Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2019

A

Abd Razak, Ahmad Shaiful (2019) Preparation And Characterization Of Poly (Acrylate) Emulsion For Pour Point Depressant Application. Masters thesis, Universiti Sains Malaysia.

Abdullah, Nabihah (2019) Effect Of Indium Addition On Microstructure, Wettability, Shear Strength And Creep Behavior Of Sn100c Solder. Masters thesis, Universiti Sains Malaysia.

Abdullah, Nabihah (2019) Effect of indium addition on microstructure, wettability, shear strength and creep behavior of sn100c solder. Masters thesis, Universiti Sains Malaysia.

Abidin, Nurul Zawani Zainal (2019) Influence Of Acidic Calcium Phosphate Solution Concentration On The Properties Of Dicalcium Phosphate Dihydrate Coated On Β-Tricalcium Phosphate Pellets. Masters thesis, Universiti Sains Malaysia.

Abu Bakar, Nur Adriana Nazifa (2019) Effect Of Grain Refinement Process Using Equal Channel Angular Pressing On The Properties And Corrosion Behaviour Of Sn-3.0ag-0.5Cu Solder. Masters thesis, Universiti Sains Malaysia.

Ahmad, Norazirah (2019) Modelling The Effect Of Particle Breakage In Comminution Machine. Masters thesis, Universiti Sains Malaysia.

Aldhire, Tarek Mokhtar Abubaker (2019) Effect Of Additives On Zinc Silicon Carbide Composite Coating On Mild Steel By Electrodeposition. PhD thesis, Universiti Sains Malaysia.

Anuar, Muhammad Firdaus (2019) Friction Stir Welding Of Cryorolled Al 5083 Alloy Optimization Of Process Parameters Using Taguchi Technique. Masters thesis, Universiti Sains Malaysia.

Arivalakan, Sarasijah (2019) Fabrication Of Iron Oxide Nanoparticles 3-Aminopropyltriethoxysilane Modified Electrode For Cd (Ii) Ions And Pb (Ii) Ions Detection. Masters thesis, Universiti Sains Malaysia.

Aziz, Nazatul Shafiqah Abdul (2019) Cotton Candy Machine Explore Its Potential For Fabrication Of Polymer Microfiber For Vascular Tissue Engineering Application. Masters thesis, Universiti Sains Malaysia.

B

Bakhtiar, Nur Suraya Anis Ahmad (2019) Preparation And Characterization Of Muscovite-Carbon Nanotubes Epoxy Layered Silicate Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Bashirom, Nurulhuda (2019) Anodic Zirconium Dioxide-Based Nanotubes For Photoreduction Of Hexavalent Chromium (Cr(Vi). PhD thesis, Universiti Sains Malaysia.

Bee, Soo Ling (2019) Preparation and characterization of asymmetric chitosanbiogenic hydroxyapatite composite membrane for guided bone regeneration. Masters thesis, Universiti Sains Malaysia.

C

Cheng, Shu Yen (2019) Development Of Poly(Lactic Acid) Microspheres/Gelatin Coated Beta-Tricalcium Phosphate Scaffold For Bone Tissue Engineering Application. Masters thesis, Universiti Sains Malaysia.

D

Darus, Fadilah Mohd (2019) Fabrication And Characterization Of Carbonate Apatite Scaffolds Coated With Alginate And Gelatin. Masters thesis, Universiti Sains Malaysia.

F

Faiezah, Hashim (2019) Preparation And Characterisation Of Ethylene Vinyl Acetate/Natural Rubber/Mengkuang Leaf Fibre Thermoplastic Elastomer Composites. PhD thesis, Universiti Sains Malaysia.

H

Hasan, Nurliyana Abu (2019) Titanium Dioxide Formation Via Anodization And Thermal Oxidation For Photoreduction Of Chromium (Vi). Masters thesis, Universiti Sains Malaysia.

I

Ibrahim, Najwa (2019) Chlorination Of Nitrided Malaysian Ilmenite Concentrate Reduced With Polypropylene And Coal. Masters thesis, Universiti Sains Malaysia.

Ibrahim, Nurul Farhana (2019) Synthesize And Characterization Of Bioactive Glass Powder Based On Sio2-Cao-Na2o-P2o5 System. PhD thesis, Universiti Sains Malaysia.

Ishak, Mohamad Nizam (2019) Electrophoretic Deposition Of Cdse Nanoparticles Photoanode For Quantum Dots Sensitized Solar Cells. PhD thesis, Universiti Sains Malaysia.

Ivy, Gan (2019) Extraction Of Nanocellulose And Characterization Of Migration Behaviour For Poly(Lactic Acid) Nanocellulose Silver Nanocomposite. Masters thesis, Universiti Sains Malaysia.

J

Jaafar, Hidayani (2019) Modified Dye-Sensitized Solar Cell (Dssc) For Enhancement Of Photovoltaic Properties. PhD thesis, Universiti Sains Malaysia.

K

Karim, Ahmad Fikri Abdul (2019) Preparation And Characterization Of Kenaf Filled Natural Rubber Latex Foam. PhD thesis, Universiti Sains Malaysia.

Khairuddin, Nur Aishahatul Syafiqa Mohammad (2019) Properties Enhancement Effect Of The Electrosprayed Carbon Nanotube Coating On Glass Fibre Epoxy Laminated. Masters thesis, Universiti Sains Malaysia.

Khor, Jia Yen (2019) Investigation Of Surface Properties For Self-Cleaning Coating On Ceramic Wall Tiles. Masters thesis, Universiti Sains Malaysia.

L

Lai, Ngoc Thien (2019) Fabrication And Characterisation Of Magnetorheological Elastomers Based On Natural Rubber, Carbonyl Iron And Waste Natural Rubber Glove Powder. Masters thesis, Universiti Sains Malaysia.

Lim, Keemi (2019) Tensile, Thermal And Uv-Resistance Properties Of Poly(Lactic Acid)/Zinc Oxide Treated Halloysite Nanotubes Nanocomposites. Masters thesis, Universiti Sains Malaysia.

M

Mad Naser, Mohamad Azwan (2019) Development Of An Affordable Curemeter To Monitor Cure Characteristics Of Unsaturated Polyester Resin. Masters thesis, Universiti Sains Malaysia.

Mamat @ Mohamad Nor, Normahira (2019) Gentamicin-Loaded Poly (Lactic Acid) Microsphere Corporated Chitosan-Coated Carbonate Apatite Scaffold. PhD thesis, Universiti Sains Malaysia.

Md Rasib, Siti Zalifah (2019) Synthesis, Characterization And Properties Of Chitosan-Poly (Methacrylic Acid-Co-N-Isopropylacrylamide) Hydrogel For Drug Delivery. PhD thesis, Universiti Sains Malaysia.

Md. Yusof, Nur Qurrahtin A’ini (2019) Stability Analysis Of Construction Design Reservoir Slopes Based On Numerical Simulation At Ulu Jelai Hydroelectric Dam Project, Cameron Highland, Pahang, Malaysia. Masters thesis, Universiti Sains Malaysia.

Mohamad Nor, Noorhashimah (2019) Development Of Working Electrode Modified By Iron Oxide Nanoparticles For Glucose Biosensor Applications. PhD thesis, Universiti Sains Malaysia.

Mohammadi, Hossein (2019) Synthesis And Characterization Of Strontium And Cobalt Doped Akermanite Bioceramics. PhD thesis, Universiti Sains Malaysia.

Mohd. Moslim, Nur Atiqqah (2019) Synthesis And Characterization Of Mg-Substituted Biphasic Calcium Phosphate. Masters thesis, Universiti Sains Malaysia.

Moksin, Nordalila (2019) Development Of Magnetorheological Elastomers Based On Natural Rubber And Industrial Waste Nickel Zinc Ferrite. Masters thesis, Universiti Sains Malaysia.

Muthalib, Nurhidayah Abdul (2019) Raw Material Characterization And Reductive Leaching Of Low Grade Manganese Ore With Bamboo Sawdust In Sulphuric Acid. Masters thesis, Universiti Sains Malaysia.

N

NA, Subagja (2019) Synthesis Of rGO/TiO2 Nanowires Derived By Thermal Oxidation Of Titanium As A Photocatalyst For Cr(VI) Reduction. Masters thesis, Universiti Sains Malaysia.

Nguyen, Hoang Trinh (2019) Development Of Palm Kernel Oil Polyol - Based Shape Memory Polyurethane With Polyethylene Glycol (Peg) And Poly Caprolactone (Pcl) As Soft Segment. Masters thesis, Universiti Sains Malaysia.

O

Ooi, Chee Heong (2019) P-Cresol Adsorption And Hemocompatibility Study On Nanoporous Hydroxyapatite. PhD thesis, Universiti Sains Malaysia.

R

Redin, Hanna Bakar (2019) Effect Of Aging Time, Calcination And Sintering Temperature To Β-Tricalcium Phosphate (Β-Tcp). Masters thesis, Universiti Sains Malaysia.

Ridhuan, Nur Syafinaz (2019) Functionalization Of Zinc Oxide Nanorods For Glucose Biosensor Application. PhD thesis, Universiti Sains Malaysia.

S

Satia, Mohd Saidina Dandan (2019) Fabrication And Characterization Of Graphene-Based Ink. PhD thesis, Universiti Sains Malaysia.

Sazalli, Nurliyana Abu Hasan (2019) Titanium Dioxide Formation Via Anodization And Thermal Oxidation For Photoreduction Of Chromium (Vi). Masters thesis, Universiti Sains Malaysia.

Shaik Abdul Wahab, Shaik Abdul Rahman (2019) Mineralogical And Deportment Study Of Gold Using Diagnostic Leaching Experiment. Masters thesis, Universiti Sains Malaysia.

Shukri, Nafeesa Mohamad (2019) Investigation On The Properties Of Rubber Vulcanizates For Anti-Vibration Applications Effects Of Different Rubber And Particle Size Of Carbon Black. Masters thesis, Universiti Sains Malaysia.

Shukri, Nafeesa Mohamad (2019) Investigation On The Properties Of Rubber Vulcanizates For Anti-Vibration Applications Effects Of Different Rubber And Particle Size Of Carbon Black. Masters thesis, Universiti Sains Malaysia.

Soaid, Nurul Izza (2019) Synthesis Of Free Standing Anodic Zro2 Nanotubes In Potassium Carbonate Ethylene Glycol Electrolyte For Photocatalyst Application. Masters thesis, Universiti Sains Malaysia.

Sopheak, In (2019) Characterization And Process Recovery Of Refractory Gold Ores From Central Belt Malaysia. Masters thesis, Universiti Sains Malaysia.

Suhaimin, Intan Syazana (2019) Properties Of Bioactive Glass Reinforced Polyurethane Scaffold By Solvent Casting/Particulate Leaching Method. Masters thesis, Universiti Sains Malaysia.

Sutanto, Nelvi (2019) Photodegradation Performances Of Low-Density Polyethylene Composites Loaded With Photocatalysts. PhD thesis, Universiti Sains Malaysia.

U

Udayakumar, Sanjith (2019) Characterization And Alkaline Fusion Recovery Process Of Rare Earths And Thorium From Malaysian Monazite. Masters thesis, Universiti Sains Malaysia.