Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2011

A

Abdullah, Abdul Hamid (2011) Preparation And Properties Of High Density Polyethylene (HDPE)/Soya Powder/Kenaf Core Biocomposites. Masters thesis, Universiti Sains Malaysia.

Abidin, Noor Rehan Zainal (2011) Anodization Of Zirconium For The Formation Of High-K Dielectric Zirconia (Zro2) Thin Film. Masters thesis, Universiti Sains Malaysia.

Adnan, Mohd Azam Mohd (2011) Effect of growth temperature and catalyst on the formation of one-dimensional silicon nanostructures via thermal evaporation technique. Masters thesis, Universiti Sains Malaysia.

Ahmad Thirmizir, Mohd Zharif (2011) Characterization Of Kenaf Bast Fibre Filled Poly (Butylene Succinate) Composites: Mechanical, Water Absorption And Weathering Properties. Masters thesis, Universiti Sains Malaysia.

Aldabib, Jamal Moammar Mohamed (2011) Physical, mechanical and environmental properties of denture base poly(methyl methacrylate) filled with hydroxyapatite. Masters thesis, Universiti Sains Malaysia.

Ali Ghaleb, Zaid Aws (2011) Preparation And Properties Of Impact Modified Poly(Lactic Acid)/Kenaf Fiber Composites. Masters thesis, Universiti Sains Malaysia.

Alias, Siti Salwa (2011) Synthesis And Characterization Of Gel Polymer Electrolyte And Zinc Oxide For Photoelectrochemical Cell. Masters thesis, Universiti Sains Malaysia.

Alsharif, Saad Omar (2011) Physical, Mechanical And Environmental Properties Of Dental Resin Composites Based On Hydroxyapatite Filled BIS-GMA / Tegdma. Masters thesis, Universiti Sains Malaysia.

Ang , Karen Huei Ling (2011) Investigation Of Process Time-Delay On Polyimide With Different Thicknesses For Photolithography Process. Masters thesis, Universiti Sains Malaysia.

Awang, Nik Azimatolakma (2011) Hibiscus Rosa-Sinensis Leaf As Coagulant In Wastewater And Leachate Treatments. Masters thesis, USM.

alHareb, Ahmed Omran Salem (2011) Characterization Of Denture Base Poly (Methyl Methacrylate) Reinforced With Alumina/Zirconia Particles. Masters thesis, Universiti Sains Malaysia.

C

Chan, Pooi Quan (2011) Development Of Tetragonal Zirconia Thin Film For Semiconductor Application. Masters thesis, Universiti Sains Malaysia.

Chea , Chandara (2011) Study On Pozzolanic Reaction And Fluidity Of Blended Cement Containing Treated Palm Oil Fuel Ash As Mineral Admixture. PhD thesis, Universiti Sains Malaysia.

Chou, Pui May (2011) Effect Of Various Additives On The Properties Of Poly(L-Lactic Acid)/Poly(Butylene Succinate-Col- Lactate) Blend. Masters thesis, Universiti Sains Malaysia.

Chou, Soklin (2011) Fabrication And Characterization Of Lead Free Pewter Alloys. Masters thesis, Universiti Sains Malaysia.

Chuah, Soo Kiet (2011) Studies Of The Effect Of Post Deposition Annealing To The Ceo2 Thin Film On P-Type Silicon And N-Type Silicon Carbide Substrates. Masters thesis, Universiti Sains Malaysia.

D

Darvishi, Seyed Mahmood Rezaei (2011) Preparation and characterization of collagen grafted poly(dimethyl siloxane) modified films for skin substitute applications. PhD thesis, Universiti Sains Malaysia.

H

Hashim, Md. Amin (2011) Creep And Isothermal Fatigue Behaviour Of Eutectic SnPb, SnBi And SnZn Solders For Microelectronic Packaging At Mildly Elevated Temperatures. PhD thesis, Universiti Sains Malaysia.

Hashim, Nur Hamizah Abdul Ghani @ (2011) Modeling And Optimization Of Isoamyl Acetate Production In Enzyme Catalyzed Esterification. Masters thesis, Universiti Sains Malaysia.

Hayeemasae, Nabil (2011) The Curing Characteristics, Thermal And Mechanical Properties Of Recycled Poly (Ethylene Terephthalate) And Hybrid Recycled Poly (Ethylene Terephthalate) Filled Natural Rubber Compounds. Masters thesis, Universiti Sains Malaysia.

Ho , Chun Hoong (2011) Antimicrobial And Antioxidant Activities Of Orthosiphon Stamineus Benth. With Emphasis On Rosmarinic Acid Content. Masters thesis, Universiti Sains Malaysia.

I

Idris, Mohd Nazri (2011) Penghasilan Karbon Teraktif Daripada Kelongsong Biji Getah Sebagai Bahan Penjerap Untuk Penyingkiran Pencelup. Masters thesis, Universiti Sains Malaysia.

Idrus, Siti Suhaida (2011) Characterization And Properties Of Ultrafine Silica As A Filler In Natural Rubber Compounds. Masters thesis, Universiti Sains Malaysia.

Islam, Noor Zalikha Mohamed (2011) Effect of pro-degradant additive on behaviour and kinetic degradation of polypropylene film. Masters thesis, Universiti Sains Malaysia.

Ismail, Yanny Marliana Baba (2011) Characterization And Properties Of Synthesized And Sintered Carbonated Hydroxyapatite. Masters thesis, Universiti Sains Malaysia.

J

Jaafar, Che Nor Aiza (2011) Effects Of Mg, Si And Cu On Ageing Response Of Dilute 6XXXX Series Aluminium Alloys. PhD thesis, Universiti Sains Malaysia.

Jaafar, Hidayani (2011) Effect Of CaO, CuO AND V2O5 On Barium Zinc Tantalate (BZT) Dielectric Properties. Masters thesis, Universiti Sains Malaysia.

Jamaludin, Abdul Rashid (2011) Kesan Penambahan CaCO3 Terhadap Ciri Licau Hablur ZnO. PhD thesis, Universiti Sains Malaysia.

Jamil, Noorina Hidayu (2011) Effect of jet mill operating parameters during the production of ultrafine limestone. Masters thesis, Universiti Sains Malaysia.

K

Koh, Jeremy Chee Hao (2011) Synthesis of TiO2 nanotube arrays and preparation of agar based gel polymer electrolyte for dye-sensitized solar cell. Masters thesis, Universiti Sains Malaysia.

L

Lee, See Yau (2011) Synthesis Of Zinc Selenide Coated By Zinc Sulfide Nanoparticles Via Modified Polyol Method. Masters thesis, Universiti Sains Malaysia.

Lew, Kam Chung (2011) Effect Of Tetramethylammonium Hydroxide (TMAH) Etchant On The Formation Of Silicon Nanowires Transistor Patterned By Atomic Force Microscopy (AFM) Lithography. Masters thesis, Universiti Sains Malaysia.

Lew, Kien Seng (2011) Synthesis And Characterisation Of Mesoporous Hydroxyapatite Bioceramics. Masters thesis, Universiti Sains Malaysia.

Liong , Wai Lap (2011) Silicon Nanoparticles Synthesized Via Microemulsion With Various Parameters. Masters thesis, Universiti Sains Malaysia.

Liu, Wei Wen (2011) Synthesis Of Single-Wall Carbon Nanotube Via CVD Growth Mechanism. PhD thesis, Universiti Sains Malaysia.

M

Mahadar, Marliana Mohd (2011) Effect Of Empty Fruit Bunches (EFB) Based Lignin On The Properties Of Epoxy EFB Fiber Composite. Masters thesis, Universiti Sains Malaysia.

Mahir, Norjulia Ahmad (2011) Curing Characteristics, Tensile Properties And Morphology Of Kenaf Fibre Filled Natural Rubber Composites. Masters thesis, Universiti Sains Malaysia.

Marno, Marini (2011) Multiaxial Fatigue Behaviour Of Heat Treated 6061 Aluminium Alloy. Masters thesis, Universiti Sains Malaysia.

Marno, Marini (2011) Multiaxial Fatigue Behaviour Of Heat Treated 6061 Aluminium Alloy. Masters thesis, Universiti Sains Malaysia.

Mohd Zaharri, Nur Diyana (2011) Characterization And Flammability Of Ethylene Vinyl Acetate (Eva)/Zeolite Composites. Masters thesis, Universiti Sains Malaysia.

Munusamy, Sri Raj Rajeswari (2011) Numerical And Experimental Studies On Production Of Fine Silica In An Opposed Fluidized Bed Air Jet Mill. PhD thesis, Universiti Sains Malaysia.

N

Nik Noriman , Zulkepli (2011) Characterization And Properties Of Styrene Butadiene Rubber/Recycled Acrylonitrilebutadiene Rubber (SBR/NBRr) Blends. PhD thesis, Universiti Sains Malaysia.

Nik Roseley, Nik Roselina (2011) Synthesis And Characterization Of Nickel Nanoparticles Via Polyol Method For Biomedical Application. Masters thesis, Universiti Sains Malaysia.

Nordin, Razif Muhammed (2011) Characterization and properties of linear low density polyethylene/poly(vinyl alcohol) blends. PhD thesis, Universiti Sains Malaysia.

O

Ooi, Zhong Xian (2011) Preparation And Properties Of Biodegradable Polymer Blended Film Based On Polyvinyl Alcohol And Tropical Fruit Waste Flour. Masters thesis, Universiti Sains Malaysia.

Othman, Muhammad Bisyrul Hafi (2011) Sintesis Dan Struktur Sifat-Sifat Hubugan (SPR) Polimida Yang Mengandungi Segmen Silicoe Untuk Aplikasi Optoelektronik. Masters thesis, Universiti Sains Malaysia.

P

Phanny, Yos (2011) Effect of different origin of natural rubber, carbon black loading, and vulcanization systems on properties of natural rubber compounds. Masters thesis, Universiti Sains Malaysia.

R

Ramly, Ahmad Faizal Mohd (2011) Multiwall Carbon Nanotube (MWCNT), MWCNT / Carbon Black (CB) And MWCNT / Silica Hybird Fillers Filled Natural Rubber Nanocomposites. Masters thesis, Universiti Sains Malaysia.

Razali, Mohd Amin Ahmad (2011) A Study Of Polydadmac Induced Flocculation In Treatment Of Pulp And Paper Mills Wastewater. Masters thesis, Universiti Sains Malaysia.

Rezaei Darvisid, Seyed Mahmood (2011) Preparation And Characterization Of Collagen Grafted Poly(Dimethyl Siloxane) Modified Films For Skin Substitute Applications. PhD thesis, USM.

S

Safiee, Sahnizam (2011) Characterization And Modeling Of Pultruded Jute Fibre Reinforced Unsaturated Polyester Composite. Masters thesis, Universiti Sains Malaysia.

Safiee, Sahnizam (2011) Characterization And Modeling Of Pultruded Jute Fibre Reinforced Unsaturated Polyester Composite. Masters thesis, Universiti Sains Malaysia.

Sam, Sung Ting (2011) Preparation, Characterization And Properties Of Degradable Linear Low Density Polyethylene/Soya Powder Blends. PhD thesis, Universiti Sains Malaysia.

Samad, Hamizah Abdul (2011) The Effect Of Glass-Ceramic (GC) Filled Poly(Methyl Methacrylate) Bone Cement Composites. Masters thesis, Universiti Sains Malaysia.

Samsir, Norhazariah (2011) Effect Of Zinc Borate And Filler Loading On The Properties Of Post Biodegradation Meranti Wood Flour Filled Recycled High Density Polyethylene (rHDPE) Composite. Masters thesis, Universiti Sains Malaysia.

Sapiai, Napisah (2011) Effect Of Nb, Cr And W On The High Temperature Oxidation Behavior Of Ti-Al Alloys. Masters thesis, Universiti Sains Malaysia.

Sawal, Nurashikin (2011) Low-Velocity Impact Response Of Thermoplastic Honeycomb Core Sandwich Structure With Aluminium Face Sheet. Masters thesis, Universiti Sains Malaysia.

Shamsuddin, Saidatulakmar (2011) Study On The Effect Of Alumina Reinforcements On Fe-Cr Matrix Composite. PhD thesis, Universiti Sains Malaysia.

Shariff, Khairul Anuar (2011) Properties Of Silver Filled Epoxy Composites For Electrical Conductive Adhesive Applications. Masters thesis, Universiti Sains Malaysia.

Shawi, Hoaida. K. Salem (2011) A Study On The Effect Of a-Cordierite Ceramic Powder As A Filler In Denture Base Poly (Methyl Methacrylate). Masters thesis, Universiti Sains Malaysia.

Subhi, Nur Hawadah Mohd (2011) Fabrication And Characterisation Of Copper Composites Reinforced With Transition Metal Carbides Via Mechanical Alloying. Masters thesis, Universiti Sains Malaysia.

Suffin, Nur Surianni Ahamad (2011) Microstructure And Compressive Properties Of Aluminum Foam Fabricated Using Sintering Dissolution Process. Masters thesis, Universiti Sains Malaysia.

Suffin, Nur Surianni Ahamad (2011) Microstructure and compressive properties of aluminum foam fabricated using sintering dissolution process. Masters thesis, Universiti Sains Malaysia.

Suhariadi, Iping (2011) Formation Of CuAlO2 Thin Films By Ultrasonic Spray Pyrolysis For Photodiode Applications. Masters thesis, Universiti Sains Malaysia.

Sung Ting, Sam (2011) Preparation, Characterization And Properties Of Degradable Linear Low Density Polyethylene soya Powder Blends. PhD thesis, Universiti Sains Malaysia..

T

Tan, Wee Ching (2011) Synthesis of ZnO and styrene-acrylonitrile-based electrolyte for the application of quasi-solid-state dye-sensitized solar cell. Masters thesis, Universiti Sains Malaysia.

Tay, Hong Kang (2011) Natural weathering and hygrothermal aging studies of jute/glass fibres reinforced unsaturated polyester hybrid Composites. Masters thesis, Universiti Sains Malaysia.

Tham, Wei Ling (2011) Effects Of Coupling Agents On The Properties Of Poly(Methyl Methacrylate)/Hydroxyapatite Composites For Denture Base Application. Masters thesis, Universiti Sains Malaysia.

Thirmizir, Mohd Zharif Ahmad (2011) Characterization Of Kenaf Bast Fibre Filled Poly(Butylene Succinate) Composites: Mechanical, Water Absorption And Weathering Properties. Masters thesis, Universiti Sains Malaysia.

V

Vannaladsaysy, Vilay (2011) Preparation and characterizations of poly (L-lactic acid) (plla) blends plla scaffold. PhD thesis, Universiti Sains Malaysia.

W

Wahab, Abdul Karim Abdul (2011) Intermetallic Compound And Reliability Study Of Sac And Snbi Lead Free Solders. Masters thesis, Universiti Sains Malaysia.

Y

Yahya, Siti Rohana (2011) Effect Of Additives On The Mechanical, Solvent Transport And Heat Ageing Properties Of Rubber Vulcanizates. Masters thesis, Universiti Sains Malaysia.

Yeap, Kim Huat (2011) Design Of Low Phase Noise Very High Frequency (VHF) Low Band Voltage Controlled Oscillator (VCO) For Transceiver Application. Masters thesis, Universiti Sains Malaysia.

Yew, Fang Wey (2011) Preparation And Characterization Of Waterborne Acrylic Latex Polymers Pressure-Sensitive Adhesives. Masters thesis, Universiti Sains Malaysia.

Z

Zaki, Nor Nadiha Mohd (2011) Comparative Susceptibility Of Sago, Corn And Potato Starches Towards Acid And Alkali Treatments. Masters thesis, Universiti Sains Malaysia.

Zulkepli, Nik Noriman (2011) Characterization And Properties Of Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber (Sbr/Nbr) Blends. PhD thesis, USM.