Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2010

A

Abdullah, A. Makarimi and Hutagalung, Sabar D. and Lockman, Zainovia (2010) Etching Effect On The Formation Of Silicon Nanowire Transistor Patterned By AFM Lithography. In: Proceedings of the International Conference on Nanotechnology: Fundamentals and Applications , 4-6 August 2010, Ottawa, Ontario, Canada.

Adik, Nik Nur Azza Nik (2010) Use of hydro-geophysics streaming potential (SP) Signals in evaluating environmental friendly Bio-ecological drainage system (BIOECODSTM) Effectiveness. Masters thesis, Universiti Sains Malaysia.

B

Badarulzaman, Nur Azam (2010) Pengaruh Adukan Dan Kepekatan Partikel Silikon Karbida Sebagai Penguat Terhadap Kelakuan Salutan Komposit Matriks Nikel. PhD thesis, Universiti Sains Malaysia.

C

Chua , Tze Ping (2010) The Effect Of Surface Modification Of Multi-Walled Carbon Nanotubes On Properties Of Silicone Rubber Composites. Masters thesis, Universiti Sains Malaysia.

H

Harahap, Hamidah (2010) Kesan Penglitupan Kuratif Ke Atas Sifat-Sifat Tensil Filem Lateks Getah Asli. PhD thesis, Universiti Sains Malaysia.

Huy, Tran Duc (2010) Mechanical And Corrosion BEHAVIOR OF In-SITU PARTICULATES (Al2O3, Tib2, Tic) Reinforced Fe-Al Intermetallic Composites. PhD thesis, Universiti Sains Malaysia.

I

Ismail, Hamisah (2010) Abu Jerami Dalam Kaca, Seramik Kaca Dan Komposit Polimer. Masters thesis, Universiti Sains Malaysia.

Ismail, Hamisah (2010) Abu Jerami Dalam Kaca, Seramik Kaca Dan Komposit Polimer. Masters thesis, Universiti Sains Malaysia.

Ismail, Roniza (2010) Production Of Precipitated Calcium Carbonate (PCC) Using Malaysian Limestone Based Materials Via Continuous Production Technique. Masters thesis, Universiti Sains Malaysia.

Ismail, Siti Isma Hani (2010) Erosion And Sediment Yield Evaluation In Regards Of Erosion Sediment Control Practices (Escp). PhD thesis, Universiti Sains Malaysia.

J

Jani, Nur Aimi (2010) Synthesis And Optimization Of Copper Oxide As P-Type Transparent Conducting Oxide. Masters thesis, Universiti Sains Malaysia.

Jikan, Suzi Salwah (2010) Evaluation On Flow Behaviour Of Polypropylene/Kaolin Composites At High Shear Stress. PhD thesis, Universiti Sains Malaysia.

K

Keokangdong, Sengphet (2010) Development Of Porous Sintered Alumina By A Sponge Scaffolding Method And Pore Forming Agent Using Natural Bioresources. Masters thesis, Universiti Sains Malaysia.

L

Le , Minh Hai (2010) Preparation Of In-Situ Carbides Reinforced Hybrid Copper-Based Composite By Mechanical Alloying And Its Characterization. Masters thesis, Universiti Sains Malaysia.

Lim, Shu Lee (2010) Formation Of Ceria Buffer Layer For Yba2cu3o7-X Superconductors. Masters thesis, Universiti Sains Malaysia.

M

Majid, Rohani Abdul (2010) Preparation And Properties Of Low Density Polyethylene (LDPE) / Thermoplastic Sago Starch (TPSS) / Kenaf Composites. Masters thesis, Universiti Sains Malaysia.

Mohammed, Kahtan S. (2010) Study Of The Effect Of Sintering Parameters On Characteristics Of W-Bronze Composites Prepared Via Different Densification Techniques. PhD thesis, Universiti Sains Malaysia.

N

Neoh , Siew Bee (2010) Effect Of In-Situ Vulcanization Of Styrene Modified Natural Rubber In Adhesive And Rubber Toughened Polystyrene Applications. PhD thesis, Universiti Sains Malaysia.

Nosbi, Norlin (2010) Studies On The Properties Of Pultruded Kenaf Fiber Reinforced Unsaturated Polyester Composites. Masters thesis, Universiti Sains Malaysia.

Nugroho, Cahyo Budi (2010) Pemeriksaan Filem SiO2 Yang Dienapkan Di Atas Susbtrat Si Melalui Teknik Pirolisis Semburan Ultrabunyi. Masters thesis, Universiti Sains Malaysia.

Q

Quah, Hock Jin (2010) Investigation Of Metal-Organic Decomposed (MOD) Cerium Oxide (Ceo2) Gate Deposited On Silicon And Gallium Nitride Substrates Via Spin-On Coating Technique. Masters thesis, Universiti Sains Malaysia.

R

Rahim, Azura Abdul (2010) Flow Behaviour And Viscoelasticity Of Polypropylene-Kaolin Composites. Masters thesis, Universiti Sains Malaysia.

Rejab, Nik Akmar (2010) Sintesis Dan Pencirian BaTiO3 Terdop Nd Sebagai Antena Penyalun Dielektrik (DRA). Masters thesis, Universiti Sains Malaysia.

Ridhai, Mohammed Noori (2010) Study Of Wettability And Corrosion Behavior Of Sn-37pb, Sn-8zn-3bi And Sn-3ag-0.5cu Solders. Masters thesis, Universiti Sains Malaysia.

S

Sharif, Nur Shafiza Afzan (2010) Effect Of Lanthanum Oxide (La2O3) Addition On The Properties Of Calcium Copper Titanate (CaCu3Ti4O12). Masters thesis, Universiti Sains Malaysia.

T

Tram, Nguyen Xuan Thanh (2010) Synthesis Of Carbonate-Substituted Hydroxyapatite By A Mechanical Activation Method. Masters thesis, Universiti Sains Malaysia.