Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2015

Thesis

Zakaria, Muhammad Razlan (2015) Enhancement of Mechanical, Thermal and Dielectric Properties of Hybrid Carbon Nanotubes and Alumina in Epoxy Nanocomposites. Masters thesis, Universiti Sains Malaysia.

Abdul Rani, Nadia Hanim (2015) Finite Element Analysis on Energy Absorbing Capability Of W-Beam Corrugated Guardrail. Masters thesis, Universiti Sains Malaysia.

Alias, Nurhaswani (2015) Synthesis And Electrochemical Behavior Of Lifepo4/C With Air-Electrode For Aqueous Lithium Ion Battery. Masters thesis, Universiti Sains Malaysia.

Budiman, Faisal (2015) The Formation Of Iron Oxide Nanowires And Nanosheets By Thermal Oxidation Of Iron For Cr(Vi) Removal By Adsorption. Masters thesis, Universiti Sains Malaysia.

Dandan Satia, Mohd Saidina (2015) Preparation and Characterization of Calcium Copper Titanate Filled Epoxy Composites for Embedded Capacitor Applications. Masters thesis, Universiti Sains Malaysia.

Dandan Satia, Mohd saidina (2015) Preparation And Characterization Of Calcium Copper Titanate Filled Epoxy Composites For Embedded Capacitor Applications. Masters thesis, Universiti Sains Malaysia.

Daud, Farah Diana Mohd (2015) Synthesis And Characterization Of Calcium Oxide And Magnesium Oxide Supported Calcium Oxide For Carbon Dioxide Adsorbent. PhD thesis, Universiti Sains Malaysia.

Ibrahim, Siti Aida (2015) Development Of Titanium Dioxide NanoparticlesNanosolution For Photocatalytic Activity. PhD thesis, Universiti Sains Malaysia.

Kamarudin, Maslina (2015) Effect Of Al Addition To Imc Formation, Mechanical And Wetting Properties Of Low-Ag Sac Solder Alloy. Masters thesis, Universiti Sains Malaysia.

Lee , Ting (2015) Methane Adsorption Microcalorimetry By Activated Carbon Fibre Derived from Empty Fruit Bunch Fibre. PhD thesis, Universiti Sains Malaysia.

Md Sani, Nur Ariffah (2015) Development Of Ternary Ni-Ag-P And Ni-Cu-P Using Electroless Coating On Copper Substrate. Masters thesis, Universiti Sains Malaysia.

Mohd Saidina, Dandan Satia (2015) Preparation and characterization of calcium copper titanate filled epoxy composites for embedded capacitor applications. Masters thesis, Universiti Sains Malaysia.

Mohd Yusoff, Mohd Azlan (2015) Scour Below Submerged Skewed Pipeline. PhD thesis, Universiti Sains Malaysia.

Mutalib, Nor Azaniza Abdul (2015) Innovative Approach For Production Of Epoxy Syntactic Foams Consisting Of Epoxy Hollow. Masters thesis, Universiti Sains Malaysia.

Omar Alsharif, Saad (2015) Fabrication And Evaluation Of Dental Resin Composites Developed From Bis-Gma/tegdma With Treated Ceramic Fillers. PhD thesis, Universiti Sains Malaysia.

Ooi , Zhong Xian (2015) Potential Utilization Of Modified Oil Palm Ash As Filler In Natural Rubber Vulcanizates. PhD thesis, Universiti Sains Malaysia.

Phan, Chee Hong (2015) Fabrication And Properties Of Electromagnetic Interferences Shielding Epoxy Composites For Electronic Packaging Application. Masters thesis, Universiti Sains Malaysia.

Poh, Chen Ling (2015) Characterization Of Filled Epoxy Thin Film Composites For Dielectric Application. Masters thesis, Universiti Sains Malaysia.

Poh , Chen Ling (2015) Characterization of Filled Epoxy Thin Film Composites for Dielectric Application. Masters thesis, Universiti Sains Malaysia.

Rahim, Afikah (2015) The Effect Of The Rockmass Properties And Groundwater Inflow Related To Performance Of Tunnel Boring Machine (Tbm) At Pahang Selangor Raw Water Transfer Tunnel Project (Psrwt. Masters thesis, Universiti Sains Malaysia.

Rodzi, Siti Nur Hazwani Mohamad (2015) Properties Of Biocompatible Mg-Zn Hydroxyapatite Composites Fabricated By Different Powder Mixing Techniques. Masters thesis, Universiti Sains Malaysia.

Saharudin, Khairul Arifah (2015) Development Of Nonmetal-Doped Tio2 Nanotube Photocatalyst For Decolorization Of Methyl Orange. PhD thesis, Universiti Sains Malaysia.

Sarifuddin, Norshahida (2015) Mechanical, Physical, Thermal And Biodegradability Studies Of Low Density Polyethylenethermoplastic Sago Starch Kenaf Core Flour Biocomposites. PhD thesis, Universiti Sains Malaysia.

Shamsudin, Nor Fadilah (2015) Parametric Studies Of Vbo-Oven Cure Process On The Bonding Quality Of Sandwich Panel. Masters thesis, Universiti Sains Malaysia.

Shuhaimi, Nor Hasmaniza Husna (2015) Utilasation Of A Natural Antioxidant From Elaeis Guineensis (Oil Palm) Leaves In Rubber Compounds. Masters thesis, Universiti Sains Malaysia.

Sidek, Mufidah Md (2015) Study On Laminated Natural Rubber (Nr) Latex Based Films For Mould Cleaning Application. Masters thesis, Universiti Sains Malaysia.

Tan , Kim Seah (2015) Investigations On Silver-Copper Nanopaste As Die-Attach Material For High Temperature Applications. PhD thesis, Universiti Sains Malaysia.

Tan , Kim Seah (2015) Investigations On Silver-Copper Nanopaste As Die-Attach Material For High Temperature Applications. PhD thesis, Universiti Sains Malaysia.

Tham, Wei Ling (2015) Preparation And Properties Of Poly (Lactic Acid) Halloysite Nanotube Nanocomposites. PhD thesis, Universiti Sains Malaysia.

Tham , Cho Yin (2015) Preparation Of Poly(Lactic Acid) (Pla) Microspheres For Drug Delivery System. Masters thesis, Universiti Sains Malaysia.

Tham Cho Yin, Cho Yin (2015) Preparation of Poly (LACTIC ACID) (PLA) Microspheres for Drug Delivery System. Masters thesis, Universiti Sains Malaysia.

Zakaria, Muhammad Razlan (2015) Enhancement of Mechanical, Thermal and Dielectric Properties of Hybrid Carbon Nanotubes and Alumina in Epoxy Nanocomposites. Masters thesis, Universiti Sains Malaysia.