Idris, Nor Najhan
(2022)
Characterization, Kinetics And Equilibrium Studies Of Paracetamol Adsorption On The Oil Palm Fronds (Opf) Cellulose Nanocrystals.
Masters thesis, Perpustakaan Hamzah Sendut.
Abstract
Pollution of water via pharmaceutical drugs such as paracetamol have been a highly concerning issue; and effective measures must be taken to treat these aquatic contaminants. Hence, the present study explored use of cellulose nanocrystals (CNC) isolated from oil palm fronds (OPF) through pre-treatments and acid hydrolysis as an environmental friendly adsorbent. The complementary analyses showed that the OPF CNC possesses a crystallinity index of 43.60 %, surface area (10.51 m2 g-1), and an aspect ratio of 19.98. Besides, the OPF CNC and OPF CNC-AC hydrogel beads have been successfully produced, optimised, and applied for paracetamol removal. The modification of OPF CNC-AC hydrogel beads with the commercial activated carbon (AC) has improved the BET surface area up to 85.19 m2 g-1. The adsorption studies of paracetamol onto OPF CNC and OPF CNC-AC hydrogel beads can be achieved at 60 g and 0.6 g of adsorbent dosage, respectively, at a pH 3 with a contact time of 170 min under room temperature. It was observed that the produced data fitted best with the pseudo-second order kinetic model and Freundlich isotherm model for characterising the adsorption of paracetamol onto OPF CNC hydrogel beads with a maximum adsorption capacity, qmax of 0.03 mg g-1. Meanwhile, for OPF CNC-AC hydrogel beads, the pseudo-second order kinetic model and Langmuir isotherm model showed the best correlation for the adsorption of paracetamol with a qmax value of 21.31 mg g-1. Therefore, the output from this study may suggest that OPF CNC and OPF CNC-
xxiv
AC hydrogel beads can be used as natural adsorbents for the removal of paracetamol waste.
Actions (login required)
 |
View Item |
