Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Monograph" and Year is 2022

Abd Jabar, Muhamad Hafizuddin (2022) Processing Of Red Gypsum Using Hyddrocyclone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Rahim, Muhammad Anwar (2022) Characteristic And Potential Of Perlis Carbonate Rock In The Downstream Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Halim, Mohammad Aminuddin (2022) Simulation Study Of Clinker/Grinding Plant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Jalil, Nurhanisah (2022) Comparison Analysis Of Rock Fragmentation After Blasting Between Imagej Analizer And Wipfrag Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Adzaman, Amir Faisal (2022) Study On The Rock Quality Designation (RQD) And Groundwater Cavity Of The Kuala Lumpur Limestone Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Muhammad Hamizan (2022) Lead Removal Through The Adsorptions Of Reactivated Carbon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Amanda Kwok, Si En (2022) Electrochemical Characterization Of Tin Electrode In Synthetic Seawater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ang, Chai Pin (2022) Effect Of Multi-Wall Carbon Nanotubes On The Performance Of Self-Healing Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Anor, Nur Ilmadiena (2022) Experimental Study Of The Effect Of Granite Cutting Waste As Partial Replacement Of Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ariff, Ummi Fatisya Ain (2022) Characterization Of β-TCP Coated On Stainless Steel 316. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Atan, Mohd Nidzam Adha (2022) Structure-Properties Relationship Of Open Cell Ethylene Vinyl Acetate Foam For Sound Insulation Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Au Yong, Huey Leen (2022) Investigation Of Silver Oxide Nanoparticles In Polymannose Thin Film On Resistive Switching Characteristics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azizan, Muhammad Ikhram Hakim (2022) Characteristic Of Silica Sand From Kuantan, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azlan Shah, Siti Nuraqilah (2022) Aluminium Pollution In Sediment Of Perai River, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Afif Hafizhan (2022) Study On Reclycing Of Industrial Steel Waste In The Production Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azman, Nur Iylia Ayuni (2022) The Effect Of Surface Property Towards Bacterial Biofilm Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Azman, Syamil Akhyar (2022) Fabrication Of 3D Biodegradable PBAT/PLA Blends Electrospun Nanofiber For Cardiac Patch Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azmi, Nurul Atiqah (2022) Corrosion Of Nanocomposite Sn/Ag Coating On Copper Substrate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Bahaudin, Aishah Shamimi (2022) Investigation Of Boron Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheang, Mun Kit (2022) Mechanical Properties And Biodegradability Of Carboxylated Nitrile Butadiene Rubber Reinforced With Cellulose Nanocrystals. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chen, Tze Xiang (2022) Development Of Polymer Nanocomposite-Based Coating For Corrosion Protection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheng, Wen Cai (2022) Effects Of Hybridization Of Graphene Oxide And Halloysite Nanoclay On The Oil Absorption Of Polyurethane Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Cheong, Yi Huan (2022) Effect Of Fullerene (C60) Concentration In Pectin Polysaccharide Thin Film For Resistive Switching Characterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Christina Chin, Kai Qi (2022) Investigation Of Encapsulant Discoloration Mechanism In UV/Blue Light-Emitting Diode With Copper Hybrid Particles Filler Using Taguchi Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Derrick Chew, Hsien Nam (2022) Synthesis Of MnO2 For Surface Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Din, Muhamad Nur Iman Syafaat (2022) Bio-Based Oil As A New Rubber Processing Oil In Development Of Green & Sustainable Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Dinno, Nur Dianna (2022) Nutrient Removal Efficiencies In A Bioretention Cell Using Pre-Treated Coconut By-Product As Carbon Source. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Fadzil Akmar, Nur Humairah (2022) Impact Of Different Ultrasonic Frequencies On Precipitation Process Of Dicalcium Phosphate Dihydrate Coated Hydroxyapatite Granular Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Fishal, Nur Fitrah (2022) Numerical Investigation On The Polymer Flow In A Restriction Flow Path. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Gan, Soon Xin (2022) Preliminary Study Of Dicalcium Phosphate Dihydrate Coated 45S5 Bioglass Granule. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Guan, Min Li (2022) Post Annealing Treatment Of TiO2 Nanotubes For Defective Black Oxide Formation And Application In Heavy Metal Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Haris, Nuradrina (2022) Sequential Leaching Of Malaysian’s Ion Adsorption Clay Rare Earth Element. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hasbullah, Nurul Anis (2022) Surface Interactions Of Polymer Nanoparticles In Waxy Crude Oil Model System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hiew, Wai Kien (2022) Development Of Diffusion Barrier-Forming Coating For High-Temperature Application: Effect Of Coating Duration And Bath Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ho, Yue Cheng (2022) Development And Characterization Of Chitosan-Cellulose Nanofiber Hydrogel Scaffold For Tissue Engineering Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hor, Bing Yao (2022) Effect Of Agitation To Electroless Nickel Plating Of NiP/Ag Nanocomposite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Huan, Jia Yee (2022) Effect Of Fused Deposition Modeling (FDM) Parameters On The Warpage And Different Composition Polylactic Acid/Ethylene-Vinyl Acetate Blend. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Idris, Muhammad Yusran Azim (2022) Tensile Properties And Water Absorption Of Mineral Fillers Filled Polylactic Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Idrus, Nurul Athira (2022) Evaluation Of Mechanical And Interfacial Properties Of Kenaf Filler/Poly (Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Imbau, Arnold (2022) Preliminary Study Of Self-Setting 45S5 Bioglass Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ismail, Iman Firdaus (2022) Development Of Soft And Flexible Filament For 3D Printing Of Anatomical Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Johar, Muhammad Faris Zamir (2022) A Study On The Potential Of Tin Recovery From Iron Ore Tailing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kalai Selvam, Devah (2022) Hot Dip Galvanizing Of Zn-Al-WO3 Coating On Mild Steel: Effect Of Surface Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamarujaman, Nur Maisara (2022) Surface Modification Of 45S5 Bioactive Glass Microspheres For Drug Delivery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamso, Nurul Syazni (2022) Physical And Chemical Characterization Of Granitic Rock For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khairulnizan, Hazman Arif (2022) Mineral Characterization Of Cassiterite Ore From Selected Area In Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kiong, Yuen Yee (2022) Hydrothermal Synthesized Zinc Oxide Nanoparticles With Manganese Doping For Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kok, Kai Lin (2022) Synthesis And Characterization Of Magnesium Oxide Nanomaterials Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lai, Kher Wei (2022) Reactivation Of Ion Exchange Resins For Water Treatment Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, Eyann (2022) Numerical Study On The Effectiveness Of Homogeneous Multiphase Volume Of Fluid (VOF) Model In Rubber Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lee, See Kay (2022) Recycle And Synthesis Green Reduce Graphene Oxide From Spent Battery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lim, Chow Peei (2022) Utilization Of Plasticizers And Lubricants Derived From Palm Oil On Rheological And Mechanical Properties Of Styrene Butadiene Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liong, Kai Min (2022) Synthesis And Characterization Of Aluminium Based Nanomaterials Using Direct Heating Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Loo, Ji Yu (2022) Tin Nanoparticles Modified Electrode For Simultaneous Detection Of Cadmium (Cd) And Lead (Pb) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mahadi, Nurul Amirah (2022) Bioactivity Improvement Of 45S5 Bioglass Through Calcium Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mahyudin, Muhammad Luqman Hakim (2022) Development Of Smart Polybutylene Adipate Terephthalate (PBAT) Blending For Plant Pot Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Maijin, Richell (2022) Mineral Characterization Study of Gold Deposit in Tawau, Sabah Focusing on Mineralogy and Geochemistry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mat Radzi, Muhammad Adib Nuqman (2022) Effect Of Different Calcium Salt Coating On Mechanical And Bioactivity Properties Of Cordierite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Md Zan, Siti Rohaidah (2022) A Comparative Study On The Effect Of Chemical Additives On Clinker Grinding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Merdan, Fathin Atiqa (2022) Ammoniacal Cyanide Leaching Of Complex Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad, Ikmal Nor Haikal (2022) Assesstment Of Water Quality Around Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Jafri, Nurul Husna (2022) Effect Of Skim Latex On Mechanical Properties Of Tire Tread Compound. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Rashid, Nor Shafikah (2022) A Novel Waterborne Coating Based On Styrene-Acrylic Copolymers For Construction Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Yusoff, Nurulaini (2022) Transforming Dental Mould Waste (DMW) Into High Purity Calcium Source By Chromium Removal Through Alkaline Caustic Leaching (ACL) Using Ultrasonic Technology. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamed Jawhar, Mohammad Taufiq (2022) Hot Corrosion Behaviour Of Slurry Aluminide Coating In Molten Alkali Salts. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mohammad, Anis Najihah (2022) The Effect Of Tannic Acid Crosslinker On The Properties Of Kenaf Fibre And Polyvinyl Alcohol Binder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Akhir, Mohamad Adli (2022) Physical And Chemical Characterization Of Clay Deposits For Ree Utilization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariff, Mohamad Fitri Azim (2022) Preliminary Study On Fabrication And Characterization Of Compatibility HA/TPU Composite Filament For Bone Scaffold. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Muhammad Afiq Ariff (2022) Effects Of Geological Properties Of Limestone Formation In Blasting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Azman, ‘Aisyah Mardhiah (2022) Alkaline Treatment Of 3D Printed TI-AL-V Alloy For Bioactivity Surface Modification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Bukhori, Muhammad Aiman (2022) Physicochemical Characterization And Diagnostic Leaching Of Complex Copper-Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Din, Shamin Aida (2022) Application Of Feldspar Filler On Curing Characteristics And Physical Properties Of Elastomeric Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Jaffri, Ju Liyana (2022) Effect Of Water Absorption Towards Mechanical And Physical Properties Of Hybrid Flax/Glass Fiber Laminated Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Khairol Anuar, Nur Afifah Hayani (2022) Effect Different Ratio Of Soda Feldspar And Potash Feldspar On The Properties Of Porcelain Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Mohd Razali, Aisyah Awanis (2022) Hybrid Effect And Stacking Sequence On Mechanical And Morphological Properties Of Flax/Glass Fiber Reinforced Epoxy Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Sabri, Nur Shauqina (2022) Properties And Performance Of Natural Rubber Latex (NRL) Band: A Scavenging Medium To Capture Microplastic Waste In Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Za’i, Mohamad Zulhakimi Haiqal (2022) Fine Grinding Of Silica Via Stirred Milling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd. Saad, Nuraizul Azren (2022) Correlation Of Blast Design And Ground Vibration During Blasting At Imerys (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Azman, Nadiah Adlin (2022) A Comparative Study Of Different Collectors In The Flotation Of Rare Earth Mineral. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad Sabri, Muhammad Iman Rif’at (2022) The Effect Of Marine Fouling And Seawater Corrosion On Doped Titanium Nitride Electrode. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Nazatul Dzahir, Nurul Fatin Nazira (2022) Study Of Malaysian Rare Earth Elements: Mineral Characterization Of Monazite And Xenotime Concentrate From Amang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Guan Sheng (2022) Synthesis And Characterization Of Titanium Dioxide Particles By Direct Heating Technique For Photodegradation Of Methylene Blue Solution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Nor Afiqah Adriana, Roslan (2022) Application Of Unmanned Aerial Vehicle (UAV) Photogrammetry Method For Rock Mass Rating Analysis Of A Rock Slope. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Asim, Muhammad Danial Haziq (2022) Characterization & Separation Of Tungsten In Cassiterite (Tin Middling) From Bukit Kachi Mine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Norridzwan, Ahmad Syamil (2022) Fabrication Of Porous Calcium Sulphate By Using Yeast As Pore Foamer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nurul Izzah, Abd Bashid (2022) Characterization Study Of Malaysian ION-Adsorption Clay NR-REE (Non-Radioactive Rare Earth Element). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Oung, Hor Yen (2022) Study On Water-Soluble Polymers For Biomedical Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Poul Dawas, Emiellia (2022) The Effects Of Printing Parameters On The Tensile Properties Of 3D Printed Thermoplastic Polyurethane (TPU) Via Fused Deposition Modeling (FDM) Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Priscilla, Tong Shuen_ (2022) Synthesis And Characterization Of Rankinite From Rice Husk Ash And Eggshells. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rafindi, Nurrafiq Arina (2022) Removal Of Cadmium And Chromium Using Titanium Dioxide Nanowires Under Ultraviolet Radiation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rahmat, Nuruljannah (2022) Effect On Compatibility And Graphene On Shape Memory And Tensile Properties Of Polylactic Acid (PLA)/ Ethylene Vinyl Acetate (EVA) Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Nur Ain (2022) Recovery Of Copper From E-Waste Via Hydrometallurgy Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Salleh, Shaharatul A’ini (2022) Investigation Of Oxidation Process On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Samsul Baharin, Massara (2022) Properties & Characterisation Of The Halochromic CMC-PEG Hydrogel Film. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Saudi, Nabilah (2022) Hydrophobic Polytetrafluoroethylene (PTFE) Coating On Endoscopic Lenses Via RF Magnetron Sputtering Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral. (Submitted)

Seah, Ying Zhi (2022) Characterization Of Honey As Active Thin Film For Resistive Switching Memory Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Shamsuddin, Hanis (2022) The Effect Of Voltage And Time On Oxide Nanotubes Of Titanium Alloy By Anodizing For Metal Implant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sharil Azuar, Wan Nur Syahidah (2022) The Study Of Cement Properties With Ceramic Waste Fillers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sim, Yeap Feong (2022) Development Of Photo-Curable PMMA-Based Liquid Resin: Dispersibility Study Of Go And Ago In PMMA-Based Liquid Resin And Mechanical Analysis Of Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Soon, Li Jie (2022) Preparation And Characterization Of Hydrophobic Polyurethane Coating For Steel Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Syed Hussin, Azrina (2022) Study Of Clinker Grindability From YTL Cement, Kanthan, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Boey Wei (2022) Study On Mechanical, Biodegradability And Compostability Of Agriculture Waste Loaded Biodegradable Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Gang Yang (2022) Removal Of Pollutants Using Nanostructured Tungsten Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Hong Liang (2022) Electrodeposition Of Copper On Stainless Steel For Solid Oxide Fuel Cell Interconnect Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Siew Min (2022) Microstructure And Kinetic Growth Of Aluminide Coating On 304 Stainless Steel By Slurry Aluminizing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tan, Zhuang Min (2022) Synthesis Of Metal Oxide Coupled TiO2 Photocatalyst Particles For Enhanced Photodegradation Of Rhodamine B Dye. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tang, Yi Tian (2022) Investigation Of Phosphorus Spin On Dopant On SOI Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tang, Zi Jie (2022) Effect Of Halloysite Nanotubes On The Performance Of Self-Healing Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tengeo, Chee Ying (2022) Gold And Bismuth Nanoparticles Modified Electrodes For Simultaneous Detection Of Pb(II) Ions, Cd(II) Ions And Cu(II) Ions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Thian, Yoke Teng (2022) Water Absorption And Hygrothermal Aging Behavior Of Kenaf Fiber-Reinforced Poly(Lactic Acid) Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Tneh, Kin Man (2022) The Effect Of Adding Silver Nanoparticles In Tin Surface Finish Electroplated With Ultrasonication On Wettability And Strength Of SAC305 Solder Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Toh, Jia Min (2022) Preparation And Characterization Of Self-Healing Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wing Foong, Chin (2022) Effects Of Graphene Oxide Coating On The Properties Of Polyurethane/Nanofiller Nanocomposite Foams. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wu, Chuen Li (2022) Acid Based Accounting (ABA) For Acid Mine Drainage Prediction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yong, Hui Sin (2022) Surface Oxidation Of CU Extracted From Electronic Waste For CUO Nanowires Formation And Their Use To Reduce CR(VI). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yong, Rui Huang (2022) Multi-Stages Synthesis Of Calcium Hydroxide Particles From Malaysian Limestone By Sol-Gel Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yu, Kai Chun (2022) Tensile And Impact Properties Of Mineral Fillers Filled Poly(Lactide) Acid Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahisham, Zahira Sofiya (2022) Geochemistry And Petrography Characterization Of Ordovician Devonian Limestone Formation In Kinta District, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zaiful Bahari, Siti Khairina (2022) Study Of Water Quality In Sungai Kereh: Analysis On The Effluent Discharged From Kampung Selamat Based On The Requirement Standard. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zam Hariro, Aini Yusriena (2022) Effect Of Controllable Parameters On Rock Fragmentation At Imerys Mineral (M) Sdn Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zamri, Nur Hazwani (2022) Application Of Hallimond Tube For The Flotability Study Of Pure Scheelite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zawawi, Nur’ain Syakirah (2022) Fabrication And Characterization Of Electrospinning Biodegradable Fabric Layer For Face Mask Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkarnain, ‘Aainaa Shahirah (2022) Application Of Hallimond Tube For Flotability Study Of Magnetite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Farzana (2022) Effect Of Ball Clay Addition In Slip Casting In Making Of Gloves Former. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zurainee, Nurul Izzaty (2022) Polyurethane Binder For Mxene Electrode Fabrication Of Hybrid Supercapacitor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)