Number of items: 40.
Ismail, Ahmad Kamal
(2016)
Performance And Emission Of Coated Porous Medium Burner With Cogeneration.
PhD thesis, Universiti Sains Malaysia.
Abd Rahman, Md Nizam
(2016)
A Model For The Fuzzy Front End Of New Product Development Process.
Masters thesis, Perpustakaan Hamzah Sendut.
Abdul Manap, Abdul Haadi
(2016)
Molecular Mechanics Simulations Of Quartz Etching Process.
Masters thesis, Universiti Sains Malaysia.
Akhir, Maisara Azad Mat
(2016)
Development Of Nanostructured Gas Sensing Material As An Ethylene Gas Detector.
Masters thesis, Universiti Sains Malaysia.
Akhir, Maisara Azad Mat
(2016)
Development Of Nanostructured Gas Sensing Material As An Ethylene Gas Detector.
Masters thesis, Universiti Sains Malaysia.
Ali, Nur Amirah Mohd
(2016)
Simulation And Optimization Of Biodiesel Production From Dimethyl Carbonate In Batch Reactor.
Masters thesis, Universiti Sains Malaysia.
Alisah, Mohamad Izudin
(2016)
Development Of Low Voltage Management Circuit For Low Frequency Vibration Energy Harvesting.
Masters thesis, Universiti Sains Malaysia.
Alisah, Mohamad Izudin
(2016)
Development Of Low Voltage Management Circuit For Low Frequency Vibration Energy Harvesting.
Masters thesis, Universiti Sains Malaysia.
Alwi, Aedrianee Reeza
(2016)
Genetic Variations of Nine Malay Subethnic Groups in Peninsular Malaysia Using
Autosomal and Y-chromosome Short
Tandem Repeats (strs) Analysis.
Masters thesis, USM.
Arab, Ali
(2016)
Experimental Characterization And Neural Network Prediction Of Dynamic Behavior Of Zta With Srco3 And Mgo.
PhD thesis, Universiti Sains Malaysia.
Cham , Chin Long
(2016)
Energy Management System For Controlling Series Hybrid Electric Motorcycle.
PhD thesis, Universiti Sains Malaysia.
Cham , Chin Long
(2016)
Energy Management System For Controlling Series Hybrid Electric Motorcycle.
PhD thesis, Universiti Sains Malaysia.
Chan, Choon Kit
(2016)
2d Human Motion Estimation Modeling For Classification.
PhD thesis, Universiti Sains Malaysia.
Chellvarajoo, Srivalli
(2016)
Nano Particle Reinforced Lead Free Sn–3.0ag–0.5cu Solder Paste For Reflow Soldering Process.
PhD thesis, Universiti Sains Malaysia.
Chellvarajoo, Srivalli
(2016)
Nano Particle Reinforced Lead-Free Sn–3.0Ag–0.5Cu Solder Paste for Reflow Soldering Process.
PhD thesis, Universiti Sains Malaysia.
Dahlani, Warsita
(2016)
Kesan Penambahan Air Dalam Reaktor Haba Bermangkin Bagi Penyingkiran Tar Gas Pengeluar.
PhD thesis, Universiti Sains Malaysia.
Desa, Wan Laailatul Hanim Mat
(2016)
Modelling Bottleneck Factors In A Production Line Using Hybrid Approach.
PhD thesis, Universiti Sains Malaysia.
Gunnasegaran, Prem
(2016)
Experimental And Numerical Nvestigations Of Loop Heat Pipe Performance With Nanofluids.
PhD thesis, Universiti Sains Malaysia.
Hairudin, Wan Masrurah
(2016)
Development Of Low Frequency Electromagnetic Vibration Energy Harvester.
Masters thesis, Universiti Sains Malaysia.
Husain, Husri
(2016)
Ballistic Impact Performance Of Wet Lamination Kega.
PhD thesis, Universiti Sains Malaysia.
Lee , Tze Pin
(2016)
Development Of 3D Microstructures By Using Grayscale Photolithographic Technique.
Masters thesis, Universiti Sains Malaysia.
Manap, Abdul Haadi Abdul
(2016)
Molecular Mechanics Simulations Of Quartz Etching Process.
Masters thesis, Universiti Sains Malaysia.
Mazlan , Ahmad Ahmad Zhafran
(2016)
Active Vibration Control Of Piezo Stack Actuator With Consideration To Hysteresis And Saturation Effects.
PhD thesis, Universiti Sains Malaysia.
Mohamed Pauzi, Muhammad Zaim
(2016)
Signal Response Based On Speed And Reaction Of Otto Cycle Engine.
Masters thesis, Universiti Sains Malaysia.
Mustafa, Shaliza Azreen
(2016)
Comparison Of Parallel Kanban-Base Stock System To Control Multi-Product Multi-Stage Production With Rework Through Simulation.
PhD thesis, Universiti Sains Malaysia.
Mustafa, Shaliza Azreen
(2016)
Comparison of Parallel Kanban-Base Stock System to Control Multi-Product Multi-Stage Production with Rework Through Simulation.
PhD thesis, Universiti Sains Malaysia.
Ong Kean Aik, Kean Aik
(2016)
Experimental and Numerical Studies of Transient Heat Transfer in Electronics Packaging.
PhD thesis, Universiti Sains Malaysia.
Ramachawolran, Kalaivaani
(2016)
Microwave Assisted Torrefaction Of Plantation Residues And Kitchen Waste.
Masters thesis, Universiti Sains Malaysia.
Razali, Rohana
(2016)
Effects Of Stress Relaxation On The Pullout Strength Of Pedicle Screws.
Masters thesis, Universiti Sains Malaysia.
Rosly, Muhammad Aliff
(2016)
Fabrication Of Ipmc Biomimetic Flapping Thruster And Its Speed Control Based On Nafion Membrane.
Masters thesis, Universiti Sains Malaysia.
SEMAN, MOHAMAD TARMIZI ABU
(2016)
Experimental And Computational Study Of Flow Over A Rotating Cylinder With Surface Roughnes.
PhD thesis, Universiti Sains Malaysia.
Shamsuddin, Nur Liyana Mohd
(2016)
Two Dimensional (2d) Nanofabrication Process On Quartz Substrate.
Masters thesis, Universiti Sains Malaysia.
Tony Tan, Hin Joo
(2016)
Thermal Performance Of Computer Micro-Processor Using Microchannel Heat Sink With Nanofluids.
PhD thesis, Universiti Sains Malaysia.
V.Radha, Vigren
(2016)
Attenuation Of Electromagnetic Acoustic Noise From A Variable Speed Induction Motor By Using Dynamic Vibration Absorber.pdf.
Masters thesis, Universiti Sains Malaysia.
V.Radha, Vigren
(2016)
Attenuation Of Electromagnetic Acoustic Noise From A Variable Speed Induction Motor By Using Dynamic Vibration Absorber.
Masters thesis, Universiti Sains Malaysia.
Wong, Ee Fun
(2016)
Crack analysis using extended finite element method with virtual crack closure technique.
Masters thesis, Universiti Sains Malaysia.
Wong , Ee Fun
(2016)
Crack Analysis Using Extended Finite Element Method With Virtual Crack Closure Technique.
Masters thesis, Universiti Sains Malaysia.
Yeoh, Keat Hor
(2016)
Hydrothermal And Vapothermal Carbonization Of Agricultural Wastes To Produce Solid Fuels.
Masters thesis, Universiti Sains Malaysia.
Yeoh, Keat Hor
(2016)
Hydrothermal and Vapothermal Carbonization of Agricultural Wastes to Produce Solid Fuel.
Masters thesis, Universiti Sains Malaysia.
Zaki, Hafizah Hanim Mohd
(2016)
Formation Of Single Phase Niti Shape Memory Alloy Via Solid State Processing In Reducing Environment.
PhD thesis, Universiti Sains Malaysia.
This list was generated on Sun Dec 22 03:45:45 2024 +08.
