Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Bahan & Sumber Mineral (School of Material & Mineral Resource Engineering) > Monograph" and Year is 2018

Ab Han, Norfateha (2018) Weathering Classes In Relation To Physical And Mechanical Properties Of Decomposed Granite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Halim, Mohd Fahmi Hafiz (2018) Effect Of Spot Welding Processing Parameters On Ferrous And Non Ferrous Metal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abd Karim, Amirul Aiman (2018) Grindability Of Fine Particle Gold Ore Using Vertical Stirred Mill. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Aziz, Khairunnisa (2018) Epoxy-Polyamide-Methyl Ethyl Ketone Laminate Systems Simulation On The Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Halim, Muhammad Helmi (2018) Assessment Of Quarry Environmental Modeling Software Version 2.0 (QEMS V2.0) For Estimation Of Noise At Crusher Boundary. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Nashir, Mohd Khairul Nidzam (2018) Mineralogy And Geochemical Study Of Air Piau, Kelantan Gold Prospect (Drill Core). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahim, Ainul Afeeqah Athirah (2018) Manganese Removal In Groundwater Treatment Using High Grade Limestone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Rahman, Najihatul Nabihah (2018) Analysis Of Rock Fragmentation Using Wipfrag At Lafargeholcim Rawang Quarry, Selangor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Razak, Muhamad Syahizat (2018) Groundwater Exploration By Using Electrical Resistivity Survey. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdul Wahab, Haziq Mudzakir (2018) Effect Of High Temperature On Oxidation Behavior Of Superheater Materials Formation Of Protective Oxide Scale. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Abdullah, Noor Salihah (2018) Evaluation Of Hydroxyapatite From Fish Bone As Potential Protein Adsorber And Filler. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad, Nur Husna (2018) Study On The Relationship Between Tensile And Hardness Properties On Several Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ahmad Romil, Rozaida (2018) A Study On The Relationship Of Rock Strenght And Grindability Of Limestone, Granite And Metallic Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alaudin, Nur Asleena (2018) Self Assembly Gold Nanoparticles Modified Electrode For The Electrochemical Detection Of Mercury And Lead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Alaudin, Nur Asleena (2018) Self Assembly Gold Nanoparticles Modified Electrode For The Electrochemical Detection Of Mercury And Lead. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Alias, Nur Syahida (2018) Multicomponent Gas-Solid Reactions Kinetic Modelling Of NiOFe2O3 Reduction In Natural GAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ameer, Nur Dinie (2018) Evaluation Of Tin In Amang From Rahman Hydraulic Tin Sdn. Bhd. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Amiruddin, Atikah Zulaikha (2018) Soldering Characteristics And Corrosion Behaviour Of Indium Added To SAC305 Solder Alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Asri, Muhammad Anas (2018) Blasted ORE Fragmentation And Its Influence On Excavators Productivity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Awang Kechik, Nur Aliah Hazirah (2018) Effect Of Blast Designs On Rock Fragmentation At Lafarge Kanthan Quarry, Chemor, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azami, Khairunnisa Azalin (2018) Effect Of Electron Beam Irradiation Of High Density Polyethylenewaste Tire Powder (Hdpewtp) Blends On Processability, Tensile Properties And Morphological Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Azmi, Latifah Suha (2018) Physical And Chemical Characterization Of Iron Ore From East Coast Of Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Boey, Zhan Hei (2018) From Natural Bio-Resource Waste To Akermanite Bioceramics For Synthetic Bone Substitution. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Bunyam, Timothy Lambat (2018) Attempt To Reducing The Ground Vibration Level Due To Blasting Activity Based On The Evaluation Of Blasting Geometry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chai, Shir Ying (2018) Effect Of Different Type Of Isocyanates On The Properties Of Shape Memory Polyurethane Elastomer Based On Palm Kernel Oil Polyol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chamnek, Arvitcha (2018) Effect Of pH And Contact Time On The Adsorption Of Heavy Metals In Acid Mine Drainage Using Hydrated Lime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chang, Wan Ling (2018) Synthesis Of Zinc Selenide Quantum Dots By Successive Ionic Layer Adsorption And Reaction (SILAR) Method For Quantum Dot Sensitized Solar Cells (QDSSC). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chim, Jia Wen (2018) Quality Assessment Of 3d-Printed Plastic Parts Using Image Analysis Technique. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Choo, Hong Han (2018) Reactivation, Oxidation And Surface Functionalization Of Spent Activated Carbon For Glycerin Decolourization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chow, Li Chin (2018) Fabrication And Characterization Of Polylactic Acid (PLA) Blend Biomaterial Using 3D Printing For Potential Application In Tissue Engineering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chu, Chia Shin (2018) Fabrication Of Ti-40Nb-10HA Composite And Ti-40Nb Alloy With Surface Nanotubes For Implant Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Chua, Jing Ting (2018) Effect Of Fused Deposition Modelling Fabrication Parameters On The Tensile Properties Of Acrylonitrile Butadiene Styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Darryl Wong, Jun Chen (2018) The Impact Of Different Lateral Size Of Graphene Oxide On The Performance Of The Emulsified Acrylate-Based Pour Point Depressant And Its Application In Crude Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Faizul Hilma, Muhamad Nabil (2018) Preparation And Characterization Of Cnt/Epoxy Nanocomposites Using Colloidal Polymerization Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ghazali, Muhammad Faris Afdhal (2018) Adhesion Performance Of Solvent-Based Adhesive In Medical Tube. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hamdan, Nur Zafirah (2018) Curing Characteristics, Tensile And Morphological Properties Of Tea Waste Filled Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Hamizai @ Hamizzi, Mohamad Faiz (2018) Physical And Chemical Characterization Of Complex Gold Ore From Peranggih Deposit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ibrahim, Nur Fatin Nabila (2018) The Effect Of Various Compatibilizers On Properties Of Mengkuang Leaf Fibre Filled Poly (Lactic Acid) Composite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ishak, Atiikah (2018) Assessing Optical And Photocatalytic Properties Of Metal Coupled Ti02 Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ivon, Tiew (2018) Fish Bone Waste As Potential Source Of Apatite For Bone Replacement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Johari, Nurrahman (2018) The Analysis Of Particle Size Distribution (PSD) After Blasting Using Aerial Photography At Fys Marketing Sdn. Bhd., Bukit Mertajam, Penang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Johary, Muhammad Danial Mohd (2018) Impact Of Pour Point Depressant Enhanced With Graphene Oxide On Thermal And Microstructure Properties Of Simulated Crude Oil Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Juhari, Aisyah Shahirah (2018) Rock Slope Stability Analysis Using Photogrammetric Method At Hume Cement Quarry, Gopeng, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kamaruddin, Nur Izaani Akma (2018) The Effect Of Milling Time, Stirring Speed And Ball Mill To Powder Ratio Of Malaysian Tin Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Karim, Mohamad Afiffudin (2018) Formation And Durability Investigation On Graphene-Based Superhydrophobic Coating. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khazali, Mohamad Razif (2018) Geophysical Subsurface Gravity Survey Modeling Of Segamat- Kuantan Using Matlab. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Khong, Ling Xin (2018) Treatment Of Iron In Groundwater Using Pebble Size And Sand Size Marble Column Filter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Koay, Tze Yen (2018) Effect Of Cryogenic Treatment Prior To Equal Channel Angular Press (ECAP) Of Sac Solder. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Kong, Chee Xian (2018) Superior Hardness Of Zirconia Toughened Aluminaceramics Through Co-Addition Ofmagnesium Oxide Andlanthanum Oxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Lease, Jacqueline (2018) Electrochemical Characterization Of Lithium Vanadium Oxide Anode With Agar Binder In Aqueous Rechargeable Lithium Ion Batteries. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Liew, Xian Yun (2018) Development Of Bismuth Particles Modified Electrodes For Heavy Metal Sensors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Marobi, Mohammad Ajwad (2018) Surface Oxidation Of Copper For CuO Nanowires Formation And Their Catalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Masraff, Mimi Syahira (2018) Aligning Of Carbon Nanotubes With An External Electric Field To Improve Thermal Conductivity Of Polydimethylsiloxane Nanocomposites Interface Material. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mazlee, Muhammad Ihsan Firdaus (2018) Effect Of Various Grinding Mechanisms During Particle Production. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Meor Akil Julnasir, Nurwahidah (2018) Full Simulation Of Cycle Time Using Talpac Software At Lafarge Kanthan Quarry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Milus, Mohd. Nur Fahmie Ikhwan (2018) Numerical Investigation Of Non- Newtonian Fluid During Mold Filling Process With Phase Change Consideration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Muzaffar, Hud (2018) Physical And Chemical Characterization Of Malaysian Sulphide Gold Ore From East Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohamad Zaidi, Mohamad Za'im (2018) Hypochlorite Leaching Of Gold Ore. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohammed Kassim, Mohammed Zul Azeem (2018) The Effect Of Thickness Reduction On Microstructure And Mechanical Propertiesof Cold Rolled And Cryorolled Low Carbon Steel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Aaznan, Nur Aina Najeehah (2018) Removal Of Arsenic Using Synthetic Iron Oxyhydroxide. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Amir, Esmanizam Esmaly Eusainy (2018) Effects Of Hydrolysis Using Various Parameter For Recovery Of Reducing Sugar From Local Coconut Dregs. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Anuar, Siti Nur Nabilah (2018) Fabrication And Characterization Of Bioactive Glassalginate Scaffolds. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Ariffin, Mohamad Fadhlin (2018) Effect Of Acidic Calcium Phosphate Solution Concentration On The Setting Properties Of Porous Β-Tricalcium Phosphate Granular Cement. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Hilmi, Mohamad Suffian (2018) Processing Of Coarse Sand From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Johary, Muhammad Danial (2018) Impact Of Pour Point Depressant Enhanced With Graphene Oxide On Thermal And Microstructure Properties Of Simulated Crude Oil Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Safuan, Nurfarah Rasyidah (2018) Development Of Superhydrophobic And Self-Cleaning Surfaces Using Silane-Based Material And Cu-Doped TiO2 Nanoparticles For Ceramic Wall Tiles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohd Shah, Mohd Faizatul Shahrizal (2018) Investigation On Processing Parameter Of Single Screw Extrusion Using Experimental And Numerical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Mohmad Saridi, Mohamad Husaini (2018) Synthesis And Characterization Of Different Polyol Soft Segments In The Preparation Of Palm Kernel Oil Polyol Based Shape Memory Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad, Nor Syafiqah (2018) Corrosion Behavior Of Quenched SAC305 Solders. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Noor, Mohamad Ikhwan (2018) Effect Of Different Types Of Banana Plants Fibres On The Physical, Mechanical And Thermal Properties Of Agar Based Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhamad Zaki, Nur Amierah An-Nissa' (2018) Processing Of Heavy Minerals From Terengganu Silica Sand. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Muhammad, Amirul Asraf (2018) Mineral Liberation Studies Of Complex Gold Ore From Peranggih Prospect, Pahang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ng, Chi Loon (2018) Effects Of Halloysite Nanotube On The Mechanical, Thermal And Morphological Properties Of Polypropylenepolyamide Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nik Jusoh, Nik Anis Hafiza (2018) Effect Of ZnO Seed Layer On The Growth Of ZnO Nanorods Via Solution Precipitation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Nor Ashikin, Nor Fazreeniza (2018) Thermal And Rheological Properties Of 3D Printed Polylactic Acid Plasticized With Polyethylene Glycol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Norfaizal, Nurhafiz Syaza (2018) Comparison Of Different Types Of Sago Starch Dispersion And On Mechanical Properties Of Biodegradable NR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ong, Mun Yee (2018) Kinetics Of Crystallization For Polypropylene/Polyethylene/Halloysite Nanotube Nanocomposites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ooi, Lhaang Chee (2018) Effect Of Compaction Pressure And Addition Of Silicon On Microstructure And Compressive Properties Of Porous Magnesium. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Osman, Norainin Sofea (2018) Optimisation Of Apatite Bioceramic Formation From Waste Dental Mould. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Othman, Ainnur Hanim (2018) Hygrothermal And Wear Behaviour Of Short Carbon Fiber Reinforced Polycarbonate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Parameswaran, Vengadesh (2018) Processing Of Tin From Pegmatite. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Pelawang, Khairul Shazwan (2018) Prediction Of Blast-Induced Ground Vibration During Blasting At Lafarge Quarry Kanthan, Ipoh, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Perumal, Suchitra (2018) Simultaneous Hydrolysis-Leaching Of Synthetic Manganese Ore Using Bamboo Saw Dust And Computational Analysis Using Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rafie, Muhammad Akhmal Firdaus (2018) Modified Poly (Lactic Acid) (PLA) Filament For 3d Printing With Improved Thermal Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ramli, Norahasyima (2018) Crystallization Of Iron Oxide Nanotubes By Anodization And Their Relation To Photocatalytic Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Roslaili, Muhamad Zulhilmi (2018) One Way FSI Study Of The Stress And Strain Distribution On The Water Dam Spillway Stilling Basin Baffles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Abdul Fatah Zulkarnain (2018) Effect Of La2O3 Addition On The Hardness And Indentation Fracture Resistance Of Zta-Ceo2-La2o3 Ceramics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rosli, Mohamad Haikal (2018) Mineral Liberation Studies Of Complex Sulphide Gold Ore From Pahang, Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Rozailan, Nai'mah (2018) Fabrication And Characterization Of Denture Adhesive Filled Starches Containing Antimicrobial Agents. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Ruzlan, Muhammad Hakim (2018) Synthesis Of Polycrystalline Silicon Carbide Using Aluminum Carbide And Calcium Carbide With Silicon Tetrachloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sallehuddin, Nurul Jannah (2018) Effects Of Annealing Treatment On Thermal And Mechanical Properties Of Poly (Lactic Acid). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sardi, Nur Syamsinar (2018) Room Temperature Self-Healable Natural Rubber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Sarimon, Nurul Atikah (2018) Effect Of Silver On Sol-Gel Derived Bioglass System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Seow, Pek Ying (2018) Tensile Properties And Water Absorption Of Wood Sawdust Filled Polypropylene Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siew, Tuck Seong (2018) Fabrication Of Polysiloxane Based Stretchable Ink Filled With Silver Nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Siew, Tuck Seong (2018) Fabrication of polysiloxane based stretchable ink filled with silver nanoparticles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan Sumber Mineral. (Submitted)

Siti Aina Najian, Muhammad Zuber (2018) The Effects Of Different Plasticizers (Triacetin And Triethyl Citrate) On Polyvinyl Alcohol. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

So’od, Nurul Fazliniza (2018) Studies On The Effect Of Addition Modified Sago Starch On Mechanical Properties Of Natural Rubber And Synthetic Polyisoprene Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Syed Anwar Idid, Syed Mohd Syafiq Idid (2018) The Extraction Of Tin And Copper From Roasted Copper Dross (RCD) And Copper Dross (CD). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Thajudin, Nuur Laila Najwa (2018) Comparison Of Mechanical, Physical And Thermaproperties Of Conventional Plastics Fabricated Using 3D Printing And Injection Moulding. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wan Mohd Amin, Wan Abdur Rahman (2018) Evaluation Of Silicone Sealant Cure Characteristics Using A Fabricated Parallel Plate Rheometer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wan Saberi, Wan Ahmad Nazmi (2018) Hydrogeochemistry Characteristics Of Water And Stream Sediment Originated From Activities Surrounding Gunung Paku, Pengkalan Hulu, Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Chee Leong (2018) Synthesis And Characterization Of Manganese Dioxide Nanoparticles Via Direct Heating Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Jia Ying (2018) Effect Of Catalysts On The Formation Of Titanium Hydride Under Hydrogen Atmopshere. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Wong, Shi Chin (2018) Development Of Carbonated Hydroxyapatite (CHA) Porous Scaffolds For Bone Tissue Engineering Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Woo, Wei Jin (2018) Development Of Neem Modified ZnO Photocatalyst Incorporated LDPE For Antimicrobial Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yaacob, Solihin (2018) The Used Of UAV-Based Photogrammetry For Discontinuity Mapping At Hume Cement Quarry, Malim Nawar Perak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yap, Cia Ling (2018) Mechanical And Electrical Properties Of Short Carbon Fibre Reinforced Polycarbonate Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yap, Soon You (2018) Study The Synthesis Parameters And Effect Of Addition Of Acid Hydrolyzed Sago Starch On Mechanical Properties Of NR And XNBR Latex Films. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yeap, Kee Leong (2018) Aloe-Polysaccharides Thin Film As All-Natural And Flexible Resistive Random Access Memory. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Yew, Lih Wei (2018) Bioactive Glass Reinforced Polyurethane Scaffold Effect Of Hard Segment Content Of Polyurethane. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zabidi, Muhammad Afiq (2018) Physical And Chemical Characterization Of Tin In Amang From West Coast Peninsular Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zahari, Mohamad Abdul Aziz (2018) Effect of Magnesium ION (Mg2+) Substitution and Calcination to the Properties of Biphasic Calcium Phosphate (BCP). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zailan, Nur Nadhirah (2018) Characterization And Potential Industrial Appication Of Gypsum Rich Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)

Zulkifli, Aiman (2018) Carbonisation Of Dead Leaves Biomass As Activated Carbon For Potential Application As Reinforcement Filler In Natural Rubber Composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Bahan dan Sumber Mineral. (Submitted)