Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Monograph" and Year is 2022

Abd Ghani, Muhammad Muzakkir (2022) Micro Pitting And Wear Assessment Of Spur Gear. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Aziz, Siti Nuha Majiddah (2022) Design And Fabrication Of Flexible Strain Sensor For Food Packaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With Ti02 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Muein, Noor Shafiatul Akmal (2022) Thermal Activities In Natural-Oil And Synthetic Lubricants With TiO2 Additives. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Mutalib, Nurul Rafika Amira (2022) Analysis Of Grease Degradation Under Elastohydrodynamic Lubricant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Razak, Mohamad Noorhazim (2022) Study On Different Parameters Of An Inertia-Type Piezoelectric Actuator In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Adnan, Nur Sajha (2022) Impact Of Cross-Linking Polymer To Bridge The Porous Membrane And Selective Layer In Membrane Absorption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Adrian Lim, Zan Kuang (2022) Characterization Of Natural Resin And Synthetic Resin In Fiber Composite Laminate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad, Mohd Zuhair (2022) Analysis Of Martensitic Transformation And Bending Deformation Of NiTi Arch Wire Against Different Deflection And Temperature Range. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad, Musa (2022) Deformation Behaviour Of Metallic Cellular Structure Using Finite Element Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Khaizi, Aini Syazwina (2022) A Pilot Study Of Heat Stress Risk Evaluation While Wearing Personal Protective Equipment Suit In A Tropical Climate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nadzri, Faiz Farhan (2022) Optimization Of Laser Soldering Parameters On Passive Devices. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Nordin, Ahmad Faris (2022) Lean Premixed Pre-Vaporized Combustion In A Swirl Stabilized Liquid Fuel Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Alauden, Muhammad Rafiq (2022) Characteristics Study Of Emulsified Biofuel And Egg Yolk Oil (EBEYO) Properties And Its Performance In Compression-Ignition Engine Using New Formulated Surfactants And Composition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ang, Cheau Hui (2022) Deformation And Stress Analysis Of 3D Printed Spanner Wrench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Anuar, Muhamad Shafiq (2022) Design And Development Of Internet Of Things (IoT) Based System For Monitoring Energy Consumption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Awang Mansor, Muhammad Adib Haikal (2022) Analysis Of Design Of An Intervention Oil Palm Sickle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhan, Anis Masturina (2022) Reduce Manufacturing Lead Time Through PDCA And Waste Elimination In Metal Casting Company: A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhar, Mohamad Amiruddin (2022) 1D Multigrid Solver For Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azhar, Muhammad Asyraf (2022) Miniature Specimen Fracture Toughness Testing: A Concise Review. Technical Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azmin, Abdul Rahman (2022) Experimental Study Of Water Based Air Conditioning System For Space Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Badrul Hisham, Alya Nabilah (2022) Numerical Investigations On Sprue Configuration For Multi-Cavity Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Bahshon, Mohamad Hafizi (2022) Design, Fabrication, And Testing Of Simple Tool For Lodged Paddy Rice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Basirah, Aiman (2022) Analysis Of Micro Generator Performance From Porous Media Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chai, Chang Yuan (2022) Analysis Of Heat Treatment Effect On Tensile Properties Of 3D Printed Carbon Fiber Composite And Comparing Mechanical Properties On Manufacturing Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chan, Jian Siang (2022) Performance Of Combustion Chamber For Micro Gas Turbine (MGT) Application Running On Palm Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chin, Jiun How (2022) Performance Comparison Of AFC-CA, AFC-GA, AFC-PSO And AFC-NN In Reducing The Vibration Of Suspended Handle Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chow, Hong Man (2022) Effect Of Different Biodiesel Blends On Engine Performance, Emissions And Combustion Characteristics Under Various Engine Torques And Speeds Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chuah, Siong Wei (2022) Experimental Study Of Desiccant Material Pressure Drop. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ezra Tan, Yi Chyn (2022) Philosophical Tools Of Lean Six Sigma In Service Sector: Implications For Organisational Learning. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ganesan, Devesh Raj (2022) A Predictive Classification Model For Running Injury. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ganiashan, Eesvaran (2022) Structural Integrity Investigation Of SAC305 Lead Free Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Gun, Yong Yin (2022) Optimization Of 3D Printing Of Shape Memory Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Habidin, Mohamad Ridzuan (2022) 3D Scanner App For New Product Development Due To Covid-19 Endemic. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamid, Mohamad Idham (2022) Experimental Study Of Building Materials Made Of Waste Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamidi, Muhammad Nafiz (2022) Micropitting And Wear Assessment Of Roller Bearing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hashim, Nur Amanina Ayuni (2022) Witness Simulation Of Machine Breakdowns For Small, Medium And Large Aircrafts During Turnaround Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hooi, Khey Herng (2022) Effects Of Fin Length And Fin Valley On The Performance Of Bus Duct Conductor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hussin, Muhamad Amirul Aiman (2022) Comparative Assessment Of Air-Cooled And Water-Cooled Thermoelectric Power System “Simulation Approach”. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ilias, Izzah Nadhilah (2022) Automatic Additive Manufacturing Product Generation Through Computer Aided Process Planning Using 3D/4D/5D Printing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismadi, Nurul Syamimi Zahirah (2022) Aerodynamic Design Of A Roof Fairing For Trucks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Nur Azwahana (2022) Simulation Of Check-In Passenger Flow For International Departure Due To Covid19 Situations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Jason, Edwin (2022) Non-Linear Contact Finite Element Analysis Of Split Hopkisnon Tensile Bar. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kamar Shah, Noor Fajwa (2022) Study And Analysis Of Piezo Bender For Energy Harvesting Application Using Matlab Simulink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Khoo, Boon Sheng (2022) Development Of A Virtual Vehicle Identification For Tracking Hit-And-Run Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Kai Chen (2022) Product Design And Development Using Virtual Reality And CAD/CAM System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Zhao Yang (2022) Development Of Machine Learning User Interface For Pump Diagnostics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Liew, Jin Fung (2022) Simulation Of Passenger Flow For International Departure Using Witness Horizon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Jou Wyn (2022) Experimental Study On Powder Coated Surface With Polydur Zinc Based Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Kwan Hue (2022) Fiber Misalignment Effect On Compressive Properties Of Jute And Kevlar Composite Under Impact And Static Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Si Ying (2022) Developing A Discrete-Event Simulation Model For Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Wen Kai (2022) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Md Sukri, Muhammad Ahnaf Ataulah (2022) Design And Testing Of Patient-Specific Ankle Foot Orthosis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Nizar, Luqman Haikal (2022) Innovative Tool For Composite Machining In Aerospace Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Shaberi, Mohamad Nazhan (2022) Biomechanical Evaluation Of Spinal Loadings During Oil-Palm Plantation Tasks. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamed Ghouse, Muhammad Suffi Fazari (2022) Simulation Of Cantilevered Piezoelectric Energy Harvesters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Faizal, Muhammad Faris (2022) Simulation Of Multistage Cascaded Thermoelectric Generators With Adaptive Finite Element Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Hafni, Aidil Azwadi (2022) Mechanical-Physical Properties Characterization Of Alternative Materials For The Application In Highway Guardrail. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Harizi, Muhammad Hafizam Afiq (2022) Data Mining Analysis Of Chronic Kidney Disease (CKD) Level. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Noor Ariffin, Siti Syairah (2022) Tribological Study Of Additive Manufactured Aluminium Alloy ER5356 For Potential Part Repair. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Nor Halimuddin, Normalyana (2022) Three-Dimensional Elastic-Plastic Crack Tip Stress Fields. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Shafee, Muhammad Amirul Farhan (2022) Predictive Analysis Of Ice, Hybrid And Electric Vehicle: Selected Case Studies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Zaini, Mohamad Zulhisyam (2022) Potential Failure Mode In Pergau Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mokhtar, Mohamad Dzul Asyraf (2022) Development Of Omnidirectional Drive System Using Mecanum Wheels For Patient Transfer Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Moustafa Hebish, Anas Ahmed Moustafa Moustafa (2022) Optimization Of Mild Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhamad Fikri, Jaafar (2022) Shell Eco-Marathon Fuel Consumption Engine Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Munisuaran, Kishen (2022) Performance Comparison Of Steam And Air-Steam Gasification Reactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Munusamy, Sharven (2022) Development Of A Portable Low Strain Rate Testing Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Murugaya, Thivines (2022) Design And Development Of Robot End-Effector For The Use In Lower-Limb Stroke Rehabilitation Exercises. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mynn Wei, Teoh (2022) Detection And Counting Of E. Coli On Specialized Test Piece Using Yolo v4. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nabli, Muaz (2022) Predictive Analysis Of Demand Of Electric Vehicles In Malaysia And Its Potential. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ngo, Shi Hui (2022) Development Of A Control Model For A Head On Collision Avoidance System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nordin, Muhammad Nor Akmal (2022) Effects Of Oil Palm Plantation Tasks On Skeletal Muscle Activities. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Omar, Mohammad Shafiq (2022) Meso-Scale Modelling Of Pultruded Hybrid Composite Under Impact Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Guan Kai (2022) Effects Of Air Inlet Angle On The Combustion And Emission Characteristics Of A Cylindrical Chamber Fueled With Waste Cooking Oil Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Zi Hui (2022) Heat Dissipation Enhancement Using Staggered Fin Heat Sink. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Osman, Muhamad Nazmi (2022) Conceptual Analysis Of Lean Principles And Tools In Manufacturing Industries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Pozai, Nurul Natasha Aiza (2022) Experimental Modelling And Control Of Linear Actuator For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ragupathy, Rohendran (2022) Experimental Study Of Heat Transfer Rate On Acoustic Liner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Raja Gobal, Hehgeraj (2022) Study Of Deformation And Crack Propagation On Component During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajenthiren, Sharaneish (2022) Numerical Analysis Of Polymer Melts Flow Behaviour In Grooved Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajogoval, Illayakantthan (2022) Mining The Basic Reproduction Number (R0) Forecast For The Covid Outbreak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ramlan, Nur Diyana (2022) Comparison Of Bio-Oil And Synthetic Lubricants Tribological Characters. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razak, Abang Muhammad Farith (2022) Optimization Of Flameless Cyclone Combustion Chamber For The Combustion Of Biomass Producer Gas. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rohizam, Rajeeha (2022) Cycle Time Improvement Of Combined Punching And Drilling Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Roslee, Muhammad Sharifuddin (2022) Investigating The Performance Of Metaheuristics To Optimize The Revenue Of Semiconductor Supply Chain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Muhammad Farid Amirul (2022) Experimental Study On The Impact Of DBD Plasma Actuator Geometry And Electrical Input On Thrust Generation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Salleh, Muhammad Safwan (2022) Simulation Of Flexible Capacitive Strain Sensor For Food Packaging Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Salleh, Nabihah Mat (2022) Effect Of Temperature Towards Membrane Fouling By Microalgae Algal Organic Matter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Kimia. (Submitted)

Salleh, Siti Norfatihah (2022) Safety Culture Awareness Of Laboratory Activities Among Universiti Sains Malaysia (USM) Engineering Students. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sekar, Sageein (2022) Development Of Affordable Full Body Isolation Pod. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shamsul Khair, Nurul Syifa’ (2022) Effect Of Ageing Treatment On Force-Deflection Behaviour Of NiTi Wire In Three-Point And Three-Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shea Wen, Lee (2022) Powered Stretcher For Patient Transfer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Singh, Suraj (2022) Combustion Characteristics Study Of Low Grade Producer Gas From Carbonized Empty Fruit Bunch (EFB) Briquettes Gasification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Sher Wen (2022) Final Design Improvement Of Replica Trophy From Prototype To Mass Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Yong Quan (2022) Finite Element Analysis Of Pull-Out Performance Of Bone Screw. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tay, Ying Keat (2022) Evaluation Of Turbidity Measuring Using IoT Based Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tharumaalingam, Vimalraj (2022) Fuel Consumption And Fuel Economy Of Hydraulic Hybrid Vehicle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wei Tong, Koh (2022) Air-Drill With Accelerometer And Microphone For Composite Drilling Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Pei Wen (2022) Mechanical Properties Of Porous NiTi Shape Memory Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Zie Jen (2022) Vibration-Fatigue Assessment On Electronics Interconnections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yassine Mahamat, Ibrahim Mahamat (2022) Effect Of Transition Taper Length On Air-Filled Substrate Integrated Waveguide Losses. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yee, Qian Hui (2022) Design And Development Of A Flight Operator Safety Audit System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusman, Muhammad Syafiq Farhan (2022) Fatigue Life Prediction For Small Component Welds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusri, Akmal (2022) Stress-Strain Behaviour Of Conductive Polymer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zainal Abidin, Nur Sarah (2022) Evaluation Of Sound Absorption Of Micro Perforated Panel Made By Palm Oil Fiber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Muhammad Naim (2022) Characterization Of Strain Hardening Three Dimensional Crack-Tip Stress Field. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zakaria, Muhammad Syafiq (2022) Design Of A Miniature Axial Blower For A Portable Thermal Comfort System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zalkapli, Muhammad Amir (2022) Nanoindentation Of Copper Thin Film On Silicon Substrates. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zubir, Muhammad Syukri (2022) Effect Of Epoxy Materials And Gold Wire Number On Led Encapsulation Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zubir, Zulfahmi (2022) Bioelectricity Generation Of Glycerine Waste In Microbial Fuel Cell. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifili, Al Azim Faiz (2022) Design Of Kenaf Fiber Polymer Composite For Interior Car Door Panel Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Ahmad Fazlullah (2022) Finite Element Analysis Of Bending Delamination In Multilayer Circuit Boards PCBs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)