrometallurgy [Pirometallurgil Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 339/3 — Mineral Economics [Ekonomi Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS328/3 - Geokimia Carigali [Geochemical Exploration] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS328/3 — Geokimia Carigali [Geochemical Exploration] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahaudin, Aishah Shamimi (2022) Investigation Of Boron Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Balakrishnan, Prakash Babu (2005) Kesan Peningkatan Suhu Terhadap Pembentukan Titanium Silisida. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Boey, Zhan Hei (2018) From Natural Bio-Resource Waste To Akermanite Bioceramics For Synthetic Bone Substitution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Bun , Kim Ngun (2012) Characterization Of Cambodian Clays And Their Suitability For Ceramic Tiles Applications. PhD thesis, Universiti Sains Malaysia.

Bunyam, Timothy Lambat (2018) Attempt To Reducing The Ground Vibration Level Due To Blasting Activity Based On The Evaluation Of Blasting Geometry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

C

Chai, Pei Ying (2022) The Effect Of 3D Printing Parameters On The Properties Of Thermoplastic Polyurethane Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chai, Shir Ying (2018) Effect Of Different Type Of Isocyanates On The Properties Of Shape Memory Polyurethane Elastomer Based On Palm Kernel Oil Polyol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chamnek, Arvitcha (2018) Effect Of pH And Contact Time On The Adsorption Of Heavy Metals In Acid Mine Drainage Using Hydrated Lime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chang, Wan Ling (2018) Synthesis Of Zinc Selenide Quantum Dots By Successive Ionic Layer Adsorption And Reaction (SILAR) Method For Quantum Dot Sensitized Solar Cells (QDSSC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Che Halin, Dewi Suriyani (2004) Pencirian Kesesuaian Kaolin Dari Gua Musang, Kelantan Untuk Kegunaan Industri Kertas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheang, Mun Kit (2022) Mechanical Properties And Biodegradability Of Carboxylated Nitrile Butadiene Rubber Reinforced With Cellulose Nanocrystals. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chen, Chee Siung (2004) Kegunaan Karbon Teraktif Dan Resin Dalam Merawat Air Sisa Menggunakan Kaedah Kolum. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chen, Tze Xiang (2022) Development Of Polymer Nanocomposite-Based Coating For Corrosion Protection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheng, Shu Yen (2019) Development Of Poly(Lactic Acid) Microspheres/Gelatin Coated Beta-Tricalcium Phosphate Scaffold For Bone Tissue Engineering Application. Masters thesis, Universiti Sains Malaysia.

Cheng, Wen Cai (2022) Effects Of Hybridization Of Graphene Oxide And Halloysite Nanoclay On The Oil Absorption Of Polyurethane Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheong, Yi Huan (2022) Effect Of Fullerene (C60) Concentration In Pectin Polysaccharide Thin Film For Resistive Switching Characterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chim, Jia Wen (2018) Quality Assessment Of 3d-Printed Plastic Parts Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chin, Chee Lung (2018) Optimization Of Physical Characterization Of Malaysian Clay For Ceramic Tile Production. PhD thesis, Universiti Sains Malaysia.

Choo, Hong Han (2018) Reactivation, Oxidation And Surface Functionalization Of Spent Activated Carbon For Glycerin Decolourization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chow, Li Chin (2018) Fabrication And Characterization Of Polylactic Acid (PLA) Blend Biomaterial Using 3D Printing For Potential Application In Tissue Engineering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Christina Chin, Kai Qi (2022) Investigation Of Encapsulant Discoloration Mechanism In UV/Blue Light-Emitting Diode With Copper Hybrid Particles Filler Using Taguchi Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chu, Chia Shin (2018) Fabrication Of Ti-40Nb-10HA Composite And Ti-40Nb Alloy With Surface Nanotubes For Implant Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chua, Jing Ting (2018) Effect Of Fused Deposition Modelling Fabrication Parameters On The Tensile Properties Of Acrylonitrile Butadiene Styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

D

Darryl Wong, Jun Chen (2018) The Impact Of Different Lateral Size Of Graphene Oxide On The Performance Of The Emulsified Acrylate-Based Pour Point Depressant And Its Application In Crude Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Derrick Chew, Hsien Nam (2022) Synthesis Of MnO2 For Surface Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Din, Muhamad Nur Iman Syafaat (2022) Bio-Based Oil As A New Rubber Processing Oil In Development Of Green & Sustainable Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Dinno, Nur Dianna (2022) Nutrient Removal Efficiencies In A Bioretention Cell Using Pre-Treated Coconut By-Product As Carbon Source. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

E

Ezekiel, Iliya (2018) Synthesis And Characterization Of Multi-Doped (Mg2+, Si4+ , Cu2+, Fe3+) Carbonated Hydroxyapatite Via Nanoemulsion Method. Masters thesis, Universiti Sains Malaysia.

F

Fadzil Akmar, Nur Humairah (2022) Impact Of Different Ultrasonic Frequencies On Precipitation Process Of Dicalcium Phosphate Dihydrate Coated Hydroxyapatite Granular Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Faizul Hilma, Muhamad Nabil (2018) Preparation And Characterization Of Cnt/Epoxy Nanocomposites Using Colloidal Polymerization Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Fishal, Nur Fitrah (2022) Numerical Investigation On The Polymer Flow In A Restriction Flow Path. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

G

Gan, Soon Xin (2022) Preliminary Study Of Dicalcium Phosphate Dihydrate Coated 45S5 Bioglass Granule. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ghazali, Muhammad Faris Afdhal (2018) Adhesion Performance Of Solvent-Based Adhesive In Medical Tube. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Guan, Min Li (2022) Post Annealing Treatment Of TiO2 Nanotubes For Defective Black Oxide Formation And Application In Heavy Metal Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

H

Hamdan, Nur Zafirah (2018) Curing Characteristics, Tensile And Morphological Properties Of Tea Waste Filled Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hamizai @ Hamizzi, Mohamad Faiz (2018) Physical And Chemical Characterization Of Complex Gold Ore From Peranggih Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Haris, Nuradrina (2022) Sequential Leaching Of Malaysian’s Ion Adsorption Clay Rare Earth Element. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hasan, Norwanis (2018) Properties Of Cement Syntactic Foam Composite For Sound Insulation Application. PhD thesis, Universiti Sains Malaysia.

Hasbullah, Nurul Anis (2022) Surface Interactions Of Polymer Nanoparticles In Waxy Crude Oil Model System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hiew, Wai Kien (2022) Development Of Diffusion Barrier-Forming Coating For High-Temperature Application: Effect Of Coating Duration And Bath Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ho, Yue Cheng (2022) Development And Characterization Of Chitosan-Cellulose Nanofiber Hydrogel Scaffold For Tissue Engineering Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hor, Bing Yao (2022) Effect Of Agitation To Electroless Nickel Plating Of NiP/Ag Nanocomposite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Huan, Jia Yee (2022) Effect Of Fused Deposition Modeling (FDM) Parameters On The Warpage And Different Composition Polylactic Acid/Ethylene-Vinyl Acetate Blend. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hussain, Zuhaiiawati and Palaniandy , Samayamutthirian (2012) Carbothermal Reduction of Mechanical Activated Hematite and Anatese Mixture for Synthesis of Iron Based Composite. Project Report. Universiti Sains Malaysia. (Submitted)

I

Ibrahim, Nur Fatin Nabila (2018) The Effect Of Various Compatibilizers On Properties Of Mengkuang Leaf Fibre Filled Poly (Lactic Acid) Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Idris, Muhammad Yusran Azim (2022) Tensile Properties And Water Absorption Of Mineral Fillers Filled Polylactic Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Idrus, Nurul Athira (2022) Evaluation Of Mechanical And Interfacial Properties Of Kenaf Filler/Poly (Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Imbau, Arnold (2022) Preliminary Study Of Self-Setting 45S5 Bioglass Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ishak, Atiikah (2018) Assessing Optical And Photocatalytic Properties Of Metal Coupled Ti02 Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ismail, Iman Firdaus (2022) Development Of Soft And Flexible Filament For 3D Printing Of Anatomical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ivon, Tiew (2018) Fish Bone Waste As Potential Source Of Apatite For Bone Replacement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

J

Johar, Muhammad Faris Zamir (2022) A Study On The Potential Of Tin Recovery From Iron Ore Tailing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Johari, Nurrahman (2018) The Analysis Of Particle Size Distribution (PSD) After Blasting Using Aerial Photography At Fys Marketing Sdn. Bhd., Bukit Mertajam, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Joshua Gan, Oon Joo (2018) Improvement Of Led Light Extraction Efficiency By Silica Micro Repeating Structure Growth. Masters thesis, Universiti Sains Malaysia.

Juhari, Aisyah Shahirah (2018) Rock Slope Stability Analysis Using Photogrammetric Method At Hume Cement Quarry, Gopeng, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

K

Kalai Selvam, Devah (2022) Hot Dip Galvanizing Of Zn-Al-WO3 Coating On Mild Steel: Effect Of Surface Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamaruddin, Nur Izaani Akma (2018) The Effect Of Milling Time, Stirring Speed And Ball Mill To Powder Ratio Of Malaysian Tin Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamarujaman, Nur Maisara (2022) Surface Modification Of 45S5 Bioactive Glass Microspheres For Drug Delivery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamso, Nurul Syazni (2022) Physical And Chemical Characterization Of Granitic Rock For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Karim, Mohamad Afiffudin (2018) Formation And Durability Investigation On Graphene-Based Superhydrophobic Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Keokangdong, Sengphet (2014) Development Of Porous Ceramic Clay Bodies Using Four Different Types Of Bioresource Wastes. PhD thesis, Universiti Sains Malaysia.

Khairulnizan, Hazman Arif (2022) Mineral Characterization Of Cassiterite Ore From Selected Area In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khazali, Mohamad Razif (2018) Geophysical Subsurface Gravity Survey Modeling Of Segamat- Kuantan Using Matlab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khong, Ling Han (2018) Characteristics Of Kaolin From Eastern Kinta Valley And Its Potential For Industrial Uses. Masters thesis, Universiti Sains Malaysia.

Khong, Ling Xin (2018) Treatment Of Iron In Groundwater Using Pebble Size And Sand Size Marble Column Filter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kiong, Yuen Yee (2022) Hydrothermal Synthesized Zinc Oxide Nanoparticles With Manganese Doping For Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Koay, Tze Yen (2018) Effect Of Cryogenic Treatment Prior To Equal Channel Angular Press (ECAP) Of Sac Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kok, Kai Lin (2022) Synthesis And Characterization Of Magnesium Oxide Nanomaterials Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kong, Chee Xian (2018) Superior Hardness Of Zirconia Toughened Aluminaceramics Through Co-Addition Ofmagnesium Oxide Andlanthanum Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

L

Lai, Kher Wei (2022) Reactivation Of Ion Exchange Resins For Water Treatment Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lai, Ngoc Thien (2019) Fabrication And Characterisation Of Magnetorheological Elastomers Based On Natural Rubber, Carbonyl Iron And Waste Natural Rubber Glove Powder. Masters thesis, Universiti Sains Malaysia.

Lai Tee, Tan (2005) Kesan Gegaran Bumi Dan Ledakan Udara Terhadap Alam Sekitar Akibat Daripada Aktiviti Peletupan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Le, Anh Thi (2018) Reusability Of Zinc Oxide Nanorod For Photocatalytic Decomposition Of Rhodamine B Dye After Copper Metal Deposition. Masters thesis, Universiti Sains Malaysia.

Lease, Jacqueline (2018) Electrochemical Characterization Of Lithium Vanadium Oxide Anode With Agar Binder In Aqueous Rechargeable Lithium Ion Batteries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, Eyann (2022) Numerical Study On The Effectiveness Of Homogeneous Multiphase Volume Of Fluid (VOF) Model In Rubber Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, See Kay (2022) Recycle And Synthesis Green Reduce Graphene Oxide From Spent Battery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liew, Xian Yun (2018) Development Of Bismuth Particles Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lim, Shu Lee (2010) Formation Of Ceria Buffer Layer For Yba2cu3o7-X Superconductors. Masters thesis, Universiti Sains Malaysia.

Lim, Chow Peei (2022) Utilization Of Plasticizers And Lubricants Derived From Palm Oil On Rheological And Mechanical Properties Of Styrene Butadiene Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liong, Kai Min (2022) Synthesis And Characterization Of Aluminium Based Nanomaterials Using Direct Heating Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Loo, Ji Yu (2022) Tin Nanoparticles Modified Electrode For Simultaneous Detection Of Cadmium (Cd) And Lead (Pb) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Low, Lay Foon (2012) Preparation And Characterization Of Epoxy Particlefilled Thermosetting Composites. Masters thesis, Universiti Sains Malaysia.

M

Mad Naser, Mohamad Azwan (2019) Development Of An Affordable Curemeter To Monitor Cure Characteristics Of Unsaturated Polyester Resin. Masters thesis, Universiti Sains Malaysia.

Mahadi, Nurul Amirah (2022) Bioactivity Improvement Of 45S5 Bioglass Through Calcium Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mahyudin, Muhammad Luqman Hakim (2022) Development Of Smart Polybutylene Adipate Terephthalate (PBAT) Blending For Plant Pot Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Maijin, Richell (2022) Mineral Characterization Study of Gold Deposit in Tawau, Sabah Focusing on Mineralogy and Geochemistry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mamat @ Mohamad Nor, Normahira (2019) Gentamicin-Loaded Poly (Lactic Acid) Microsphere Corporated Chitosan-Coated Carbonate Apatite Scaffold. PhD thesis, Universiti Sains Malaysia.

Marobi, Mohammad Ajwad (2018) Surface Oxidation Of Copper For CuO Nanowires Formation And Their Catalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Masraff, Mimi Syahira (2018) Aligning Of Carbon Nanotubes With An External Electric Field To Improve Thermal Conductivity Of Polydimethylsiloxane Nanocomposites Interface Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mat Radzi, Muhammad Adib Nuqman (2022) Effect Of Different Calcium Salt Coating On Mechanical And Bioactivity Properties Of Cordierite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mat Saad, Nurihal Hanim (2012) Effect Of Resistance Spot Welding Parameters On Copper And Brass. Masters thesis, Universiti Sains Malaysia.

Mazlee, Muhammad Ihsan Firdaus (2018) Effect Of Various Grinding Mechanisms During Particle Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Md Rasib, Siti Zalifah (2019) Synthesis, Characterization And Properties Of Chitosan-Poly (Methacrylic Acid-Co-N-Isopropylacrylamide) Hydrogel For Drug Delivery. PhD thesis, Universiti Sains Malaysia.

Md Zan, Siti Rohaidah (2022) A Comparative Study On The Effect Of Chemical Additives On Clinker Grinding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Meor Akil Julnasir, Nurwahidah (2018) Full Simulation Of Cycle Time Using Talpac Software At Lafarge Kanthan Quarry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Merdan, Fathin Atiqa (2022) Ammoniacal Cyanide Leaching Of Complex Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Milus, Mohd. Nur Fahmie Ikhwan (2018) Numerical Investigation Of Non- Newtonian Fluid During Mold Filling Process With Phase Change Consideration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad, Ahmad Azmin and Hassan, Oskar Hasdinor and Teridi, Mohd Asri and Ahmad, Zainal Arifin and Harun , Kausar (2015) First Principles Density Functional Theory Calculations On Zinc Oxide Growth Mechanism. Project Report. Universiti Sains Malaysia. (Submitted)

Mohamad, Ikmal Nor Haikal (2022) Assesstment Of Water Quality Around Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad, Julie Juliewatty and Hutagalung, Sabar Derita and Ahmad, Zainal Arifin (2013) Production of CaCu3Ti40i2 (CCTO) Electroniceramics via Plasma Spray Method. Project Report. Universiti Sains Malaysia. (Submitted)

Mohamad Jafri, Nurul Husna (2022) Effect Of Skim Latex On Mechanical Properties Of Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Muzaffar, Hud (2018) Physical And Chemical Characterization Of Malaysian Sulphide Gold Ore From East Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Rashid, Nor Shafikah (2022) A Novel Waterborne Coating Based On Styrene-Acrylic Copolymers For Construction Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Yusoff, Nurulaini (2022) Transforming Dental Mould Waste (DMW) Into High Purity Calcium Source By Chromium Removal Through Alkaline Caustic Leaching (ACL) Using Ultrasonic Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Zaidi, Mohamad Za'im (2018) Hypochlorite Leaching Of Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamed Jawhar, Mohammad Taufiq (2022) Hot Corrosion Behaviour Of Slurry Aluminide Coating In Molten Alkali Salts. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mohamed Khalib, Rosfariza (2004) Kajian Kesan Saiz Partikel Alumina Dan Tempoh Pengadukan Ke Atas Sifat-Sifat Fizikal Krusibel Alumina Yang Dihasilkan Menggunakan Kaedah Tuangan Gel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammad, Anis Najihah (2022) The Effect Of Tannic Acid Crosslinker On The Properties Of Kenaf Fibre And Polyvinyl Alcohol Binder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammad Firdaus, Abu Hashim (2013) Modelling of thermal and charge/discharge cycle behaviors of nickel metal hydride (NI-MH) battery system. Masters thesis, Universiti Sains Malaysia.

Mohammed Kassim, Mohammed Zul Azeem (2018) The Effect Of Thickness Reduction On Microstructure And Mechanical Propertiesof Cold Rolled And Cryorolled Low Carbon Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Aaznan, Nur Aina Najeehah (2018) Removal Of Arsenic Using Synthetic Iron Oxyhydroxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Akhir, Mohamad Adli (2022) Physical And Chemical Characterization Of Clay Deposits For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Amir, Esmanizam Esmaly Eusainy (2018) Effects Of Hydrolysis Using Various Parameter For Recovery Of Reducing Sugar From Local Coconut Dregs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Anuar, Siti Nur Nabilah (2018) Fabrication And Characterization Of Bioactive Glassalginate Scaffolds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariff, Mohamad Fitri Azim (2022) Preliminary Study On Fabrication And Characterization Of Compatibility HA/TPU Composite Filament For Bone Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Mohamad Fadhlin (2018) Effect Of Acidic Calcium Phosphate Solution Concentration On The Setting Properties Of Porous Β-Tricalcium Phosphate Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Muhammad Afiq Ariff (2022) Effects Of Geological Properties Of Limestone Formation In Blasting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Azman, ‘Aisyah Mardhiah (2022) Alkaline Treatment Of 3D Printed TI-AL-V Alloy For Bioactivity Surface Modification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Bukhori, Muhammad Aiman (2022) Physicochemical Characterization And Diagnostic Leaching Of Complex Copper-Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Din, Shamin Aida (2022) Application Of Feldspar Filler On Curing Characteristics And Physical Properties Of Elastomeric Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Hilmi, Mohamad Suffian (2018) Processing Of Coarse Sand From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Jaffri, Ju Liyana (2022) Effect Of Water Absorption Towards Mechanical And Physical Properties Of Hybrid Flax/Glass Fiber Laminated Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Johary, Muhammad Danial (2018) Impact Of Pour Point Depressant Enhanced With Graphene Oxide On Thermal And Microstructure Properties Of Simulated Crude Oil Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Khairol Anuar, Nur Afifah Hayani (2022) Effect Different Ratio Of Soda Feldspar And Potash Feldspar On The Properties Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mohd Razali, Aisyah Awanis (2022) Hybrid Effect And Stacking Sequence On Mechanical And Morphological Properties Of Flax/Glass Fiber Reinforced Epoxy Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Sabri, Nur Shauqina (2022) Properties And Performance Of Natural Rubber Latex (NRL) Band: A Scavenging Medium To Capture Microplastic Waste In Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Safuan, Nurfarah Rasyidah (2018) Development Of Superhydrophobic And Self-Cleaning Surfaces Using Silane-Based Material And Cu-Doped TiO2 Nanoparticles For Ceramic Wall Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Saidina, Dandan Satia (2015) Preparation and characterization of calcium copper titanate filled epoxy composites for embedded capacitor applications. Masters thesis, Universiti Sains Malaysia.

Mohd Shah, Mohd Faizatul Shahrizal (2018) Investigation On Processing Parameter Of Single Screw Extrusion Using Experimental And Numerical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Shukri, Nurulizzati (2012) Mechanical And Thermal Properties Of Thermally Conductive Fillers Filled Polypropylene Composites. Masters thesis, Universiti Sains Malaysia.

Mohd Zain, Mohd Norhanizan (2005) Pengaruh Bahan Tambah Metakaolin Sebagai Bahan Pengganti Dalam Peresapan Ion Klorida Dalam Mortar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Za’i, Mohamad Zulhakimi Haiqal (2022) Fine Grinding Of Silica Via Stirred Milling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd. Moslim, Nur Atiqqah (2019) Synthesis And Characterization Of Mg-Substituted Biphasic Calcium Phosphate. Masters thesis, Universiti Sains Malaysia.

Mohd. Saad, Nuraizul Azren (2022) Correlation Of Blast Design And Ground Vibration During Blasting At Imerys (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohmad Saridi, Mohamad Husaini (2018) Synthesis And Characterization Of Different Polyol Soft Segments In The Preparation Of Palm Kernel Oil Polyol Based Shape Memory Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Motham, Kanchana (2018) Microstructure, Mechanical Properties, And Corrosion Behavior Of Cryorolled Low Carbon Steel Subjected To Heat Treatment. Masters thesis, Universiti Sains Malaysia.

Muhamad, Nor Syafiqah (2018) Corrosion Behavior Of Quenched SAC305 Solders. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Azman, Nadiah Adlin (2022) A Comparative Study Of Different Collectors In The Flotation Of Rare Earth Mineral. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Noor, Mohamad Ikhwan (2018) Effect Of Different Types Of Banana Plants Fibres On The Physical, Mechanical And Thermal Properties Of Agar Based Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Zaki, Nur Amierah An-Nissa' (2018) Processing Of Heavy Minerals From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad, Amirul Asraf (2018) Mineral Liberation Studies Of Complex Gold Ore From Peranggih Prospect, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad Sabri, Muhammad Iman Rif’at (2022) The Effect Of Marine Fouling And Seawater Corrosion On Doped Titanium Nitride Electrode. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

N

NA, Subagja (2019) Synthesis Of rGO/TiO2 Nanowires Derived By Thermal Oxidation Of Titanium As A Photocatalyst For Cr(VI) Reduction. Masters thesis, Universiti Sains Malaysia.

Nazatul Dzahir, Nurul Fatin Nazira (2022) Study Of Malaysian Rare Earth Elements: Mineral Characterization Of Monazite And Xenotime Concentrate From Amang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Chi Loon (2018) Effects Of Halloysite Nanotube On The Mechanical, Thermal And Morphological Properties Of Polypropylenepolyamide Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Guan Sheng (2022) Synthesis And Characterization Of Titanium Dioxide Particles By Direct Heating Technique For Photodegradation Of Methylene Blue Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Nguyen, Van Thuong (2014) Characterization And Flammability Of Ethylene Vinyl Acetate (Eva)/Zeolite Composites. Masters thesis, Universiti Sains Malaysia.

Nik Jusoh, Nik Anis Hafiza (2018) Effect Of ZnO Seed Layer On The Growth Of ZnO Nanorods Via Solution Precipitation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Afiqah Adriana, Roslan (2022) Application Of Unmanned Aerial Vehicle (UAV) Photogrammetry Method For Rock Mass Rating Analysis Of A Rock Slope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Ashikin, Nor Fazreeniza (2018) Thermal And Rheological Properties Of 3D Printed Polylactic Acid Plasticized With Polyethylene Glycol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Asim, Muhammad Danial Haziq (2022) Characterization & Separation Of Tungsten In Cassiterite (Tin Middling) From Bukit Kachi Mine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Norfaizal, Nurhafiz Syaza (2018) Comparison Of Different Types Of Sago Starch Dispersion And On Mechanical Properties Of Biodegradable NR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Norridzwan, Ahmad Syamil (2022) Fabrication Of Porous Calcium Sulphate By Using Yeast As Pore Foamer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nurul Izzah, Abd Bashid (2022) Characterization Study Of Malaysian ION-Adsorption Clay NR-REE (Non-Radioactive Rare Earth Element). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

O

Ong, Mun Yee (2018) Kinetics Of Crystallization For Polypropylene/Polyethylene/Halloysite Nanotube Nanocomposites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ooi, Lhaang Chee (2018) Effect Of Compaction Pressure And Addition Of Silicon On Microstructure And Compressive Properties Of Porous Magnesium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ooi , Chee Heong (2014) Urea Adsorption By Activated Carbon Derived From Oil Palm Kernel Shell And Empty Fruit Bunch Fiber. Masters thesis, Universiti Sains Malaysia.

Osman, Norainin Sofea (2018) Optimisation Of Apatite Bioceramic Formation From Waste Dental Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Othman, Ainnur Hanim (2018) Hygrothermal And Wear Behaviour Of Short Carbon Fiber Reinforced Polycarbonate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Oung, Hor Yen (2022) Study On Water-Soluble Polymers For Biomedical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

P

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 311E-3 MINING METHODS AND LAWS OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 315 HYDROMETALLURGY OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 315-3 HIDROMETALURGI OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 315-3 HIDROMETALURGI OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 328-3 GEOKIMIA CARIGALI APRIL-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBS 328-3 GEOKIMIA CARIGALI FEB-MAC 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2003) EBS 329-3 GEOFIZIK CARIGALI FEB 03. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 329-3 GEOFIZIK KEJURUTERAAN APRIL-MEI 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 329E-3 ENGINEERING GEOPHYSICS APRIL 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 425-3 MINERAL PERINDUSTRIAN OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 425-3 MINERAL PERINDUSTRIAN OCT-NOV 07. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1995) EBS407-3 - KEJURUTERAAN PERLOMBONGAN III APRIL 1995. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2007) EBS 328-3 GEOKIMIA CARIGALI APRIL 07. [Teaching Resource]

Parameswaran, Vengadesh (2018) Processing Of Tin From Pegmatite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Pelawang, Khairul Shazwan (2018) Prediction Of Blast-Induced Ground Vibration During Blasting At Lafarge Quarry Kanthan, Ipoh, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Perumal, Suchitra (2018) Simultaneous Hydrolysis-Leaching Of Synthetic Manganese Ore Using Bamboo Saw Dust And Computational Analysis Using Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Poul Dawas, Emiellia (2022) The Effects Of Printing Parameters On The Tensile Properties Of 3D Printed Thermoplastic Polyurethane (TPU) Via Fused Deposition Modeling (FDM) Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Priscilla, Tong Shuen_ (2022) Synthesis And Characterization Of Rankinite From Rice Husk Ash And Eggshells. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Pusat Pengajian Kejuruteraan, Bahan & Sumber Mineral (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 113/3 — Engineering Materials [Bahan Kejuruteraanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

R

Rafie, Muhammad Akhmal Firdaus (2018) Modified Poly (Lactic Acid) (PLA) Filament For 3d Printing With Improved Thermal Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rafindi, Nurrafiq Arina (2022) Removal Of Cadmium And Chromium Using Titanium Dioxide Nanowires Under Ultraviolet Radiation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rahmat, Mohd Hafiz (2005) Kajian Penghasilan Teras Seramik Berliang Dan System Perekat Dalam Struktur Sandwic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rahmat, Nuruljannah (2022) Effect On Compatibility And Graphene On Shape Memory And Tensile Properties Of Polylactic Acid (PLA)/ Ethylene Vinyl Acetate (EVA) Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ramasamy, Shamala (2014) Effect Of Rice Husk Powder On Properties Of Natural Rubber Latex Foam. Masters thesis, Universiti Sains Malaysia.

Ramli, Norahasyima (2018) Crystallization Of Iron Oxide Nanotubes By Anodization And Their Relation To Photocatalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Abdul Fatah Zulkarnain (2018) Effect Of La2O3 Addition On The Hardness And Indentation Fracture Resistance Of Zta-Ceo2-La2o3 Ceramics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Mohamad Haikal (2018) Mineral Liberation Studies Of Complex Sulphide Gold Ore From Pahang, Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Nur Ain (2022) Recovery Of Copper From E-Waste Via Hydrometallurgy Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rozailan, Nai'mah (2018) Fabrication And Characterization Of Denture Adhesive Filled Starches Containing Antimicrobial Agents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rozana, Monna (2018) Development Of Zirconia Nanotubes And Iron Oxide Nanopores By Anodization Method For Photoactive Material. PhD thesis, Universiti Sains Malaysia.

Ruzlan, Muhammad Hakim (2018) Synthesis Of Polycrystalline Silicon Carbide Using Aluminum Carbide And Calcium Carbide With Silicon Tetrachloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

S

Saidin, Salina (2005) Penghasilan Kaca Dari Abu Kayu Mangga. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Salim, Siti Nur Hajar Abdul (2018) Zinc Oxide, Organoclay And Silica In Crosslinked Polyethylene Composite For Cable Insulation. Masters thesis, Universiti Sains Malaysia.

Salleh, Shaharatul A’ini (2022) Investigation Of Oxidation Process On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sallehuddin, Nurul Jannah (2018) Effects Of Annealing Treatment On Thermal And Mechanical Properties Of Poly (Lactic Acid). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Samsudin, Dalina (2018) Effectiveness Of Glut Palmitate Salt As Coupling Agent Compared To Polyethylene Grafted Maleic Anhydride And 3- Aminopropyltrimethoxy Silane In High Density Polyethylene And Natural Rubber Composite. PhD thesis, Universiti Sains Malaysia.

Samsul Baharin, Massara (2022) Properties & Characterisation Of The Halochromic CMC-PEG Hydrogel Film. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sardi, Nur Syamsinar (2018) Room Temperature Self-Healable Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Saril, Muhammad Amin (2022) Identification On Mineralogical And Mechanical Properties Of Rock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sarimon, Nurul Atikah (2018) Effect Of Silver On Sol-Gel Derived Bioglass System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Saudi, Nabilah (2022) Hydrophobic Polytetrafluoroethylene (PTFE) Coating On Endoscopic Lenses Via RF Magnetron Sputtering Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Seah, Ying Zhi (2022) Characterization Of Honey As Active Thin Film For Resistive Switching Memory Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Seow, Eng Heng (2004) Kajian Pengaruh Saiz Partikel Alumina Terhadap Sifat-Sifat Komposit Matriks Logam Aluminium Yang Diperkuatkan Dengan Partikel Alumina Dihasilkan Melalui Kaedah Metalurgi Serbuk. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Seow, Pek Ying (2018) Tensile Properties And Water Absorption Of Wood Sawdust Filled Polypropylene Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Shamsuddin, Hanis (2022) The Effect Of Voltage And Time On Oxide Nanotubes Of Titanium Alloy By Anodizing For Metal Implant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sharil Azuar, Wan Nur Syahidah (2022) The Study Of Cement Properties With Ceramic Waste Fillers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siew, Tuck Seong (2018) Fabrication Of Polysiloxane Based Stretchable Ink Filled With Silver Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sim, Yeap Feong (2022) Development Of Photo-Curable PMMA-Based Liquid Resin: Dispersibility Study Of Go And Ago In PMMA-Based Liquid Resin And Mechanical Analysis Of Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siti Aina Najian, Muhammad Zuber (2018) The Effects Of Different Plasticizers (Triacetin And Triethyl Citrate) On Polyvinyl Alcohol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Soon, Li Jie (2022) Preparation And Characterization Of Hydrophobic Polyurethane Coating For Steel Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sopheak, In (2019) Characterization And Process Recovery Of Refractory Gold Ores From Central Belt Malaysia. Masters thesis, Universiti Sains Malaysia.

So’od, Nurul Fazliniza (2018) Studies On The Effect Of Addition Modified Sago Starch On Mechanical Properties Of Natural Rubber And Synthetic Polyisoprene Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sreekantan, Srimala and Ahmad, Zainal Arifin and Mat, Ishak and Mokhtar, Norehan (2011) Formation of Nanotubular TiOa Bioactive Oxide Layer on Titanium and Cell Response Studies by. Project Report. Universiti Sains Malaysia. (Submitted)

Suhaimin, Intan Syazana (2019) Properties Of Bioactive Glass Reinforced Polyurethane Scaffold By Solvent Casting/Particulate Leaching Method. Masters thesis, Universiti Sains Malaysia.

Syed Anwar Idid, Syed Mohd Syafiq Idid (2018) The Extraction Of Tin And Copper From Roasted Copper Dross (RCD) And Copper Dross (CD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Syed Hussin, Azrina (2022) Study Of Clinker Grindability From YTL Cement, Kanthan, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

T

Tan, Boey Wei (2022) Study On Mechanical, Biodegradability And Compostability Of Agriculture Waste Loaded Biodegradable Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Gang Yang (2022) Removal Of Pollutants Using Nanostructured Tungsten Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Hong Liang (2022) Electrodeposition Of Copper On Stainless Steel For Solid Oxide Fuel Cell Interconnect Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Siew Min (2022) Microstructure And Kinetic Growth Of Aluminide Coating On 304 Stainless Steel By Slurry Aluminizing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Zhuang Min (2022) Synthesis Of Metal Oxide Coupled TiO2 Photocatalyst Particles For Enhanced Photodegradation Of Rhodamine B Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan , Seah Guan (2013) Preparation And Characterization Of Epoxidized Soybean Oil Based Thermoset, Blends And Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Tang, Yi Tian (2022) Investigation Of Phosphorus Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tang, Zi Jie (2022) Effect Of Halloysite Nanotubes On The Performance Of Self-Healing Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tengeo, Chee Ying (2022) Gold And Bismuth Nanoparticles Modified Electrodes For Simultaneous Detection Of Pb(II) Ions, Cd(II) Ions And Cu(II) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Teoh, Prakash (2004) Pengoptimuman Dan Keberkesanan Pengisaran Rutil Dengan Menggunakan Pengisar Jet. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Thajudin, Nuur Laila Najwa (2018) Comparison Of Mechanical, Physical And Thermaproperties Of Conventional Plastics Fabricated Using 3D Printing And Injection Moulding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Thian, Yoke Teng (2022) Water Absorption And Hygrothermal Aging Behavior Of Kenaf Fiber-Reinforced Poly(Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tneh, Kin Man (2022) The Effect Of Adding Silver Nanoparticles In Tin Surface Finish Electroplated With Ultrasonication On Wettability And Strength Of SAC305 Solder Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Toh, Jia Min (2022) Preparation And Characterization Of Self-Healing Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tran , Bao Trung (2013) Effect Of Graphite And Nbc On Mechanical Properties Of Aisi304 Binded Wc. PhD thesis, Universiti Sains Malaysia.

W

Wan Mohd Amin, Wan Abdur Rahman (2018) Evaluation Of Silicone Sealant Cure Characteristics Using A Fabricated Parallel Plate Rheometer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wan Saberi, Wan Ahmad Nazmi (2018) Hydrogeochemistry Characteristics Of Water And Stream Sediment Originated From Activities Surrounding Gunung Paku, Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wing Foong, Chin (2022) Effects Of Graphene Oxide Coating On The Properties Of Polyurethane/Nanofiller Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Chee Leong (2018) Synthesis And Characterization Of Manganese Dioxide Nanoparticles Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Jia Ying (2018) Effect Of Catalysts On The Formation Of Titanium Hydride Under Hydrogen Atmopshere. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Shi Chin (2018) Development Of Carbonated Hydroxyapatite (CHA) Porous Scaffolds For Bone Tissue Engineering Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Yoke Pei (2005) Penggunaan Konduktif Terma Poliuretana Sebagai Bahan Terma Antaramuka Yang Mungkin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Woo, Wei Jin (2018) Development Of Neem Modified ZnO Photocatalyst Incorporated LDPE For Antimicrobial Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wu, Chuen Li (2022) Acid Based Accounting (ABA) For Acid Mine Drainage Prediction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wye Kheong, Patrick Lim (2012) Characterization Of Halogen-Free Core Material With Various Flame Retardants. Masters thesis, Universiti Sains Malaysia.

Y

Yaacob, Solihin (2018) The Used Of UAV-Based Photogrammetry For Discontinuity Mapping At Hume Cement Quarry, Malim Nawar Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yahaya@Kamaluddin, Muhamad Zamri (2018) Synthesis Of TiO2 Nanoparticles And Characterization Of Sn-3.0Ag-0.5Cu/TiO2 Via Nanoindentation And Selective Electrochemical Etching. PhD thesis, Universiti Sains Malaysia.

Yap, Cia Ling (2018) Mechanical And Electrical Properties Of Short Carbon Fibre Reinforced Polycarbonate Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yap, Soon You (2018) Study The Synthesis Parameters And Effect Of Addition Of Acid Hydrolyzed Sago Starch On Mechanical Properties Of NR And XNBR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yeap, Kee Leong (2018) Aloe-Polysaccharides Thin Film As All-Natural And Flexible Resistive Random Access Memory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yew, Lih Wei (2018) Bioactive Glass Reinforced Polyurethane Scaffold Effect Of Hard Segment Content Of Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ying, Yuet Lee (2018) Synthesis Of ZnO Nanomaterials, WOx Nanoparticles And WOx/ZnO Nanocomposites For Inhibition Of Bacterial Growth And Organic Dyes Removal. Masters thesis, Universiti Sains Malaysia.

Yong, Hui Sin (2022) Surface Oxidation Of CU Extracted From Electronic Waste For CUO Nanowires Formation And Their Use To Reduce CR(VI). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yong, Rui Huang (2022) Multi-Stages Synthesis Of Calcium Hydroxide Particles From Malaysian Limestone By Sol-Gel Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yu, Kai Chun (2022) Tensile And Impact Properties Of Mineral Fillers Filled Poly(Lactide) Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Z

Zabidi, Muhammad Afiq (2018) Physical And Chemical Characterization Of Tin In Amang From West Coast Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahari, Mohamad Abdul Aziz (2018) Effect of Magnesium ION (Mg2+) Substitution and Calcination to the Properties of Biphasic Calcium Phosphate (BCP). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahisham, Zahira Sofiya (2022) Geochemistry And Petrography Characterization Of Ordovician Devonian Limestone Formation In Kinta District, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zaiful Bahari, Siti Khairina (2022) Study Of Water Quality In Sungai Kereh: Analysis On The Effluent Discharged From Kampung Selamat Based On The Requirement Standard. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zailan, Nur Nadhirah (2018) Characterization And Potential Industrial Appication Of Gypsum Rich Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zainon Najib, Nor Wahidatul Azura (2004) Kaitan Antara Perundangan Kuari Dengan Industri Pengkuarian. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zam Hariro, Aini Yusriena (2022) Effect Of Controllable Parameters On Rock Fragmentation At Imerys Mineral (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zamri, Nur Hazwani (2022) Application Of Hallimond Tube For The Flotability Study Of Pure Scheelite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zawawi, Nur’ain Syakirah (2022) Fabrication And Characterization Of Electrospinning Biodegradable Fabric Layer For Face Mask Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkarnain, ‘Aainaa Shahirah (2022) Application Of Hallimond Tube For Flotability Study Of Magnetite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Aiman (2018) Carbonisation Of Dead Leaves Biomass As Activated Carbon For Potential Application As Reinforcement Filler In Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Farzana (2022) Effect Of Ball Clay Addition In Slip Casting In Making Of Gloves Former. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zurainee, Nurul Izzaty (2022) Polyurethane Binder For Mxene Electrode Fabrication Of Hybrid Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)