Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Monograph" and Year is 2021

A

Abdullah, Nadiah Aqilahwati (2021) Work-Related Musculoskeletal Risks And Electromyographic Analysis Of The Upper Body Muscles During Oil Palm Pruning Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adzman, Muhammad Syazwan Kamarul (2021) Comparison Of Carbon Footprints Between Internal Combustion Engine, Hybrid And Electric Vehicles Selected Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ahmad, Nur Hidayah (2021) Printed Thin Film On Copper And Pcb For Corrosion Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ang, Jia Jun (2021) Effect Of Fringe Parameter On Phase Measuring Deflectometry Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Anorhisam, Megat Naiman Megat (2021) High Strain Rate And Quasi-Static Compressive Failure Of Unidirectional Hybrid Kenaf Glass Fibre-Reinforced Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aza, Muhamad Farhan Husaini (2021) Simulation Of Passenger Flow And Waiting Time For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Mohd Luqman Hakim Md (2021) Study On Vibration Level Of Agriculture Machinery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azlee, Muhammad Haziq (2021) FEM Simulation on Stencil Bending Due to Squeegee Load during Solder Paste Stencil Printing Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azlin, Mohamad Akmal Fahim (2021) Tribological Properties Of Vegetable Base Oils With. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Azman, Muhammad Aliff Zikri (2021) Study Of Crack Propagation On Component (Multilayer Ceramic Capacitor) During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

C

Chong, Shin Yun (2021) Implications Of Intravascular Catheter In A Blood Vessel During Medical Treatment Using Computational Fluid Dynamics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chong, Zhi Chien (2021) Design And Analysis Of Rubber Tapping Machine Using Ansys Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Choo, Kinn (2021) Performance Comparison Of Intelligent Tuning Methods Using Pid-Afcga And Pid-Afcpso In Attenuating The Vibration Of The Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Choo, Then Xiang (2021) Optimization Of Customized Tetra-Flute Drill Reamer For A Better Hole Quality In Single Shot Drilling Of Cfrp Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

E

Edmund, Ung Eng Soon (2021) Design And Development Of Engine Control System For Advanced Diesel Engine Research. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

F

Fauzi, Farah Aina (2021) Numerical Analysis Of The Combustion Characteristic Of Compression-Ignition Engine For The Application Of Biodiesel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

G

Goh, Wei Shing (2021) Influence Of Epoxy Viscosity And Gold Wire Size On Led Encapsulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

H

Harith, Ahmad Asri Abd (2021) Hybridization Of Natural Fibre Polymer Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hashimi, Nur Hatin Raihana (2021) Wear Analysis On Different Customized Twist Drill Bit Designs In Drilling Cfrp Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hayzir, Mohammad Ikhmal Fitri Mohd (2021) Development And Analysis Of Rotordynamics System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hing, Chen Teng (2021) Effect Of Vegetable Oil On Surface Roughness During Turning Of Aisi 1020 Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

I

Ishak, Khairul Aiman (2021) Assessment Of Force Required During Cutting Oil Palm Fronds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ishak, Muhammad Hanafi (2021) Analysis Of Pseudoelastic Deformation Cycles Of Gradiently Aged Niti Shape Memory Alloys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohamad Azren (2021) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

J

Jaafar, Muhamad Aliff Ikmal (2021) Determination Of Vortex Formation At Temenggor Tnb Hydropower Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

John, Lorraine Pidang (2021) Structural Analysis Of Drone Propeller Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

K

Kadir, Mohammad ‘Asri (2021) Combustion Characteristics Of Blends Of Kerosene And Cooking Oil At Various Fuel-Air Equivalence Ratio Simulation Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamarulzaman, Muhammad Amir (2021) Acoustic Performance Study Of 3d Printed Micro-Perforated Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamaruzaman, Muhammad Faris Shauqi (2021) Hole Quality Assessment Of Drilled Carbon Fiber Reinforced Polymer (Cfrp) Panel Using Various Drill Bit Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kanyan, Laura Jasmine Thomas (2021) Data Mining Approach To Classify Covid-19 Severity By Clinical Symptoms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kasim, Nor Asikin (2021) The Effect Of Impingement Hot Air On Temperature Distribution Of The Flat Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khairuzi, Muhammad Haris (2021) An Optimization Of Carbonized Empty Fruit Bunch Briquettes And Biomass Producer Gas Quality Characteristics Using Response Surface Method (Rsm). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khalid, Muhammad Syazwan Abdul (2021) Pneumatic As A Future Or Alternative Energy Storage System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khor, Khye Jim (2021) Automatic Grading System Of Incoming Raw Unclean Edible Bird Nest Using Deep Learning Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kumar, Denesh Kumar Siva (2021) Regenerative Braking System For Through-The Road Parallel Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

L

Lee, Ann Yen (2021) Tribological Properties Of Palm Oil-Based Grease With Nano Particle Additive. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Wing Siong (2021) A Comparison Of Design Approach Using Topology Optimization Design And Parametric Design Of Suspended Handle With Multi Constraints Optimization For Vibration Attenuation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Leong, Yong Sheng (2021) Simulation Of Series And Parallel Hydraulic Hybrid Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Liew, Yu Liang (2021) Biomechanical Markerless Motion Classification Based On Stick Model Development For Shop Floor Operator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Kean Siang (2021) Implementation of Multigrid Method for Solving Coupled Problem. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lim, Mei Hui (2021) Sound Absorption Of Micro-Perforated Panel Made By Oil Palm Fibre. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lingam, Darwineswaran Raja (2021) Running-Related Injury Classification For Professional Runners. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

M

M.Ghazali, Nor Maisarah (2021) Assessments Of Awkward Postures Associated With Biomechanical Forces And Muscle Activations During Collecting Oil Palm Fresh Fruit Bunches. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mafazi, Muhammad Asri Asyraaf (2021) Performance Characterictics Of Single Stage Micro Gas Turbine (Mgt) Running On Liquid Biofuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mazlan, Muhammd Izzat Syafiq (2021) Development And Characterization Of Producer Gas Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Muniary, Kaalidass (2021) Experimental Investigation On The Effect Of Epoxy On The Encapsulation Process In Light Emitting Diode Manufacturing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

N

Najib, Mohammad Amirul Akmal Mohd (2021) Development Of A System For Measuring Pedal Force In Arm Leg Pedal Exercise. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Narendaran, Harisangar (2021) Biomechanics Analysis During Cutting Oil Palm Fronds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Iskandar Mirza Mohd (2021) Effect Of Similar And Dissimilar Aluminum Alloy Tailor Welded Blank To Twist Springback. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nayagam, Brian Pravinnayagam Adie (2021) Analysis Of Vibration Characteristics In Centrifugal Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nazarudin, Muhammad Zaim Hanif (2021) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Han We (2021) Finite Element Analysis Of Polydimethylsiloxane (Pdms) Strain Sensor For The Spinal Fusion Monitoring. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Woon Li (2021) Identification Of Flow Blockage Levels In Centrifugal Pump By Machine Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Yie Yen (2021) Non-Linear Contact Finite Element Analysis Of Split Hopkinson Incident Bars Under Impact Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nga, Eng Fon (2021) Residual Gratings Removal In Moiré Pattern Using Autoencoder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

O

Ong, Yong Shien (2021) Design And Fabrication Of Ankle Foot Orthosis Utilising 3d Scanner And 3d Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

P

Prbagaran, Sritharan (2021) Development And Characterization Of A Small-Scale Self-Sustained Steam-Biomass Gasifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

R

Rajoo, Tanish (2021) Distracted Driving Classification Based On Driving Skills In Females. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Razak, Mohamad Ifhami Ab (2021) The Main Factors Affecting Choice Of Vehicles Amongst New Generations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rozani, Nurul Rifhani (2021) Simulation Model Of An Air Freshener Flows In A Room By An Automatic Spray. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

S

Sahabarudin, Mohammad Nor Fikri (2021) Investigation Of Gold Wire Attachment During Led Encapsulation Process Using Computational Fluid Dynamic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sahshidi, Abdul Malik Mohd (2021) Review On The Implementation Of Fourth Industrial Revolution (Ir4.0) In Malaysian Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Salim, Muhammad Razin (2021) Developing Operation And Analytics Model To Predict And Optimize Selective Manufacturing In Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sathiaseelan, Nagentheran (2021) Investigation Of Roadside Wind Energy The Harvesting Mechanism. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahbuddin, Muhammad Fawwaz (2021) Investigation Of Sea Wave Point Absorber (The Energy Conversion System). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahrin, Siti Asiah Ismam (2021) A Study Of Anisotropic Dependent Toughening Mechanisms Of Cortical Bone Under Monotonic Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shahruddin, Nabil Syamim (2021) Design And Fabrication Of Shape Memory Alloy Heat Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sha’ari, Ahmad Syafiq Nazri (2021) Numerical Investigation Of Dva In Attenuating The Transmitted Handarm Vibration From The Motorboat Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shukri, Mohamad Akmal Mohd (2021) A Study Of The Circulation Of Covid-19 Viruses Flow In A Particular Space. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shukry, Mohamad Danial Mohd (2021) 3d Scanner App For New Product Development Due To Covid-19 Pandemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Siew, Teng Yi (2021) Cooling Of Photovoltaic Panel Using Water-Cooled System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Suhaimi, Saiful Anwar (2021) On The Demand Of Electric Vehicles In Malaysia And Its Potential, Statistical Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Suhatri, Nur Syakila (2021) Witness Simulation Of Flight Arrival And Departure For One Runaway Airport Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

T

Teoh, Chin Xuan (2021) Blockchain Readiness Assessment For Malaysian Organizations And Challenges To Adopt Blockchain Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

V

Vasuthaven, Arvind Ganeesh (2021) Study Of Wire Arc Additive Manufacturing And Potential In Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

W

Wong, Jer Jian (2021) Heat Dissipation Enhancement Using Graphene Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Kok Yung (2021) Impingement Flow Study on Temperature Profile of Concave Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Wei Cong (2021) The Impingement Flow Study on the Temperature Profile Perforated Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Y

Yaacob, Nuradlin Athirah (2021) Effect Of Volume Fraction For Different Thermophysical Properties Of Carbon Nanotube Nanofluid. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Jun Heng (2021) Experimental And Finite Element Analysis Of Contact Behavior In Lubricated Rolling Contact. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Kah Weng (2021) Development Of Ultrasonic Cautery System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yew, Jia Jing (2021) Application Of Micro Perforated Panel On The Safety Earmuff. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Z

Zainol, Raja Ahmad Shurim Raja (2021) Investigation Of Sea Wave Point Absorber, The Dual-Direction Mechanism. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zaki, Muhammad Al Fateh Mohammad (2021) Development Of Power Assist Control System Of Hydraulic Hybrid Vehicle (Hhv). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zubir, Ahmad Ikhwan Mohd (2021) Full-Wave Analysis Of Air-Filled Substrate Integrated Waveguide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zulbakri, Mohammad Luqman (2021) Experimental Study Of The Effects Of Egg Yolk Oil (Eyo) On Emulsified Biofuel Properties And Compression Ignition (Ci) Engine Performance Improvement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Zulkifle, Muhammad Syamim (2021) Correlation Between Pull-Out Strength And Insertion Strain Field In Relation To Bone Screw Insertion Angle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)