Items where Subject is "T Technology > TN Mining Engineering. Metallurgy > TN263-271 Mineral deposits. Metallic ore deposits. Prospecting"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | F | G | H | I | K | L | M | O | P | R | S | T | Y | Z
Number of items at this level: 92.

Abdullah, Ahmad Makarimi (2012) Optimization Of Potassium Hydroxide (Koh) Etching On The Fabrication Of P-Type Silicon Nanowire Transistor Patterned By Atomic Force Microscopy Lithography. Masters thesis, Universiti Sains Malaysia.

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 219/3 - Pengenalan Kepada Kejuruteraan Perlombongan [Introduction To Mining Engineering] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 242/3 — Petrography and Ore Microscopy [Petrografi dan Mikroskopi Bijihl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 329 — Engineering Geophysics [Kejuruteraan Geofizikl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 418/3 — Petroleum Engineering [Kejuruteraan Petroleum] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS308/3 — Materials Transport Engineering [Kejuruteraan Pengankutan Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Rathnayake, W. G. Indrajith Udayakantha (2014) Synthesis And Characterization Of Silver Nanoparticles For Antimicrobial Application In Natural Rubber Latex Foam By. PhD thesis, Universiti Sains Malaysia.

A

Ahmadi, Eltefat (2018) Synthesis Of Titanium Tetrachloride Through Arbothermal Reduction And Chlorination Of Ilmenite Oncentrate. PhD thesis, Universiti Sains Malaysia.

Ali, Wan Fahmin Faiz Wan (2014) Response Surface Method Optimizing The Formation Of Yttrium Iron Garnet (YIG) Via Response Surface Method (Rsm) For Dielectric Resonator Antenna (DRA) Application. PhD thesis, Universiti Sains Malaysia.

B

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2015) UNIVERSITI SAINS MALAYSIA First Semester Examination 2014/201 5 Academic Session December 2014 / January 2015 EBS 201/3 - Mineral Deposits [Mendapan Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2015) UNIVERSITI SAINS MALAYSIA First Semester Examination 2014/2015 Academic Session December 2014 / January 2015 EBS 322/3 — Physical Mineral Processing [Pemprosesan Fizikal Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2015) UNIVERSITI SAINS MALAYSIA First Semester Examination 2014/2015 Academic Session December 2014 / January 2015 EBS 425/3 — Industrial Minerals [Mineral Perindustrian] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 332/3 — Whitewares and Glasses [Tembikar Putih dan Kaca] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 202/3 — Crystallography and Bonding in Solids [Kristalografi dan Ikatan Dalam Pepejall Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 236/3 — Materials Thermodynamic [Termodinamik Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (In Press)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 30012 — Engineering Statistics [Statistik juruteraanl Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 323/3 — Semiconductor Fabrication Technology [Teknologi Fabrikasi Semikonduktor] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 333/3 — Transport Processes [Proses-Proses Pengangkutan] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 201/3 — Mendapan Mineral [ Mineral Deposits] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 32213 — Mineral Physical Processing [Pemprosesan Fizikal Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBS 425/3 - industrial Minerals [Mineral Perindustrian] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA First Semester Examination Academic Session 2012/2013 January 2013 EBS 201/3 – Mineral Deposits [Mendapan Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA First Semester Examination Academic Session 2012/2013 January 2013 EBS 322/3 – Physical Mineral Processing [Pemprosesan Fizikal Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA First Semester Examination Academic Session 2012/2013 January 2013 EBS 425/3 – Industrial Minerals [Mineral Perindustrian] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2012/2013 Academic Session June 2013 EBS 339/3- Mineral Economics [Ekonomi Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2012/2013 Academic Session June 2013 EBB 316/3- Corrosions & Degradation [Kakisan & Degradasi] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2012/2013 Academic Session June 2013 EBS 242/3 - Petrography & Ore Microscopy Petrografi & Mikroskopi Bijih] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2013) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2012/2013 Academic Session June 2013 EBS 419/2- Blasting Technology [Teknologi Peletupan] Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2015) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2014/2015 Academic Session June 2015 EBS 328/3 — Prospecting Geochemistry [Geokimia Carigali] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan (2015) UNIVERSITI SAINS MALAYSIA Second Semester Examination 2014/2015 Academic Session June 2015 EBS 339/3 - Mineral Economics [Ekonomi Mineral] Duration • 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 215/3 — Comminution and Sizing [Kominusi dan Pensaizanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 419/2 - Blasting Technology [Teknologi Peletupanl Duration : 2 hours [Masa : 2 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 432/3 — Environmental Chemistry for Engineering Practice [Kimia Alam Sekitar Untuk Amalan Kejuruteraanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS308/3 — Materials Transport Engineering [Kejuruteraan Pengankutan Bahanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 323/3 — Pyrometallurgy [Pirometallurgil Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS 339/3 — Mineral Economics [Ekonomi Mineral] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS328/3 - Geokimia Carigali [Geochemical Exploration] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bahan dan Sumber Mineral, Pusat Pengajian Kejuruteraan (2018) Second Semester Examination 2017/2018 Academic Session May/June 2018 EBS328/3 — Geokimia Carigali [Geochemical Exploration] Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

Bun , Kim Ngun (2012) Characterization Of Cambodian Clays And Their Suitability For Ceramic Tiles Applications. PhD thesis, Universiti Sains Malaysia.

C

Cheah , Wee Keat (2016) Urea And Uric Acid Adsorption By Nanoporous Biomaterials. PhD thesis, Universiti Sains Malaysia.

Chin, Seik Yee (2018) Synthesis And Characterization Of Polyaniline, Graphene And Graphene Polyaniline Nanocomposites. Masters thesis, Universiti Sains Malaysia.

D

Daud, Farah Diana Mohd (2015) Synthesis And Characterization Of Calcium Oxide And Magnesium Oxide Supported Calcium Oxide For Carbon Dioxide Adsorbent. PhD thesis, Universiti Sains Malaysia.

F

Foo , Yin Lin Evon (2012) Fabrication And Properties Of Silicaepoxy Thin Film Composite. Masters thesis, Universiti Sains Malaysia.

G

Ghaleb, Zaid Aws Ali (2016) Preparation And Characterization Of Graphene Filled Epoxy Thin Film Nanocomposite For Electronic Applications. PhD thesis, Universiti Sains Malaysia.

H

Haji Azlan, Umar Al-Amani (2013) The Effect Of Rare-Earth Substitution On The Properties Of Bismuth Titanate Prepared By Low Temperature Combustion Technique. PhD thesis, Universiti Sains Malaysia.

Hassan, Muhammad Hafiz (2014) Effect of the bagging configuration on the properties of vacuum-bagging-only (VBO) - Oven cured in complex-shaped composites. Masters thesis, Universiti Sains Malaysia.

Hassan, Nurfarhana (2018) Probe Drilling Based Prediction Of Rock Mass Strength, Natm-4, Pahang-Selangor Raw Water Transfer Tunnel, Hulu Langat, Selangor, Malaysia. Masters thesis, Universiti Sains Malaysia.

Hazan , Roshasnorlyza (2014) Surface Engineering Of Titanium Based Metal For Cell Interaction. PhD thesis, Universiti Sains Malaysia.

I

Ibrahm Sktani, Zhwan Dilshad (2016) Fracture Toughness Enhancement of Zirconia Toughened Alumina (ZTA) Through Additions Of Combination Of CaCO3 And CaO. PhD thesis, Universiti Sains Malaysia.

K

Khoo, Rong Ze (2014) Mechanical, thermal and morphological properties of poly(lactic acid)/ sugarcane bagasse fiber composites. Masters thesis, Universiti Sains Malaysia.

Krengvirat, Warapong (2013) Development Of Carbon And Potassium-Incorporated Titanium Dioxide Nanotube Arrays For Solar Energy Harvesting Applications. PhD thesis, Universiti Sains Malaysia.

L

Lee , Ting (2015) Methane Adsorption Microcalorimetry By Activated Carbon Fibre Derived from Empty Fruit Bunch Fibre. PhD thesis, Universiti Sains Malaysia.

Loh , Tat Chuang (2016) Synthesis And Property Studies Of Methacrylate Based Poly(Siloxane-Silsesquioxane) Resins. Masters thesis, Universiti Sains Malaysia.

M

Makhsin, Siti Rabizah (2013) Properties Of Gold Nanoparticles And Its Conjugation With Biomolecules For Diagnostic Application. Masters thesis, Universiti Sains Malaysia.

Mat Akhir, Maisara Azad (2016) Development of nanostructured gas sensing material as an ethylene gas detector. Masters thesis, Universiti Sains Malaysia.

Md Razi, Hasniyati (2016) Mechanical and Biodegradable Properties of Hydroxyapatite Coated Magnesium Deposited by Cold Spray. PhD thesis, Universiti Sains Malaysia.

Mohamed Shaari, Shazlin (2016) Characterization and Properties of Chitosan-Filled Rubber Compuonds. PhD thesis, Universiti Sains Malaysia.

O

Ong , Pek Ling (2016) Effect Of Hydrogen Peroxide And Lead Nitrate In The Cyanidation Leaching Of Gold Ore Sample. PhD thesis, Universiti Sains Malaysia.

P

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBB 512-3 PHASE DIAGRAM AND PHASE EQUILIBRA OKT 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2012) EBB 526/3 - Electroic Packaging January 2012. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBS 201-3 - MENDAPAN MINERAL NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1996) EBS 201-3 - MENDAPAN MINERAL OKT-NOV 1996. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBS 201-3 - MENDAPAN MINERAL SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS 201-3 - MINERAL DEPOSITS NOV 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2006) EBS 201-3 MINERAL DEPOSITS OKT-NOV 06. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBS 201/3 MINERAL DEPOSITS (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBS 209-3 - MINERALOGI NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 209-3 MINERALOGI OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBS 322-3 - PEMPROSESAN FIZIKAL MINERAL NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2004) EBS 322-3 PEMPROSESAN FIZIKAL MINERAL OKT 04. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2016) EBS 322/3 PHYSICAL MINERAL PROCESSING (JAN 2016). [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBS 422-2 - EKONOMI MINERAL SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2005) EBS 425-3 - MINERAL PERINDUSTRIAN NOV 05. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBS102-3 - MINERAL I - APRIL 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1997) EBS201 -3 - MENDAPAN MINERAL - SEPT 1997. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (2008) EBS201-3 - MINERAL DEPOSITS - NOVEMBER 2008. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1994) EBS202-3 - MINERAL II - APRIL 1994. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1995) EBS202-3 - MINERAL II - APRIL 1995. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1993) EBS202-3 - MINERAL II - JUN 1993. [Teaching Resource]

PPKBSM, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral (1992) EBS202-3 - MINERAL II - MAC-APRIL 1992. [Teaching Resource]

PPKEE, Pusat Pengajian Kejuruteraan Elektrik & Elektronik EEM 101 PRINCIPLES AND MECHANICS OF MATERIALS [PRINSIP DAN MEKANIK BAHAN] (DECEMBER 2016 / JANUARY 2017). [Teaching Resource]

Pusat Pengajian Kejuruteraan, Bahan & Sumber Mineral (2017) UNIVERSITI SAINS MALAYSIA First Semester Examination 2016/2017 Academic Session December 2016 / January 2017 EBB 113/3 — Engineering Materials [Bahan Kejuruteraanl Duration : 3 hours [Masa : 3 jam]. [Teaching Resource] (Submitted)

R

Rahim, Afikah (2015) The Effect Of The Rockmass Properties And Groundwater Inflow Related To Performance Of Tunnel Boring Machine (Tbm) At Pahang Selangor Raw Water Transfer Tunnel Project (Psrwt. Masters thesis, Universiti Sains Malaysia.

S

Salim, Siti Nur Hajar Abdul (2018) Zinc Oxide, Organoclay And Silica In Crosslinked Polyethylene Composite For Cable Insulation. Masters thesis, Universiti Sains Malaysia.

Sarifuddin, Norshahida (2015) Mechanical, Physical, Thermal And Biodegradability Studies Of Low Density Polyethylenethermoplastic Sago Starch Kenaf Core Flour Biocomposites. PhD thesis, Universiti Sains Malaysia.

Seng , Sophea (2015) Evaluation And Processing Of Andalusite Mineral From Terengganu, Malaysia. Masters thesis, Universiti Sains Malaysia.

Shahabudin, Nor Suhaida (2016) Optimization And Biocompatibility Of Alumina Foam Coated Scaffold For Bone Tissue Engineering Application. Masters thesis, Universiti Sains Malaysia.

Sidek, Mufidah Md (2015) Study On Laminated Natural Rubber (Nr) Latex Based Films For Mould Cleaning Application. Masters thesis, Universiti Sains Malaysia.

T

Tham, Wei Ling (2015) Preparation And Properties Of Poly (Lactic Acid) Halloysite Nanotube Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Tham , Cho Yin (2015) Preparation Of Poly(Lactic Acid) (Pla) Microspheres For Drug Delivery System. Masters thesis, Universiti Sains Malaysia.

Y

Yahya, Hamdan (2016) Formulation And Characterization Of Porcelain Balls From Malaysia Clays. Masters thesis, Universiti Sains Malaysia.

Z

Zakaria, Muhammad Razlan (2015) Enhancement of Mechanical, Thermal and Dielectric Properties of Hybrid Carbon Nanotubes and Alumina in Epoxy Nanocomposites. Masters thesis, Universiti Sains Malaysia.

This list was generated on Tue Jun 25 21:00:51 2024 +08.
Share