Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Thesis" and Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | H | J | K | L | M | O | P | R | S | Z
Number of items: 27.

A

Abd Suki, Nur Syazwani (2017) The Integrated Model For Quality Improvement For Semiconductor Companies. Masters thesis, Universiti Sains Malaysia.

Abdulqawi, Nur Ilham Aminullah (2017) Development Of Reverse Engineering System For Generating 3d Cad Body From 2d Image_875008757. Masters thesis, Universiti Sains Malaysia.

Abu Bakar, Muhamad Husaini (2017) Hybrid Cfd-Nnarx Modelling Of Single Mrf Valve For Visual Servoing. PhD thesis, Universiti Sains Malaysia.

Abu Bakar, Muhamad Husaini (2017) Hybrid Cfd-Nnarx Modelling Of Single Mrf Valve For Visual Servoing. PhD thesis, Universiti Sains Malaysia.

Adnan, Mohd Fitri (2017) Optimization Of V-Bending Of Aluminium Aa6061 Strip Of Non-Uniform Profile Using The Taguchi Method. Masters thesis, Universiti Sains Malaysia.

B

Balasundaram, Mohan Kumar (2017) In Process Roughness Measurement And Tool Nose Radius Wear Assesment In Finish Turning Using Machine Vision. PhD thesis, Universiti Sains Malaysia.

H

Hairudin, Wan Masrurah (2017) Development Of Low Frequency Electromagnetic Vibration Energy Harvester. Masters thesis, Universiti Sains Malaysia.

Hamid, Mohd Fadzli (2017) Performance & Emission Characteristic Of Emulsified Biofuel Application In Diesel Engine. Masters thesis, Universiti Sains Malaysia.

Hamid, Mohd Fadzli (2017) Performance & Emission Characteristic Of Emulsified Biofuel Application In Diesel Engine. Masters thesis, Universiti Sains Malaysia.

Harun, Nurul Aida (2017) Integration Of Dmaic Methodology And Capa Concept For Quality ImprovementIn Semiconductor Industry. Masters thesis, Universiti Sains Malaysia.

Harun, Nurul Aida (2017) Integration Of Dmaic Methodology And Capa Concept For Quality Improvement In Semiconductor Industry. Masters thesis, Universiti Sains Malaysia.

J

Joshua, Chan Ren Jie (2017) Development Of Integrated Lean Six Sigma Model For Small And Medium Enterprise. Masters thesis, Universiti Sains Malaysia.

K

Karh Heng, Leong (2017) Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields. Masters thesis, Universiti Sains Malaysia.

Kiow, Lee Woon (2017) Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision. PhD thesis, Universiti Sains Malaysia.

L

Latiff, Rizman Hariz Abdul (2017) Constraint Estimation Schemes For Semi-Elliptical Surface Cracks Under Tensile And Bending Loads. Masters thesis, Universiti Sains Malaysia.

Lee, Woon Kiow (2017) Detection Of Chipping In Ceramic Cutting Inserts From Workpiece Profile Signature During Turning Process Using Machine Vision. PhD thesis, Universiti Sains Malaysia.

Leong, Karh Heng (2017) Constraint Loss Estimation Schemes In Deep And Shallow Three-Dimensional Crack Tip Fields. Masters thesis, Universiti Sains Malaysia.

Lim, Chong Hooi (2017) Heat Transfer And Deformation Of Flexible Printed Circuit Board With Multi Ball Grid Array Packages. PhD thesis, Universiti Sains Malaysia.

M

Md Yusof, Mursyidah (2017) Automated Core And Cavity Design System For Mould Works Using Generative Method Of Computer Aided Process Planning. Masters thesis, Universiti Sains Malaysia.

Md Yusof, Mursyidah (2017) Automated Core And Cavity Design System For Mould Works Using Generative Method Of Computer Aided Process Planning. Masters thesis, Universiti Sains Malaysia.

O

Ong, Kean Aik (2017) Experimental And Numerical Studies Of Transient Heat Transfer In Electronics Packaging. PhD thesis, Universiti Sains Malaysia.

P

Pang, Goh Ching (2017) Analysis Of Large In-Plane Displacement And Strain In Rubber Using 2-D Scanner-Based Digital Image Correlation. PhD thesis, Universiti Sains Malaysia.

R

Ren Jie, Joshua Chan (2017) Development Of Integrated Lean Six Sigma Model For Small And Medium Enterprise. Masters thesis, Universiti Sains Malaysia.

S

Shaari, Muhammad Farid (2017) Development And Characterization Of The Ionic Polymer Metal Composite Actuated Contractile Water Jet Thruster. PhD thesis, Universiti Sains Malaysia.

Siallagan, Sahala (2017) Impact And Benchmarking Study Toward Technology And Innovation Capabilities On Oil Palm Based Industries. PhD thesis, Universiti Sains Malaysia.

Z

Zainal Abidin, Mohd Fadzlee (2017) Determination Of Porosity Level Of Out Of Autoclave Carbon Epoxy Advanced Composites Using Ultrasonic C-Scan Pulse-Echo Method. Masters thesis, Universiti Sains Malaysia.

Zulkoffli, Zuliani (2017) Partial Pose Estimation Of Rigid Object System Using Cad Database. PhD thesis, Universiti Sains Malaysia.

This list was generated on Mon Feb 6 18:36:37 2023 +08.
Share