Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2013

Basheer, Uday Mowafak (2013) Friction Welding of 6061 Aluminum Alloy with YSZ-Alumina Composite for Improved Mechanical and Thermal Properties. PhD thesis, Universiti Sains Malaysia.

Mhd Noor, Ervina Efzan (2013) Characterization Of Indium Based Low Temperature Solder Alloy And The Effect On Surface Finish. PhD thesis, Universiti Sains Malaysia.

Santiagoo, Ragunathan (2013) Characterization And Properties Of Polypropylene Recycled Acrylonitrile Butadiene Rubber Rice Husk Powder Composites. [Teaching Resource] (Submitted)

Santiagoo, Ragunathan (2013) Characterization And Properties Of Polypropylene/ Recycled Acrylonitrile Butadiene Rubber/ Rice Husk Powder Composites. PhD thesis, Universiti Sains Malaysia.

Sulaiman, Muhammad Azwadi (2013) Effects Of Electrode Materials On Electrical Properties Of Cacu3ti4o12 At 100 Hz – 1 Ghz. PhD thesis, Universiti Sains Malaysia.

A

Abd Wahab, Mohamad kahar (2013) Characterization And Properties Of Thermoplastic Tapioca Starch Based High Density Polyethylene / Natural Rubber Blends. PhD thesis, Universiti Sains Malaysia.

Abdul Malek Ya’acob, Abdul Malek (2013) Kenaf/Glass Hybrid Composites: Preparation, Characterization And Properties. PhD thesis, Universiti Sains Malaysia.

Ahmad, Azliyana (2013) Production Of Gold And Silver Nanoparticles Recovered Through Sonication Of Reflective Metal Layer In Cd-R Waste. Masters thesis, Universiti Sains Malaysia.

Ahmad, Mohammad Shahrulhafiz Basir (2013) Properties Of Recycled Crosslink Polyethylene Filled High Density Polyethylene Composites. Masters thesis, Universiti Sains Malaysia.

Ahmad Azhar, Ahmad Zahirani (2013) SYNTHESIS AND CHARACTERIZATION OF MgO-Cr2O3-ZTA CUTTING TOOL MATERIAL. PhD thesis, Universiti Sains Malaysia.

D

Darong, Chhor (2013) Fabrication And Characterization Of Porous Alumina. Masters thesis, Universiti Sains Malaysia.

F

Faudzi, Ku Nur ‘Izzati Ku Mohamad Faudzi (2013) Studies Of Antimicrobial Agent (Aa) Filled With Polypropylene (Pp) For Antimicrobial Application. Masters thesis, Universiti Sains Malaysia.

H

Haji Azlan, Umar Al-Amani (2013) The Effect Of Rare-Earth Substitution On The Properties Of Bismuth Titanate Prepared By Low Temperature Combustion Technique. PhD thesis, Universiti Sains Malaysia.

Hoang, Thi Bich Diep (2013) The Potential Of Wollastonite As A New Filler For Natural Rubber Compounds. Masters thesis, Universiti Sains Malaysia.

I

Ismail, Syahriza (2013) Formation Of Nanotubular Oxide By Anodization Of Valve Metals. Masters thesis, Universiti Sains Malaysia.

i Asari, Ashraf Rohaniza (2013) Preparation, Properties And Durability Studies Of Hdpe – Kenaf Core Filler Composites. Masters thesis, Universiti Sains Malaysia.

J

Jaafar, Farah (2013) Penghabluran Dalam Sistem Kaca Berasaskan Abu Jerami Padi. Masters thesis, Universiti Sains Malaysia.

K

Kee, Chia Ching (2013) Development Of Carbonated Hydroxyapatite/ Poly(L-Lactide)/ Poly(Vinyl Alcohol) Biocomposites. Masters thesis, Universiti Sains Malaysia.

Khe, Cheng Seong (2013) Role And Correlation Of Synthesis, Size And Morphology To The Magnetic Properties Of Cobalt And Cobalt/Gold Bimetallic Hierarchical Nanostructures. PhD thesis, Universiti Sains Malaysia.

Krengvirat, Warapong (2013) Development Of Carbon And Potassium-Incorporated Titanium Dioxide Nanotube Arrays For Solar Energy Harvesting Applications. PhD thesis, Universiti Sains Malaysia.

L

Lai, Chin Wei (2013) Development Of W03-Tio2 Nanotube Arrays For Water Electrolysis. PhD thesis, Universiti Sains Malaysia.

Lai , Chin Wei (2013) Development Of Wo3-Tio2 Nanotube Arrays For Water Electrolysis. PhD thesis, Universiti Sains Malaysia.

Lee, Xing Min (2013) Effect Of Different Tackifiers On Properties Of Styrene-Grafted Natural Rubber (Snr) And Deproteinized Natural Rubber (Dpnr) Latex Films. Masters thesis, Universiti Sains Malaysia.

Lee, Liu Mei (2013) Characterization and corrosion behaviour of 96.5Sn-3.0Ag-0.5Cu solder on Cu substrate at different reflow reactions. Masters thesis, Universiti Sains Malaysia.

Lee, Thi Bang (2013) Substituted Apatite/Poly-Epsiloncaprolactone Biocomposite As Substrates And Coating On Alphatricalcium Phosphate Foams. PhD thesis, Universiti Sains Malaysia.

Lee , Liu Mei (2013) Characterization And Corrosion Behaviour Of 96.5sn-3.0ag- 0.5cu Solder On Cu Substrate At Different Reflow Reactions. Masters thesis, Universiti Sains Malaysia.

Loo, Siaw Fang (2013) Comparative Toxicity And Persistence Of Pyriproxyfen, Diflubenzuron, And Temephos Against Aedes Aegypti (L.). Masters thesis, Universiti Sains Malaysia.

Lwin, Nilar (2013) Physical And Electromagnetic Properties Of Tm And Gd Substituted Mg-Mn Ferrites. PhD thesis, Universiti Sains Malaysia.

M

Makara, Lay (2013) The Effect Of Nanosilica Filler On Curing Characteristics, Mechanical And Morphological Properties Of Standard Cambodian Natural Rubber Nanocomposites. Masters thesis, Universiti Sains Malaysia.

Makhsin, Siti Rabizah (2013) Properties Of Gold Nanoparticles And Its Conjugation With Biomolecules For Diagnostic Application. Masters thesis, Universiti Sains Malaysia.

Masri, Mohamad Najmi (2013) The Study Of Agar Binder And Super P Additive In Porous Zinc Anode For Zinc-Air Batteries. PhD thesis, Universiti Sains Malaysia.

Mohammad Firdaus, Abu Hashim (2013) Modelling of thermal and charge/discharge cycle behaviors of nickel metal hydride (NI-MH) battery system. Masters thesis, Universiti Sains Malaysia.

Mohd Sabri, Nurul Shafyra (2013) Design of Experiment (Doe) Study Of Hydroxyapatite (Ha) For Load Bearing Application Via 2k Factorial Design. Masters thesis, Universiti Sains Malaysia.

N

Nallis, Kry (2013) The Uv-Shielding Property Of Zr0.7ce0.3o2-Kaolinite/Exfoliated Kaolinite Composites Prepared By Differentsynthesis Methods. PhD thesis, Universiti Sains Malaysia.

Nasution, Tulus Ikhsan (2013) Chitosan Based Acetone Sensor For Detecting Low Concentration Acetone. PhD thesis, Universiti Sains Malaysia.

Noor, Ervina Efzan Mhd (2013) A Research On The Potential Of Local Natural Fiber To Produce Handmade Papers For Drawing, Painting And Printmaking. PhD thesis, Universiti Sains Malaysia.

Nordala, Phoumiphon (2013) Effect Of Mechanical Activation On The Fluxing Properties Of Gua Musang Feldspar And Granite Quarry Dust. Masters thesis, Perpustakaan Hamzah Sendut.

O

Omar , Mohd Firdaus (2013) Static And Dynamic Mechanical Properties And Strain Rate Sensitivity Of Thermoplastic Based Polymers And Composites Using Split Hopkinson Pressure Bar Apparatus. PhD thesis, Universiti Sains Malaysia.

Oon, Hooi Shy (2013) Growth And Physical Characterization Of Native Oxide Thin Film On N-Type Gallium Nitride Substrate By Ti-Iermal Oxidation In Nitrous Oxide Ambient. Masters thesis, Perpustakaan Hamzah Sendut.

P

Pang, Ai Ling (2013) Preparation, Characterization And Properties Of Polypropylene/Waste Tyre Dust/Kenaf Powder Composites. Masters thesis, Universiti Sains Malaysia.

Panhyavisy, Sangkhone (2013) Characterization And Potential Utilization Of Gypsum From Lao Pdr. Masters thesis, Universiti Sains Malaysia.

Phommachanh, Kouth (2013) Effects Of Accelerated Weathering On The Properties Of Polylactic Acid Toughened With An Ethylene Copolymer As An Impact Modifier. Masters thesis, Universiti Sains Malaysia.

R

Rahman, Mohd Fariz Ab (2013) Investigation Of Magnesium Doped Calcium Copper Titanate (Cacu3ti4o12) On Ca And Cu Site Prepared By Solid State Reaction Method. Masters thesis, Universiti Sains Malaysia.

S

Saidin, Hanizam Shah (2013) Reduction Of Malaysian Iron Ore Pellet By Using Coal As Reductant. Masters thesis, Universiti Sains Malaysia.

Syed Salim, Sharifah Aishah (2013) Nio Modification Using Zr4+ And Ca2+ For Dielectric Improvement. Masters thesis, Universiti Sains Malaysia.

T

Tan, Chin Yeong (2013) Impact Response Of Fiber Metal Laminates And Aluminum Composite Sandwich Structures. Masters thesis, Universiti Sains Malaysia.

Tan , Seah Guan (2013) Preparation And Characterization Of Epoxidized Soybean Oil Based Thermoset, Blends And Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Tan , Yizong (2013) Development And Characterization Of Moisture-Blown Natural Rubber Foam Prepared By Microwave Foaming Technique. Masters thesis, Universiti Sains Malaysia.

Tran , Bao Trung (2013) Effect Of Graphite And Nbc On Mechanical Properties Of Aisi304 Binded Wc. PhD thesis, Universiti Sains Malaysia.

V

Vincent, Sheril Rizal (2013) Studies On The Properties Of Hybrid Mineral Fillers Filled Polypropylene Composites. Masters thesis, Universiti Sains Malaysia.

Y

Ya’acob, Abdul Malek (2013) Kenaf/Glass Hybrid Composites: Preparation, Characterization And Properties. PhD thesis, Universiti Sains Malaysia.

Z

Zakaria, Azlila (2013) Penghasilan Hidroksiapatit Menggunakan Kaedah Pengaktifan Mekanik. Masters thesis, Universiti Sains Malaysia.

Zakaria, Zunaida (2013) Compressive Properties And Simulation Of Low Density Polyethylene Foams. PhD thesis, Universiti Sains Malaysia.