Number of items: 37.
Anwar, Dede Miftahul
(2014)
Dispersion of Iron Oxide Nanoparticles on Oxide Nanotube for Nanocatalyst System.
Masters thesis, Universiti Sains Malaysia.
Hawari, Akmal Afham
(2014)
Preparation And Properties Of Rubber Seed Kernel
Powder/Recycled Polystyrene Composites.
Masters thesis, Universiti Sains Malaysia.
Rathnayake, W. G. Indrajith Udayakantha
(2014)
Synthesis And Characterization Of Silver Nanoparticles For Antimicrobial Application In Natural Rubber Latex Foam By.
PhD thesis, Universiti Sains Malaysia.
A
Abd Aziz_, Siti Nor Qurratu Aini
(2014)
Synthesis and characterization of Fe-Doped Zinc Oxide Rods.
Masters thesis, Universiti Sains Malaysia.
Abdullah, Tuti Katrina
(2014)
Study Of The Redox And Acid-Base Properties Of Soda-Lime Silicate Glass: Application To The High Temperature Corrosion Of Nickel-Based Alloys And Ceramic Materials.
PhD thesis, Universiti Sains Malaysia.
Ahmad Barudin, Nur Hidayati
(2014)
Antibacterial And Cell Interaction Of Ti02-Based Nanoparticles And Nanotubes.
Masters thesis, Universiti Sains Malaysia.
Ahmed, Hafed Ibrahim Ihmida
(2014)
A Study On Tungsten-Copper Composites Produced Via Combination Of Liquid Phase Sintering And Liquid Infiltration Techniques.
PhD thesis, Universiti Sains Malaysia.
Ali, Wan Fahmin Faiz Wan
(2014)
Response Surface Method Optimizing The Formation Of Yttrium Iron Garnet (YIG) Via Response Surface Method (Rsm) For Dielectric Resonator Antenna (DRA) Application.
PhD thesis, Universiti Sains Malaysia.
B
Banu , Poobalan
(2014)
Development Of SiO2 On 4H-SiC By Direct Thermal Oxidation And Post Oxidation Annealing In HNO3 & H2O Vapour.
PhD thesis, Universiti Sains Malaysia.
C
Chan, Boon Peng
(2014)
Mechanical And Tribological Properties Of Ultra High Molecular Weight Polyethylene With Zinc Oxide Antibacterial Agent For Joint Implant.
PhD thesis, Universiti Sains Malaysia.
Chang, Boon Peng
(2014)
Mechanical And Tribological Properties Of
Ultra High Molecular Weight Polyethylene
With Zinc Oxide Antibacterial Agent For Joint
Implant.
PhD thesis, Universiti Sains Malaysia.
E
Eang, Khy Eam
(2014)
Evaluation And Processing Of Gold At Pulai Mining, Gua Musang, Kelantan.
Masters thesis, Perpustakaan Hamzah Sendut.
Eawwiboonthanakit, Netnapa
(2014)
Fabrication And Characterization Of Poly (L-Lactic Acid) (Plla) Blends And Pllaikenaf Fiber Composites.
Masters thesis, Perpustakaan Hamzah Sendut.
H
Hawarl, Akmal Afham
(2014)
Preparation And Properties Of Rubber Seed Kernel Powder/Recycled Polystyrene Composites.
Masters thesis, Perpustakaan Hamzah Sendut.
Hazan , Roshasnorlyza
(2014)
Surface Engineering Of Titanium Based Metal For Cell Interaction.
PhD thesis, Universiti Sains Malaysia.
I
Ishak, Sarah
(2014)
Preparation And Properties Of Mica Filled Virgin And Recycled Ethylene Propylene Diene Monomer (Epdm) Composites.
Masters thesis, Perpustakaan Hamzah Sendut.
Ismail, Suhaina
(2014)
Reductive Leaching Of Low Grade Manganese Ore Using Bamboo Saw Dust.
PhD thesis, Universiti Sains Malaysia.
K
Keokangdong, Sengphet
(2014)
Development Of Porous Ceramic Clay Bodies Using Four Different Types Of Bioresource Wastes.
PhD thesis, Universiti Sains Malaysia.
Keokangdong, Sengphet
(2014)
Development Of Porous Ceramic Clay Bodies Using Four Different Types Of Bioresource Wastes.
PhD thesis, Universiti Sains Malaysia.
Khoo, Rong Ze
(2014)
Mechanical, thermal and morphological properties of poly(lactic acid)/ sugarcane bagasse fiber composites.
Masters thesis, Universiti Sains Malaysia.
M
Mangkonsu, Chuthathip
(2014)
Comparative Study On The Sintering Of Calcium Phosphate Ceramic By Conventional And Microwave Sintering.
Masters thesis, Perpustakaan Hamzah Sendut.
Mat Suki, Fairus Mazlia
(2014)
Preparation And Properties Of Polyvinyl Alcohol/Soya Bean Flour Biodegradable Film.
Masters thesis, Universiti Sains Malaysia.
Mohamad Noor, Asmahaiza
(2014)
Effect of beating, polyvinyl alcohol and kaolin on properties of paper from oil palm empty fruit bunch.
Masters thesis, Universiti Sains Malaysia.
Mohamed Ansari, Suriyati
(2014)
Formation Of Zirconia Sheets with Nanotubular Structure Prepared by Anodization of Zirconium.
Masters thesis, Universiti Sains Malaysia.
N
Nguyen, Van Thuong
(2014)
Characterization And Flammability Of Ethylene Vinyl Acetate
(Eva)/Zeolite Composites.
Masters thesis, Universiti Sains Malaysia.
O
Ooi , Chee Heong
(2014)
Urea Adsorption By Activated Carbon Derived From Oil Palm Kernel Shell And Empty Fruit Bunch Fiber.
Masters thesis, Universiti Sains Malaysia.
Osman, Muhammad Razak
(2014)
The Effect Of Natural Weathering Exposure And Hygrothermal Aging On The Properties Of Pultruded Hybrid Glass/Kenaf Fibre Reinforced Unsaturated Polyester Composites.
Masters thesis, Universiti Sains Malaysia.
Othman, Nurul Syazwani
(2014)
Effect Of Different Binder On The Fabrication Of Porous Cordierite.
Masters thesis, Universiti Sains Malaysia.
Q
QUAH, AI LI
(2014)
Formation And Characterization Of Pbxcd1-Xs Interlayer For PbSCdSZnS Quantum Dot Sensitized Solar Cells.
Masters thesis, Universiti Sains Malaysia.
R
Ramasamy, Shamala
(2014)
Effect Of Rice Husk Powder On Properties Of Natural Rubber Latex Foam.
Masters thesis, Universiti Sains Malaysia.
Roshasnorlyza , Hazan
(2014)
Surface Engineering Of Titanium Based Metal For
Cell Interaction.
PhD thesis, Universiti Sains Malaysia.
S
Saad, Anis Safinas Md
(2014)
Properties Of Kenaf Bast Powder Filled High Density Polyethylene/Ethylene Propylene Diene Rubber Composites.
Masters thesis, Universiti Sains Malaysia.
Shafiq, Mohamad Danial
(2014)
Preparation And Properties Of Rubber Seed Shell Flour (Rssf)- Filled Polypropylene (Pp) Composites.
Masters thesis, Universiti Sains Malaysia.
Shafiq, Mohamad Danial
(2014)
Preparation And Properties Of Rubber Seed Shell Flour
(RSSF)- Filled Polypropylene (PP) Composites.
Masters thesis, Universiti Sains Malaysia.
Syedsalim, Sharifah Aishah
(2014)
Nio Modification Using Zr4+ And Ca2+ For Dielectric Improvement.
Masters thesis, Perpustakaan Hamzah Sendut.
T
Thuong, Nguyen Van
(2014)
Effect Of Secondary Plastic Deformation On The Microstructures And Mechanical Properties Of Cast Ai-7Si-Mg Alloy.
Masters thesis, Perpustakaan Hamzah Sendut.
Z
Zaki, Syazwani Mohd
(2014)
The Effect Of Cu Based Tio₂ Nanotubes Array For Heavy Metal Removal.
Masters thesis, Universiti Sains Malaysia.
This list was generated on Fri Dec 27 03:40:46 2024 +08.
