Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Mekanikal (School of Mechanical Engineering) > Monograph" and Year is 2018

Monograph

Aaron Ting, Zai Chiun (2018) Development Of Fuel Consumption Map Of A Myvi Engine Running On A Mixture Of RON 95 And RON 97 Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ab Azid, Nor Azianti (2018) Conceptual Analysis Of Total Productive Maintenance (TPM) And Reliability Centered Maintenance (RCM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abd Aziz, Muhamad Syaiful Akmal (2018) Application Of Internet Of Things On Temperature Measuring System On Wafer Furnace Sintering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abd Rahman, Mohammad Fairuz (2018) Characteristics Study Of EFB Briquettes And Its Potential Use As Dual Fuel In CVCC. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Malek, Noor Atikah (2018) Investigation On Hybrid Geometric Modelling Construction For Injection Mould Using CAD System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Abdul Rahim, Nur Adibah (2018) A Single Unit Concept And Design Of A High Maneuverability Mobile Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ahmad Sobri, Ammar Solehi (2018) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig Humidity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Akashah, Akmal Rafiq (2018) Effectiveness Of Variable Stent Designs For Treatment Of Renal Artery Aneurysm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Amrik Singh, Dalbir Singh Banwait (2018) Development Of Lower Limb Stroke Rehabilitation Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Arbain, Azizi (2018) Measurement And Management Of Energy Usage In School Of Mechanical Engineering USM. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Aziz, Asyraf Hasif (2018) Numerical Analysis Of Ultra-Fine Package Assembly With SAC305-TiO2 Nano-Reinforced Lead Free Solder At Different Peak Temperature. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azman, Amirul Azim (2018) Development And Characterization Of Biomass Steam Boiler For Externally Fired Micro Gas Turbine (EFMGT) System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azmi, Amirul Asraf (2018) Supply Chain Management And Performance At Case Study Company. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Azreezul, Azrul Zhafran (2018) Time-Lapse Of Plant Movement Classification. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Boey, Keen Huang (2018) A Comparison Of The Different Algorithms For Essential Tremor And Parkinson’s Disease Tremor Differentiation Based On Hand Tremor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chang, Fan Ru (2018) Water And Salt Water Absorption, Hygrothermal And Tribological Propertires Of Nickel Zinc Ferrite Magnetorheological Elastomers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chia, Yong Ham (2018) The Effect Of Various Carbonization Temperature And Duration On The Food Using Microwave Food Waste Carbonizer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chik, Nur Aishah (2018) A Study Of Integrated CAD/CAM System With CNC Desktop Machine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chin, Han Chuan (2018) Performance Of A Hydraulic Ram Pump. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Chua, Khai Shen (2018) The Application Of The DMAIC Techniques For Business Performances Case Study For Open Defect Of Single-Sided Flexible Circuit Board. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

D'raj, Joshua (2018) Biomechanical Testing Of Hip Protectors. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Fadzil, Mohammad Azhar (2018) The Study Of Physiochemical Properties And Spraying Characteristics Of Hybrid Biofuel For Compression Ignition (CI) Engine Application. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamdan, Muhammad Hidayat (2018) Characterization Of The Noise And Vibration Patterns Of The Vehicle HVAC System Under Various Operating Condition. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Hamzah, Muhammad Al Amien (2018) Development Of A Meso-Scale Combustor For Liquid Fuel Combustion. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ho, Zhe Wei (2018) Classification Analysis Of The Badminton Five Directional Lunges. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Illuni Islamiah (2018) Wear And Friction On Gimbal Sealant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Mohamad Hanif (2018) Environmental Control For Catfish Drying House Using Raspberry PI Microcontroller. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Nazri (2018) Sound Absorption Study Of Three-Dimensional Printed Micro-Perforated Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ibrahim, Nurul Hakimi (2018) Design And Development Of Basic Teaching Modules For Open Source JaamSim Discrete Event Simulation Software. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ilias, Muhammad Ikmal (2018) Structural And Reliability Analysis Of Solder Joint Under Vibration Loading. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Mohd Azmi (2018) Effect Of Nozzle Rotation Angles And Sizes On Thermal Characteristic Of Swirl Anti-Icing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Ismail, Nur Amirah (2018) Thermoforming Process Simulation Of Stretchable Electronic Circuit. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ismail, Nurul Aqilah (2018) Gasoline Quality Monitoring Via Vehicle OBD Data Analysis. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Iswady, Fateen Adibah (2018) Wear And Friction On Loaded Conveyor Belt. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Jafri, Muhammad Nabil Asyraf (2018) Analysis Of Artificial Signals Of CPS, Spark Timing, And Fuel Injection Timing Toward The Engine Behaviour. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Joshua Wong, Jia Yi (2018) Design And Study Of Spinning Sea Wave Point Absorber. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kai Li, Gwee (2018) Optimization Of Lighting Parameters For Edible Bird's Nest Vision Inspection System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kang, Jing Yong (2018) Foot Orthosis For Patients With Diabetic Foot Ulcer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kathirvelu, Vemal (2018) Development Of Apps For Predictive Maintenance System A Case Study In HP. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Kee, Tze Shen (2018) Optimizing 3D Printing Parameters For Best Mechanical Properties. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Khiew, Fook Yun (2018) Development Of Decision Support System For Scheduling Machine Loading By Using Microsoft Office. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lau, Dick Mun (2018) Developing Mobile Application For Generic Human-Machine Communication. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Law, Khuan Foo (2018) Measurement Of Engagement And Cortical Reorganization In Brains Of Stroke Patients Via Electroencephalography (EEG) As A Result Of Visual Feedback Therapy. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lee, Han Wei (2018) Analysis Of The Ultrasonic Cautery. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Leslie Kneoh, Yen Sing (2018) Feedback Control Of Inverted Pendulum Using Raspberry Pi Microcontroller And Arduino UNO. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Ching Hock (2018) Performance Characteristics Of Car Alternator Coupled Directly To Micro Gas Turbine (MGT). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Lim, Li Zi (2018) Lean Six Sigma Game App For Android. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ling, Siok Mei (2018) Computational And Experimental Study On Horizontal-Axis Wind Turbine Slotted Blade Design. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mak, Kam Sheng (2018) Simulation Of Preventive Maintenance Schedule In Reducing Machine Stoppage And Downtime. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Md Isa, Mohamad Syazwan (2018) Application Of The Structural Dynamic Modification (SDM) Method To Reduce Noise And Vibration Of Vehicle Hvac System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad, Nurnadia Azwa (2018) Investigation On The Effect Of Dry Turning On AISI 305 Steel With Ceramic Inserts By Analysis Of Workpiece Surface Profile. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Hanifah, Mohamad Farhan (2018) The Study Of Vibration Motion Of Honey Kuih Loyang Mold Frame. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamad Rafdzi, Muhammad Farid (2018) Influence Of Material Properties On The Aperture Filling During Stencil Printing Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohamed, Muhammad Aizuddin (2018) Research Of Screw Expeller On Oil Palm Seed: A CFD Study On Barrel Zone. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohammad Musa, Mohammad Taufiq Haiqal (2018) Design And Fabrication Of Shape Memory Device. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Adnan, Muhammad Aimi (2018) The Use Of Response Surface Methodology (RSM) To Optimize The Twist Drill Geometry In Single Shot Drilling Of Stacked Alumina-Carbon Composite Layer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Azam, Muhammad Azfar Razin (2018) On The Performance Of The Motorcycle Engine Using Filtered Recycle Lubricant Oil. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mohd Shukor, Nurzayani Nabilah (2018) Design Innovation For Replica Trophy Using Reverse Engineering And CNC Machining. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhamad Yusli, Siti Rosyada (2018) The Numerical Comparison Study On The Effect Of The Anti-Icing Methods On Thermal Stress Distribution Of Nacelle Lip-Skin. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhammad Rafiq, Mohammad Sabri (2018) Effect Of Temperature On Flexible Printed Circuit Board During Reflow Soldering Process. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Muhammad Shafeeq, Abdul Hannan (2018) Two-Dimensional Fatigue Crack Growth Analysis Using Extended Finite Element Method (XFEM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Mustaffa Kamal, Muzhaffar (2018) Design And Development Of A Tensile Split Hopkinson Gas Gun. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nazry, Farah Aisyah (2018) Computational Fluid Dynamics Of Urinary Catheterization. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Norisam, Norsofea (2018) Precision Hole-Making On Composite Panel-Effect To Productivity And Quality. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Nur Zawani Syifaa, Mohd Muzaini (2018) Dewatering Method For Food And Kitchen Waste. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Mei Kiem (2018) A Study On Mechanical Behaviour Of Lead-Free Solder Using Nanoindentation Test. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ong, Sin Joo (2018) Developing Android Application To Guide Lean Six Sigma PDCA Project. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Pauzi, Adha Fahmi (2018) Experimental Of Tailor Welded Blanks Fabricated Using Friction Stir Welding (FSW). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Peh, Ching Guan (2018) Development Of Electronically Controlled Common Rail Fuel Injection System And Optimization Of Injector Parameters In Single Cylinder Diesel Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Poo, Chee Shen (2018) Performance Characteristic Of Single Stage Micro Gas Turbine (MGT) Running On Liquid Biofuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rajasagaran, Kogulan (2018) Noise And Vibration Study Of Commercial Conveyor System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Ramli, Mohd Akmal (2018) Mems In Control Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razak, Muhammad Ariff Solehin (2018) Numerical Study Of The In-Cylinder Air Flow Characteristic Generated By GVD For Air-Fuel Mixing Improvement Using Emulsified Biofuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Razali, Muhammad Safuan (2018) Thermoelectric Power System From A Liquid-Fueled Combustor. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Rosli, Muhammad Hisyamuddin (2018) Parallel Solvers Using PETSc For Nonlinear Conduction Problems In Higher Dimensions. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sahar, Nurhamizah (2018) Heat Transfer In Staggered Oblique Fin Microchannels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sahrudin, Intan Norshalina (2018) Experimental On Sulfur Reduction Process For Waste Product And Biodiesel Fuel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sani, Muhammad Qayum (2018) Effects Of Octane Rating Of Commercially Available Gasoline Fuel On Engine Performance, Emissions And Combustion Characteristic In Spark Ignition (SI) Engine. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Shamsudin, Siti Nor Atiqah (2018) A Study On Overall Equipment Effectiveness (OEE) For Performance Measurement Case Study For Surface Mount Technology (SMT) Department. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Sobri, Ammar Solehi Ahmad (2018) Experimental Study Of The Effect Of Piccolo Tube Pipe On The Air-Conditioning Experimental Rig Humidity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanik. (Submitted)

Tan, Han Peng (2018) Parallel And Series Electric Hybrid Vehicle Simulation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Wai Yee (2018) Development Of A New Method To Measure The Creep Behavior Of Rubber With The Addition Of Bentonite Based On Scanner-Based Image Processing. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tan, Yan Xu (2018) Developing Flow In Microchannel Having Regular Microstructure. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tang, Jau Hoong (2018) Knowledge Discovery Of Noise Level In Lecture Rooms. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tarmizi, Illma Laili Yasmin (2018) Design And Fabrication Of Semi-Auto Wafer Scriber For 4-In And 8-In Wafers. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Chee Haw (2018) Development Of Linkage Mechansim For In-Pipe Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Chin Keng (2018) Design And Fabrication Of Spin Coating System For 8-Inch Wafer. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Teoh, Jing Xiang (2018) Design And Study Of Domestic Cooling System Through Roof Ventilation Assisted By Evaporative Cooling. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Tong, Wen Le (2018) Mechanical Evaluation Of Locking Compression Plate. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wan, Dun Ye (2018) Study Of Engine Performance And Emissions Characteristics Of A SI Engine Fueled With Different Octane Rating Gasoline. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Hsueh Chung (2018) Classification Of Eggshell Translucent Areas For Quality Determination Using Alexnet. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Wong, Jen Nyap (2018) Simulation Of Active Force Control Using Intelligent Methods To Reduce Vibration Of The Suspended Handle. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yap, Eng Sam (2018) Mixing In Microchannel Patterned With Superhydrophobic Surfaces. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yap, Pooi Yee (2018) Study On Various Adhesion Mechanism For A Wall Climbing Robot. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yeoh, Sze Chee (2018) Vibration Attenuation On Vacuum Cleaner By Rubber Mount. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Yusri, Muhammed Aqel (2018) Development And Performance Characteristics Of A Swirl Combustor Operating On VCO-Blended Fuels. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zafrullah, Muhammad Naseeruddin (2018) Low-Cost Retrofit Hybrid System For Myvi. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zainal Abiden, Zabeer Abhar (2018) The Performance Of Steam Engine System With Retrofitted Reciprocating Engines. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Aliff Danial (2018) Design Of Multi-Service Access Node (MSAN) Roadside Cabinet Battery Compartment Lock. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkifli, Zikri (2018) Design And Fabrication Of A Projectionlithography Machine For The Application Of Microfluidic Pattern Using Commercially Available UV LED. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Zulkurnain, Amru (2018) Effect Of Thermal Energy On The Filling Time Of Composite Encapsulant Underfilling Process With Various Filler Loading Of Nano Silica Filler Particles. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Mekanikal. (Submitted)

Thesis

Mohamed Hanafee, Ameer Mohamed Abdeel Aziz (2018) Integration Of Machine Vision In Industrial Robot For Automated Composite Panel Punching. Masters thesis, Universiti Sains Malaysia.