Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Monograph" and Year is 2019

Abdullah, Umar Mujahid (2019) Effects Of Nanoparticles Concentration To Transport Properties Of Nanofluids Using Molecular Dynamics Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adman, Amirul Akil (2019) The Effects Of Material Properties On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Adnan, Muhammad Zikri (2019) Design Optimization Using Numerical Simulation And Experimental Of Wind Energy Harvester Unit From Exhaust Fan. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Alexander, Tan Wai Teng (2019) Effect Of Error Augmentation Training Strategy On Engagement In Rehabilitation Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Amin, Ahmad Bulya Md (2019) Pedal Exercise Machine For Physical Rehabilitation Of Stroke Patients. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Anuar, Muhammad Akmal Adib (2019) Control Of Welding Robot Using Drone With Autopilot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Arumugam, Sagaathevan (2019) Development Of Sonic Air Flow Meter. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Awang, Muhamad Haidar (2019) Numerical Study Of Plate Heat Exchanger For Erema Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Lia Dayana Abdul (2019) Total Industrial Safety Culture In Manufacturing Sector. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Aziz, Muhammad Safwan Abdul (2019) Application Of The Dynamic Vibration Absorber To Reduce The Noise And Vibration Of The Automotive Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Basir, Nor Afiza Abdul (2019) Quality Analysis For Defect And Defective Component Parts On Printed Circuit Board (Pcb) Using Dmaic Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chai, Tying Tying (2019) Ferroelectric Thin Film Materials Deposition By Physical Vapor Deposition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chai, Yik Zhien (2019) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chandhira, Gajjhenthra Richard Raj @ (2019) Pin Transfer Of Epoxy Resin (Glycerin) On The Led Housing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chek, Muhammad Asyraf Wan (2019) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chiang, Han Xi (2019) Structural Analysis Of Thermoformed Electroluminescent Printed Lighting. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chiang, Xiao Tong (2019) Design And Development Of A Locking Mechanism For A Gear-Based Prosthetic Knee Joint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Chong, Jia Jun (2019) Influence Of Copper Pillar Bump Structure On Flip Chip Packaging During Reflow Soldering. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Daud, Nurul Ain Mat (2019) Effect Of Hole Size, Sheet Thickness And Material Type To The Performance Of The Self-Clinching Fastener. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fauzi, Muhammad Fahmi Hasifi Md (2019) Experimental Performance Of Humid Air Turbine Fueled By Biomass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Foo, Chun Yit (2019) The Effects Of Lubrication On The Rolling Contact Surface Deformation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Foo, Mun Yee (2019) Design Improvement For Replica Trophy Using Reverse Engineering And Cnc Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Fun, Seng Phan (2019) Modelling Of Mechanical Behaviour Of Electronics Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Gan, Zheng Ho (2019) Thermal Analysis Of Non-Newtonian Fluid Flow Over Superhydrophobic Surface. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ganesan, Raguvaran (2019) Vibration Analysis Of The Dam Physical Model Due To The Effect Of Water Spilling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Hanafiah, Amir Hamzah M. (2019) Application Of Autonomous Maintenance To Reduce Failure Rate Of Bearings In Food Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Heng, Jing (2019) Digitalization Of Operator Skill Competency By Development Of Information System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Iqbal, Ahmad Amir Shafiq Ahmad (2019) Mechanical Evaluation Of Femur Geometry And Hip Protectors Using Pendulum-Based System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Ahmad Norarif Amin (2019) The Vibration Analysis Of Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohd Azmi (2019) Experimental Investigation On A Desiccant Silica Bed for Dehumidification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohd Azmi (2019) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Mohd Azmi (2019) Heat Transfer Perfomance Of A Synthetic Jet Generated By Diffuser-Shaped Orifice. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Muhammad Dhirar As Suhaimi (2019) Three-Dimensional Fatigue Crack Growth Analysis Using Failure Mechanism Approach In Ansys. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Jamil, Nurul Izzati Mohamad (2019) Study on drawing die radius to load and thinning pattern of aluminium alloy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Juma’at, Mohamad Haziq (2019) Simulation Of Blood Flow Through Transcatheter Heart Valve (Thv) Using Ansys Fluid Structure Interaction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kamaluddin, Fazrullah (2019) Microwave Tar Thermal Cracking System For A 10kw Downdraft Gasifier. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kee, Seow Pei (2019) Brovey Transform Based Image Fusion For Impurities Segmentation And Detection On Edible Bird’s Nest. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Khor, Chong Hwa (2019) Classifying Indian Classical Dances By Motion Posture Patterns. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Kumar, Kesava Raj Vijaya (2019) Food Waste Carbonization Using Icrowave Oven. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lai, Pin Siew (2019) Data Mining On Retail Banking Simulation Model To Devise Productivity Improvement Strategies. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Latiffi, Nur Ainul Nurina Ishak (2019) Improving The Force Delivery Trend Of Nickel-Titanium Archwire In Orthodontic Bracket System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Hui Xin (2019) The Implementation Of Plan-Do-Check-Act Cycle To Improve The Production Line Productivity In Surface Mounted Technology Area Of Industry. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lee, Ming Wei (2019) Design Improvement Of Photobioreactor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Lo, Thye Wei Clarence (2019) Effect Of Draw Bead Geometry And Applied Force To Drawing Of Aluminium AA6061. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Loh, Yuan Ting (2019) Tribological Property Of Road Marking Paint. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mahyuddin, Muhammad Syahir (2019) Development Of Hydraulic Regenerative Braking Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Marzuki, Nur Aimi Amanina Mohd (2019) Implications Of Pressure And Range Of Motion On Posterior Fixation Of Thoracolumbar Burst Fractures. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Megat, Nik Muhammad Ashraf Che (2019) Development Of Linkage Mechanism For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Mitchelle, Law Jyy Jinn (2019) Implementation Of Proportional, Integral And Derivative(Pid) Terms For Thermal Management Through Simulink And Arduino Platform. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Munnian, Ruthrakumar (2019) Analysis Of Failure In Offline English Alphabet Recognition With Data Mining Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Md Khidir Amin Md (2019) Study Of Physiochemical Characteristics Of EFB Briquettes And Its Potential Use As Dual Feul In Cvcc. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Mohammad Nazmi Mohammad (2019) Silica gel multilayer desiccant hollow cylinder bed for axial flow dehumidification adsorption operations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nasir, Muhammad Amin Zaquan Mohd (2019) Uph Improvement On Production Line A Case Study. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ng, Eng Yeong (2019) Pretrained Convolutional Neural Networks As Feature Extrator Of Eggshell Mottling Pattern For Quality Inspection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ngo, Yi Bin (2019) Development Of Ultrasonic Scalpel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Nordin, Mohd Zuhairi (2019) Combustion Stability Analysis Using Vegetable Oil In Micro Gas Turbine Combustion Chamber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ong, Xhin Jie (2019) Design Of Ankle Foot Orthosis (Afo) Using 3d Printing For Patient Comfort And Agility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ooi, Yi Jing (2019) Relationship Of Tribological Property Of Different Flooring Textures On Human Mobility. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Oon, Bee Mun (2019) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Poon, Heong Wai (2019) Evaluation Of Stress Relaxation In Bentonite Filled Rubber Under Tensile Load Using Scanner Based Digital Image Correlation Method. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ramli, Muhammad Faiz (2019) Development Of Hydraulic Launch Assist Testbench. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Rasidi, Nazirul Asyraff (2019) Application Of Internet Of Things (Iot) On Controlled Vertical Agriculture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Saifuddin, Siti Adawiyyah Siddiqa (2019) Development Of Artificial Intelligence (Ai) For Image Processing And Conceptual Distance Computation From Camera For Pick And Place Of Oil Palm Fresh Fruit Bunch (Ffb). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sam, Jun Kok (2019) Control Of 3d Printer Using Drone With Autopilot And Raspberry Pi Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shaari, Mohd Farhan (2019) Performance Study Of Kitchen Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Shaharudin, Akmarul Hisham (2019) Thermoelectric Power System From A Liquid-Fueled-Fired Porous Burner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sidek, Nur Shafikah (2019) Design And Fabrication Of Chevron-Notch Plain-Strain Fracture Toughness Testing System For Metallic Materials. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Sulaiman, Mohammad Shah Affandi (2019) Combustion Characteristics Of A Swirl Combustor Operating On Kerosene Vegetable Cooking Oil (Vco) Fuel Blends. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tai, Pei Li (2019) Design And Development Of An Ankle Joint Rotator For Lower Limb Prosthesis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Hann Woei (2019) Classification Analysis Of Sleep Quality On The Active Performance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Jian Xin (2019) Construction Of Hybrid Geometric Modelling For Injection Mould Using Cadcam System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Pe Hao (2019) Assessment Of Fabric Waste As Fuel In Biomass Gasification System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Sak Jie (2019) Active Vibration Control Of The Suspended Handle Using Inertia-Type Piezoelectric Actuator. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Su Sze (2019) Data Mining On Machine Breakdowns And Effectiveness Of Scheduled Maintenance. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Yong Ren (2019) The main factors affecting key characteristics of fuel-efficient driving and safe driving. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Taufik, Rais Ahmad (2019) Scalable Fabrication Of Nickel Micropillars Using Ultra-Violet Photolithography Process For Microelectronics Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Toh, Han Yaung (2019) Moiré Method Based Tilt Sensing System For Landslides Monitoring Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Too, Mei Xian (2019) Effect of machining parameters on the surface finish quality of natural fiber composites. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Voon, Zhen Liang (2019) Vibration And Noise Attenuation On A Straight Chain Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wahab, Andyqa Abdul (2019) Experimental Investigation On The Performance Of Regeneration For Axial Flow Multilayer Silica Gel Hollow Cylinder Desiccant Bed. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wahidon, Amirul Faez (2019) Experimental Modelling And Control Of Pneumatic Cylinder For Manufacturing Applications. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Wong, Ci Qian (2019) Development Of A Material Delivery System Of 3d Printing Used For Building Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Mew Yaw (2019) Numerical Simulation On The Performances And Emissions Of The Direct Injection Compression Ignition Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yap, Woan Wei (2019) Conceptual Analysis Of Lean Manufacturing (Lm) Principles For Small And Medium Enterprise (Sme). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yeo, Ying Heng (2019) Diesel Engine Control And In-Cylinder Peak Pressure Monitoring System Using Raspberry PI. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yusof, Wan Putera Saidina Umar Wan (2019) Fluid-Structure Interaction (Fsi) And Sediment Transport Study Of Tnb Hydropower Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Yusoff, Nur Maisara Mohamed (2019) Effect Of Pressure And Droplet Number On Smt Adhesive Dispensing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)