Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Thesis" and Year is 2012

Abdullah, Ahmad Makarimi (2012) Optimization Of Potassium Hydroxide (Koh) Etching On The Fabrication Of P-Type Silicon Nanowire Transistor Patterned By Atomic Force Microscopy Lithography. Masters thesis, Universiti Sains Malaysia.

Ahmad, Nurul Nasuha (2012) Effect Of Lanthanum Dopant On The Properties Of Cacu3ti4o12 Thin Films Synthesized By Sol-Gel Method. Masters thesis, Universiti Sains Malaysia.

Hassin, Mohd Salihin (2012) Fabrication Of Tic-Reinforced Iron Based Composite Through Mechanical Activation And Carbothermal Reduction Of Hematite And Anatase. Masters thesis, Universiti Sains Malaysia.

Ibrahim, Ismail (2012) The Interaction Of Feldspar, Mica And Quartz With Different Collectors During Froth Flotation. PhD thesis, Universiti Sains Malaysia.

Kheong , Patrick Lim Wye (2012) Characterization Of Halogen-Free Core Material With Various Retardants. UNSPECIFIED thesis, UNSPECIFIED.

Mazlan, Norkhairunnisa (2012) The Effect Of Oxidation Treatment Of Mwcnt On The Properties Of Pdms Nanocomposite. PhD thesis, Universiti Sains Malaysia.

Wye Kheong, Patrick Lim (2012) Characterization Of Halogen-Free Core Material With Various Flame Retardants. Masters thesis, Universiti Sains Malaysia.

.

., Sunarso (2012) Fabrication Of Porous Carbonated Hydroxyapatite By A Sponge Template And Carbonation Technique. Masters thesis, Universiti Sains Malaysia.

A

Abdul Kudus, Muhammad Helmi (2012) Preparation, Characterization And Properties Of Multiwalled Carbon Nanotube-Alumina Hybrid Nanocomposites. Masters thesis, Universiti Sains Malaysia.

Abdullah, Che Wan NoorAkma (2012) Hydroxyapatite Coating On Magnesium Based Alloy For Bioimplant By Cold Spray Deposition Technique. Masters thesis, Universiti Sains Malaysia.

Alias, Asliza (2012) Preparation And Characterization Of Polyimide/Inorganic Composite Films As Solid Dielectrics. Masters thesis, Universiti Sains Malaysia.

Arbain, Roshaida (2012) Fine Grinding Of Hematite In Planetary Mill And Its Application As Dye Decolorization Catalyst. Masters thesis, Universiti Sains Malaysia.

Arbain, Roshaida (2012) Fine Grinding Of Hematite In Planetary Mill And Its Application As Dye Decolorization Catalyst. Masters thesis, Universiti Sains Malaysia.

Ashari, Aminullah (2012) Effect Of Fiber Composition On Mechanical And Physical Properties Of High Loading Wood Fiber Composites. Masters thesis, Universiti Sains Malaysia.

B

Bakir, Mohammed Luay (2012) Atomized Lead Free Solder Alloys For Solder Paste Product For Electronic Application. Masters thesis, Universiti Sains Malaysia.

Bun , Kim Ngun (2012) Characterization Of Cambodian Clays And Their Suitability For Ceramic Tiles Applications. PhD thesis, Universiti Sains Malaysia.

Bun , Kim Ngun (2012) Characterization Of Cambodian Clays And Their Suitability For Ceramic Tiles Applications. PhD thesis, Universiti Sains Malaysia.

C

Chin , Hui Shun (2012) Synthesis And Characterization Of Sb2O3 Nanoparticles By Chemical Reduction Method. Masters thesis, Universiti Sains Malaysia.

Chin , Hui Shun (2012) Synthesis And Characterization Of Sb2O3 Nanoparticles By Chemical Reduction Method. Masters thesis, Universiti Sains Malaysia.

F

Foo, Yin Lin Evon (2012) Fabrication And Properties Of Silica-Epoxy Thin Film Composite. Masters thesis, Universiti Sains Malaysia.

Foo , Yin Lin Evon (2012) Fabrication And Properties Of Silicaepoxy Thin Film Composite. Masters thesis, Universiti Sains Malaysia.

G

Ghalati, Reza Mohammadpour (2012) Effect Of Foundation Geometry On Short Abutment Scour. PhD thesis, Universiti Sains Malaysia.

Ghazali, Suriati (2012) Properties Of Silver-Filled Epoxy Composites For Electronic Application Using Synthesized And Commercial Silver Nanoparticles. PhD thesis, Universiti Sains Malaysia.

H

Hassin, Mohd Salihin (2012) Fabrication Of TiC-Reinforced Iron Based Composite Through Mechanical Activation And Carbothermal Reduction On Hematite And Anatase. Masters thesis, Universiti Sains Malaysia.

I

Ibrahim, Ismail (2012) The Interaction Of Feldspar, Mica And Quartz With Different Collectors During Froth Flotation. PhD thesis, Universiti Sains Malaysia.

J

Julkapli, Nurhidayatullaili Muhd (2012) Preparation And Characterization Of Cross Linked Chitosan Filled Chitosan Composites. PhD thesis, Universiti Sains Malaysia.

K

Kong, Kenneth Thean Soon (2012) Studies On The Processing And Properties Of Conductive Single Fillers And Hybrid Fillers Filled Silicone Elastomer Composites. Masters thesis, Universiti Sains Malaysia.

Kong , Siew Mui (2012) Mechanical And Thermal Properties Of Nanoparticles Filled Silicone Rubber Composites. Masters thesis, Universiti Sains Malaysia.

L

Lim, Patrick Wye Kheong (2012) Characterization Of Halogen-Free Core Material With Various Flame Retardants. Masters thesis, Universiti Sains Malaysia.

Looi, Yien Tyng (2012) Synthesis And Properties Of Highly Cross-Linked Polysiloxane For LED Encapsulant. Masters thesis, Universiti Sains Malaysia.

Looi , Yien Tyng (2012) Synthesis And Properties Of Highly Cross-Linked Polysiloxane For Led Encapsulant. Masters thesis, Universiti Sains Malaysia.

Low, Lay Foon (2012) Preparation And Characterization Of Epoxy Particlefilled Thermosetting Composites. Masters thesis, Universiti Sains Malaysia.

Low , Lay Foon (2012) Preparation And Characterization Of Epoxy Particlefilled Thermosetting Composites. Masters thesis, Universiti Sains Malaysia.

M

Mat Saad, Nurihal Hanim (2012) Effect Of Resistance Spot Welding Parameters On Copper And Brass. Masters thesis, Universiti Sains Malaysia.

Mazlan, Norkhairunnisa (2012) The Effect Of Oxidation Treatment Of MWCNT On The Properties Of PDMS Nanocomposite. PhD thesis, Universiti Sains Malaysia.

Mazuki, Norlailatullaili (2012) Effect Of Aluminium (Al) And Nickel (Ni) Addition On Formation Of Titanium Silicon Carbide (Ti3sic2) Via Arc Melting. Masters thesis, Universiti Sains Malaysia.

Mohd Shukri, Nurulizzati (2012) Mechanical And Thermal Properties Of Thermally Conductive Fillers Filled Polypropylene Composites. Masters thesis, Universiti Sains Malaysia.

N

Nguyen , Quang Duy (2012) Effects Of Filler Loading And Different Preparation Methods On The Properties Of Cassava Starch Filled Natural Rubber Composites. Masters thesis, Universiti Sains Malaysia.

O

Omar, Nurul Farhana (2012) The Curing Characteristics And Mechanical Properties Of Waste Tyre Dust And Waste Tyre Dust Hybrid Filled Natural Rubber Compounds. Masters thesis, Universiti Sains Malaysia.

R

Rasyid, Mohd Fadli Ahmad (2012) Preparation, Characterization And Properties Of Polypropylene/Muscovite Nanocomposite. Masters thesis, Universiti Sains Malaysia.

S

Saad, Nurihal Hanim Mat (2012) Effect Of Resistance Spot Welding Parameters On Copper And Brass. Masters thesis, Universiti Sains Malaysia.

Salleh, Siti Zuliana (2012) Halloysite Nanotubes/Natural Rubber (Hnts/Nr) Nanocomposites: Preparation And Properties. Masters thesis, Universiti Sains Malaysia.

Saw, Lian Na (2012) Fabrication And Properties Of Transparent, Conductive And Flexible Multi-Walled Carbon Nanotubes (Mwcnts)/Epoxy Composite Film. Masters thesis, Universiti Sains Malaysia.

T

Teoh, Poay Ling (2012) Synthesis Of Gold Nanorods Using The Seed Mediated Method And Its Conjugation With Antibody For Diagnostics Applications. Masters thesis, Universiti Sains Malaysia.

V

Vemal , Raja Manikam (2012) Fabrication And Characterization Of Ag-Al Die Attach Material For Sic-Based High Temperature Device. PhD thesis, Universiti Sains Malaysia.

W

Wong, Yew Hoong (2012) Investigation of simultaneous thermal oxidation and nitridation of sputtered zirconium on silicon and silicon carbide in nitrous oxide gas environment. PhD thesis, Universiti Sains Malaysia.

Wye Kheong, Patrick Lim (2012) Characterization Of Halogen-Free Core Material With Various Flame Retardants. Masters thesis, Universiti Sains Malaysia.

Y

Yusoff, Mahani (2012) Processing, Microstructure And Properties Of In Situ Copper Reinforced Tungsten Carbide Nanostructured Composite. PhD thesis, Universiti Sains Malaysia.