Items where Division is "Kampus Kejuruteraan (Engineering Campus) > Pusat Pengajian Kejuruteraan Awam (School of Civil Engineering) > Monograph" and Year is 2017

Monograph

Adenan, SSaidatul Husna Mohamed (2017) Experimental Investigation Of Pedestrian Flow Through A Corridor With Corner. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Adha, Nor Amelia (2017) Cost Comparison Of Seismic Design For Reinforced Concrete Building Under Ranau Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aidy, Siti Hajar Noor (2017) Seismic Evaluation Of Low To Meduim Rise Of Regular Rc Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Akashah, Muhammad Amirul (2017) Productivity Of Construction Projects With Industrialized Building System (IBS) Technology Adoption. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Alexander, Yeo Ming Ming (2017) Development Of A Numerical Model For The Simulation Of Mudflow Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Apilin, Nur Shuhada (2017) Effect Of Polypropylene Fiber On The Properties Of Mortar Containing Silica Fume. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Aziz, Fatin Nur Ayuni Abd (2017) Ground improvement method using rubber shredded and acrylonitrile butadiene styrene. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bashah, Siti Fatin Qhalilah Osman (2017) Assessment Of Damage Index For Reinforced Concrete Frames Subjected To Seismic Excitations. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Besenun, Nur Farah Shahirah (2017) Comparative Subsurface Characterization Of The Quaternary And Residual Sites In Northern Peninsular Malaysia By Cumulative SPT(N) For Assesing Concrete Pile Foundat. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Bukhori, Muhammad Azzim (2017) Activated Carbon, Limestone And Alginate As A Composite Adsorbent For River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Dinail, Nurul Juliyana (2017) Determination Of Mannings Coefficient For Modular Channel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ehsan, Nurul Syazwani Mohamad (2017) An Experimental Study Of Natural Frequency Of Damaged Cable Net Supported Facade Panel. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Farouk, Mohamad Zulhilmi (2017) The Efficiency Of A Depressed Gully Inlet Of A Malaysian Drain. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Faudzi, Siti Multazimah Mohamad (2017) 2D Simulation Of Sultan Abu Bakar Dam Release Using HEC-RAS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Goh, Xiao Wen (2017) Effects Of Aging Condition, Preconditioned Temperature And Anti-Stripping Agent On The Adhesive And Cohesive Behaviour Of Asphalt Binder And Mastics. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Govindasamy, Darvintharen (2017) A Study On The Suitable Compaction Method For Physical Slope Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Gunasegar, Denesh (2017) Green Kerb – Green Technology Technique In The Development Of Alternatives Kerb Using Old Tire. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Halid, Nur Fatin Hanani Mohd (2017) Formation Of Trihalomethanes In Surface Water And Groundwater By Using Chlorine And Chlorine Dioxide As Disinfectant. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hamid, Nur Haziqah Mohd (2017) Prediction Of PM10 Using Multiple Linear Regression And Boosted Regression Trees. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Hassan, Nur Munira (2017) Seismic Analysis Of Irregular Reinforced Concrete Building. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Humayunkabir, Sheikh Hazwan (2017) Experimental Investigation On The Load Carrying Capacity Of Modified Purlin To Rafter Connection. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ibrahim, Nor Azlin Ali @ (2017) Verification Of CPTU Soil Types By USCS. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Isa, Azyrul Haffiz Mat (2017) Gated Spillway Hydraulic Modelling Of Sultan Abu Bakar (SAB) Dam And The Gated Spillway. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Hafizahizzati (2017) Prediction Of PM10 Concentration Using Multiple Linear Regression And Bayesian Model Averaging. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Mohammad Fikri (2017) Effects Of Plastering And Glass Fibre Reinforced Polymer (Gfrp) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ismail, Nurul Jannah (2017) Probable Maximum Precipitation Estimation Using Statistical Approach. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Jamberi, Aqilah (2017) Numerical Investigation On The Strengthening Work Of Transmission Tower. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Junit, Syarifah Nurhanani Syed (2017) Application Of Chitosan As A Natural Coagulant In Groundwater Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kam, Pui Kuan (2017) Effects Of Anti-Stripping Additives On The Moisture Sensitivity Of Asphalt Mixtures Subjected To Several Conditioning Methods. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kamaruddin, Muhamad Al-Amin (2017) Indoor Outdoor Relationship Of Fine Particles (PM2.5) IN School Classroom. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kasehyani, Nur Hanis (2017) Effect Of Corner On Evacuation Behaviour During Building Egress By Using Dem-Based Multi Agent Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kassim, Maimunah Abu (2017) Variability And Rainfall Against Slope Failure For Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Khudria, Nur Atiqah Mohamad (2017) Degradation Of Dyes (Methylene Blue) Using Natural Rubber Incorporated With Silver Nanoparticles In Water Treatment Tank. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Kua, Chin Tong (2017) Determination Of Flood Load On Bridge Deck. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lani, Anuar Effendy Mat (2017) Radial Gate Hydraulic Modelling Of Sultan Abu Bakar DAM, Cameron Highland. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lau, Ji Wei (2017) Seismic Fragility Assessment Of Moment-Resisting Concrete Frame With Setback Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Chin Jie (2017) Analysis And Simulation Of Pedestrian Walking Characteristic At Kuala Lumpur City Centre Underground Train Station. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Kenth Zheng (2017) Shear Behaviour Of Perforated Cold-Formed Steel Section. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lee, Mei Ting (2017) Engineering Properties Of Warm Mix Asphalt Incorporating Fly Ash. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Leong, Weng Woh (2017) Behaviour Of Selected Criteria Air Pollutants During High Particulate Event. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Lim, Yon Sheng (2017) Bending Behaviour Of Cold Formed Steel Structural Member With Perforated Section In House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mah, Chia Ling (2017) The Behaviour Of LNAPL In Sand Due To Precipitation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Marzuki, Noradila (2017) Study Of GAP Acceptance For Yield-Controlled Left-Turning Lane At Signalised Intersections. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohamed, Nurul Atiqah (2017) Stress-Strain Response Of Full Scale Rubberized Reinforced Concrete Column Under Vertical Load. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mohd Khairun Nizar Mohd Tajudin, Mohd Khairun Nizar Mohd (2017) Numerical Analysis Study Of Sarawak Barrage River Bed Erosion And Scouring By Using Smooth Particle Hydrodynamic (SPH). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mudzrab, Fitri Mahamad (2017) A Study Of Building Automation System (Bas)- A Case Study At The School Of Civil Engineering, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Nur Fatin (2017) Analysis On Distraction While Driving- A Case Study On Staffs And Students Of Engineering Campus, Universiti Sains Malaysia. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Mustafa, Zafira Nur Ezzati (2017) Buckling Capacity Of Cold-Formed Steel Structure Column Member With Perforation Section In Affordable House Framing System. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagalinggam, Tanagaraj (2017) Treatment Of Palm Oil Mill Effluent Odour Using Biofilter From Compost And Wood Chips Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nagendran, Sharan Kumar (2017) Rippability Assessment In Hilly Terrain Of Weathered Sedimentary Rock Mass. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nathan, Pavanithan (2017) The Effect Of Aggregate Types On The Performance Of Asphalt Mixture Incorporating Silane Additive Zycotherm. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Nazir, Amni Umirah Mohamad (2017) Relative Humidity And Temperature Effect On Biological Contaminant At Public Access Building In Seberang Perai Selatan, Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Ong, Zhi Jia (2017) An Investigation On Construction Sequence Of Irregular Single Layer Prism Tensegrity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Paid, Norazilah Mohamed (2017) Reliability Of Rapid Penang Operation In Mixed Traffic Situation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Prakas, Kumaravelu (2017) Study On The Characteristic Of Marine Dredged Sediment At Lumut Using Admixture. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Puzi, Nurul Fathiha Mohd (2017) The Effect Of Location For On-Site Detention (OSD) On Peak Attenuation Using Stormwater Management Model. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Rozi, Norainna Che (2017) Trihalomethanes Formation Potential In Groundwater And Surface Water. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Salleh, Nur Aisyah Farhanah (2017) Removal Of Iron And Manganese Using Ejectors And Roughing Filter Media. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sazali, Mohd Asnizam (2017) Aquifer Characterization And Groundwater Potential Evaluation In The Sedimentary Rock Formation. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Sin, Jing Yao (2017) Characterization And Behaviour Of Silicon Dioxide Nanoparticles In Chemical Mechanical Polishing Wastewater With The Presence Of Ferrous Sulphate And Polyaluminium Chloride. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tai, Joon Hong (2017) Assessment Of The Performance Loss And Repairabiity Of Earthquake Damaged Reinforced Concrete Buildings Under Repeated Earthquake. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tan, Jin Sheng (2017) The Behaviour Of LNAPL In Sand Due To Fluctuating Groundwater. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Taufik, Ruzainah Ahmad (2017) Spatial Analysis On Strong Winds Occurrence In The Northern Regionmalaysia Based On Interpolated Wind Speed And Wind Direction Map. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Teruna, Izzul Akmal (2017) Performance Of Composite Adsorbent In River Water Treatment. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Thai, Kim Sing (2017) Effect Of High Strength Concrete On Capacity Of Prestressed Beam For Bridge Construction. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Tiffany, Ting Feng Nee (2017) Rural Area Development By Understanding Basic Infrastructure Needs Through Local Survey In Sibu, Sarawak. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Voon, Sze Nee (2017) Flexible Scheduling For Construction Project Using Fuzzy Logic Method And Critical Path Method (CPM). Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Wahab, Muhammad Fikri Abd (2017) Removal Of Solids, Total Coliform, E.Coli, Uv254, Colour And Turbidity Using Zeolite Filter In Riverbank Filtration. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yunus, Nurul Yasarah Mohd (2017) A Study On The Extent Of Pond Accumulation Influence On Roadss Hydroplaning Phenomenon. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusof, Mohd Anuar Mohd (2017) Effect Of Plastering And Carbon Fibre Reinforced Polymer (CFRP) On Concrete Masonry Prism Strength Capacity. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Yusoff, Muhammad Firdaus (2017) Awareness Study On The Quality Assessment System In Construction (Qlassic) For Construction Works In Pulau Pinang. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zakaria, Muhammad Norshazril Alif (2017) Thermal Comfort And Its Relation To Ventilation Approaches In Mosques. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zauki, Wan Nadhira Shaqina Wan (2017) Analysis Of Walking Accessibility To Rapid Penang Bus Services (Route 303) In Penang Island. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zulkifly, Natasha Amiera Mohd (2017) Landfill Leachate Treatment Using Nano Composite Adsorbent. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)

Zuraidi, Wan Muhammad Adib Wan (2017) Performance Of Actual And Laboratory Horizontal Roughing Filter For Turbidity And E.COLI Removal. Project Report. Universiti Sains Malaysia, Pusat Pengajian Kejuruteraan Awam. (Submitted)